All MIBs › CISCO-RHINO-MIB › clsEnetPortDuplex
clsEnetPortDuplex
Module: CISCO-RHINO-MIB
OID (symbolic): CISCO-RHINO-MIB::clsEnetPortDuplex
OID (numeric): 1.3.6.1.4.1.9.5.11.1.6.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Indicates whether the port is operating in half-duplex, full-duplex, or auto mode. If the port could not agree with the far end on port duplex, the port will be in auto(2) mode. Unknown(1) indicates either the port does not support duplex mode, or the duplex mode is none of the defined.
What is clsEnetPortDuplex?
Reports and allows configuration of an Ethernet port's duplex mode (half, full, or auto); shows auto(2) when duplex negotiation with the far end fails and unknown(1) when the state cannot be determined.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.5.11.1.6.1.1.1 snmpwalk -v2c -c public <target> CISCO-RHINO-MIB::clsEnetPortDuplex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.5.11.1.6.1.1.1.1 snmpget -v2c -c public <target> CISCO-RHINO-MIB::clsEnetPortDuplex.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.5.11.1.6.1.1.1.1 i <value>
Start monitoring Cisco LightStream 1010 (Rhino) ATM switch (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-RHINO-MIB::clsEnetPortDuplex OID value, configure state conditions and alerts, and monitor any Cisco LightStream 1010 (Rhino) ATM switch (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.5 | workgroup | CISCO-ES-STACK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.5.11 | ciscoLS1010ChassisMIB | CISCO-RHINO-MIB |
| 1.3.6.1.4.1.9.5.11.1 | ciscoLS1010ChassisMIBObjects | CISCO-RHINO-MIB |
| 1.3.6.1.4.1.9.5.11.1.6 | clsEnetPortGroup | CISCO-RHINO-MIB |
| 1.3.6.1.4.1.9.5.11.1.6.1 | clsEnetPortTable | CISCO-RHINO-MIB |
| 1.3.6.1.4.1.9.5.11.1.6.1.1 | clsEnetPortEntry | CISCO-RHINO-MIB |
| 1.3.6.1.4.1.9.5.11.1.6.1.1.1 | clsEnetPortDuplex | CISCO-RHINO-MIB |