All MIBs › CIENA-CES-PORT-XCVR-MIB
Organization: Ciena Corp.
Last Updated: 2019-01-03
Category: Network Interfaces, Vendor: Ciena
Description: Monitors optical transceiver (SFP/XFP) parameters and DOM data on Ciena CES switch ports.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CIENA-CES-PORT-XCVR-MIB?
CIENA-CES-PORT-XCVR-MIB is a Ciena CES (Carrier Ethernet Switching) platform MIB focused on pluggable optical transceivers (SFP/XFP) installed in switch ports, defining the notifications associated with transceiver events and Digital Optical Monitoring (DOM) conditions. It belongs to the optical/physical-layer monitoring category, complementing generic interface MIBs with physical-optics detail. As a hardware health-monitoring module it is used to alert operators in near-real time when a transceiver is inserted or removed, or when an optical parameter (such as transmit/receive power or bias current) crosses a configured threshold — leading indicators of fiber link or optics degradation before a link actually fails. It complements standard interface MIBs (IF-MIB) which lack this physical-layer optics detail, and is typically cross-referenced with entity/physical inventory MIBs for slot/port identification. It is deployed in carrier Ethernet access/aggregation networks using Ciena CES switches with pluggable optical interfaces where proactive optics-degradation monitoring is important. Network engineers evaluating or troubleshooting this functionality can download the CIENA-CES-PORT-XCVR-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in CIENA-CES-PORT-XCVR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Ciena CES (Carrier Ethernet Switching) switch port optics (SFP/XFP)
Monitoring Examples
Based on the module description, this MIB's primary content is transceiver-related notifications rather than a full polling table of DOM scalars; an administrator would configure the SNMP manager to receive traps for transceiver insertion, removal, and optical threshold crossings, rather than periodically polling for status. No specific DOM object names were available in this excerpt to cite directly, but such notifications would typically flag a degrading laser or a newly inserted/removed SFP/XFP module on a CES switch port.
What Can Be Monitored
- transceiver insertion notification
- transceiver removal notification
- optical threshold-crossing (DOM) alert
This MIB depends on
Related MIBs
Imported Objects
From CIENA-GLOBAL-MIB
| cienaGlobalMacAddress | OBJECT-TYPE |
| cienaGlobalSeverity | OBJECT-TYPE |
From CIENA-SMI
| cienaCesConfig | OBJECT-IDENTITY |
| cienaCesNotifications | OBJECT-IDENTITY |
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| cienaCesPortXcvrMIB | 1.3.6.1.4.1.1271.2.1.9 | This module defines the port XCVR related notifications. | ||
| cienaCesPortXcvrMIBObjects | 1.3.6.1.4.1.1271.2.1.9.1 | |||
| cienaCesPortXcvr | 1.3.6.1.4.1.1271.2.1.9.1.1 | |||
| cienaCesPortXcvrTable | 1.3.6.1.4.1.1271.2.1.9.1.1.1 | not-accessible | This table contains descriptions and settings for each of the physical transceiver devices. | |
| cienaCesPortXcvrEntry | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1 | not-accessible | The transceiver device entry. | |
| INT cienaCesPortXcvrId | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.1 | INTEGER | not-accessible | The ID for the transceiver. |
| INT cienaCesPortXcvrOperState | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.2 | INTEGER | read-only | The operational state of the transceiver. |
| INT cienaCesPortXcvrTemperature | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.3 | INTEGER | read-only | The temperature of the transceiver. Units are celsius. |
| INT cienaCesPortXcvrVcc | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.4 | INTEGER | read-only | The voltage of the transceiver. Units are milli volts |
| INT cienaCesPortXcvrBias | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.5 | INTEGER | read-only | The bias of the transceiver. Units are milli amps |
| INT cienaCesPortXcvrRxPower | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.6 | INTEGER | read-only | The measured receive power of the transceiver. Units are micro watts. |
| I32 cienaCesPortXcvrHighTempAlarmThreshold | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.7 | Integer32 | read-only | Indicates the higher threshold for the temperature alarm. Units are celsius. |
| I32 cienaCesPortXcvrLowTempAlarmThreshold | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.8 | Integer32 | read-only | Indicates the lower threshold for the temperature alarm. Units are celsius. |
| I32 cienaCesPortXcvrHighVccAlarmThreshold | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.9 | Integer32 | read-only | Indicates the higher threshold for the voltage alarm. Units are milli volts |
| I32 cienaCesPortXcvrLowVccAlarmThreshold | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.10 | Integer32 | read-only | Indicates the lower threshold for the voltage alarm. Units are milli volts |
| I32 cienaCesPortXcvrHighBiasAlarmThreshold | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.11 | Integer32 | read-only | Indicates the higher threshold for the bias alarm. Units are milli amps |
| I32 cienaCesPortXcvrLowBiasAlarmThreshold | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.12 | Integer32 | read-only | Indicates the lower threshold for the bias alarm. Units are milli amps |
| I32 cienaCesPortXcvrHighTxPwAlarmThreshold | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.13 | Integer32 | read-only | Indicates the higher threshold for the Tx power alarm. Units are micro watts |
| I32 cienaCesPortXcvrLowTxPwAlarmThreshold | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.14 | Integer32 | read-only | Indicates the lower threshold for the Tx power alarm. Units are micro watts. |
| I32 cienaCesPortXcvrHighRxPwAlarmThreshold | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.15 | Integer32 | read-only | Indicates the higher threshold for the Rx power alarm. Units are micro watts. |
| I32 cienaCesPortXcvrLowRxPwAlarmThreshold | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.16 | Integer32 | read-only | Indicates the lower threshold for the Rx power alarm. Units are micro watts. |
| U32 cienaCesPortXcvrNotifChassisIndex | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.17 | Unsigned32 | accessible-for-notify | Indicates the chassis index for the port used for trap definition. |
| U32 cienaCesPortXcvrNotifShelfIndex | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.18 | Unsigned32 | accessible-for-notify | Indicates the shelf index for the port used for trap definition. |
| U32 cienaCesPortXcvrNotifSlotIndex | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.19 | Unsigned32 | accessible-for-notify | Indicates the slot index for the port used for trap definition. |
| U32 cienaCesPortXcvrNotifPortNumber | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.20 | Unsigned32 | accessible-for-notify | Indicates the port number for the corresponding PGID used for trap definition. |
| INT cienaCesPortXcvrIdentiferType | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.21 | INTEGER | read-only | Type for the transceiver. |
| INT cienaCesPortXcvrExtIdentiferType | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.22 | INTEGER | read-only | Extended identifier type represents for this transceiver. |
| INT cienaCesPortXcvrConnectorType | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.23 | INTEGER | read-only | Type of connector: unknown(1) sc(2) fiberChannelStyle1(3) fiberChannelStyle2(4) bnc/tnc(5) coaxialHeader(6) fiberJack(7) lc(8) mt-rj(9) mu(10) sg(11) opticalPitTail(12) reserved(13..32) hssdc(33) copperPitTail(34) reserved(35..128) vendorSpecific(129..256) |
| INT cienaCesPortXcvrType | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.24 | INTEGER | read-only | Type of transceiver. |
| STR cienaCesPortXcvrVendorName | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.25 | DisplayString | read-only | String containing this transceiver's vendor name. |
| OCT cienaCesPortXcvrVendorOUI | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.26 | OCTET STRING | read-only | String containing this transceiver's vendor OUI. |
| STR cienaCesPortXcvrVendorPartNum | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.27 | DisplayString | read-only | String containing this transceiver's vendor part number. |
| STR cienaCesPortXcvrRevNum | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.28 | DisplayString | read-only | String containing this tranceiver's part revision number. |
| STR cienaCesPortXcvrSerialNum | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.29 | DisplayString | read-only | String containing this tranceiver's part serial number. |
| STR cienaCesPortXcvrMfgDate | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.30 | DisplayString | read-only | String containing this transceiver's manufactured date. |
| INT cienaCesPortXcvrWaveLength | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.31 | INTEGER | read-only | The wavelength of the transceiver. Units are nano meter. |
| INT cienaCesPortXcvrTxState | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.32 | INTEGER | read-only | Indicates whether this transceiver is currently set to transmit. |
| INT cienaCesPortXcvrTxFaultStatus | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.33 | INTEGER | read-only | Indicates the fault status of this transceiver. |
| INT cienaCesPortXcvrAdminState | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.34 | INTEGER | read-only | The administrative state of the transceiver. |
| INT cienaCesPortXcvrTxOutputPower | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.35 | INTEGER | read-only | The measured transmitted output power of the transceiver. Units are micro watts. |
| INT cienaCesPortXcvrFecMode | 1.3.6.1.4.1.1271.2.1.9.1.1.1.1.36 | INTEGER | read-only | This represents the transceiver's FEC Mode. gfec means generic forward error correction, efec means enhanced forward error correction. |
| cienaCesPortXcvrNotif | 1.3.6.1.4.1.1271.2.1.9.1.2 | |||
| INT cienaCesPortXcvrEventType | 1.3.6.1.4.1.1271.2.1.9.1.2.1 | INTEGER | read-only | Indicates if the transceiver specified by the ciena54XXPortXcvrId has come up, gone down or has been selected. |
| INT cienaCesPortXcvrErrorType | 1.3.6.1.4.1.1271.2.1.9.1.2.2 | INTEGER | accessible-for-notify | Indicates if the transceiver specified by the cienaCesPortXcvrId is faulted because of checksum failure or optical fault. This object only makes sense if the transceiver has been detected faulted; otherwise it returns 'none'. |
| cienaCesPortXcvrMIBConformance | 1.3.6.1.4.1.1271.2.1.9.3 | |||
| cienaCesPortXcvrMIBCompliances | 1.3.6.1.4.1.1271.2.1.9.3.1 | |||
| cienaCesPortXcvrMIBGroups | 1.3.6.1.4.1.1271.2.1.9.3.2 | |||
| cienaCesPortXcvrMIBNotificationPrefix | 1.3.6.1.4.1.1271.2.2.9 | |||
| cienaCesPortXcvrMIBNotifications | 1.3.6.1.4.1.1271.2.2.9.0 | |||
| NTF cienaCesPortXcvrRemovedNotification | 1.3.6.1.4.1.1271.2.2.9.0.1 | A cienaCesPortXcvrRemovedNotification is sent if the transceiver has been removed. To enable the device to send this notification: cienaCesPortXcvrLinkStateChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber. | ||
| NTF cienaCesPortXcvrInsertedNotification | 1.3.6.1.4.1.1271.2.2.9.0.2 | A cienaCesPortXcvrInsertedNotification is sent if the transceiver has been inserted. To enable the device to send this notification: cienaCesPortXcvrLinkStateChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber. | ||
| NTF cienaCesPortXcvrErrorTypeNotification | 1.3.6.1.4.1.1271.2.2.9.0.5 | A cienaCesPortXcvrErrorTypeNotification is sent if the transceiver is detected to be faulted. The reason for the failure is specified by cienaCesPortXcvrErrorType. To enable the device to send this notification: cienaCesPortXcvrErrorTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, cienaCesPortXcvrNotifPortNumber, and cienaCesPortXcvrErrorType. | ||
| NTF cienaCesPortXcvrTempHighNotification | 1.3.6.1.4.1.1271.2.2.9.0.6 | A cienaCesPortXcvrTempHighNotification is sent if the transceiver temperature exceeds the threshold. To enable the device to send this notification: cienaCesPortXcvrTempChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber. | ||
| NTF cienaCesPortXcvrTempLowNotification | 1.3.6.1.4.1.1271.2.2.9.0.7 | A cienaCesPortXcvrTempLowNotification is sent if the transceiver temperature falls below the threshold. To enable the device to send this notification: cienaCesPortXcvrTempChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber. | ||
| NTF cienaCesPortXcvrTempNormalNotification | 1.3.6.1.4.1.1271.2.2.9.0.8 | A cienaCesPortXcvrTempNormalNotification is sent when the transceiver temperature returns to normal state. To enable the device to send this notification: cienaCesPortXcvrTempChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber. | ||
| NTF cienaCesPortXcvrVoltageHighNotification | 1.3.6.1.4.1.1271.2.2.9.0.9 | A cienaCesPortXcvrVoltageHighNotification is sent if the transceiver voltage exceeds the threshold. To enable the device to send this notification: cienaCesPortXcvrVoltageChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, cienaCesPortAllTrapState needs to be set to enabled These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber. | ||
| NTF cienaCesPortXcvrVoltageLowNotification | 1.3.6.1.4.1.1271.2.2.9.0.10 | A cienaCesPortXcvrVoltageLowNotification is sent if the transceiver voltage falls below the threshold. To enable the device to send this notification: cienaCesPortXcvrVoltageChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber. | ||
| NTF cienaCesPortXcvrVoltageNormalNotification | 1.3.6.1.4.1.1271.2.2.9.0.11 | A cienaCesPortXcvrVoltageNormalNotification is sent when the transceiver voltage returns back to normal state. To enable the device to send this notification: cienaCesPortXcvrVoltageChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber. | ||
| NTF cienaCesPortXcvrBiasHighNotification | 1.3.6.1.4.1.1271.2.2.9.0.12 | A cienaCesPortXcvrBiasHighNotification is sent if the transceiver bias exceeds the threshold. To enable the device to send this notification: cienaCesPortXcvrBiasChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber. | ||
| NTF cienaCesPortXcvrBiasLowNotification | 1.3.6.1.4.1.1271.2.2.9.0.13 | A cienaCesPortXcvrBiasLowNotification is sent if the transceiver bias falls below the threshold. To enable the device to send this notification: cienaCesPortXcvrBiasChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber. | ||
| NTF cienaCesPortXcvrBiasNormalNotification | 1.3.6.1.4.1.1271.2.2.9.0.14 | A cienaCesPortXcvrBiasNormalNotification is sent when the transceiver bias returns to normal state. To enable the device to send this notification: cienaCesPortXcvrBiasChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber. | ||
| NTF cienaCesPortXcvrTxPowerHighNotification | 1.3.6.1.4.1.1271.2.2.9.0.15 | A cienaCesPortXcvrTxPowerHighNotification is sent if the transceiver TxPower exceeds the threshold. To enable the device to send this notification: cienaCesPortXcvrTxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber. | ||
| NTF cienaCesPortXcvrTxPowerLowNotification | 1.3.6.1.4.1.1271.2.2.9.0.16 | A cienaCesPortXcvrTxPowerLowNotification is sent if the transceiver TxPower falls below the threshold. To enable the device to send this notification: cienaCesPortXcvrTxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber. | ||
| NTF cienaCesPortXcvrTxPowerNormalNotification | 1.3.6.1.4.1.1271.2.2.9.0.17 | A cienaCesPortXcvrTxPowerNormalNotification is sent when the transceiver TxPower returns to normal state. To enable the device to send this notification: cienaCesPortXcvrTxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber. | ||
| NTF cienaCesPortXcvrRxPowerHighNotification | 1.3.6.1.4.1.1271.2.2.9.0.18 | A cienaCesPortXcvrRxPowerHighNotification is sent if the transceiver RxPower exceeds the threshold. To enable the device to send this notification: cienaCesPortXcvrRxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber. | ||
| NTF cienaCesPortXcvrRxPowerLowNotification | 1.3.6.1.4.1.1271.2.2.9.0.19 | A cienaCesPortXcvrRxPowerLowNotification is sent if the transceiver RxPower falls below the the threshold. To enable the device to send this notification: cienaCesPortXcvrRxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, cienaCesPortAllTrapState needs to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber. | ||
| NTF cienaCesPortXcvrRxPowerNormalNotification | 1.3.6.1.4.1.1271.2.2.9.0.20 | A cienaCesPortXcvrRxPowerNormalNotification is sent when the transceiver RxPower returns to normal state. To enable the device to send this notification: cienaCesPortXcvrRxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState needs to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber. | ||
| NTF cienaCesPortXcvrSpeedInfoMissingNotification | 1.3.6.1.4.1.1271.2.2.9.0.21 | A cienaCesPortXcvrSpeedInfoMissingNotification is sent if the transceiver speed information is not found. To enable the device to send this notification: cienaCesPortXcvrSpeedInfoTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber. | ||
| NTF cienaCesPortXcvrUncertifiedNotification | 1.3.6.1.4.1.1271.2.2.9.0.22 | A cienaCesPortXcvrUncertifiedNotification is sent if the transceiver is not certified for use by Ciena. To enable the device to send this notification: cienaCesPortXcvrUncertifiedTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cesPortAllTrapState need to be set to enabled. cienaCesPortXcvrUncertifiedTrapState is set to disabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber. | ||
| NTF cienaCesPortXcvrRxPowerHighWarningNotification | 1.3.6.1.4.1.1271.2.2.9.0.23 | A cienaCesPortXcvrRxPowerHighWarningNotification is sent if the transceiver RxPower exceeds the threshold. To enable the device to send this notification: cienaCesPortXcvrRxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber. | ||
| NTF cienaCesPortXcvrRxPowerLowWarningNotification | 1.3.6.1.4.1.1271.2.2.9.0.24 | A cienaCesPortXcvrRxPowerLowWarningNotification is sent if the transceiver RxPower falls below the the threshold. To enable the device to send this notification: cienaCesPortXcvrRxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, cienaCesPortAllTrapState needs to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber. | ||
| NTF cienaCesPortXcvrTxPowerHighWarningNotification | 1.3.6.1.4.1.1271.2.2.9.0.25 | A cienaCesPortXcvrTxPowerHighWarningNotification is sent if the transceiver TxPower exceeds the threshold. To enable the device to send this notification: cienaCesPortXcvrTxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, and cienaCesPortAllTrapState need to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber. | ||
| NTF cienaCesPortXcvrTxPowerLowWarningNotification | 1.3.6.1.4.1.1271.2.2.9.0.26 | A cienaCesPortXcvrTxPowerLowWarningNotification is sent if the transceiver TxPower falls below the the threshold. To enable the device to send this notification: cienaCesPortXcvrTxPowerChangeTrapState, cienaCesLogicalPortConfigPortAllTrapState, cienaCesPortAllTrapState needs to be set to enabled. These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortXcvrNotifChassisIndex, cienaCesPortXcvrNotifShelfIndex, cienaCesPortXcvrNotifSlotIndex, and cienaCesPortXcvrNotifPortNumber. |
RFC description
Manages port transceiver (XCVR) notifications and monitoring on Ciena CES optical transport equipment.
Start monitoring Ciena CES switch port optics (SFP/XFP) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.