CIENA-CES-PTP-MIB

All MIBs › CIENA-CES-PTP-MIB

Organization: Ciena Corp.

Last Updated: 2017-06-07

Category: Vendor: Ciena

Description: Manages IEEE 1588 Precision Time Protocol (PTP) clock synchronization on Ciena CES switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CIENA-CES-PTP-MIB?

CIENA-CES-PTP-MIB is a Ciena CES (Carrier Ethernet Switching) platform MIB for managing Physical Termination Point (PTP) attributes — physical optical line-port parameters — as clarified by its own description, rather than IEEE 1588 timing despite the similar acronym. It exposes per-port physical-layer configuration and status such as slot/port index, interface description, modulation scheme, supported OPU (Optical channel Payload Unit) types, administrative wavelength, and admin/operational state. For status monitoring it centers on hardware operational state: cienaCesPtpAdminState versus cienaCesPtpOperState reveals whether a physical line port is administratively enabled but operationally down, while cienaCesPtpModulationScheme and cienaCesPtpSupportedOpuTypes reveal the port's optical transport configuration and capabilities. It layers on top of standard interface indexing (cienaCesPtpIfIndex) to tie its physical-termination attributes to the generic interface table. It is deployed in carrier/metro optical transport networks using Ciena CES equipment with coherent/DWDM line ports. Engineers can download the CIENA-CES-PTP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CIENA-CES-PTP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ciena CES (Carrier Ethernet Switching) optical/DWDM line-port equipment

Monitoring Examples

An operator polling cienaCesPtpTable/cienaCesPtpEntry by cienaCesPtpSlotIndex and cienaCesPtpPortIndex can compare cienaCesPtpAdminState to cienaCesPtpOperState to detect a line port that is enabled but not passing traffic, and can check cienaCesPtpAdminWavelength against cienaCesPtpModulationScheme to confirm the port is provisioned with the expected optical configuration. cienaCesPtpSupportedOpuTypes shows which OPU payload types the line-port hardware can carry, useful when validating whether a port supports a required service type before provisioning.

What Can Be Monitored

physical line-port admin state
physical line-port operational state
modulation scheme
supported OPU (Optical Payload Unit) types
administrative wavelength
port slot/port index mapping

Imported Objects

From CIENA-SMI

cienaCesConfig	OBJECT-IDENTITY
cienaCesNotifications	OBJECT-IDENTITY

From CIENA-TC

CienaGlobalState

From IF-MIB

InterfaceIndex

From SNMPv2-SMI

MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
cienaCesPtpMIB	1.3.6.1.4.1.1271.2.1.38			This module defines device configuration associated with PTP (Physical Termination Point) attributes.
cienaCesPtpMIBObjects	1.3.6.1.4.1.1271.2.1.38.1
cienaCesPtp	1.3.6.1.4.1.1271.2.1.38.1.1
cienaCesPtpTable	1.3.6.1.4.1.1271.2.1.38.1.1.1		not-accessible	A table describing PTP attributes.
cienaCesPtpEntry	1.3.6.1.4.1.1271.2.1.38.1.1.1.1		not-accessible	An entry in the PTP table.
NUM cienaCesPtpIfIndex	1.3.6.1.4.1.1271.2.1.38.1.1.1.1.1	InterfaceIndex	not-accessible	The interface index of the PTP.
U32 cienaCesPtpSlotIndex	1.3.6.1.4.1.1271.2.1.38.1.1.1.1.2	Unsigned32	read-only	Indicates the slot index associated with the PTP.
U32 cienaCesPtpPortIndex	1.3.6.1.4.1.1271.2.1.38.1.1.1.1.3	Unsigned32	read-only	Indicates the port index associated with the PTP.
U32 cienaCesPtpPortNumber	1.3.6.1.4.1.1271.2.1.38.1.1.1.1.4	Unsigned32	read-only	Indicates the port number associated with the PTP.
STR cienaCesPtpIfDescr	1.3.6.1.4.1.1271.2.1.38.1.1.1.1.5	DisplayString	read-only	A textual string containing information about the PTP interface.
STR cienaCesPtpModulationScheme	1.3.6.1.4.1.1271.2.1.38.1.1.1.1.6	DisplayString	read-only	A textual string containing the modulation scheme of the PTP.
BIT cienaCesPtpSupportedOpuTypes	1.3.6.1.4.1.1271.2.1.38.1.1.1.1.7	Bits	read-only	This object represents all supported OPU payload types for the PTP. The individual bit position should be set to 1 for each payload type supported on the PTP and 0 if the payload type is unsupported.
CIE cienaCesPtpAdminState	1.3.6.1.4.1.1271.2.1.38.1.1.1.1.8	CienaGlobalState	read-only	The administrative state of the PTP.
CIE cienaCesPtpOperState	1.3.6.1.4.1.1271.2.1.38.1.1.1.1.9	CienaGlobalState	read-only	The operational state of the PTP.
PTP cienaCesPtpAdminWavelength	1.3.6.1.4.1.1271.2.1.38.1.1.1.1.10	PtpHundredths	read-only	The wavelength of the laser expressed in nm. This value is directly related to cienaCesPtpAdminFrequency and will be 0.00 when the laser is unset or disabled. The laser wavelength (or frequency) must be set before the laser can be turned on.
PTP cienaCesPtpAdminFrequency	1.3.6.1.4.1.1271.2.1.38.1.1.1.1.11	PtpHundredths	read-only	The frequency of the laser expressed in GHz. This value is directly related to cienaCesPtpAdminWavelength and will be 0.00 when the laser is unset or disabled. The laser frequency (or wavelength) must be set before the laser can be turned on.
T/F cienaCesPtpTxPowerReduction	1.3.6.1.4.1.1271.2.1.38.1.1.1.1.12	TruthValue	read-only	This object has a value of true(1) when tx power reduction (TX Blanking) is on and false(2) when it is off. The tx power reduction mode cannot be turned on unless the OTN service layer is disabled.
PTP cienaCesPtpTxPower	1.3.6.1.4.1.1271.2.1.38.1.1.1.1.13	PtpHundredths	read-only	The output power of the laser expressed in dBm.
INT cienaCesPtpLineSysType	1.3.6.1.4.1.1271.2.1.38.1.1.1.1.14	INTEGER	read-only	The line system type of the PTP. The PTP must be otn-service disabled before this value may be changed.
INT cienaCesPtpOptimizationMode	1.3.6.1.4.1.1271.2.1.38.1.1.1.1.15	INTEGER	read-only	The performance optimization mode. The PTP must be otn-service disabled before this value may be changed.
INT cienaCesPtpWavelengthSpacing	1.3.6.1.4.1.1271.2.1.38.1.1.1.1.16	INTEGER	read-only	Wavelength spacing indicates the width of the wavelength expressed in GHz. The PTP must be otn-service disabled before this value may be changed.
INT cienaCesPtpSpectralOccupancy	1.3.6.1.4.1.1271.2.1.38.1.1.1.1.17	INTEGER	read-only	The spectral occupancy of the PTP.
INT cienaCesPtpTxTuningMode	1.3.6.1.4.1.1271.2.1.38.1.1.1.1.18	INTEGER	read-only	The tuning mode of the PTP.
T/F cienaCesPtpRotation	1.3.6.1.4.1.1271.2.1.38.1.1.1.1.19	TruthValue	read-only	This object has a value of true(1) when the rotation option is on and false(2) when it is off.
INT cienaCesPtpCarrierCentering	1.3.6.1.4.1.1271.2.1.38.1.1.1.1.20	INTEGER	read-only	The carrier centering mode of the PTP.
INT cienaCesPtpOchEnmMode	1.3.6.1.4.1.1271.2.1.38.1.1.1.1.21	INTEGER	read-only	The interleaver mode of the PTP.
T/F cienaCesPtpChContentionDetect	1.3.6.1.4.1.1271.2.1.38.1.1.1.1.22	TruthValue	read-only	This object has a value of true(1) when channel contention detection is on and false(2) when it is off.
T/F cienaCesPtpStormControl	1.3.6.1.4.1.1271.2.1.38.1.1.1.1.23	TruthValue	read-only	This object has a value of true(1) when storm protection is on and false(2) when it is off.
INT cienaCesPtpStormMode	1.3.6.1.4.1.1271.2.1.38.1.1.1.1.24	INTEGER	read-only	The storm configuration of the PTP.
I32 cienaCesPtpStormPath1	1.3.6.1.4.1.1271.2.1.38.1.1.1.1.25	Integer32	read-only	Storm dispersion path 1.
I32 cienaCesPtpStormPath2	1.3.6.1.4.1.1271.2.1.38.1.1.1.1.26	Integer32	read-only	Storm dispersion path 2.
T/F cienaCesPtpSpliCntrl	1.3.6.1.4.1.1271.2.1.38.1.1.1.1.27	TruthValue	read-only	This object has a value of true(1) when spli is enabled and false(2) when it is disabled.
NUM cienaCesPtpChildOtuIfIndex	1.3.6.1.4.1.1271.2.1.38.1.1.1.1.28	InterfaceIndex	read-only	The interface index of the OTU mapped to the PTP.
cienaCesPtpMIBConformance	1.3.6.1.4.1.1271.2.1.38.2
cienaCesPtpMIBCompliances	1.3.6.1.4.1.1271.2.1.38.2.1
cienaCesPtpMIBGroups	1.3.6.1.4.1.1271.2.1.38.2.2
cienaCesPtpMIBNotificationsPrefix	1.3.6.1.4.1.1271.2.2.38
cienaCesPtpMIBNotifications	1.3.6.1.4.1.1271.2.2.38.0
NTF cienaCesPtpAdminStateChangeNotification	1.3.6.1.4.1.1271.2.2.38.0.1			This notification is sent when cienaCesPtpAdminState is modified.
NTF cienaCesPtpOperStateChangeNotification	1.3.6.1.4.1.1271.2.2.38.0.2			This notification is sent when cienaCesPtpOperState is modified.
NTF cienaCesPtpAdminWavelengthChangeNotification	1.3.6.1.4.1.1271.2.2.38.0.3			This notification is sent when cienaCesPtpAdminWavelength is modified.
NTF cienaCesPtpAdminFrequencyChangeNotification	1.3.6.1.4.1.1271.2.2.38.0.4			This notification is sent when cienaCesPtpAdminFrequency is modified.
NTF cienaCesPtpTxPowerChangeNotification	1.3.6.1.4.1.1271.2.2.38.0.5			This notification is sent when cienaCesPtpTxPower is administratively modified.
NTF cienaCesPtpLineSysTypeChangeNotification	1.3.6.1.4.1.1271.2.2.38.0.6			This notification is sent when cienaCesPtpLineSysType is modified.
NTF cienaCesPtpOptimizationModeChangeNotification	1.3.6.1.4.1.1271.2.2.38.0.7			This notification is sent when cienaCesPtpOptimizationMode is modified.
NTF cienaCesPtpWavelengthSpacingChangeNotification	1.3.6.1.4.1.1271.2.2.38.0.8			This notification is sent when cienaCesPtpWavelengthSpacing is modified.
NTF cienaCesPtpCreatedNotification	1.3.6.1.4.1.1271.2.2.38.0.9			This notification is sent when a PTP is created.
NTF cienaCesPtpDeletedNotification	1.3.6.1.4.1.1271.2.2.38.0.10			This notification is sent when a PTP is deleted.

RFC description

Manages Precision Time Protocol (PTP) synchronization on Ciena CES (Carrier Ethernet Services) platforms, monitoring clock accuracy and grandmaster status.

Start monitoring Ciena CES optical/DWDM line-port equipment with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CIENA-CES-PTP-MIB

What Is CIENA-CES-PTP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description