CIENA-WS-NOTIFICATION-MIB

All MIBs › CIENA-WS-NOTIFICATION-MIB

Organization: Ciena Corporation

Last Updated: 2016-11-14

Category: Alarm and Event Management, Optical and WDM, Vendor: Ciena

Description: Defines SNMP notifications and traps for Ciena WaveServer optical transport platform events.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CIENA-WS-NOTIFICATION-MIB?

CIENA-WS-NOTIFICATION-MIB defines the SNMP trap/notification set for Ciena's WaveServer optical transport platform, delivering the same alarm and link-state fault data modeled in CIENA-WS-ALARM-MIB as asynchronous notifications. It covers alarm notifications carrying severity, description, entity type, and active status, plus dedicated link-state defect notifications. This is a fault-monitoring module rather than a polled-counter one: it lets an NMS receive real-time alerts about hardware or optical-signal faults (e.g., a line port defect) instead of waiting for a poll cycle, which matters for optical transport where fast fault detection affects service restoration times. It is closely tied to CIENA-WS-ALARM-MIB (shares the same alarm attributes) and to CIENA-WS-PTP-MIB (physical termination point states referenced by the link-state notifications). It is deployed in carrier and enterprise DWDM/coherent optical transport networks using Ciena WaveServer chassis. Engineers can download the CIENA-WS-NOTIFICATION-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CIENA-WS-NOTIFICATION-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ciena WaveServer optical transport platforms

Monitoring Examples

A trap receiver would capture a wsAlarmNotification carrying wsAlarmNotificationSeverity, wsAlarmNotificationDescription, and wsAlarmNotificationActiveStatus for a given wsAlarmNotificationInstanceId, or a wsLinkStateAlarmNotification tied to wsLinkStateAlarmNotificationSiteId. Receiving a high-severity alarm notification with active status "true" for a specific site/group/member would indicate an in-progress fault—for example a loss-of-signal condition on an optical line port—needing immediate operator response.

What Can Be Monitored

alarm notifications (severity, description, active status)
link-state defect notifications
alarm site/group/member identifiers
entity type of the alarming component

Imported Objects

From CIENA-WS-MIB

cienaWsNotifications

OBJECT-IDENTITY

From SNMPv2-SMI

MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
cienaWsNotificationMIB	1.3.6.1.4.1.1271.3.2.3			Notification definitions for Waveserver. Contains alarm notifications and link state defects.
NTF wsAlarmNotification	1.3.6.1.4.1.1271.3.2.11			Ciena Wavesever notification for an alarm raising or clearing
T/F wsAlarmNotificationActiveStatus	1.3.6.1.4.1.1271.3.2.11.10	TruthValue	read-only	The alarm active status.
STR wsAlarmNotificationDateAndTime	1.3.6.1.4.1.1271.3.2.11.5	DisplayString32	read-only	The local date and time when alarm was raised.
STR wsAlarmNotificationDescription	1.3.6.1.4.1.1271.3.2.11.9	DisplayString32	read-only	The alarm description.
INT wsAlarmNotificationEntityType	1.3.6.1.4.1.1271.3.2.11.11	INTEGER	read-only	The alarm source entity type if applicable.
U32 wsAlarmNotificationGroupId	1.3.6.1.4.1.1271.3.2.11.2	Unsigned32	read-only	The system Group ID.
STR wsAlarmNotificationInstance	1.3.6.1.4.1.1271.3.2.11.8	DisplayString32	read-only	The object instance the alarm is raised against.
U32 wsAlarmNotificationInstanceId	1.3.6.1.4.1.1271.3.2.11.4	Unsigned32	read-only	The alarm Instance ID.
U32 wsAlarmNotificationMemberId	1.3.6.1.4.1.1271.3.2.11.3	Unsigned32	read-only	The system Member ID.
INT wsAlarmNotificationSeverity	1.3.6.1.4.1.1271.3.2.11.7	INTEGER	read-only	The alarm severity.
U32 wsAlarmNotificationSiteId	1.3.6.1.4.1.1271.3.2.11.1	Unsigned32	read-only	The system Site ID.
U32 wsAlarmNotificationTableId	1.3.6.1.4.1.1271.3.2.11.6	Unsigned32	read-only	The alarm table ID.
NTF wsLinkStateAlarmNotification	1.3.6.1.4.1.1271.3.2.12			Ciena Waveserver notification for line faults.
STR wsLinkStateAlarmNotificationDateAndTime	1.3.6.1.4.1.1271.3.2.12.5	DisplayString32	read-only	The local date and time when alarm was raised.
STR wsLinkStateAlarmNotificationDescription	1.3.6.1.4.1.1271.3.2.12.9	DisplayString32	read-only	The alarm description.
INT wsLinkStateAlarmNotificationEntityType	1.3.6.1.4.1.1271.3.2.12.14	INTEGER	read-only	The alarm source entity type if applicable.
wsLinkStateAlarmNotificationEthDefects	1.3.6.1.4.1.1271.3.2.12.11			Ethernet defects.
INT wsLinkStateAlarmNotificationEthFecLossSync	1.3.6.1.4.1.1271.3.2.12.11.7	INTEGER	read-only	Ethernet FEC loss of alignment marker.
INT wsLinkStateAlarmNotificationEthPcsHighBer	1.3.6.1.4.1.1271.3.2.12.11.1	INTEGER	read-only	Ethernet PCS high bit error rate.
INT wsLinkStateAlarmNotificationEthPcsLoam	1.3.6.1.4.1.1271.3.2.12.11.2	INTEGER	read-only	Ethernet PCS loss of alignment marker.
INT wsLinkStateAlarmNotificationEthPcsLobl	1.3.6.1.4.1.1271.3.2.12.11.3	INTEGER	read-only	Ethernet PCS loss of block lock.
INT wsLinkStateAlarmNotificationEthPmaSool	1.3.6.1.4.1.1271.3.2.12.11.8	INTEGER	read-only	Ethernet PMA serdes out of lock.
INT wsLinkStateAlarmNotificationEthRsLf	1.3.6.1.4.1.1271.3.2.12.11.5	INTEGER	read-only	Ethernet RS local fault.
INT wsLinkStateAlarmNotificationEthRsLinkDown	1.3.6.1.4.1.1271.3.2.12.11.4	INTEGER	read-only	Ethernet RS link down.
INT wsLinkStateAlarmNotificationEthRsRf	1.3.6.1.4.1.1271.3.2.12.11.6	INTEGER	read-only	Ethernet RS remote fault.
U32 wsLinkStateAlarmNotificationGroupId	1.3.6.1.4.1.1271.3.2.12.2	Unsigned32	read-only	The system Group ID.
STR wsLinkStateAlarmNotificationInstance	1.3.6.1.4.1.1271.3.2.12.8	DisplayString32	read-only	The object instance the alarm is raised against.
U32 wsLinkStateAlarmNotificationInstanceId	1.3.6.1.4.1.1271.3.2.12.4	Unsigned32	read-only	The line fault instance ID.
U32 wsLinkStateAlarmNotificationMemberId	1.3.6.1.4.1.1271.3.2.12.3	Unsigned32	read-only	The system Member ID.
INT wsLinkStateAlarmNotificationOduAis	1.3.6.1.4.1.1271.3.2.12.13.2	INTEGER	read-only	ODU alarm indicating signal.
INT wsLinkStateAlarmNotificationOduBdi	1.3.6.1.4.1.1271.3.2.12.13.7	INTEGER	read-only	ODU backwards defect indicator.
wsLinkStateAlarmNotificationOduDefects	1.3.6.1.4.1.1271.3.2.12.13			ODU layer defects.
INT wsLinkStateAlarmNotificationOduFeClientSf	1.3.6.1.4.1.1271.3.2.12.13.9	INTEGER	read-only	ODU far-end client signal fail.
INT wsLinkStateAlarmNotificationOduLck	1.3.6.1.4.1.1271.3.2.12.13.3	INTEGER	read-only	ODU locked.
INT wsLinkStateAlarmNotificationOduOci	1.3.6.1.4.1.1271.3.2.12.13.1	INTEGER	read-only	ODU open connection indication.
INT wsLinkStateAlarmNotificationOduPtiMismatch	1.3.6.1.4.1.1271.3.2.12.13.8	INTEGER	read-only	ODU payload type indicator mismatch.
INT wsLinkStateAlarmNotificationOduSd	1.3.6.1.4.1.1271.3.2.12.13.5	INTEGER	read-only	ODU signal degrade.
INT wsLinkStateAlarmNotificationOduSf	1.3.6.1.4.1.1271.3.2.12.13.4	INTEGER	read-only	ODU signal fail.
INT wsLinkStateAlarmNotificationOduSkewOor	1.3.6.1.4.1.1271.3.2.12.13.10	INTEGER	read-only	ODU skew out of range.
INT wsLinkStateAlarmNotificationOduTtiMismatch	1.3.6.1.4.1.1271.3.2.12.13.6	INTEGER	read-only	ODU TTI mismatch.
INT wsLinkStateAlarmNotificationOtuBdi	1.3.6.1.4.1.1271.3.2.12.12.7	INTEGER	read-only	OTU backwards defect indicator.
wsLinkStateAlarmNotificationOtuDefects	1.3.6.1.4.1.1271.3.2.12.12			OTU layer defects.
INT wsLinkStateAlarmNotificationOtuFreqOor	1.3.6.1.4.1.1271.3.2.12.12.2	INTEGER	read-only	OTU frequency out of range.
INT wsLinkStateAlarmNotificationOtuLoc	1.3.6.1.4.1.1271.3.2.12.12.1	INTEGER	read-only	OTU loss of clock.
INT wsLinkStateAlarmNotificationOtuLof	1.3.6.1.4.1.1271.3.2.12.12.3	INTEGER	read-only	OTU loss of frame.
INT wsLinkStateAlarmNotificationOtuLom	1.3.6.1.4.1.1271.3.2.12.12.6	INTEGER	read-only	OTU loss of multi-frame.
INT wsLinkStateAlarmNotificationOtuPreFecSd	1.3.6.1.4.1.1271.3.2.12.12.5	INTEGER	read-only	OTU pre-FEC signal degrade.
INT wsLinkStateAlarmNotificationOtuPreFecSf	1.3.6.1.4.1.1271.3.2.12.12.4	INTEGER	read-only	OTU pre-FEC signal fail.
INT wsLinkStateAlarmNotificationOtuTtiMismatch	1.3.6.1.4.1.1271.3.2.12.12.8	INTEGER	read-only	OTU TTI mismatch.
wsLinkStateAlarmNotificationPtpDefects	1.3.6.1.4.1.1271.3.2.12.10			Defects related to the physical termination point.
INT wsLinkStateAlarmNotificationPtpRxLol	1.3.6.1.4.1.1271.3.2.12.10.2	INTEGER	read-only	PTP alarms for the link.
INT wsLinkStateAlarmNotificationPtpRxLos	1.3.6.1.4.1.1271.3.2.12.10.1	INTEGER	read-only	PTP alarms for the link.
INT wsLinkStateAlarmNotificationPtpTxLol	1.3.6.1.4.1.1271.3.2.12.10.4	INTEGER	read-only	PTP alarms for the link.
INT wsLinkStateAlarmNotificationPtpTxLos	1.3.6.1.4.1.1271.3.2.12.10.3	INTEGER	read-only	PTP alarms for the link.
INT wsLinkStateAlarmNotificationSeverity	1.3.6.1.4.1.1271.3.2.12.7	INTEGER	read-only	The alarm severity.
U32 wsLinkStateAlarmNotificationSiteId	1.3.6.1.4.1.1271.3.2.12.1	Unsigned32	read-only	The line fault site ID.

RFC description

Defines alarm and link state defect notifications for Ciena Waveserver systems including severity and status tracking.

Start monitoring Ciena WaveServer optical transport platform with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CIENA-WS-NOTIFICATION-MIB

What Is CIENA-WS-NOTIFICATION-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description