All MIBs › CISCO-LWAPP-INTERFACE-MIB › clInterfaceQuarantineVlanId
clInterfaceQuarantineVlanId
Module: CISCO-LWAPP-INTERFACE-MIB
OID (symbolic): CISCO-LWAPP-INTERFACE-MIB::clInterfaceQuarantineVlanId
OID (numeric): 1.3.6.1.4.1.9.9.686.1.1.1.1.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This object specifies the quarantine VLAN id of the interface. If the value is zero,then it means the interface is non-quarantine and the client traffic through this interface need not pass through any security checks. If the value is non-zero, then it means the interface is quarantine and the client traffic through this interface should pass through the security check and there should be an access VLAN mapped to this quarantine VLAN id, in the security device.
What is clInterfaceQuarantineVlanId?
A read-write value specifying the quarantine VLAN ID for an interface; a value of zero means the interface is not quarantined and client traffic bypasses extra security checks, while a non-zero value places clients into that quarantine VLAN for restricted access.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.686.1.1.1.1.3 snmpwalk -v2c -c public <target> CISCO-LWAPP-INTERFACE-MIB::clInterfaceQuarantineVlanId
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.686.1.1.1.1.3.1 snmpget -v2c -c public <target> CISCO-LWAPP-INTERFACE-MIB::clInterfaceQuarantineVlanId.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.686.1.1.1.1.3.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> clInterfaceQuarantineVlanId.1
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-INTERFACE-MIB::clInterfaceQuarantineVlanId OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.686 | ciscoLwappInterfaceMIB | CISCO-LWAPP-INTERFACE-MIB |
| 1.3.6.1.4.1.9.9.686.1 | ciscoLwappInterfaceMIBObjects | CISCO-LWAPP-INTERFACE-MIB |
| 1.3.6.1.4.1.9.9.686.1.1 | ciscoLwappInterfaceConfig | CISCO-LWAPP-INTERFACE-MIB |
| 1.3.6.1.4.1.9.9.686.1.1.1 | clInterfaceConfigTable | CISCO-LWAPP-INTERFACE-MIB |
| 1.3.6.1.4.1.9.9.686.1.1.1.1 | clInterfaceConfigEntry | CISCO-LWAPP-INTERFACE-MIB |
| 1.3.6.1.4.1.9.9.686.1.1.1.1.3 | clInterfaceQuarantineVlanId | CISCO-LWAPP-INTERFACE-MIB |