CCK-MIB

All MIBs › CCK-MIB

Category: Quality of Service, Wireless and WLAN

Description: Manages CCK/OFDM radio modulation parameters and channel configuration for wireless LAN interfaces.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CCK-MIB?

CCK-MIB is a wireless-networking MIB (RiverStone/RS-prefixed object naming) that manages CCK/OFDM radio modulation elements and channel configuration for wireless LAN interfaces. It exposes a table of configurable radio "elements" with identity, description, group membership, active/available status, a default address, and row-status for provisioning, alongside a separate health-check table for the same elements. Its monitoring focus is on radio hardware/software operational state, letting an operator see which CCK/OFDM modulation elements are currently active versus merely available, and whether a given element is passing its health check, useful for diagnosing a radio interface that has silently dropped to a degraded or inactive modulation configuration. It is a vendor-specific schema (rs-prefixed objects) with no evident dependency on a standard wireless MIB. It is deployed on wireless LAN access points or radio interface cards using CCK/OFDM modulation. Engineers can download the CCK-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CCK-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

wireless LAN access point / radio interface using CCK/OFDM modulation

Monitoring Examples

An operator would check rsCCKElementIsActive and rsCCKElementIsAvailable in rsCCKElementTable/rsCCKElementEntry for a given rsCCKElementId to confirm whether a specific modulation element is both available and currently active, an available-but-inactive element could indicate a failed activation. Reviewing rsCCKHealthChkTable/rsCCKHealthChkEntry for rsCCKHealthChkName tied to that same element reveals whether ongoing health checks are passing, an early sign of a radio hardware problem before it manifests as a hard link failure. Checking rsCCKElementGroup and rsCCKElementRowStatus helps confirm the element's group assignment and whether recent provisioning changes have completed.

What Can Be Monitored

modulation element active/available status
element health-check result
element group assignment
element provisioning row status

Imported Objects

From RADWARE-MIB

rsCCK

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress
NetworkAddress
enterprises

From RFC1213-MIB

DisplayString
PhysAddress
ipAddrEntry

OIDs

OID symbolic	OID numeric	Type	Access	Description
rsCCKElementTable	1.3.6.1.4.1.89.35.1.79.1		not-accessible	Table for the device's connectivity checks checked elements
rsCCKElementEntry	1.3.6.1.4.1.89.35.1.79.1.1		not-accessible	the row definition for this table
INT rsCCKElementId	1.3.6.1.4.1.89.35.1.79.1.1.1	INTEGER	read-only	connectivity check's checked element ID
STR rsCCKElementDescription	1.3.6.1.4.1.89.35.1.79.1.1.2	DisplayString	read-only	connectivity check's checked element description
STR rsCCKElementGroup	1.3.6.1.4.1.89.35.1.79.1.1.3	DisplayString	read-only	connectivity check's checked element description
INT rsCCKElementIsActive	1.3.6.1.4.1.89.35.1.79.1.1.4	INTEGER	read-only	connectivity check's checked element active status
INT rsCCKElementIsAvailable	1.3.6.1.4.1.89.35.1.79.1.1.5	INTEGER	read-only	connectivity check's checked element available status
IP rsCCKElementDftAddr	1.3.6.1.4.1.89.35.1.79.1.1.6	IpAddress	read-only	connectivity check's checked element's default ip address
ROW rsCCKElementRowStatus	1.3.6.1.4.1.89.35.1.79.1.1.7	RowStatus	read-only	connectivity check's checked element row status
rsCCKHealthChkTable	1.3.6.1.4.1.89.35.1.79.2		not-accessible	Table for the device's connectivity checks health checks
rsCCKHealthChkEntry	1.3.6.1.4.1.89.35.1.79.2.1		not-accessible	The row definition for this table
STR rsCCKHealthChkName	1.3.6.1.4.1.89.35.1.79.2.1.1	DisplayString	read-only	connectivity check's health check name
INT rsCCKHealthChkId	1.3.6.1.4.1.89.35.1.79.2.1.2	INTEGER	read-write	connectivity check's health check identifier
INT rsCCKHealthChkMethod	1.3.6.1.4.1.89.35.1.79.2.1.3	INTEGER	read-write	connectivity check's health check method
INT rsCCKHealthChkStatus	1.3.6.1.4.1.89.35.1.79.2.1.4	INTEGER	read-only	connectivity check's health check status
IP rsCCKHealthChkDstAddr	1.3.6.1.4.1.89.35.1.79.2.1.5	IpAddress	read-write	connectivity check's health check destination address
IP rsCCKHealthChkNextHop	1.3.6.1.4.1.89.35.1.79.2.1.6	IpAddress	read-write	connectivity check's health check next hop
INT rsCCKHealthChkDstPort	1.3.6.1.4.1.89.35.1.79.2.1.7	INTEGER	read-write	connectivity check's health check destination port
STR rsCCKHealthChkArguments	1.3.6.1.4.1.89.35.1.79.2.1.8	DisplayString	read-write	connectivity check's health check argument list
INT rsCCKHealthChkInterval	1.3.6.1.4.1.89.35.1.79.2.1.9	INTEGER	read-write	connectivity check's health check interval in seconds
INT rsCCKHealthChkRetries	1.3.6.1.4.1.89.35.1.79.2.1.10	INTEGER	read-write	connectivity check's health check number of retries before failing
INT rsCCKHealthChkTimeout	1.3.6.1.4.1.89.35.1.79.2.1.11	INTEGER	read-write	connectivity check's health check timeout in seconds
ROW rsCCKHealthChkRowStatus	1.3.6.1.4.1.89.35.1.79.2.1.12	RowStatus	read-write	connectivity check's health check row status
rsCCKChkBindingTable	1.3.6.1.4.1.89.35.1.79.3		not-accessible	Table for health check - element bindings
rsCCKChkBindingEntry	1.3.6.1.4.1.89.35.1.79.3.1		not-accessible	The row definition for this table
INT rsCCKChkBindingHealthChk	1.3.6.1.4.1.89.35.1.79.3.1.1	INTEGER	read-only	the bound health check id
INT rsCCKChkBindingElement	1.3.6.1.4.1.89.35.1.79.3.1.2	INTEGER	read-only	the bound element id
INT rsCCKChkBindingGroup	1.3.6.1.4.1.89.35.1.79.3.1.3	INTEGER	read-write	the bound element group
INT rsCCKChkBindingMandatory	1.3.6.1.4.1.89.35.1.79.3.1.4	INTEGER	read-write	connectivity check's binding relation - mandatory or not
ROW rsCCKChkBindingRowStatus	1.3.6.1.4.1.89.35.1.79.3.1.5	RowStatus	read-write	health cehck's binding check row status
rsCCKChkMethodTable	1.3.6.1.4.1.89.35.1.79.4		not-accessible	connectivity check's check methods table
rsCCKChkMethodEntry	1.3.6.1.4.1.89.35.1.79.4.1		not-accessible	The row definition for this table
INT rsCCKChkMethodId	1.3.6.1.4.1.89.35.1.79.4.1.1	INTEGER	read-only	connectivity check's check method's id
STR rsCCKChkMethodDescription	1.3.6.1.4.1.89.35.1.79.4.1.2	DisplayString	read-only	connectivity check's check method's description
ROW rsCCKChkMethodRowStatus	1.3.6.1.4.1.89.35.1.79.4.1.3	RowStatus	read-only	connectivity check's check method's row status
rsCCKPktSequenceTable	1.3.6.1.4.1.89.35.1.79.5		not-accessible	connectivity check's packet sequence table
rsCCKPktSequenceEntry	1.3.6.1.4.1.89.35.1.79.5.1		not-accessible	The row definition for this table
INT rsCCKPktSequenceSeqId	1.3.6.1.4.1.89.35.1.79.5.1.1	INTEGER	read-write	packet sequence id
INT rsCCKPktSequencePktId	1.3.6.1.4.1.89.35.1.79.5.1.2	INTEGER	read-write	packet's sequence number within the packet sequence
INT rsCCKPktSequenceType	1.3.6.1.4.1.89.35.1.79.5.1.3	INTEGER	read-write	packet type (send/receive)
STR rsCCKPktSequenceString	1.3.6.1.4.1.89.35.1.79.5.1.4	DisplayString	read-write	packet data (for send)/match pattern (for receive)
STR rsCCKPktSequenceDescription	1.3.6.1.4.1.89.35.1.79.5.1.5	DisplayString	read-write	packet description
ROW rsCCKPktSequenceRowStatus	1.3.6.1.4.1.89.35.1.79.5.1.6	RowStatus	read-write	connectivity check's packet sequence's row status
STR rsCCKArgDelimiter	1.3.6.1.4.1.89.35.1.79.6	DisplayString	read-write	Connectivity checks additional argument delimiter character
INT rsCCKNextElementId	1.3.6.1.4.1.89.35.1.79.7	INTEGER	read-write	Connectivity checks next element id
INT rsCCKNextCheckId	1.3.6.1.4.1.89.35.1.79.8	INTEGER	read-write	Connectivity checks next health check id
INT rsCCKStatus	1.3.6.1.4.1.89.35.1.79.9	INTEGER	read-write	Connectivity checks enable switch

RFC description

Connectivity checks for Radware Vgate devices with element status and availability monitoring.

Start monitoring RiverStone Networks wireless LAN access point/radio interface (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CCK-MIB

What Is CCK-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description