| OID symbolic | OID numeric | Type | Access | Description |
|---|
| ciscoClientCcxEventLogRequest | 1.3.6.1.4.1.9.9.599.3.3.0.1 | | | |
| ciscoClientCcxEventLogResponse | 1.3.6.1.4.1.9.9.599.3.3.0.2 | | | |
| ciscoClientCcxEventLogStatus | 1.3.6.1.4.1.9.9.599.3.3.0.3 | | | |
| ciscoClientCcxStatsRequest | 1.3.6.1.4.1.9.9.599.3.3.0.4 | | | |
| ciscoClientCcxStatsResponse | 1.3.6.1.4.1.9.9.599.3.3.0.5 | | | |
| ciscoLwappDot11CcxClientMIB | 1.3.6.1.4.1.9.9.599.3.3 | | | This MIB is intended to be implemented on all those
devices operating as Central Controllers (CC) that
terminate the Light Weight Access Point Protocol
(LWAPP) tunnel from Light-weight Access Points.
Link Test is performed to learn the backhaul link
quality between two mesh neighboring mesh nodes.
The arrangement of the controller
(referred to as CC in the diagram) and mesh nodes
(RAP and MAP) LWAPP APs ,client(MN) and NMS appear
as follows.
+.......+ +.......+
+ + + +
+ NMS + + NMS +
+ + + +
+.......+ +.......+
. .
. . . .
. . . .
. . . .
+......+ +......+ +......+ +......+
+ + + + + + + +
+ CC + + CC + + CC + + CC +
+ + + + + + + +
+......+ +......+ +......+ +......+
.. . . .
.. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ RAP + + RAP + + RAP + + RAP + + RAP +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ MAP + + MN + + MAP + + MAP + + MAP +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
. . .. .
. . . .. .
. . . .. .
. . . . .
+......+ +......+ +......+ +......+. +......+
+ + + + + + + + + +
+ MAP + + MAP + + MAP + + MAP + + MN +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
The LWAPP tunnel exists between the controller and
the APs. The MNs communicate with the APs through
the protocol defined by the 802.11 standard. The
controllers and the IDS systems exchange information
through Cisco proprietary event exchange mechanisms.
LWAPP APs, upon bootup, discover and join one of the
controllers and the controller pushes the
configuration, that includes the WLAN parameters, to
the LWAPP APs. The APs then encapsulate all the 802.11
frames from wireless clients inside LWAPP frames and
forward the LWAPP frames to the controller.
GLOSSARY
Access Point ( AP )
An entity that contains an 802.11 medium access
control ( MAC ) and physical layer ( PHY ) interface
and provides access to the distribution services via
the wireless medium for associated clients.
LWAPP APs encapsulate all the 802.11 frames in
LWAPP frames and sends them to the controller to which
it is logically connected.
Central Controller ( CC )
The central entity that terminates the LWAPP protocol
tunnel from the LWAPP APs. Throughout this MIB,
this entity is also referred to as 'controller'.
Mobile Node ( MN )
A roaming 802.11 wireless device in a wireless
network associated with an access point. Mobile Node
and client are used interchangeably.
Network Management System ( NMS )
The station from which the administrator manages the
wired and wireless networks.
Mesh Node
A mesh node is defined as a physical or logical entity
in the mesh network participating in forming the mesh
backhaul. There are two types of mesh nodes supported
in Cisco mesh network:RAP and MAP.
Root AP (RAP)
The AP forming the bridge between a wired and a mesh
network with an Ethernet interface to the wired
network and a 802.11 radio interface to the mesh
network
Mesh AP (MAP).
The AP extending wireless coverage similar to a
repeater in a mesh network and consists of a 802.11
uplink and a 802.11 downlink. On a single-radio
backhaul, both uplink and downlink exist on the same
radio and are logical links only. On a multi-radio
backhaul, they may exist on different radios.MAP APs
associates directly with RAP APs or with another MAP
AP. Each association of AP (MAP-MAP or RAP-MAP) with
another AP forms parent-child relationship.
Mesh Network
Network starting with the wireless backhaul downlink
of the RAP and all the entities below except any
attached network to the Ethernet link of MAPs. A mesh
network below a single RAP is also referred to as a
'Mesh Sector'.A mesh network consists of mesh nodes.
A single mesh network is always augmented to a single
wired network.
Mesh Link
A logical 802.11 link between two mesh nodes. A single
link is point-to-point. All point-to-multipoint links
are considered as multiple mesh links. Often referred
to as mesh backhaul link.
Mesh Backhaul
A Mesh backhaul consists of mesh nodes and mesh links
terminating at a RAP. This necessarily creates a one-
to-one relationship between a 'mesh network', 'mesh
sector' and a 'mesh backhaul' where these terms can be
used interchangeably.
SNR
Signal to Noise ratio on the 802.11 radio.
Bridged network
The bridged network is defined as the network(s)
attached to the Ethernet port of any MAP. There can be
multiple such networks attached to a single mesh
network.
TKIP
TKIP (Temporal Key Integrity Protocol) is an encryption
protocol included as part of the IEEE 802.11i
standard for wireless LANs (WLANs). It was designed to
provide more secure encryption than the notoriously weak
Wired Equivalent Privacy (WEP), the original WLAN security protocol.
RSNA
The Robust Security Network Association (RSNA) authentication
algorithm is defined in Clause 8.4 of the IEEE 802.11i-2004 standard.
If the 802.11 station supports RSNA, it must support the AES-CCMP cipher
algorithm. Support for the WEP and TKIP cipher algorithms are optional
for RSNA.
CCMP
Counter Mode with Cipher Block Chaining Message Authentication Code
Protocol (CCMP) is an encryption protocol that forms part of the 802.11i
standard for wireless local area networks (WLANs), particularly those using
WiMax technology.
OUI
Short for Organizational Unique Identifier, the first 24 bits of a MAC address
for a network-connected device, which indicate the specific vendor for that
device. The IEEE assigns OUIs to vendors. (The last 24 bits of the MAC address
are the device??s unique serial number, assigned to the device by the manufacturer.)
The OUI sometimes is referred to as the Vendor ID.
REFERENCE
[1] Wireless LAN Medium Access Control ( MAC ) and
Physical Layer ( PHY ) Specifications.
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
Weight Access Point Protocol |
| ciscoLwappDot11CCXClientMIBCompliance | 1.3.6.1.4.1.9.9.599.2.3.1.1 | | | The compliance statement for the SNMP entities that
implement this MIB. |
| ciscoLwappDot11CCXClientMIBCompliances | 1.3.6.1.4.1.9.9.599.2.3.1 | | | |
| ciscoLwappDot11CCXClientMIBEventGroup | 1.3.6.1.4.1.9.9.599.2.3.2.1 | | | This collection of objects specifies the required
event groups for the 802.11 wireless
clients. |
| ciscoLwappDot11CCXClientMIBGroups | 1.3.6.1.4.1.9.9.599.2.3.2 | | | |
| ciscoLwappDot11CcxClientMIBObjects | 1.3.6.1.4.1.9.9.599.3.3.0 | | | |
| ciscoLwappDot11CCXClientMIBRoamingGroup | 1.3.6.1.4.1.9.9.599.2.3.2.3 | | | This collection of objects specifies the required
roaming groups for the 802.11 wireless
clients. |
| ciscoLwappDot11CCXClientMIBRsnaGroup | 1.3.6.1.4.1.9.9.599.2.3.2.2 | | | This collection of objects specifies the required
Rsna groups for the 802.11 wireless
clients. |
| ciscoLwappDot11CCXClientMIBStatsGroup | 1.3.6.1.4.1.9.9.599.2.3.2.4 | | | This collection of objects specifies the required
stats groups for the 802.11 wireless
clients. |
| cldccEventLogsRequestEntry | 1.3.6.1.4.1.9.9.599.3.3.0.1.1.1 | | not-accessible | Each entry in this table is represented
by the client mac address. |
| BIT cldccEventLogsRequestLogType | 1.3.6.1.4.1.9.9.599.3.3.0.1.1.1.1 | Bits | read-create | This object specifies the event logs request type which are
required from the client. This can be roaming, RSNA or syslog.
roaming(0) - event log request type is roaming.
rsna(1) - event log request type is RSNA.
syslog(2) - event log request type is syslog. |
| ROW cldccEventLogsRequestRowStatus | 1.3.6.1.4.1.9.9.599.3.3.0.1.1.1.2 | RowStatus | read-create | This is the status column for this row and
is used to create and delete specific instances
of rows in this table. |
| cldccEventLogsRequestTable | 1.3.6.1.4.1.9.9.599.3.3.0.1.1 | | not-accessible | This table represents the list of clients to which the event log
request has been sent for fetching the logs. The table
has a column corresponding to the type of logs to be fetched
for each client.The current logs supported are Roaming,
RSNA and Syslog. |
| cldccEventLogStatusEntry | 1.3.6.1.4.1.9.9.599.3.3.0.3.1.1 | | not-accessible | Each entry in the table is represented
by the client mac address. |
| cldccEventLogStatusTable | 1.3.6.1.4.1.9.9.599.3.3.0.3.1 | | not-accessible | This table represents response status of the various
event log requests sent from the controller. |
| cldccRoamingLogsEntry | 1.3.6.1.4.1.9.9.599.3.3.0.2.2.1 | | not-accessible | Each entry in this table is represented by the
client mac address and roaming logs index. |
| U32 cldccRoamingLogsIndex | 1.3.6.1.4.1.9.9.599.3.3.0.2.2.1.1 | Unsigned32 | read-only | This object indicates the index of roaming logs. |
| CCX cldccRoamingLogsResponseStatus | 1.3.6.1.4.1.9.9.599.3.3.0.3.1.1.1 | CcxEventLogResponseStatus | read-only | This object indicates the status of roaming log request. |
| MAC cldccRoamingLogsSourceSSID | 1.3.6.1.4.1.9.9.599.3.3.0.2.2.1.4 | MacAddress | read-only | This object indicates the BSSID of the associated AP prior to
transition. |
| cldccRoamingLogsTable | 1.3.6.1.4.1.9.9.599.3.3.0.2.2 | | not-accessible | This table represents roaming logs of the clients. |
| MAC cldccRoamingLogsTargetSSID | 1.3.6.1.4.1.9.9.599.3.3.0.2.2.1.3 | MacAddress | read-only | This object indicates the BSSID of the AP to which transition
is attempted. |
| TIM cldccRoamingLogsTimeStamp | 1.3.6.1.4.1.9.9.599.3.3.0.2.2.1.2 | TimeStamp | read-only | This object indicates the time stamp at which
client roaming logs were generated. |
| INT cldccRoamingLogsTransitionReason | 1.3.6.1.4.1.9.9.599.3.3.0.2.2.1.6 | INTEGER | read-only | This object indicates the reason why a transition attempt occurred.
normal-roam-poor-link(1) - represents normal roam poor link.
normal-roam-load-bal(2) - represents normal roam load balance.
insufficient-capacity(3) - represents insufficient capacity of roaming.
inf-directed-roam(4) - represents ccx directed roam.
first-association-to-wlan(5) - represents first association to wlan.
roaming-from-cellular(6) - represents roaming from cellular.
roaming-to-cellular(7) - represents roaming to cellular.
normal-roam-better-ap(8) - represents normal roaming to better ap.
disassociated-or-deauthenticated(9) - represents disassociated or deauthenticated.
failed-8021x-eap-auth(10) - represents failed 8021x eap authentication.
failed-8021x-4way-handshake(11) - represents failed 8021x 4 way handshake.
many-replay-counters(12) - represents too many replay counter errors.
many-data-mic-failures(13) - represents many data mic failures.
many-mgt-mic-failures(14) - represents many management mic failures.
max-retransmissions-exceeded(15) - represents maximum retransmissions exceeded.
excessive-interference(16) - represents excessive interference.
many-broadcast-disassociations(17) - represents many broadcast disassociations.
many-broadcast-deauth(18) - represents many broadcast deauthentication. |
| INT cldccRoamingLogsTransitionResult | 1.3.6.1.4.1.9.9.599.3.3.0.2.2.1.7 | INTEGER | read-only | This object indicates the results of the attempted transition. |
| CIS cldccRoamingLogsTransitionTime | 1.3.6.1.4.1.9.9.599.3.3.0.2.2.1.5 | CiscoMilliSeconds | read-only | This object indicates the difference from last time a frame could have
been transmitted on the source BSS to the time when a
non-802.1x data frame can be attempted on the target BSS. |
| INT cldccRsnaDataAuthType | 1.3.6.1.4.1.9.9.599.3.3.0.2.3.1.5 | INTEGER | read-only | This object indicates the authentication type
used.
ccx-dot1x-leap (0) - the authentication type used is leap.
ccx-dot1x-eap-fast (1) - the authentication type used is eap-fast.
ccx-dot1x-eap-tls (2) - the authentication type used is eap-tls.
ccx-dot1x-eap-ttls (3) - the authentication type used is eap-ttls.
ccx-dot1x-peap-v0 (4) - the authentication type used is peap-v0.
ccx-dot1x-peap-v1 (5) - the authentication type used is peap-v1.
ccx-dot1x-eap-md5 (6) - the authentication type used is eap-md5.
ccx-dot1x-eap-sim (7) - the authentication type used is eap-sim.
ccx-dot1x-psk (8) - the authentication type used is psk.
ccx-dot1x-unknown (255) - the authentication type used is unknown. |
| OCT cldccRsnaDataElemAuthOuis | 1.3.6.1.4.1.9.9.599.3.3.0.2.3.1.9 | OCTET STRING | read-only | This object indicates the authentication ouis
of a RSNA element. |
| U32 cldccRsnaDataElemCapabilities | 1.3.6.1.4.1.9.9.599.3.3.0.2.3.1.10 | Unsigned32 | read-only | This object indicates the
capabilities of the RSNA element . |
| OCT cldccRsnaDataElemMultiCastOuis | 1.3.6.1.4.1.9.9.599.3.3.0.2.3.1.7 | OCTET STRING | read-only | This object indicates the multicast ouis
of a RSNA element. |
| OCT cldccRsnaDataElemUnicastCastOuis | 1.3.6.1.4.1.9.9.599.3.3.0.2.3.1.8 | OCTET STRING | read-only | This object indicates the unicast ouis
of a RSNA element. |
| cldccRsnaDataEntry | 1.3.6.1.4.1.9.9.599.3.3.0.2.3.1 | | not-accessible | Each entry in the table is represented by the
client mac address and RSNA data index. |
| U32 cldccRsnaDataIndex | 1.3.6.1.4.1.9.9.599.3.3.0.2.3.1.1 | Unsigned32 | not-accessible | This object represents the index of the RSNA data. |
| INT cldccRsnaDataResult | 1.3.6.1.4.1.9.9.599.3.3.0.2.3.1.6 | INTEGER | read-only | This object indicates the result of the RSNA Data. |
| cldccRsnaDataTable | 1.3.6.1.4.1.9.9.599.3.3.0.2.3 | | not-accessible | This table represents RSNA data logs of the clients. |
| MAC cldccRsnaDataTargetSSID | 1.3.6.1.4.1.9.9.599.3.3.0.2.3.1.4 | MacAddress | read-only | This object indicates the BSSID of the AP that is targeted for roaming. |
| TIM cldccRsnaDataTimeStamp | 1.3.6.1.4.1.9.9.599.3.3.0.2.3.1.2 | TimeStamp | read-only | This object indicates the time stamp when the
RSNA data were generated. |
| U32 cldccRsnaDataVersion | 1.3.6.1.4.1.9.9.599.3.3.0.2.3.1.3 | Unsigned32 | read-only | This object indicates the RSNA data version. |
| CCX cldccRsnaLogsResponseStatus | 1.3.6.1.4.1.9.9.599.3.3.0.3.1.1.2 | CcxEventLogResponseStatus | read-only | This object indicates the status of RSNA log request. |
| cldccStatsDot11RespEntry | 1.3.6.1.4.1.9.9.599.3.3.0.5.1.1 | | not-accessible | Each entry in this table is represented by
the client Mac address. |
| cldccStatsDot11RespTable | 1.3.6.1.4.1.9.9.599.3.3.0.5.1 | | not-accessible | This table represents the stats response for the
ccx clients. |
| CIS cldccStatsReqDuration | 1.3.6.1.4.1.9.9.599.3.3.0.4.1.1.3 | CiscoMilliSeconds | read-create | This object specifies the duration of the
measurement of stats request. |
| cldccStatsReqEntry | 1.3.6.1.4.1.9.9.599.3.3.0.4.1.1 | | not-accessible | Each entry in this table
is represented by the client mac address. |
| INT cldccStatsReqGroupId | 1.3.6.1.4.1.9.9.599.3.3.0.4.1.1.2 | INTEGER | read-create | This object specifies the stats request group id.
dot11-meas(0) - indicates that the stats request group id
is dot11 measurement.
security-meas(1) - indicates that the stats request group id
is security measurement. |
| ROW cldccStatsReqRowStatus | 1.3.6.1.4.1.9.9.599.3.3.0.4.1.1.4 | RowStatus | read-create | This is the status column for this row
and is used to create and delete specific
instances of rows in this table. |
| INT cldccStatsReqStatus | 1.3.6.1.4.1.9.9.599.3.3.0.4.1.1.1 | INTEGER | read-create | This object specifies stats request status.
incapable(0) - specifies stats request status is incapable.
refused(1) - specifies stats request status is refused.
invalid-state(2) - specifies stats request status is in invalid state.
failure(3) - specifies stats request status is failure.
success(4) - specifies stats request status is success.
inprogress(5) - specifies stats request status is in progress. |
| cldccStatsReqTable | 1.3.6.1.4.1.9.9.599.3.3.0.4.1 | | not-accessible | This table represents the stats request for the
ccx clients. |
| C32 cldccStatsRespAckFailureCount | 1.3.6.1.4.1.9.9.599.3.3.0.5.1.1.9 | Counter32 | read-only | This object indicates the acknowledge failure
count of stats response. |
| C32 cldccStatsRespCcmpDecrypErrors | 1.3.6.1.4.1.9.9.599.3.3.0.5.2.1.5 | Counter32 | read-only | This object indicates the CCMP decrypt error
count of stats response. |
| C32 cldccStatsRespCcmpReplays | 1.3.6.1.4.1.9.9.599.3.3.0.5.2.1.4 | Counter32 | read-only | This object indicates the CCMP replay
count of stats response. |
| C32 cldccStatsRespFailedCount | 1.3.6.1.4.1.9.9.599.3.3.0.5.1.1.3 | Counter32 | read-only | This object indicates the failed count of stats response. |
| C32 cldccStatsRespFcsErrorCount | 1.3.6.1.4.1.9.9.599.3.3.0.5.1.1.12 | Counter32 | read-only | This object indicates the fcs error
count of stats response. |
| C32 cldccStatsRespFrameDuplicateCount | 1.3.6.1.4.1.9.9.599.3.3.0.5.1.1.6 | Counter32 | read-only | This object indicates the duplicate frame
count of stats response. |
| C32 cldccStatsRespMgmtStatsBroadcastActionFrameCount | 1.3.6.1.4.1.9.9.599.3.3.0.5.2.1.16 | Counter32 | read-only | This object indicates the broadcast action frame
count of management stats response`. |
| C32 cldccStatsRespMgmtStatsBroadcastDeauthenticateCount | 1.3.6.1.4.1.9.9.599.3.3.0.5.2.1.15 | Counter32 | read-only | This object indicates the broadcast deauthenticate
count of management stats response. |
| C32 cldccStatsRespMgmtStatsBroadcastDisassociateCount | 1.3.6.1.4.1.9.9.599.3.3.0.5.2.1.14 | Counter32 | read-only | This object indicates the broadcast disassociate
count of management stats response. |
| C32 cldccStatsRespMgmtStatsCcmpDecryptErrors | 1.3.6.1.4.1.9.9.599.3.3.0.5.2.1.10 | Counter32 | read-only | This object indicates the Ccmp decrypt error
count of stats response. |
| C32 cldccStatsRespMgmtStatsCcmpMhdrErrors | 1.3.6.1.4.1.9.9.599.3.3.0.5.2.1.13 | Counter32 | read-only | This object indicates the CCMP mhdr error
count of stats response. |
| C32 cldccStatsRespMgmtStatsCcmpReplays | 1.3.6.1.4.1.9.9.599.3.3.0.5.2.1.9 | Counter32 | read-only | This object indicates the CCMP replay
count of stats response. |
| C32 cldccStatsRespMgmtStatsTkipIcvErrors | 1.3.6.1.4.1.9.9.599.3.3.0.5.2.1.7 | Counter32 | read-only | This object indicates the TKIP ICV error
count of stats response. |
| C32 cldccStatsRespMgmtStatsTkipLocalMicFailures | 1.3.6.1.4.1.9.9.599.3.3.0.5.2.1.8 | Counter32 | read-only | This object indicates the TKIP local MIC failure
count of stats response. |
| C32 cldccStatsRespMgmtStatsTkipMhdrErrors | 1.3.6.1.4.1.9.9.599.3.3.0.5.2.1.12 | Counter32 | read-only | This object indicates the TKIP mhdr error
count of stats response. |
| C32 cldccStatsRespMgmtStatsTkipReplays | 1.3.6.1.4.1.9.9.599.3.3.0.5.2.1.11 | Counter32 | read-only | This object indicates the tkip replay
count of stats management response. |
| C32 cldccStatsRespMulticastReceivedFrameCount | 1.3.6.1.4.1.9.9.599.3.3.0.5.1.1.11 | Counter32 | read-only | This object indicates the multicast received
frame count of stats response. |
| C32 cldccStatsRespMulticastTransmittedFrameCount | 1.3.6.1.4.1.9.9.599.3.3.0.5.1.1.2 | Counter32 | read-only | This object indicates the multicast
transmitted frame count. |
| C32 cldccStatsRespMultipleRetryCount | 1.3.6.1.4.1.9.9.599.3.3.0.5.1.1.5 | Counter32 | read-only | This object indicates the retry
count of stats response. |
| C32 cldccStatsRespReceivedFragmentCount | 1.3.6.1.4.1.9.9.599.3.3.0.5.1.1.10 | Counter32 | read-only | This object indicates the received fragment
count of stats response. |
| C32 cldccStatsRespRetryCount | 1.3.6.1.4.1.9.9.599.3.3.0.5.1.1.4 | Counter32 | read-only | This object indicates the response retry count of stats response. |
| C32 cldccStatsRespRtsFailureCount | 1.3.6.1.4.1.9.9.599.3.3.0.5.1.1.8 | Counter32 | read-only | This object indicates the RTS failure
count of stats response. |
| C32 cldccStatsRespRtsSuccessCount | 1.3.6.1.4.1.9.9.599.3.3.0.5.1.1.7 | Counter32 | read-only | This object indicates the RTS success
count. |
| C32 cldccStatsRespSelectedPairwiseCipher | 1.3.6.1.4.1.9.9.599.3.3.0.5.2.1.1 | Counter32 | read-only | This object indicates the pairwise
cipher of stats response. |
| C32 cldccStatsRespTkipIcvErrors | 1.3.6.1.4.1.9.9.599.3.3.0.5.2.1.2 | Counter32 | read-only | This object indicates the TKIP ICV error
count of stats response. |
| C32 cldccStatsRespTkipLocalMicFailures | 1.3.6.1.4.1.9.9.599.3.3.0.5.2.1.3 | Counter32 | read-only | This object indicates the local TKIP MIC
failure count of stats response. |
| C32 cldccStatsRespTkipReplays | 1.3.6.1.4.1.9.9.599.3.3.0.5.2.1.6 | Counter32 | read-only | This object indicates the TKIP replay
count of stats response. |
| C32 cldccStatsRespTransmittedFragmentCountEx | 1.3.6.1.4.1.9.9.599.3.3.0.5.1.1.1 | Counter32 | read-only | This object indicates the transmitted fragment
count. |
| C32 cldccStatsRespTransmittedFrameCount | 1.3.6.1.4.1.9.9.599.3.3.0.5.1.1.13 | Counter32 | read-only | This object indicates the transmitted frame
count of stats response. |
| cldccStatsSecurityRespEntry | 1.3.6.1.4.1.9.9.599.3.3.0.5.2.1 | | not-accessible | Each entry in this table is represented
by the client Mac address. |
| cldccStatsSecurityRespTable | 1.3.6.1.4.1.9.9.599.3.3.0.5.2 | | not-accessible | This table represents the stats security response for the
ccx clients. |
| OCT cldccSysLogsBuffer | 1.3.6.1.4.1.9.9.599.3.3.0.2.1.1.3 | OCTET STRING | read-only | This object indicates the syslog messages generated on
the client side. |
| cldccSysLogsEntry | 1.3.6.1.4.1.9.9.599.3.3.0.2.1.1 | | not-accessible | Each entry in this table is represented by the
client mac address and syslog index. |
| U32 cldccSysLogsIndex | 1.3.6.1.4.1.9.9.599.3.3.0.2.1.1.1 | Unsigned32 | not-accessible | This object represents the unique index of the
syslog entry exchanged between the client and controller. |
| CCX cldccSysLogsResponseStatus | 1.3.6.1.4.1.9.9.599.3.3.0.3.1.1.3 | CcxEventLogResponseStatus | read-only | This object indicates the status of syslog request. |
| cldccSysLogsTable | 1.3.6.1.4.1.9.9.599.3.3.0.2.1 | | not-accessible | This table represents syslogs of the various
ccxv5 clients. |
| TIM cldccSysLogsTimeStamp | 1.3.6.1.4.1.9.9.599.3.3.0.2.1.1.2 | TimeStamp | read-only | This object indicates the time stamp when the
syslog messages were generated. |
