CISCO-LWAPP-DOT11-CCX-CLIENT-MIB :: cldccRsnaDataAuthType

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-LWAPP-DOT11-CCX-CLIENT-MIBcldccRsnaDataAuthType

cldccRsnaDataAuthType

Module: CISCO-LWAPP-DOT11-CCX-CLIENT-MIB

OID (symbolic): CISCO-LWAPP-DOT11-CCX-CLIENT-MIB::cldccRsnaDataAuthType

OID (numeric): 1.3.6.1.4.1.9.9.599.3.3.0.2.3.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This object indicates the authentication type used. ccx-dot1x-leap (0) - the authentication type used is leap. ccx-dot1x-eap-fast (1) - the authentication type used is eap-fast. ccx-dot1x-eap-tls (2) - the authentication type used is eap-tls. ccx-dot1x-eap-ttls (3) - the authentication type used is eap-ttls. ccx-dot1x-peap-v0 (4) - the authentication type used is peap-v0. ccx-dot1x-peap-v1 (5) - the authentication type used is peap-v1. ccx-dot1x-eap-md5 (6) - the authentication type used is eap-md5. ccx-dot1x-eap-sim (7) - the authentication type used is eap-sim. ccx-dot1x-psk (8) - the authentication type used is psk. ccx-dot1x-unknown (255) - the authentication type used is unknown.

What is cldccRsnaDataAuthType?

Reports the authentication method (e.g. LEAP, EAP-FAST, EAP-TLS) used by a wireless client's RSNA (Robust Security Network Association) data, as read-only status.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.599.3.3.0.2.3.1.5
snmpwalk -v2c -c public <target> CISCO-LWAPP-DOT11-CCX-CLIENT-MIB::cldccRsnaDataAuthType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.599.3.3.0.2.3.1.5.1
snmpget -v2c -c public <target> CISCO-LWAPP-DOT11-CCX-CLIENT-MIB::cldccRsnaDataAuthType.1

Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-DOT11-CCX-CLIENT-MIB::cldccRsnaDataAuthType OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.599ciscoLwappDot11ClientMIBCISCO-LWAPP-DOT11-CLIENT-MIB
1.3.6.1.4.1.9.9.599.3ciscoLwappDot11ClientCcxMIBObjectsCISCO-LWAPP-DOT11-CLIENT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.9.599.3.3ciscoLwappDot11CcxClientMIBCISCO-LWAPP-DOT11-CCX-CLIENT-MIB
1.3.6.1.4.1.9.9.599.3.3.0ciscoLwappDot11CcxClientMIBObjectsCISCO-LWAPP-DOT11-CCX-CLIENT-MIB
1.3.6.1.4.1.9.9.599.3.3.0.2ciscoClientCcxEventLogResponseCISCO-LWAPP-DOT11-CCX-CLIENT-MIB
1.3.6.1.4.1.9.9.599.3.3.0.2.3cldccRsnaDataTableCISCO-LWAPP-DOT11-CCX-CLIENT-MIB
1.3.6.1.4.1.9.9.599.3.3.0.2.3.1cldccRsnaDataEntryCISCO-LWAPP-DOT11-CCX-CLIENT-MIB
1.3.6.1.4.1.9.9.599.3.3.0.2.3.1.5cldccRsnaDataAuthTypeCISCO-LWAPP-DOT11-CCX-CLIENT-MIB