CISCO-LWAPP-DOT11-CCX-CLIENT-MIB :: cldccRoamingLogsTransitionReason

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-LWAPP-DOT11-CCX-CLIENT-MIBcldccRoamingLogsTransitionReason

cldccRoamingLogsTransitionReason

Module: CISCO-LWAPP-DOT11-CCX-CLIENT-MIB

OID (symbolic): CISCO-LWAPP-DOT11-CCX-CLIENT-MIB::cldccRoamingLogsTransitionReason

OID (numeric): 1.3.6.1.4.1.9.9.599.3.3.0.2.2.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This object indicates the reason why a transition attempt occurred. normal-roam-poor-link(1) - represents normal roam poor link. normal-roam-load-bal(2) - represents normal roam load balance. insufficient-capacity(3) - represents insufficient capacity of roaming. inf-directed-roam(4) - represents ccx directed roam. first-association-to-wlan(5) - represents first association to wlan. roaming-from-cellular(6) - represents roaming from cellular. roaming-to-cellular(7) - represents roaming to cellular. normal-roam-better-ap(8) - represents normal roaming to better ap. disassociated-or-deauthenticated(9) - represents disassociated or deauthenticated. failed-8021x-eap-auth(10) - represents failed 8021x eap authentication. failed-8021x-4way-handshake(11) - represents failed 8021x 4 way handshake. many-replay-counters(12) - represents too many replay counter errors. many-data-mic-failures(13) - represents many data mic failures. many-mgt-mic-failures(14) - represents many management mic failures. max-retransmissions-exceeded(15) - represents maximum retransmissions exceeded. excessive-interference(16) - represents excessive interference. many-broadcast-disassociations(17) - represents many broadcast disassociations. many-broadcast-deauth(18) - represents many broadcast deauthentication.

What is cldccRoamingLogsTransitionReason?

Reports the reason a roaming transition was triggered, such as poor link quality, load balancing, insufficient capacity, or a directed roam from the infrastructure.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.599.3.3.0.2.2.1.6
snmpwalk -v2c -c public <target> CISCO-LWAPP-DOT11-CCX-CLIENT-MIB::cldccRoamingLogsTransitionReason

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.599.3.3.0.2.2.1.6.1
snmpget -v2c -c public <target> CISCO-LWAPP-DOT11-CCX-CLIENT-MIB::cldccRoamingLogsTransitionReason.1

Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-DOT11-CCX-CLIENT-MIB::cldccRoamingLogsTransitionReason OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.599ciscoLwappDot11ClientMIBCISCO-LWAPP-DOT11-CLIENT-MIB
1.3.6.1.4.1.9.9.599.3ciscoLwappDot11ClientCcxMIBObjectsCISCO-LWAPP-DOT11-CLIENT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.9.599.3.3ciscoLwappDot11CcxClientMIBCISCO-LWAPP-DOT11-CCX-CLIENT-MIB
1.3.6.1.4.1.9.9.599.3.3.0ciscoLwappDot11CcxClientMIBObjectsCISCO-LWAPP-DOT11-CCX-CLIENT-MIB
1.3.6.1.4.1.9.9.599.3.3.0.2ciscoClientCcxEventLogResponseCISCO-LWAPP-DOT11-CCX-CLIENT-MIB
1.3.6.1.4.1.9.9.599.3.3.0.2.2cldccRoamingLogsTableCISCO-LWAPP-DOT11-CCX-CLIENT-MIB
1.3.6.1.4.1.9.9.599.3.3.0.2.2.1cldccRoamingLogsEntryCISCO-LWAPP-DOT11-CCX-CLIENT-MIB
1.3.6.1.4.1.9.9.599.3.3.0.2.2.1.6cldccRoamingLogsTransitionReasonCISCO-LWAPP-DOT11-CCX-CLIENT-MIB