SL-OPT-MIB

All MIBs › SL-OPT-MIB

Organization: SmartOptics AS

Last Updated: 2002-01-14

Description: MIB for optical transponding connections on SmartOptics SiteLight equipment, managing 2.5 Gbps and 10 Gbps transponder cross-connect configuration and optical-layer traps

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SL-OPT-MIB?

SL-OPT-MIB is a Smartoptics SiteLight MIB for optical transponding connections, covering cross-connect configuration for 2.5 Gbps (SONET/OC-48-class) and 10 Gbps transponder services on the platform. It exposes cross-connect tables mapping ingress to egress interfaces, rate-control admin/operational status, loss-of-signal (LOS) propagation behavior, and the configured SONET rate for each connection, plus row-status control for provisioning and a set of optical-layer traps. Its monitoring role centers on optical service configuration and fault status: an operator checks the cross-connect mapping and rate settings to confirm a transponder circuit is provisioned as designed, and monitors LOS propagation and associated traps to catch an optical signal failure being correctly forwarded (or not) to the far end. It builds on standard SONET signal-rate concepts and works alongside the platform's SONET alarm MIB, which supplies the detailed alarm types referenced by this module's traps. It is deployed in Smartoptics SiteLight DWDM/optical transport networks provisioning point-to-point transponder services at 2.5G and 10G rates. Engineers can download the SL-OPT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SL-OPT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Smartoptics SiteLight optical transport/DWDM equipment (transponder)

Monitoring Examples

An administrator would poll optXpdConnConfigTable/optXpdConnConfigEntry to verify optXpdConnConfigIngressIf and optXpdConnConfigEgressIf are cross-connected as designed, and check optXpdConnConfigRateControlAdmin against optXpdConnConfigRateControlOper to confirm the rate-control feature is operating as configured. optXpdConnConfigLosPropagation combined with slOptTraps shows whether a loss-of-signal condition on one side of the transponder is being correctly propagated to alert the far-end network, and optXpd10ConnConfigTable provides the equivalent cross-connect view for 10 Gbps circuits.

What Can Be Monitored

transponder cross-connect ingress/egress mapping
rate-control admin/operational status
loss-of-signal (LOS) propagation setting
configured SONET rate
cross-connect row/provisioning status

Imported Objects

From IF-MIB

InterfaceIndex

From PerfHist-TC-MIB

PerfCurrentCount
PerfIntervalCount
PerfTotalCount

From SL-NE-MIB

sitelight

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus
TimeStamp
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
slOpt	1.3.6.1.4.1.4515.1.11			This MIB module describes the optical connections.
slOptConn	1.3.6.1.4.1.4515.1.11.1
optXpdConnConfigTable	1.3.6.1.4.1.4515.1.11.1.1		not-accessible	The dynamic Transponding table. The table contains for each transponding connection two entries, one for each direction. The index to the table is the ifIndex of both interfaces because in the case of one of the APS configuration we define a one-to-many connection. The ifType valued used for the index is: 196.
optXpdConnConfigEntry	1.3.6.1.4.1.4515.1.11.1.1.1		not-accessible	An entry in the Transponding table.
NUM optXpdConnConfigIngressIf	1.3.6.1.4.1.4515.1.11.1.1.1.1	InterfaceIndex	read-create	The ingress transponding interface.
NUM optXpdConnConfigEgressIf	1.3.6.1.4.1.4515.1.11.1.1.1.2	InterfaceIndex	read-create	The egress transponding interface.
INT optXpdConnConfigRateControlAdmin	1.3.6.1.4.1.4515.1.11.1.1.1.3	INTEGER	read-create	This variable ask the rate of the traffic used by this interface. The value should be specified in Kbps units. The value of the optXpdConnConfigRateControlAdmin variable should contain two information elements: 1. The retimer bit-rate. 2. The source of the rate (enum or explicit). The second information element shall be taken from the right-most bit of the object value. While the bit-rate will be represented by the rest of the bits. For example if the user configured an explicit bit rate R, the value of the object will be 2xR. If the user configured the same value by ENUM selection, the object value shall be 2xR + 1. This means that the MCC should send the service card the object value shifted >> 1 (devide by 2). The value 0 is used for rate control Bypass.
INT optXpdConnConfigRateControlOper	1.3.6.1.4.1.4515.1.11.1.1.1.4	INTEGER	read-only	This variable tells the rate of the traffic used by this interface. The value should be specified in Kbps. The value is translate by the agent to the rate supported by the hardware device units. The value 0 is returned for rate control Bypass.
ROW optXpdConnConfigRowStatus	1.3.6.1.4.1.4515.1.11.1.1.1.5	RowStatus	read-create	This object is used to create and delete rows in the table.
T/F optXpdConnConfigLosPropagation	1.3.6.1.4.1.4515.1.11.1.1.1.6	TruthValue	read-create	This object is used to detrmine if the LOS propagation should be active.
T/F optXpdConnSonetRate	1.3.6.1.4.1.4515.1.11.1.1.1.7	TruthValue	read-create	In the case of implicit SONET rate, this variable should be TRUE. If the case of explicit SONET rate, the user may select TRUE or FALSE. In this case the default value is FALSE.
optXpd10ConnConfigTable	1.3.6.1.4.1.4515.1.11.1.2		not-accessible	The static 10Gb Transponding table. The table contains for each transponding connection two entries, one for each direction. The index to the table is the ifIndex the upper interface (port# 1). The ifType valued used for the index is: 196.
optXpd10ConnConfigEntry	1.3.6.1.4.1.4515.1.11.1.2.1		not-accessible	An entry in the 10Gb Transponding table.
NUM optXpd10ConnConfigIngressIf	1.3.6.1.4.1.4515.1.11.1.2.1.1	InterfaceIndex	read-create	The ingress transponding interface.
NUM optXpd10ConnConfigEgressIf	1.3.6.1.4.1.4515.1.11.1.2.1.2	InterfaceIndex	read-create	The egress transponding interface.
INT optXpd10ConnConfigRateControlOper	1.3.6.1.4.1.4515.1.11.1.2.1.3	INTEGER	read-only	This variable tells the rate of the traffic used by this interface. The value should be specified in Kbps. The value is translate by the agent to the rate supported by the hardware device units.
T/F optXpd10ConnConfigLosPropagation	1.3.6.1.4.1.4515.1.11.1.2.1.4	TruthValue	read-create	This object is used to detrmine if the LOS propagation should be active.
slOptLastChange	1.3.6.1.4.1.4515.1.11.6
TIM optXpdConnConfigLastChange	1.3.6.1.4.1.4515.1.11.6.1	TimeStamp	read-only	The value of MIB II's sysUpTime object at the time the optXpdConnConfigTable was last changed.
slOptTraps	1.3.6.1.4.1.4515.1.11.7
NTF optXpdConnConfigTableChange	1.3.6.1.4.1.4515.1.11.7.1			A optXpdConnConfigTableChange trap is sent when the content of the xpdConnConfigTable is changed.

RFC description

Manages optical connections and transponder modules in SmartOptics SiteLight systems.

Start monitoring Smartoptics SiteLight optical transport/DWDM equipment, transponder (cross-connect/LOS-propagation status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SL-OPT-MIB

What Is SL-OPT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description