RADWARE-MIB

All MIBs › RADWARE-MIB

Category: Load Balancing and ADC

Description: Provides the base MIB structure for Radware application delivery controller management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RADWARE-MIB?

RADWARE-MIB provides the base MIB structure for Radware application delivery controller (ADC) devices, covering system identification, bridging configuration, and alarm/error reporting. It exposes objects for device actions, firmware file names, bridge type and version/feature/license information, ARP timeout configuration, ICMP handling, and a community-string management table. It supports monitoring of software status through rndBrgVersion (firmware version), rndErrorDesc/rndErrorSeverity (error condition reporting), and rndBridgeAlarm (bridging-related alarm state), giving administrators visibility into both configuration integrity and active fault conditions. As a proprietary Radware enterprise MIB, it forms the foundation that other Radware product-specific MIBs (e.g., load balancing) build upon rather than depending on external standards. It is deployed on Radware application delivery controllers and traffic management appliances in data center and enterprise network environments. Consulting the RADWARE-MIB MIB definitions directly is often necessary since object names like rndBrgVersion and rndErrorDesc are not documented as thoroughly as those in standards-based MIBs.

IPNetwork Monitor allows you to monitor SNMP objects defined in RADWARE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Radware application delivery controller (ADC) appliances, entire product line (base enterprise MIB)

Monitoring Examples

An admin would poll rndErrorDesc and rndErrorSeverity to detect and triage active error conditions on the device, and check rndBridgeAlarm for bridging-layer alarms indicating a network loop or link issue. The rndCommunityTable would be reviewed to confirm which SNMP communities have management access, while rndBrgVersion and rndBrgFeatures/rndBrgLicense would be checked during an inventory audit to confirm the firmware version and licensed feature set are as expected.

What Can Be Monitored

error description and severity
bridge alarm status
bridge firmware version
bridge features and license state
SNMP community table entries
ICMP transmission enable state

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress
NetworkAddress
enterprises

From RFC1213-MIB

DisplayString
PhysAddress
ipAddrEntry

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF abortTftp	1.3.6.1.4.1.89.0.13			This trap indicates that in the device aborted a TFTP session with the management station. variable rndErrorDesc and rndErrorSeverity provides the actual message text and severity respectively.
arpSpec	1.3.6.1.4.1.89.26.4
NTF autoConfigurationCompleted	1.3.6.1.4.1.89.0.50			This trap indicates that auto comfiguration completetd succssefully. The bound variable rndErrorDesc, rndErrorSeverity(== info )
NTF endTftp	1.3.6.1.4.1.89.0.12			This trap indicates that in the device finished a TFTP transaction with the management station. variable rndErrorDesc and rndErrorSeverity provides the actual message text and severity respectively.
NTF errorsDuringInit	1.3.6.1.4.1.89.0.61
STR eventDesc	1.3.6.1.4.1.89.29.6.1.2	DisplayString	read-only	The event discription, this text will include time and severity.
eventMessageEntry	1.3.6.1.4.1.89.29.6.1		not-accessible	The row definition for this table.
eventMessageTable	1.3.6.1.4.1.89.29.6		not-accessible	The Event Message table of the agent
INT eventNum	1.3.6.1.4.1.89.29.6.1.1	INTEGER	read-only	The event number,the index of this table.
NTF facsAccessVoilation	1.3.6.1.4.1.89.0.49			This trap indicates that message that fits FACS statenebt with operation blockAndReport was forward to the interface.The bound variable rndErrorDesc, rndErrorSeverity(== info ) and interface Number.
NTF forwardingTabOverflow	1.3.6.1.4.1.89.0.51			This trap indicates that an overflow condition has occurred in the layer II Forward Table. The bound variable rndErrorDesc, rndErrorSeverity(== warning )
genGroup	1.3.6.1.4.1.89.2.11
STR genGroupConfigurationSymbol	1.3.6.1.4.1.89.2.11.2	DisplayString	read-only	Defines the Configuration Symbol attached to any hardware module manufactured by LANNET. One single character A..Z defines the CS version.
INT genGroupHWStatus	1.3.6.1.4.1.89.2.11.3	INTEGER	read-only	This attribute describes the status of the group hardware as detected by the sensors software.
STR genGroupHWVersion	1.3.6.1.4.1.89.2.11.1	DisplayString	read-only	Defines the HW version of the product.
icmpSpec	1.3.6.1.4.1.89.26.2
INT ipLeakExtDirectToOspf	1.3.6.1.4.1.89.26.7.5	INTEGER	read-write	This parameter controls leaking (redistribution) into OSPF of direct routes external to OSPF, i.e. routes to local network corresponding to IP interfaces on which OSPF is disabled. When enabled, all such direct routes are advertised into OSPF as external routes.
INT ipLeakOspfToRip	1.3.6.1.4.1.89.26.7.3	INTEGER	read-write	This parameter controls leaking (redistribution) of routes from OSPF to RIP. If enabled, all routes learned via OSPF are advertised into RIP.
INT ipLeakRipToOspf	1.3.6.1.4.1.89.26.7.4	INTEGER	read-write	This parameter controls leaking (redistribution) of routes from RIP to OSPF. If enabled, all routes learned via RIP are advertised into OSPF as external routes.
INT ipLeakStaticToOspf	1.3.6.1.4.1.89.26.7.2	INTEGER	read-write	This parameter controls leaking (redistribution) of static routes into OSPF. When enabled, all routes inserted to the IP routing table via SNMP are advertised into OSPF as external routes.
INT ipLeakStaticToRip	1.3.6.1.4.1.89.26.7.1	INTEGER	read-write	This parameter controls leaking (redistribution) of static routes to RIP. When enabled, all routes inserted to the IP routing table via SNMP are advertised into RIP.
INT ipRedundAdminStatus	1.3.6.1.4.1.89.26.6.1	INTEGER	read-write	This variable controls the IP Redundancy method in the device. In case the value is enable, it means the ARP redundancy mechanism is running .If the value is vrrp, it means the former redundancy mechanism is disabled, and the vrrp mechanism is enabled. If the value is disable, both redundancy methods are disabled
ipRedundancy	1.3.6.1.4.1.89.26.6
INT ipRedundOperStatus	1.3.6.1.4.1.89.26.6.2	INTEGER	read-only	obsolete
ipRedundRoutersEntry	1.3.6.1.4.1.89.26.6.3.1		not-accessible	The row definition for this table.
IP ipRedundRoutersIfAddr	1.3.6.1.4.1.89.26.6.3.1.1	IpAddress	read-only	The Ip address of the IP interface on which the redundancy feature is operational.
IP ipRedundRoutersMainRouterAddr	1.3.6.1.4.1.89.26.6.3.1.2	IpAddress	read-only	The Ip address of the polled main router.
INT ipRedundRoutersOperStatus	1.3.6.1.4.1.89.26.6.3.1.3	INTEGER	read-only	If active, the main router is considered inoperational and the IP interface operates as its backup.
INT ipRedundRoutersPollInterval	1.3.6.1.4.1.89.26.6.3.1.4	INTEGER	read-write	Polling interval for this router (in seconds). If 0 the router is not polled.
INT ipRedundRoutersStatus	1.3.6.1.4.1.89.26.6.3.1.6	INTEGER	read-write	Entry status
ipRedundRoutersTable	1.3.6.1.4.1.89.26.6.3		not-accessible	List of IP addresses backed up by this router.
INT ipRedundRoutersTimeout	1.3.6.1.4.1.89.26.6.3.1.5	INTEGER	read-write	Interval in seconds during which the backed-up router must signal. If it does not signal, it is considered inoperational and the IP interface starts operating as backup.
ipRipFilter	1.3.6.1.4.1.89.26.8
ipRouteLeaking	1.3.6.1.4.1.89.26.7
ipSpec	1.3.6.1.4.1.89.26
NTF ipxRipTblOverflow	1.3.6.1.4.1.89.0.36			This trap indicates that in an OpenGate IPX RIP table overflow. The bound variable rndErrorDesc, rndErrorSeverity provides the actual message text and severity respectively.
NTF ipxSapTblOverflow	1.3.6.1.4.1.89.0.37			This trap indicates that in an OpenGate IPX SAP table overflow. The bound variable rndErrorDesc, rndErrorSeverity provides the actual message text and severity respectively.
IP lreBoxAgentIP	1.3.6.1.4.1.89.26.10	IpAddress	read-write
INT lreQueSourceSelect	1.3.6.1.4.1.89.29.7.24	INTEGER	read-write
INT lreResetDstMacBit46	1.3.6.1.4.1.89.29.7.23	INTEGER	read-write
INT lreResetDstMacBit47	1.3.6.1.4.1.89.29.7.25	INTEGER	read-write
lreVnResposibilityEntry	1.3.6.1.4.1.89.29.7.17.1		not-accessible	The row definition for this table.
lreVnResposibilityTable	1.3.6.1.4.1.89.29.7.17		not-accessible	The Bridge Responsibility Table
ROW lreVnRespStatus	1.3.6.1.4.1.89.29.7.17.1.2	RowStatus	read-write
INT lreVnRespVn	1.3.6.1.4.1.89.29.7.17.1.1	INTEGER	read-write
CTR reaBrgDiscards	1.3.6.1.4.1.89.29.7.13	Counter	read-only	The number of bridging datagrams have been discarded by the Platform.
INT reaBrgFftEntryNum	1.3.6.1.4.1.89.29.7.12.1.1	INTEGER	read-only
INT reaBrgFftFacsDstIndex	1.3.6.1.4.1.89.29.7.12.1.6	INTEGER	read-only
INT reaBrgFftFacsSrcIndex	1.3.6.1.4.1.89.29.7.12.1.5	INTEGER	read-only
PHY reaBrgFftMacAddr	1.3.6.1.4.1.89.29.7.12.1.2	PhysAddress	read-only
INT reaBrgFftPortNum	1.3.6.1.4.1.89.29.7.12.1.4	INTEGER	read-only
INT reaBrgFftReNum	1.3.6.1.4.1.89.29.7.12.1.3	INTEGER	read-only
CTR reaBrgForwards	1.3.6.1.4.1.89.29.7.14	Counter	read-only	The number of bridging datagrams have been forwarded by the Platform.
INT reaBridgeEnable	1.3.6.1.4.1.89.29.7.6	INTEGER	read-write	The Platform will perform bridging if only if this variable's value is enable.
reaBridgeFftEntry	1.3.6.1.4.1.89.29.7.12.1		not-accessible	The row definition for this table.
reaBridgeFftTable	1.3.6.1.4.1.89.29.7.12		not-accessible	The Bridge Fast Forwarding Table
INT reaBufFree	1.3.6.1.4.1.89.29.7.22	INTEGER	read-only	The number of free buffers.
INT reaFacsEnable	1.3.6.1.4.1.89.29.7.7	INTEGER	read-write	The RS and Platform will perform FASC if only if this variable's value is enable.
INT reaFftHashMaxChain	1.3.6.1.4.1.89.29.7.2	INTEGER	read-write	This variable specifies the maximum length of hash chains in the Fast Forwarding Tables.
OCT reaIpFftApplFlags	1.3.6.1.4.1.89.29.7.15.1.11	OCTET STRING	read-only	A bit mask that defines the applications associated with this entry: __________________________________________ \| Byte 1\|Byte 2 \|Byte 3 \| ....\|Byte 20 \| \|87654321\| \| 87654321\| \|________\|_______________________________\| Byte1 : bit1: Server Dispatcher Client
IP reaIpFftDstIpAddr	1.3.6.1.4.1.89.29.7.15.1.2	IpAddress	read-only
IP reaIpFftDstIpMask	1.3.6.1.4.1.89.29.7.15.1.3	IpAddress	read-only
PHY reaIpFftDstMacAddr	1.3.6.1.4.1.89.29.7.15.1.6	PhysAddress	read-only
reaIpFftEntry	1.3.6.1.4.1.89.29.7.15.1		not-accessible	The row definition for this table.
INT reaIpFftEntryNum	1.3.6.1.4.1.89.29.7.15.1.1	INTEGER	read-only
INT reaIpFftFacsDstIndex	1.3.6.1.4.1.89.29.7.15.1.10	INTEGER	read-only
INT reaIpFftFacsSrcIndex	1.3.6.1.4.1.89.29.7.15.1.9	INTEGER	read-only
INT reaIpFftPortNum	1.3.6.1.4.1.89.29.7.15.1.8	INTEGER	read-only
INT reaIpFftRangeType	1.3.6.1.4.1.89.29.7.15.1.4	INTEGER	read-only
INT reaIpFftReNum	1.3.6.1.4.1.89.29.7.15.1.7	INTEGER	read-only
PHY reaIpFftSrcMacAddr	1.3.6.1.4.1.89.29.7.15.1.5	PhysAddress	read-only
reaIpFftTable	1.3.6.1.4.1.89.29.7.15		not-accessible	The IP Fast Forwarding Table
CTR reaIpForwardDatagrams	1.3.6.1.4.1.89.29.7.8	Counter	read-only	The number of IP datagrams have been forwarded by the Platform.
INT reaIpForwardEnable	1.3.6.1.4.1.89.29.7.4	INTEGER	read-write	The Platform will perform fast IP forwarding if only if this variable's value is enable.
CTR reaIpInDiscards	1.3.6.1.4.1.89.29.7.9	Counter	read-only	The number of IP datagrams have been dicarded by the Platform.
INT reaIpRemoteAgingTime	1.3.6.1.4.1.89.29.7.1	INTEGER	read-write	This variable specifies aging time used by the REA for remote entries in the Ip Fast Forwarding Table.
PHY reaIpxFftDstMacAddr	1.3.6.1.4.1.89.29.7.16.1.5	PhysAddress	read-only
INT reaIpxFftDstNetid	1.3.6.1.4.1.89.29.7.16.1.2	INTEGER	read-only
reaIpxFftEntry	1.3.6.1.4.1.89.29.7.16.1		not-accessible	The row definition for this table.
INT reaIpxFftEntryNum	1.3.6.1.4.1.89.29.7.16.1.1	INTEGER	read-only
INT reaIpxFftFacsDstIndex	1.3.6.1.4.1.89.29.7.16.1.9	INTEGER	read-only
INT reaIpxFftFacsSrcIndex	1.3.6.1.4.1.89.29.7.16.1.8	INTEGER	read-only
INT reaIpxFftPortNum	1.3.6.1.4.1.89.29.7.16.1.7	INTEGER	read-only
INT reaIpxFftRangeType	1.3.6.1.4.1.89.29.7.16.1.3	INTEGER	read-only
INT reaIpxFftReNum	1.3.6.1.4.1.89.29.7.16.1.6	INTEGER	read-only
PHY reaIpxFftSrcMacAddr	1.3.6.1.4.1.89.29.7.16.1.4	PhysAddress	read-only
reaIpxFftTable	1.3.6.1.4.1.89.29.7.16		not-accessible	The IPX Fast Forwarding Table
CTR reaIpxForwardDatagrams	1.3.6.1.4.1.89.29.7.10	Counter	read-only	The number of IPX datagrams have been forwarded by the Platform.
INT reaIpxForwardEnable	1.3.6.1.4.1.89.29.7.5	INTEGER	read-write	The Platform will perform fast IPX forwarding if only if this variable's value is enable.
CTR reaIpxInDiscards	1.3.6.1.4.1.89.29.7.11	Counter	read-only	The number of IP datagrams have been dicarded by the Platform.
INT reaMltcstBitOn	1.3.6.1.4.1.89.29.7.3	INTEGER	read-write
CTR reaRsQueueDiscards	1.3.6.1.4.1.89.29.7.21	Counter	read-only
INT reaSrcAddrValidationEnable	1.3.6.1.4.1.89.29.7.20	INTEGER	read-write	The Platform will verify the source address of incoming IP datagram.
INT reaSrcViolationEnable	1.3.6.1.4.1.89.29.7.18	INTEGER	read-write	The Platform will perform the Source Port Violation Procedure if only if this variable's value is enable.
INT reaSrcViolationTrapEnable	1.3.6.1.4.1.89.29.7.19	INTEGER	read-write	The RS will send the Source Port Violation TRAP messages if only if this variable's value is enable.
reaTunning	1.3.6.1.4.1.89.29.7
NTF resetRequired	1.3.6.1.4.1.89.0.10			This trap indicates that in order to perform the last SET request, a reset operation of the router/bridge is required. This occurs when the layer 2 routing algorithm is changed between SPF and Spanning Tree. The reset can be performed manually or using the variable rndAction.
rip2Spec	1.3.6.1.4.1.89.26.3
rnd	1.3.6.1.4.1.89
INT rndAction	1.3.6.1.4.1.89.1.2	INTEGER	read-write	This variable enables the operator to perform one of the specified actions on the tables maintained by the network device. Send actions require support of proprietery File exchange protocol.
INT rndAlarmEnabling	1.3.6.1.4.1.89.35.2.2.1	INTEGER	read-write	Indicates whether alarms should be issued to the high-level NMS
INT rndAlarmInterval	1.3.6.1.4.1.89.35.2.2.2	INTEGER	read-write	Indicates the minimal period of time which must pass after issuing an alarm before issuing the same alarm again.
INT rndAlarmMaxTreshold	1.3.6.1.4.1.89.35.2.4.1.8	INTEGER	read-write	The value of the monitored object instance, the exceeding of which will cause the generation of an alarm to the high-level management station.
INT rndAlarmMinTreshold	1.3.6.1.4.1.89.35.2.4.1.9	INTEGER	read-write	If the value of the monitored object instance falls below the value assigned to rndAlarmMinTreshold, an alarm to the high-level management station will be issued.
rndAlarmOptions	1.3.6.1.4.1.89.35.2.2
rndApplications	1.3.6.1.4.1.89.35
rndBootP	1.3.6.1.4.1.89.24
INT rndBootPRelaySecThreshold	1.3.6.1.4.1.89.24.2	INTEGER	read-write	BootP requests are relayed only if their SEC field is greater or equal to the threshold value in order to allow local BootP Servers to answer first.
IP rndBootPServerAddress	1.3.6.1.4.1.89.24.1	IpAddress	read-write	The IPAddress of the BOOTP server. the OpenGate will act as a BootP relay if this parameter is not equale to 0.0.0.0.
OCT rndBrgFeatures	1.3.6.1.4.1.89.2.5	OCTET STRING	read-only	A bit mask that defines the features supported by a particular configuration of this network element: __________________________________________ \| Byte 1\|Byte 2 \|Byte 3 \| ....\|Byte 20 \| \|87654321\| \| 87654321\| \|________\|_______________________________\| Byte1 : bit1: TX Block mask bit2: Source Routing Encapulation bit3: SNA/SDLC bit4: Frame Relay bit5: SNMP bit6: LAN Manager bit7: High Performance bit8: Translation Byte2 : bit1: DEC Router bit2: IPX Router bit3: IP Router Byte3 : bit1: Dial Up Backup bit2: COD bit3: FACS bit4: Load Balance bit5: Remote Configuration bit6: RIP 2 bit7: OSPF bit8: IPX RIP/SAP Filter Byte4 : bit1: BootP Server bit2: BootP Client bit3: Compression bit4: V25.bis bit5: ISDN bit6: CODv2 bit7: NSPF bit8: UDP Relay Byte5 bit1:VirtualLAN bit2:Static IP Multicast bit3:IP Redundancy bit4:CCM2 bit5:ISDN Bonding bit6:Backup Link Selection -- for the VAN/Rdapter ver 4.0 bit7:IP/IPX Forwarding -- for the WANgate ver 4.0 bit8:Improved COD Byte6 bit1: Server Disptacher bit2: ISDN_US -- for the VANSX/WANGATE ver 5.0 bit3: PPP bit4: IP Rip Filter -- for Vgate3 bit5: Zero Hop Routing -- for Vgate3 bit6: ISDN Japan Byte7 bit1: With unmanaged Switch bit2: 2 LANs bit3: OSPF Ver 2.0 bit4: FACS Ver 2.0 bit5: Multiple WEB Farm bit6: Backup Server
OCT rndBrgLicense	1.3.6.1.4.1.89.2.6	OCTET STRING	read-write	This parameter is used for entering a s/w license number for a device. A separate license number is supplied for each device.
STR rndBrgVersion	1.3.6.1.4.1.89.2.4	DisplayString	read-only	The bridge version.
rndBridgeAlarm	1.3.6.1.4.1.89.2.3
INT rndBridgeType	1.3.6.1.4.1.89.2.1	INTEGER	read-only	Identification of the RND bridge type.
INT rndCommunityAccess	1.3.6.1.4.1.89.2.7.2.1.3	INTEGER	read-write	The allowed access to this management station
rndCommunityEntry	1.3.6.1.4.1.89.2.7.2.1		not-accessible	The row definition for this table.
IP rndCommunityMngStationAddr	1.3.6.1.4.1.89.2.7.2.1.1	IpAddress	read-write	The management station that will be allowed to communicate with the agent IP address
INT rndCommunityStatus	1.3.6.1.4.1.89.2.7.2.1.5	INTEGER	read-write	The status of this entry. If the status is invalid the community entry will be deleted
STR rndCommunityString	1.3.6.1.4.1.89.2.7.2.1.2	DisplayString	read-write	The community string with which the management station will communicate with the agent
rndCommunityTable	1.3.6.1.4.1.89.2.7.2		not-accessible	The community table of the agent
INT rndCommunityTrapsEnable	1.3.6.1.4.1.89.2.7.2.1.4	INTEGER	read-write	Should the agent send traps to the management station
STR rndDefaultLogFile	1.3.6.1.4.1.89.35.2.3.1.5	DisplayString	read-write	The default file path of the log-file which will contain the polling results for the monitored element. If no other file path is specifically assigned to the monitored object instance, this log-file will be used.
INT rndDefaultPollingInterval	1.3.6.1.4.1.89.35.2.3.1.4	INTEGER	read-write	The default period of time between two consecutive pollings of the monitored element for the value of an object instance. If no other polling interval is specifically assigned to the monitored object instance, this one will be used
ROW rndDeleteValueEntryStatus	1.3.6.1.4.1.89.35.2.8.1.4	RowStatus	read-write	It is used to delete an entry from this table.
rndDeleteValuesEntry	1.3.6.1.4.1.89.35.2.8.1		not-accessible	The row definition for the rndDeleteValuesTable table.
rndDeleteValuesTable	1.3.6.1.4.1.89.35.2.8		not-accessible	This table indicates which MIB variables are row status fields which control the status of the entry to which they belong. This table also indicates which (integer!) value of these MIB variables will cause, if present in a SNMP SET PDU, the deletion of the conceptual row instance to which the SET MIB variable instance belongs.
rndDeviceParams	1.3.6.1.4.1.89.2
INT rndDuplexMode	1.3.6.1.4.1.89.4.1.1.18	INTEGER	read-write	This variable indicates whether this interface operates in half duplex full duplex or auto negotiation mode.
INT rndEraseSimulatedConfiguration	1.3.6.1.4.1.89.35.2.7	INTEGER	read-write	eraseSimulatedConfiguration instructs the MLNMS to erase all the simulated configuration from its configuration data-base (CDB). This the only accepted value for SNMP SET statements and will never be returned in SNMP GET statements. simulatedConfigurationPresent indicates that the MLNMS currently has a simulated configuration. simulatedConfigurationErased indicates that the MLNMS currently has no simulated configuration.
STR rndErrorDesc	1.3.6.1.4.1.89.2.3.1	DisplayString	read-only	A textual description of the enterprise-specific trap sent to the Network Management Station by the RND managed device.
INT rndErrorSeverity	1.3.6.1.4.1.89.2.3.2	INTEGER	read-only	The severity type of the enterprise-specific trap sent to the Network Management Station by the RND managed device.
rndFACS	1.3.6.1.4.1.89.16
rndFACSActEntry	1.3.6.1.4.1.89.16.2.1		not-accessible	Each rndFACSActEntry consist of the following parameters
INT rndFACSActIfIndex	1.3.6.1.4.1.89.16.2.1.2	INTEGER	read-only	The interface to which this FACS entry is applicable.
INT rndFACSAction	1.3.6.1.4.1.89.16.2.1.3	INTEGER	read-write	The management station that sends a SET request for one of these actions with indexes rndFACSType and rndFACSIfIndex defines the type and the interface Id for which all FACS statements are to be erased. If no interface or no type is specified, all FACS statements for a protocol are erased.
rndFACSActTable	1.3.6.1.4.1.89.16.2		not-accessible	The table of FACS action.
INT rndFACSActType	1.3.6.1.4.1.89.16.2.1.1	INTEGER	read-only	This parameter indicate on which FACS Table the FACS action will preform.
INT rndFACSDefaultAction	1.3.6.1.4.1.89.16.1	INTEGER	read-write	Used to define the default action for the device, when no FACS statements applicable to a given frame are defined.
OCT rndFACSDesAdd	1.3.6.1.4.1.89.16.3.1.7	OCTET STRING	read-write	Destination-address The size of the octet string will be according to the protocol type define in rndFACSProtocolType .
OCT rndFACSDesAddMask	1.3.6.1.4.1.89.16.3.1.8	OCTET STRING	read-write	Destination-address mask .
rndFACSEntry	1.3.6.1.4.1.89.16.3.1		not-accessible	Each FACS statment consist of the following parameters
INT rndFACSIfIndex	1.3.6.1.4.1.89.16.3.1.1	INTEGER	read-only	The interface to which this FACS entry is applicable.
INT rndFACSIndex	1.3.6.1.4.1.89.16.3.1.4	INTEGER	read-only	Index to the FACS Table.
INT rndFACSMask1Id	1.3.6.1.4.1.89.16.3.1.12	INTEGER	read-write	Index into RND mask table FACS/COD Type) .
INT rndFACSMask2Id	1.3.6.1.4.1.89.16.3.1.13	INTEGER	read-write	Index into RND mask table FACS/COD according to the value of rndFACSType .
INT rndFACSNetFiltering	1.3.6.1.4.1.89.16.3.1.10	INTEGER	read-write	... .
INT rndFACSOperation	1.3.6.1.4.1.89.16.3.1.9	INTEGER	read-write	... .
INT rndFACSProtocolType	1.3.6.1.4.1.89.16.3.1.2	INTEGER	read-only	This parameter define the protocol the Security Access Control is applicable.
INT rndFACSSoketNum	1.3.6.1.4.1.89.16.3.1.11	INTEGER	read-write	Port/socket number for different applications 0 is default meaning not applicable.
OCT rndFACSSrcAdd	1.3.6.1.4.1.89.16.3.1.5	OCTET STRING	read-write	The size of the octet string will be according to the protocol type define in rndFACSProtocolType.
OCT rndFACSSrcAddMask	1.3.6.1.4.1.89.16.3.1.6	OCTET STRING	read-write	Source-address mask .
INT rndFACSStatus	1.3.6.1.4.1.89.16.3.1.14	INTEGER	read-write	The status of a table entry.
rndFACSTable	1.3.6.1.4.1.89.16.3		not-accessible	The table of FACS statment.
INT rndFACSType	1.3.6.1.4.1.89.16.3.1.3	INTEGER	read-only	The Mode of in which this FACS statement operates.
OCT rndFileName	1.3.6.1.4.1.89.1.3	OCTET STRING	read-write	The name of the file used internally by RND for transferring tables maintained by network devices, using a prorietary File exchange protocol.
T/F rndHardwareConfiguration	1.3.6.1.4.1.89.35.2.6	TruthValue	read-write	Indicates whether the current SET SNMP PDU contains hardware configuration (i.e., normally read-only variables). SET of such variables in the Mid-level management station will be allowed only if this variable is included in the SNMP PDU and its value is true. Its value as returned in a GET SNMP PDU will always be false.
INT rndHighPriorityIf	1.3.6.1.4.1.89.4.1.1.16	INTEGER	read-write	This variable indicates whether this interface will forward pakages that fit HighPriority set by the manager.
INT rndICMPTransmitionEnable	1.3.6.1.4.1.89.2.7.1	INTEGER	read-write	This variable controlls the ability to transmit ICMP frames
INT rndIfBaudRate	1.3.6.1.4.1.89.4.1.1.6	INTEGER	read-write	Defines the baud rate of use by the interface. The valid rates are determined by the type of the media for which this baud rate is defined.
INT rndIfBoardNum	1.3.6.1.4.1.89.4.1.1.2	INTEGER	read-only	The interface defined by this entry correspTnds to the board defined by the same value of rndSlotBoardNum in the rndSlotTab.
INT rndIfBridge	1.3.6.1.4.1.89.4.1.1.15	INTEGER	read-write	This variable indicates whether this interface forward Layer II pakages.
INT rndIfChannelType	1.3.6.1.4.1.89.4.1.1.14	INTEGER	read-write	The type of the WAN channel
INT rndIfClockType	1.3.6.1.4.1.89.4.1.1.5	INTEGER	read-write	rndIfClockType defines the type of clock each interface uses: internal or external.
INT rndIfCompression	1.3.6.1.4.1.89.4.1.1.8	INTEGER	read-write	Defines whether data compression is enabled or disabled for the interface.
INT rndIfCompressionRate	1.3.6.1.4.1.89.4.1.1.10	INTEGER	read-only	Percentage of compression. This variable applies only if rndCompressionStatus is active.
INT rndIfCompressionStatus	1.3.6.1.4.1.89.4.1.1.9	INTEGER	read-only	Defines the status of the compression component: not-inserted - Compression component is not in the device active - Compression is enabled and operates correctly not-active - Compression is enables but does not operate. The reason may be that there is no compression component on the device connected to this interface. disabled - Compression was disabled by management, using variable rndCompression.
INT rndIfCompressionType	1.3.6.1.4.1.89.4.1.1.12	INTEGER	read-only	This parameter indicates the type of compression option available in the device. none(1) - indicates that there is no compression option in the device lowSpeed(2) - indicates a compression option which is operational up to line speed sof 64 kbps. highSpeed(3)- indicates a compression option which is operational up to line speeds of 2 Mbps.
INT rndIfCost	1.3.6.1.4.1.89.4.1.1.7	INTEGER	read-write	This variable assigns a transmission cost to the interface (channel or LAN). These costs are used in Level II routing. The costs aretypically inversly proportional to the channel quality.
rndIfEntry	1.3.6.1.4.1.89.4.1.1		not-accessible	The row definition for this table.
INT rndIfFilterMode	1.3.6.1.4.1.89.4.1.1.13	INTEGER	read-write	This parameter indicates the type of filtering in the device.
INT rndIfIndex	1.3.6.1.4.1.89.4.1.1.1	INTEGER	read-only	Index to the RND Interface Table. The interface defined by a particular value of this index is the same interface as identified by the same value of ifIndex (MIBII).
INT rndIfLATCompression	1.3.6.1.4.1.89.4.1.1.11	INTEGER	read-write	Enable/Disable the LAT Compression.
IP rndIfNetAddress	1.3.6.1.4.1.89.4.1.1.3	IpAddress	read-only	The IP address of the interface defined by the particular value of rndIfIndex.
INT rndIfStatus	1.3.6.1.4.1.89.4.1.1.4	INTEGER	read-only	The current status of the interface.
rndIfTable	1.3.6.1.4.1.89.4.1		not-accessible	RND-specific interface table. Each table entry includes an index, Board number, Network Address, interface status, clock indicator and interface cost.
INT rndInactiveArpTimeOut	1.3.6.1.4.1.89.2.2	INTEGER	read-write	This variable defines the maximum time period that can pass between ARP requests concerning an entry in the ARP table. After this time period, the entry is deleted from the table.
rndInterface	1.3.6.1.4.1.89.4
rndIpHost	1.3.6.1.4.1.89.2.7
rndIPX	1.3.6.1.4.1.89.12
STR rndManagedDate	1.3.6.1.4.1.89.2.9	DisplayString	read-write	The date will be sent in the format ddmmyyyy
STR rndManagedTime	1.3.6.1.4.1.89.2.8	DisplayString	read-write	The time will be sent in the format hhmmss
rndMibFileEntry	1.3.6.1.4.1.89.35.2.5.1		not-accessible	The row definition for this table.
ROW rndMibFileEntryStatus	1.3.6.1.4.1.89.35.2.5.1.4	RowStatus	read-write	It is used to manage the MIB files table.
INT rndMibFileIndex	1.3.6.1.4.1.89.35.2.5.1.1	INTEGER	read-only	The number of the MIB file in the list MIB files supported by the Mid-Level management station. The order of the MIB files in this list must reflect the the IMPORT relation between the MIBS contained in the MIB files, i.e., if MIB A IMPORTS FROM MIB B, the file containing MIB A must have a lesser index in this table than the file containing MIB B.
STR rndMibFilePath	1.3.6.1.4.1.89.35.2.5.1.2	DisplayString	read-write	The path of the MIB file in the MIB file server.
INT rndMibFileRefresh	1.3.6.1.4.1.89.35.2.5.1.3	INTEGER	read-write	Indicates if the file should be fetched after setting this entry from the MIB file server.
rndMibFilesTable	1.3.6.1.4.1.89.35.2.5		not-accessible	The table of monitored object instances. Each monitored object instance belongs to a monitored element previously entered in the rndMonitoredElementsTable.
rndMidLevelManagement	1.3.6.1.4.1.89.35.2
rndMng	1.3.6.1.4.1.89.1
STR rndMonitoredElement	1.3.6.1.4.1.89.35.2.4.1.1	DisplayString	read-only	A label assigned by the network manager to a monitored element to which this monitored object instance belongs. This label must have been previously entered in an instance of rndMonitoredElementLabel
IP rndMonitoredElementAddress	1.3.6.1.4.1.89.35.2.3.1.1	IpAddress	read-only	The IP address of the monitored element
STR rndMonitoredElementCommunity	1.3.6.1.4.1.89.35.2.3.1.2	DisplayString	read-write	The community of the monitored element
rndMonitoredElementEntry	1.3.6.1.4.1.89.35.2.3.1		not-accessible	The row definition for this table.
STR rndMonitoredElementLabel	1.3.6.1.4.1.89.35.2.3.1.3	DisplayString	read-write	The label assigned by the network manager to the monitored element
rndMonitoredElementsTable	1.3.6.1.4.1.89.35.2.3		not-accessible	The table of monitored elements of the network
ROW rndMonitoredElementStatus	1.3.6.1.4.1.89.35.2.3.1.6	RowStatus	read-write	It is used to manage the monitored elements table and indicates the current monitoring status of an element.
OID rndMonitoredObjectIdentifier	1.3.6.1.4.1.89.35.2.4.1.4	OBJECT IDENTIFIER	read-write	The object identifier of the object to which the monitored object instance belongs. An instance of rndMonitoredObjectIdentifier need not be assigned any value, if the corresponding instance of rndMonitoredObjectName is assigned a value, since any one of these, together with the object instance identifier, suffices to unambigously identify the monitored object instance.
OID rndMonitoredObjectInstance	1.3.6.1.4.1.89.35.2.4.1.5	OBJECT IDENTIFIER	read-write	The instance identifier (key) of the monitored object instance.
STR rndMonitoredObjectInstanceLabel	1.3.6.1.4.1.89.35.2.4.1.2	DisplayString	read-only	The label assigned by the network manager to the monitored object instance
STR rndMonitoredObjectName	1.3.6.1.4.1.89.35.2.4.1.3	DisplayString	read-write	The symbolic object type name of the object to which the monitored object instance belongs (as it appears the MIB module definition). In case of ambiguity the : format should be used. An instance of rndMonitoredObjectName need not be assigned any value, if the corresponding instance of rndMonitoredObjectIdentifier is assigned a value, since any one of these, together with the object instance identifier, suffices to unambigously identify the monitored object instance.
INT rndMonitoredObjectSyntax	1.3.6.1.4.1.89.35.2.4.1.6	INTEGER	read-write	The syntax of the monitored object instance (i.e., the syntax of the object type of the object to which the monitored instance belongs). Need not be assigned any value if the corresponding instance of rndMonitoredObjectName has been assigned a value
rndMonitoringEntry	1.3.6.1.4.1.89.35.2.4.1		not-accessible	The row definition for this table.
ROW rndMonitoringEntryStatus	1.3.6.1.4.1.89.35.2.4.1.11	RowStatus	read-write	It is used to manage the monitored object instances table and indicates the current monitoring status of an object instance.
INT rndMonitoringInterval	1.3.6.1.4.1.89.35.2.4.1.7	INTEGER	read-write	The period of time between two consecutive retrievals of the monitored object instance's value.
STR rndMonitoringLogfile	1.3.6.1.4.1.89.35.2.4.1.10	DisplayString	read-write	The entire path of the file in which the results of the monitoring of this object instance should be recorded.
rndMonitoringTable	1.3.6.1.4.1.89.35.2.4		not-accessible	The table of monitored object instances. Each monitored object instance belongs to a monitored element previously entered in the rndMonitoredElementsTable.
INT rndRowDeleteValue	1.3.6.1.4.1.89.35.2.8.1.3	INTEGER	read-write	The value of the variable identified by rndRowStatusVariableName and/or rndRowStatusObjectId, which, if present in a SNMP SET PDU, will cause the deletion of the conceptual row instance which the SET MIB variable instance belongs.
OID rndRowStatusObjectId	1.3.6.1.4.1.89.35.2.8.1.2	OBJECT IDENTIFIER	read-write	The object id of the row status field. If the rndRowStatusVariableName is a name present in the MIBs loaded into the MLNMS, this MIB variable is not required, but if given, it must match the object id known to the MLNMS. The variable identified by rndRowStatusVariableName and/or rndRowStatusObjectId must be a read-write MIB variable of type INTEGER which belongs to an entry (i.e, is a child of a MIB variable of type SEQUENCE).
STR rndRowStatusVariableName	1.3.6.1.4.1.89.35.2.8.1.1	DisplayString	read-write	The name of the row status field. This name may not necessarily be any name which is present in the MIBs loaded into the MLNMS station.
INT rndSysId	1.3.6.1.4.1.89.1.1	INTEGER	read-only	Identification of an RND device. The device type for each integer clarifies the sysObjectID in MIB - II.
INT rndWanHeader	1.3.6.1.4.1.89.4.1.1.17	INTEGER	read-write	This variable indicates the RND WAN header type used for frames which pass through this interface. 'regular' specifies a 14 bytes header compatible with older OG versions and 'short' a 4 byte header compatible with the RND adapter product family.
NTF routeTableOverflow	1.3.6.1.4.1.89.0.5			An overflow condition has occurred in the Routing Table. The Routing Table is used for IP routing algorithm (RIP).
INT rsArpDeleteTable	1.3.6.1.4.1.89.26.4.1	INTEGER	read-write	Setting this object to any not-null value has the effect of deleting all entries of the ARP table.
INT rsArpInactiveTimeOut	1.3.6.1.4.1.89.26.4.2	INTEGER	read-write	This variable defines the maximum time period (in second) that can pass between ARP requests concerning an entry in the ARP table. After this time period, the entry is deleted from the table.
INT rsArpProxy	1.3.6.1.4.1.89.26.4.3	INTEGER	read-write	When ARP Proxy is enabled, the router can respond to ARP requests for nodes located on a different sub-net, provided they are it its network table. The router responds with its own MAC address. When ARP Proxy is disabled, the router responds only to ARP requests for its own IP addresses.
INT rsAuthenticationMethod	1.3.6.1.4.1.89.35.1.83.7	INTEGER	read-write	Radius authentication method.
rsBWM	1.3.6.1.4.1.89.35.1.60
rsCCK	1.3.6.1.4.1.89.35.1.79
rsConf	1.3.6.1.4.1.89.28
INT rsConfigurationIdentifier	1.3.6.1.4.1.89.35.1.48	INTEGER	read-only	An administratively-assigned value that identifies managed device configuration.
INT rsConfirmMessagTab	1.3.6.1.4.1.89.29.5	INTEGER	read-write	This variable enables the operator to confirm all the message in the event Message Table.
rsCP	1.3.6.1.4.1.89.35.1.75
rsCSD	1.3.6.1.4.1.89.35.1.39
INT rsDbgLevel	1.3.6.1.4.1.89.29.3	INTEGER	read-write	This variable indicates the debug level the Router Server works. the range of this variable is 1..100
STR rsDiagnostic	1.3.6.1.4.1.89.29.4	DisplayString	read-only	This variable will contain some dignostic information in case on a problem ocurs in the RS functinality.
INT rsErrMailEnable	1.3.6.1.4.1.89.35.1.67.1	INTEGER	read-write	Send email on errors enable
IP rsErrMailGateway	1.3.6.1.4.1.89.35.1.67.2	IpAddress	read-write	primary SMTP gateway for error mail
rsErrMailParams	1.3.6.1.4.1.89.35.1.67
STR rsErrMailSrcAddress	1.3.6.1.4.1.89.35.1.67.3	DisplayString	read-write	source address to be used by device for outgoing mail
IP rsFileServerAddress	1.3.6.1.4.1.89.26.5.6	IpAddress	read-write	The IP address of the configuration / sw server.
STR rsGetConfigFile	1.3.6.1.4.1.89.26.5.4	DisplayString	read-write	The file name include path where the Router Server will get the configuration. The default source address will be the sender address.
INT rsHighPriority	1.3.6.1.4.1.89.29.1	INTEGER	read-write	This variable indicates the time interval the forwarding task inside the RS works in High Priority Mode.
INT rsIcmpGenErrMsgEnable	1.3.6.1.4.1.89.26.2.1	INTEGER	read-write	This variable controlls the ability to generate ICMP error messages
INT rsIcmpRdAdvertise	1.3.6.1.4.1.89.26.2.2.1.6	INTEGER	read-write	A flag indicating whether or not the address is to be advertised.
INT rsIcmpRdAdvertLifetime	1.3.6.1.4.1.89.26.2.2.1.5	INTEGER	read-write	The maximum length of time that the advertised addresses are to be considered as valid. Must be no less than rsIcmpRdMaxAdvertInterval and no greater than 9000 seconds. Default: 3 * rsIcmpRdMaxAdvertInterval.
rsIcmpRdEntry	1.3.6.1.4.1.89.26.2.2.1		not-accessible	The ICMP parameters configurated for IP interface.
INT rsIcmpRdEntStatus	1.3.6.1.4.1.89.26.2.2.1.8	INTEGER	read-write	Setting of any value to this object set values of all fields to the default values.
IP rsIcmpRdIpAddr	1.3.6.1.4.1.89.26.2.2.1.1	IpAddress	read-only	The IP address to which this entry's information pertains.
IP rsIcmpRdIpAdvertAddr	1.3.6.1.4.1.89.26.2.2.1.2	IpAddress	read-write	The IP destination address to be used for multicast Router Advertisements sent from the interface. The only permissible values are the all-systems multicast address, 224.0.0.1, or the limited-broadcast address, 255.255.255.255.
INT rsIcmpRdMaxAdvertInterval	1.3.6.1.4.1.89.26.2.2.1.3	INTEGER	read-write	The maximum time allowed between sending multicast Router Advertisements from the interface, in seconds. Must be no less than 4 seconds and no greater than 1800 seconds.
INT rsIcmpRdMinAdvertInterval	1.3.6.1.4.1.89.26.2.2.1.4	INTEGER	read-write	The minimum time allowed between sending unsolicited multicast Router Advertisements from the interface, in seconds. Must be no less than 3 seconds and no greater than rsIcmpRdMaxAdvertInterval. Default: 0.75 * rsIcmpRdMaxAdvertInterval.
INT rsIcmpRdPreferenceLevel	1.3.6.1.4.1.89.26.2.2.1.7	INTEGER	read-write	The preferability of the address as a default router address, relative to other router addresses on the same subnet.
rsIcmpRdTable	1.3.6.1.4.1.89.26.2.2		not-accessible	This table contains ICMP Router Discovery parameters configurated per IP interface.
rsIDS	1.3.6.1.4.1.89.35.1.65
INT rsIfAutoNegotiate	1.3.6.1.4.1.89.35.1.84.1.4	INTEGER	read-write	interface's autonegotiation status
rsIfConfEntry	1.3.6.1.4.1.89.28.1.1		not-accessible	Each entry defines a configured interface.
INT rsIfConfIndex	1.3.6.1.4.1.89.28.1.1.1	INTEGER	read-only	This variable uniquely identifies the interface. It is used as a cross reference in other system tables
STR rsIfConfName	1.3.6.1.4.1.89.28.1.1.3	DisplayString	read-write	This variable provides a logical name to a specific entry in rsIfConfTable
ROW rsIfConfStatus	1.3.6.1.4.1.89.28.1.1.4	RowStatus	read-write	The status of the ConfigEntry. The choices are those defined in SNMPv2-TC. Only: active, createAndWait, and destroy will be used. active - The conceptual row is available for use by the managed device. createAndWait - A new instance of a conceptual row is desired, but not to have it available for use by the managed device. destroy - Delete all instances associated with an existing conceptual row.
rsIfConfTable	1.3.6.1.4.1.89.28.1		not-accessible	This table enable the user to add interface to the RS. RS will automatically add the new interface to the interface Table
RSI rsIfConfType	1.3.6.1.4.1.89.28.1.1.2	RsIfType	read-write	This variable identifies the type of the specific entry in the rsIfConfTable. This field is writable only at creation time (i.e., when value of status is underCreation).
INT rsIfDuplex	1.3.6.1.4.1.89.35.1.84.1.3	INTEGER	read-write	interface's duplex
rsIfEntry	1.3.6.1.4.1.89.35.1.84.1		not-accessible	The row definition for this table
INT rsIfIndex	1.3.6.1.4.1.89.35.1.84.1.1	INTEGER	read-only	interface's index
ROW rsIfRowStatus	1.3.6.1.4.1.89.35.1.84.1.5	RowStatus	read-write	interface's rowstatus
INT rsIfSpeed	1.3.6.1.4.1.89.35.1.84.1.2	INTEGER	read-write	interface's speed
rsIfTable	1.3.6.1.4.1.89.35.1.84		not-accessible	Device physical interface table
rsIpAddrEntry	1.3.6.1.4.1.89.26.1.1		not-accessible	The addressing information for one of this entity's IP addresses.
rsIpAddrTable	1.3.6.1.4.1.89.26.1		not-accessible	This table is parralel to MIB II IpAddrTable, and is used to add/delete entries to/from that table. In addition it contains private objects.
IP rsIpAdEntAddr	1.3.6.1.4.1.89.26.1.1.1	IpAddress	read-only	The IP address to which this entry's addressing information pertains.
INT rsIpAdEntBcastAddr	1.3.6.1.4.1.89.26.1.1.7	INTEGER	read-write	Indicates how the host part of ip subnet broadcast messages will be filled: 0 - host part will be filled by 0 1 - host part will be filled by 1.
INT rsIpAdEntForwardIpBroadcast	1.3.6.1.4.1.89.26.1.1.4	INTEGER	read-write	This variable controls forwarding of IP (sub)net-directed broadcasts destined for an attached sub(net).
INT rsIpAdEntIfIndex	1.3.6.1.4.1.89.26.1.1.2	INTEGER	read-write	The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
IP rsIpAdEntNetMask	1.3.6.1.4.1.89.26.1.1.3	IpAddress	read-write	The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
INT rsIpAdEntReasmMaxSize	1.3.6.1.4.1.89.26.1.1.5	INTEGER	read-only	The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.
INT rsIpAdEntStatus	1.3.6.1.4.1.89.26.1.1.6	INTEGER	read-write	The validity of this entry. Invalid indicates that this entry is invalid in IpAddrTable (MIB II).
INT rsIpAdEntVlanTag	1.3.6.1.4.1.89.26.1.1.8	INTEGER	read-write	The vlan Tag value that represent this ip interface this filed include both vlna tag and vlan priority
INT rsIpRipFilterGlbAction	1.3.6.1.4.1.89.26.8.1.1.7	INTEGER	read-write	Filter action - permit/deny for this network
rsIpRipFilterGlbEntry	1.3.6.1.4.1.89.26.8.1.1		not-accessible	An entry in the RIP global filter table
IP rsIpRipFilterGlbIpAddr	1.3.6.1.4.1.89.26.8.1.1.4	IpAddress	read-write	network prefix IP address, as in the forwarding table.
INT rsIpRipFilterGlbMatchBits	1.3.6.1.4.1.89.26.8.1.1.6	INTEGER	read-write	the number of bits to match in the Network IP address. A value smaller than 32 defines a wildcard. for example: the value 8 means all routes whose leftmost 8 bits are equal to those of the network IP address. If this variable has a value other than 32, than rsIpRipFilterGlbNetworkMaskBits must be 0 and is ignored.
INT rsIpRipFilterGlbNetworkMaskBits	1.3.6.1.4.1.89.26.8.1.1.5	INTEGER	read-write	the number of bits in the IP Network mask, called network-prefix-length in Router Requirements terminology. for example: the value 16 means mask 255.255.0.0
INT rsIpRipFilterGlbNumber	1.3.6.1.4.1.89.26.8.1.1.2	INTEGER	read-only	Number of RIP filter.
INT rsIpRipFilterGlbStatus	1.3.6.1.4.1.89.26.8.1.1.3	INTEGER	read-write	The validity of this entry. Setting this value to invalid deletes the entry, and the entry may be actualy removed from the table.
rsIpRipFilterGlbTable	1.3.6.1.4.1.89.26.8.1		not-accessible	The table of RIP global filters per IP router.
INT rsIpRipFilterGlbType	1.3.6.1.4.1.89.26.8.1.1.1	INTEGER	read-only	Type of filter - input/output
INT rsIpRipFilterLclAction	1.3.6.1.4.1.89.26.8.2.1.8	INTEGER	read-write	Filter action - permit/deny
rsIpRipFilterLclEntry	1.3.6.1.4.1.89.26.8.2.1		not-accessible	An entry in the Intf RIP filter table
IP rsIpRipFilterLclIpAddr	1.3.6.1.4.1.89.26.8.2.1.5	IpAddress	read-write	network prefix IP address, as in the forwarding table.
IP rsIpRipFilterLclIpIntf	1.3.6.1.4.1.89.26.8.2.1.1	IpAddress	read-only	The IP address identifying the RIP interface for this filter. This value corresponds to rsIpAdEntAddr.
INT rsIpRipFilterLclMatchBits	1.3.6.1.4.1.89.26.8.2.1.7	INTEGER	read-write	the number of bits to match in the Network IP address. A value smaller than 32 defines a wildcard. for example: the value 8 means all routes whose leftmost 8 bits are equal to those of the network IP address. If this variable has a value other than 32, than rsIpRipFilterLclNetworkMaskBits must be 0 and is ignored.
INT rsIpRipFilterLclNetworkMaskBits	1.3.6.1.4.1.89.26.8.2.1.6	INTEGER	read-write	the number of bits in the IP Network mask, called network-prefix-length in Router Requirements terminology. for example: the value 16 means mask 255.255.0.0
INT rsIpRipFilterLclNumber	1.3.6.1.4.1.89.26.8.2.1.3	INTEGER	read-only	Number of RIP filter for this Interface
INT rsIpRipFilterLclStatus	1.3.6.1.4.1.89.26.8.2.1.4	INTEGER	read-write	The validity of this entry. Setting this value to invalid deletes the entry, and the entry may be actualy removed from the table.
rsIpRipFilterLclTable	1.3.6.1.4.1.89.26.8.2		not-accessible	Table of input/output RIP filters used per IP Interface.
INT rsIpRipFilterLclType	1.3.6.1.4.1.89.26.8.2.1.2	INTEGER	read-only	Type of filter - input/output
rsIpZeroHopRouting	1.3.6.1.4.1.89.35.3
INT rsIpZhrAdminStatus	1.3.6.1.4.1.89.35.3.3.1.2	INTEGER	read-write	It is used to control whether ZHR will operate on the interface.
INT rsIpZhrAgingTimeout	1.3.6.1.4.1.89.35.3.2	INTEGER	read-write	This parameter controls the aging time-out in seconds of direct connections which were allocated. The virtual IP address of a direct connection whose time-out has expired is eligible for allocation to a different connection.
INT rsIpZhrConnectionAge	1.3.6.1.4.1.89.35.3.5.1.6	INTEGER	read-only	The age of the connection in seconds.
IP rsIpZhrConnectionDestIp	1.3.6.1.4.1.89.35.3.5.1.3	IpAddress	read-only	The destination IP Address of this direct connection.
rsIpZhrConnectionEntry	1.3.6.1.4.1.89.35.3.5.1		not-accessible	An entry in the ZHR Connection table
IP rsIpZhrConnectionIpIntf	1.3.6.1.4.1.89.35.3.5.1.1	IpAddress	read-only	The IP Interface for which this direct connection was established.
IP rsIpZhrConnectionSrcIp	1.3.6.1.4.1.89.35.3.5.1.2	IpAddress	read-only	The source IP Address of this direct connection.
rsIpZhrConnectionsTable	1.3.6.1.4.1.89.35.3.5		not-accessible	Table of the currently active direct connections.
NTF rsIpZhrConnectionsTableOverflow	1.3.6.1.4.1.89.0.70			The Zero Hop Routing connections Table has been overflown.
ROW rsIpZhrConnectionStatus	1.3.6.1.4.1.89.35.3.5.1.7	RowStatus	read-write	It is used to manage the connections table. The supported actions will be active, createAndGo and destroy.
INT rsIpZhrConnectionType	1.3.6.1.4.1.89.35.3.5.1.5	INTEGER	read-only	The type of this direct connection. dynamic - established by the RS. disabled - established by the RS. The RS detected that the virtual address is already used as destination by the source BEFORE its allocation, and therefore marked this connection as 'disabled' to prevent a future allocation of this virtual address to this source. static - established by user.
IP rsIpZhrConnectionVirtualIp	1.3.6.1.4.1.89.35.3.5.1.4	IpAddress	read-only	The virtual IP address allocated for this direct connection.
INT rsIpZhrGeneralStatus	1.3.6.1.4.1.89.35.3.1	INTEGER	read-write	This parameter enables or disables the IP Zero Hop Routing feature for all IP interfaces. The IP Zero Hop Routing feature can also be enabled or disabled on each IP interface through the rsIpZhrStatusTable.
NTF rsIpZhrNotAllocVirtualIp	1.3.6.1.4.1.89.0.73			The source IP address sent an ARP specifying a virtual IP which was not allocated for this source. This virtual IP will not be allocated to connections of this specific source IP.
NTF rsIpZhrReqStaticConnNotAccepted	1.3.6.1.4.1.89.0.71			The requested static connection was not accepted because there is no available IP virtual address to allocate to it.
rsIpZhrStatusEntry	1.3.6.1.4.1.89.35.3.3.1		not-accessible	An entry in the ZHR status table.
IP rsIpZhrStatusIpIntf	1.3.6.1.4.1.89.35.3.3.1.1	IpAddress	read-only	The Ip interface whose ZHR feature status is accessed.
rsIpZhrStatusTable	1.3.6.1.4.1.89.35.3.3		not-accessible	The administrative status of the ZHR feature per ip interface.
rsIpZhrVirtAddressEntry	1.3.6.1.4.1.89.35.3.4.1		not-accessible	An entry in the ZHR virtual IP addresses table
IP rsIpZhrVirtAddressFrom	1.3.6.1.4.1.89.35.3.4.1.3	IpAddress	read-write	The first free IP address in the block.
IP rsIpZhrVirtAddressIpIntf	1.3.6.1.4.1.89.35.3.4.1.1	IpAddress	read-only	The Ip Interface to which the IP addresses in this entry are allocated.
ROW rsIpZhrVirtAddressStatus	1.3.6.1.4.1.89.35.3.4.1.4	RowStatus	read-write	It is used to manage the virtual address table. The supported actions will be active, createAndGo and destroy.
rsIpZhrVirtAddressTable	1.3.6.1.4.1.89.35.3.4		not-accessible	The table of free virtual IP addresses which may be allocated to establish direct connections - Per IP Interface.
IP rsIpZhrVirtAddressTo	1.3.6.1.4.1.89.35.3.4.1.2	IpAddress	read-only	The last free IP address in the block.
NTF rsIpZhrVirtualIpAsSource	1.3.6.1.4.1.89.0.72			The virtual IP address appeared as a source IP. All the connections using it will be deleted and it will not be further allocated to new connections.
STR rsLoadSoftware	1.3.6.1.4.1.89.26.5.5	DisplayString	read-write	The file name include path where the Router Server will get the software. The source address will the sender address.
INT rsLowPriority	1.3.6.1.4.1.89.29.2	INTEGER	read-write	This variable indicates the time interval the forwarding task inside the RS works in Low Priority Mode.
INT rsMaxArpEntries	1.3.6.1.4.1.89.29.8.3.1	INTEGER	read-only	Maximal number of entries in Arp forwarding table.
INT rsMaxArpEntriesAfterReset	1.3.6.1.4.1.89.29.8.3.2	INTEGER	read-write	Future maximal number of entries in Arp forwarding table.
rsMaxArpEntriesTuning	1.3.6.1.4.1.89.29.8.3
INT rsMaxBrgFrwEntries	1.3.6.1.4.1.89.29.8.1.1	INTEGER	read-only	Maximal number of entries in bridge forwarding table.
INT rsMaxBrgFrwEntriesAfterReset	1.3.6.1.4.1.89.29.8.1.2	INTEGER	read-write	Future maximal number of entries in bridge forwarding table.
rsMaxBridgeForwardingEntriesTuning	1.3.6.1.4.1.89.29.8.1
INT rsMaxDspClntEntries	1.3.6.1.4.1.89.29.8.6.1	INTEGER	read-only	Maximal number of entries in rsSdClientsTable.
INT rsMaxDspClntEntriesAfterReset	1.3.6.1.4.1.89.29.8.6.2	INTEGER	read-write	Future maximal number of entries in rsSdClientsTable.
rsMaxDspClntEntriesTuning	1.3.6.1.4.1.89.29.8.6
INT rsMaxDspFrmEntries	1.3.6.1.4.1.89.29.8.8.1	INTEGER	read-only	Maximal number of entries in rsSdClientsTable.
INT rsMaxDspFrmEntriesAfterReset	1.3.6.1.4.1.89.29.8.8.2	INTEGER	read-write	Future maximal number of entries in rsSdClientsTable.
rsMaxDspFrmEntriesTuning	1.3.6.1.4.1.89.29.8.8
rsMaxEntriesTuning	1.3.6.1.4.1.89.29.8
rsMaxIpForwardingEntriesTuning	1.3.6.1.4.1.89.29.8.2
INT rsMaxIpFrwEntries	1.3.6.1.4.1.89.29.8.2.1	INTEGER	read-only	Maximal number of entries in Ip forwarding table.
INT rsMaxIpFrwEntriesAfterReset	1.3.6.1.4.1.89.29.8.2.2	INTEGER	read-write	Future maximal number of entries in Ip forwarding table.
rsMaxIpxForwardingEntriesTuning	1.3.6.1.4.1.89.29.8.4
INT rsMaxIpxFrwEntries	1.3.6.1.4.1.89.29.8.4.1	INTEGER	read-only	Maximal number of entries in Ipx forwarding table.
INT rsMaxIpxFrwEntriesAfterReset	1.3.6.1.4.1.89.29.8.4.2	INTEGER	read-write	Future maximal number of entries in Ipx forwarding table.
INT rsMaxIpxSapEntries	1.3.6.1.4.1.89.29.8.5.1	INTEGER	read-only	Maximal number of entries in IpxSap table.
INT rsMaxIpxSapEntriesAfterReset	1.3.6.1.4.1.89.29.8.5.2	INTEGER	read-write	Future maximal number of entries in IpxSap table.
rsMaxIpxSapEntriesTuning	1.3.6.1.4.1.89.29.8.5
INT rsMaxRoutingEntries	1.3.6.1.4.1.89.29.8.9.1	INTEGER	read-only	Maximal number of entries in the routing table.
INT rsMaxRoutingEntriesAfterReset	1.3.6.1.4.1.89.29.8.9.2	INTEGER	read-write	Future maximal number of entries in the routing table.
rsMaxRoutingEntriesTuning	1.3.6.1.4.1.89.29.8.9
rsMaxZeroHopRoutEntriesTuning	1.3.6.1.4.1.89.29.8.7
INT rsMaxZhrConns	1.3.6.1.4.1.89.29.8.7.1	INTEGER	read-only	The current maximal number of direct Zero-hop routing connections.
INT rsMaxZhrConnsAfterReset	1.3.6.1.4.1.89.29.8.7.2	INTEGER	read-write	The future (after reset) maximal number of direct Zero-hop routing connections.
rsMLB	1.3.6.1.4.1.89.35.1.38
INT rsNsdMode	1.3.6.1.4.1.89.35.1.22	INTEGER	read-write	The Topology chosen for the NSD. Slow mode keeps the servers behind the NSD. Fast mode uses retargeting to connect clients directly to servers.
IP rsNsdWINSAddr	1.3.6.1.4.1.89.35.1.23	IpAddress	read-write	NetBIOS Name Server IP Address.
rsNWSD	1.3.6.1.4.1.89.35.1.40
INT rsPhysPortMirrorActiveDstPort	1.3.6.1.4.1.89.35.1.74.1.9	INTEGER	read-only	The active dest-port at a certain time, if it is the dest-port or the backup-port or none of them.
INT rsPhysPortMirrorBackupDstPort	1.3.6.1.4.1.89.35.1.74.1.6	INTEGER	read-write	The destination port - the target sniffer port
INT rsPhysPortMirrorBackupStatus	1.3.6.1.4.1.89.35.1.74.1.8	INTEGER	read-only	The status of the backup-port according to the health check: Active - the port is ok and can be used as a destination port for copy-port PortDown - the port has been recognized as physically DOWN and therefore the traffic will not be copied to this port until it will be recognized as physically UP CheckIDSFail - the connectivty check of the monitoring port of the IDS failed and therefore the traffic will not be copied to this port until the check will recognize differently CheckIDSFailAnd PortDown - both the connectivty check on the IDS failed and the port has been recognized as physically DOWN None - for the case there is no defined backup port.
INT rsPhysPortMirrorDstPort	1.3.6.1.4.1.89.35.1.74.1.2	INTEGER	read-only	The destination port - the target sniffer port
INT rsPhysPortMirrorDstStatus	1.3.6.1.4.1.89.35.1.74.1.7	INTEGER	read-only	The status of the dest-port according to the health check: active - the port is ok and can be used as a destination port for copy-port portDown - the port has been recognized as physically DOWN and therefore the traffic will not be copied to this port until it will be recognized as physically UP checkIDSFail - the connectivty check of the monitoring port of the IDS failed and therefore the traffic will not be copied to this port until the check will recognize differently checkIDSFailAnd PortDown - both the connectivty check on the IDS failed and the port has been recognized as physically DOWN.
rsPhysPortMirrorEntry	1.3.6.1.4.1.89.35.1.74.1		not-accessible	The row definition for physical copy port table.
INT rsPhysPortMirrorRxBroadCast	1.3.6.1.4.1.89.35.1.74.1.4	INTEGER	read-write	The copy will include broadcast/unknown or not
INT rsPhysPortMirrorRxTx	1.3.6.1.4.1.89.35.1.74.1.3	INTEGER	read-write	Copy Rx/Tx traffic to the copy port .
INT rsPhysPortMirrorSrcInf	1.3.6.1.4.1.89.35.1.74.1.1	INTEGER	read-only	The port under sniffing
ROW rsPhysPortMirrorStatus	1.3.6.1.4.1.89.35.1.74.1.5	RowStatus	read-write	Used to delete an entry of this table.
rsPhysPortMirrorTable	1.3.6.1.4.1.89.35.1.74		not-accessible	Table containing the list of copy ports
INT rsPlatformIdentifier	1.3.6.1.4.1.89.35.1.47	INTEGER	read-only	An administratively-assigned value that identifies managed device platform.
IP rsRadiusBackupServerAddr	1.3.6.1.4.1.89.35.1.83.4	IpAddress	read-write	The IP Address of the backup radius server.
INT rsRadiusBackupServerPort	1.3.6.1.4.1.89.35.1.83.5	INTEGER	read-write	The port on which the radius backup server listens
STR rsRadiusBackupServerSecret	1.3.6.1.4.1.89.35.1.83.6	DisplayString	read-write	The key with which the user's password is encrypted.
IP rsRadiusMainServerAddr	1.3.6.1.4.1.89.35.1.83.1	IpAddress	read-write	The IP Address of the radius main server.
INT rsRadiusMainServerPort	1.3.6.1.4.1.89.35.1.83.2	INTEGER	read-write	The port on which the radius main server listens
STR rsRadiusMainServerSecret	1.3.6.1.4.1.89.35.1.83.3	DisplayString	read-write	The key with which the user's password is encrypted.
rsRadiusServer	1.3.6.1.4.1.89.35.1.83
INT rsRadiusServerRetries	1.3.6.1.4.1.89.35.1.83.9	INTEGER	read-write	Minimal number of unanswered request attempts before considering the radius server disconnected.
INT rsRadiusServerTimeout	1.3.6.1.4.1.89.35.1.83.8	INTEGER	read-write	Number of seconds to wait for reply from the radius server before retransmitting the request.
IP rsRip2IfConfAddress	1.3.6.1.4.1.89.26.3.1.1.1	IpAddress	read-only	The IP Address of this system on the indicated subnet.
INT rsRip2IfConfAutoSend	1.3.6.1.4.1.89.26.3.1.1.3	INTEGER	read-write	This variable controls RIP automatic send behavior. If enabled and no routers were heard on the interface, RIP will only send default route with high metric. Otherwise RIP will send updates according to configuration.
rsRip2IfConfEntry	1.3.6.1.4.1.89.26.3.1.1		not-accessible
rsRip2IfConfTable	1.3.6.1.4.1.89.26.3.1		not-accessible	This table is extension of rip2IfConfTable (RFC 1389 ,RIP 2)
INT rsRip2IfConfVirtualDis	1.3.6.1.4.1.89.26.3.1.1.2	INTEGER	read-write	This variable defines the virtual number of hops assigned to the interface specified by rsIfIpAddrIndex. This enables fine-tuning of the RIP routing algorithm.
INT rsRipEnable	1.3.6.1.4.1.89.26.9	INTEGER	read-write	Enables or disables RIP.
NTF rsSDclientsTableOverflow	1.3.6.1.4.1.89.0.68			This warning is generated when an overflow occurs in the clients table.
NTF rsSDinactiveServer	1.3.6.1.4.1.89.0.69			This warning is generated when a server does not respond to the dispatchers polling and is thought to be inactive.
STR rsSendConfigFile	1.3.6.1.4.1.89.26.5.3	DisplayString	read-write	The file name include path where the Router Server will put the full configuration. The default destination address will be the sender address.
rsServerDispatcher	1.3.6.1.4.1.89.35.1
NTF rsSnmpSetRequestInSpecialCfgState	1.3.6.1.4.1.89.0.74			An incoming SNMP SET request was rejected because no such requests (except action requests) are accepted after start of new configuration reception or during sending the current configuration to an NMS.
rsSSD	1.3.6.1.4.1.89.35.1.63
rsSSDvirtualLan	1.3.6.1.4.1.89.35.1.63.1
rsSSDvirtualLanEntry	1.3.6.1.4.1.89.35.1.63.1.1.1		not-accessible	A list of information for each virtual LAN.
rsSSDvirtualLanPortEntry	1.3.6.1.4.1.89.35.1.63.1.2.1		not-accessible	A entry of this table specifies a VL and a port belonging to it
rsSSDvirtualLanPortsTable	1.3.6.1.4.1.89.35.1.63.1.2		not-accessible	For each VL (a ifIndex with a type of propVirtual(53)) an entry of this table specifies a set of ports, which it contains.
rsSSDvirtualLanTable	1.3.6.1.4.1.89.35.1.63.1.1		not-accessible	An entry of this table specifies an new ifIndex with a type of propVirtual(53).
T/F rsSSDvlAutoConfigEnable	1.3.6.1.4.1.89.35.1.63.1.1.1.3	TruthValue	read-write	It is used only in the case of IP. The meanings of the values are: true(1): Autolearning is used for this VL false(2): Autolearning isn't used for this VL from ports, specified in the table virtualLanAutoConfTable.
INT rsSSDvLIfIndex	1.3.6.1.4.1.89.35.1.63.1.1.1.1	INTEGER	read-write	An logical interface number, corresponded this VL
INT rsSSDvLPortIfIndex	1.3.6.1.4.1.89.35.1.63.1.2.1.2	INTEGER	read-write	A physical port belonging to the VL specified by rsSSDvlIfIndex.
ROW rsSSDvLPortStatus	1.3.6.1.4.1.89.35.1.63.1.2.1.4	RowStatus	read-write	It is used to delete an entry
INT rsSSDvLPortTag	1.3.6.1.4.1.89.35.1.63.1.2.1.5	INTEGER	read-write	This variable indicate if the port is tagged or untagged
INT rsSSDvLPortType	1.3.6.1.4.1.89.35.1.63.1.2.1.3	INTEGER	read-only	static means configured by user dynamic means autoconfigured by the RS
INT rsSSDvlPriority	1.3.6.1.4.1.89.35.1.63.1.1.1.7	INTEGER	read-write	A user priority, used for this VLAN on tagged ports.
INT rsSSDvlProto	1.3.6.1.4.1.89.35.1.63.1.1.1.2	INTEGER	read-write	The protocol, supported by this VL. The meanings of the values are: other: none of the following. This VL includes any protocol except the following protocols. It is a bridging VL. RS relies on a third-party router to exchange traffic between nodes on different virtual LANs of this type. IP: This is a routing VL, RS will route between nodes on different virtual LANs. IPmulticast: RS will broadcast the message to all the VL's ports. Used for video-conferencing applications. ipxRaw: This is a Routing VL, RS will route between nodes on different virtual LANs. ipxET: This is a routing VL, RS will route between nodes on different virtual LANs. ipxLLC: This is a routing VL, RS will route between nodes on different virtual LANs. ipxSNAP: This is a routing VL, RS will route between nodes on different virtual LANs. decNET: This is a bridging VL, RS relies on a third-party router to exchange traffic between nodes on different DECnet virtual LANs of this type. netBios: This is a Bridging VL, RS relies on a third-party router to exchange traffic between nodes on different NetBIOS virtual LANs of this type. appleTalk: This is a bridging VL, RS relies on a third-party router to exchange traffic between nodes on different AppleTalk virtual LANs of this type. swVlan: This is a Bridging and routing VL (switch VL) , Bridging is done on the Hertz/Uhaul level , and the RS route between nodes on different virtual LANs and/or between nodes of the switch VL.
ROW rsSSDvlStatus	1.3.6.1.4.1.89.35.1.63.1.1.1.4	RowStatus	read-write	It is used to delete an entry
INT rsSSDvlTag	1.3.6.1.4.1.89.35.1.63.1.1.1.6	INTEGER	read-write	A VLAN tag, used for this VLAN on tagged ports. If it's 0, then a value of (rsSSDvlIfIndex-100000+1) is used
INT rsSSDvlType	1.3.6.1.4.1.89.35.1.63.1.1.1.5	INTEGER	read-write	regular - ordinary type specBroadcast - for switches that support VLANs as a set of ports and only as a broadcast domain: broadcast frames do not cross VLAN's bounders, but unicast frames may be transmitted between different VLANs. Permits passing of broadcast frames between Vgate's VLANs. specArpReq - for switches that support VLANs as a set of ports and only as a broadcast domain: broadcast frames do not cross VLAN's bounders, but unicast frames may be transmitted between different VLANs. Permits passing of ARP request frames between Vgate's VLANs. specBroadcastAndUnicast - for switches that support VLANs as a set of ports but no frame crosses VLAN's bounders. Permits passing of IP/ARP request broadcast and IP unicast frames between Vgate's VLANs. specArpReqAndUnicast - for switches that support VLANs as a set of ports but no frame crosses VLAN's bounders. Permits passing of ARP request broadcast and IP unicast frames between Vgate's VLANs. This type can be used only for IP VLANs. specSwitch - for switches that support VLANs as a set of ports. This VLAN type is for switching when packets do not have to get to the cpu except when an IP interface defined on the VLAN. In Switch VLAN the cpu don't interfere in the bridging action this is done on the Herzts level (L2).
rsStatistics	1.3.6.1.4.1.89.35.1.73
INT rsSWPasswordStatus	1.3.6.1.4.1.89.35.1.49	INTEGER	read-write	Software download password status.
INT rsTftpRetryTimeOut	1.3.6.1.4.1.89.26.5.1	INTEGER	read-write	General Retransmission time-out value (seconds)
INT rsTftpTotalTimeOut	1.3.6.1.4.1.89.26.5.2	INTEGER	read-write	Total Retransmission time-out value (seconds)
rsTunning	1.3.6.1.4.1.89.29
rsVWSD	1.3.6.1.4.1.89.35.1.76
OCT rsVWSDDataItems	1.3.6.1.4.1.89.35.1.76.1.1.3	OCTET STRING	read-only	The Value(s) of the index column for the data item to which permission is set.
rsVWSDDataPermissionsTable	1.3.6.1.4.1.89.35.1.76.1		not-accessible	Table containing the list of data items to which Farm administrators of the virtual wsd has permissions.
rsVWSDDataPermissionsTableEntry	1.3.6.1.4.1.89.35.1.76.1.1		not-accessible	The row definition for this table.
ROW rsVWSDDataStatus	1.3.6.1.4.1.89.35.1.76.1.1.4	RowStatus	read-write	The row status for the table
OCT rsVWSDDataType	1.3.6.1.4.1.89.35.1.76.1.1.2	OCTET STRING	read-only	Holds a string that identifies the table of the index by which the data filtering is done.
STR rsVWSDUserGroup	1.3.6.1.4.1.89.35.1.76.1.1.1	DisplayString	read-only	The Group of users for whom data permission is given.
rsWSDApplicationMirrorEntry	1.3.6.1.4.1.89.35.1.45.1		not-accessible	The row definition for this table.
rsWSDApplicationMirrorTable	1.3.6.1.4.1.89.35.1.45		not-accessible	Table containing the list of active mirror entries.
STR rsWSDBuildNumber	1.3.6.1.4.1.89.35.1.56	DisplayString	read-only	Build number
NTF rsWSDCapacityLimitReached	1.3.6.1.4.1.89.35.1.0.5			This warning is generated when WSD capacity limit is reached.
INT rsWSDClientMirrorPercentage	1.3.6.1.4.1.89.35.1.42	INTEGER	read-write	The percent of client entries to back up.
INT rsWSDClientMirrorPollingTime	1.3.6.1.4.1.89.35.1.46	INTEGER	read-write	The polling time for sending the client entries.
NTF rsWSDConnectionLimitReached	1.3.6.1.4.1.89.35.1.0.1			This warning is generated when the users connection limit of an application or a physical server is reached.
INT rsWSDCriticalTrapFloodDelay	1.3.6.1.4.1.89.35.1.64.2	INTEGER	read-write	This variable defines how far (in seconds) will 2 Critical Warning Traps be spaced (of any type). Default = 20 seconds.
INT rsWSDDeviceOperationMode	1.3.6.1.4.1.89.35.1.85	INTEGER	read-write	Device operation mode: redirection (load balancing) or static forwarding (IDS, BWM).
INT rsWSDDNSResolution	1.3.6.1.4.1.89.35.1.31	INTEGER	read-write	Enable/Disable DNS resolution for Farm Addresses. In proximity mode, the WSD will give the best proximity address for the farm.
INT rsWSDDRAMSize	1.3.6.1.4.1.89.35.1.51	INTEGER	read-only	DRAM Size
INT rsWSDdummy11	1.3.6.1.4.1.89.35.1.45.2	INTEGER	read-only	Dummy variable for stopping getnext.
INT rsWSDdummy2	1.3.6.1.4.1.89.35.1.12.2	INTEGER	read-only	Dummy variable for stopping getnext.
INT rsWSDdummy5	1.3.6.1.4.1.89.35.1.16.2	INTEGER	read-only	Dummy variable for stopping getnext.
INT rsWSDdummy8	1.3.6.1.4.1.89.35.1.28.2	INTEGER	read-only	Dummy variable for stopping getnext.
INT rsWSDdummy9	1.3.6.1.4.1.89.35.1.29.2	INTEGER	read-only	Dummy variable for stopping getnext.
INT rsWSDDuplexMode	1.3.6.1.4.1.89.35.1.41.1.18	INTEGER	read-write	This variable indicates whether this interface operates in half duplex full duplex or auto negotiation mode.
INT rsWSDFlashSize	1.3.6.1.4.1.89.35.1.50	INTEGER	read-only	Flash Size
INT rsWSDHighPriorityIf	1.3.6.1.4.1.89.35.1.41.1.16	INTEGER	read-write	This variable indicates whether this interface will forward pakages that fit HighPriority set by the manager.
rsWSDHttpsParams	1.3.6.1.4.1.89.35.1.81
INT rsWSDHttpsPort	1.3.6.1.4.1.89.35.1.81.1	INTEGER	read-write	The Https Server Port.
INT rsWSDHttpsStatus	1.3.6.1.4.1.89.35.1.81.2	INTEGER	read-write	Https Status. Enable/Disable Https operation.
INT rsWSDIfBaudRate	1.3.6.1.4.1.89.35.1.41.1.6	INTEGER	read-write	Defines the baud rate of use by the interface. The valid rates are determined by the type of the media for which this baud rate is defined.
INT rsWSDIfBoardNum	1.3.6.1.4.1.89.35.1.41.1.2	INTEGER	read-only	The interface defined by this entry correspTnds to the board defined by the same value of rndSlotBoardNum in the rndSlotTab.
INT rsWSDIfBridge	1.3.6.1.4.1.89.35.1.41.1.15	INTEGER	read-write	This variable indicates whether this interface forward Layer II pakages.
INT rsWSDIfChannelType	1.3.6.1.4.1.89.35.1.41.1.14	INTEGER	read-write	The type of the WAN channel
INT rsWSDIfClockType	1.3.6.1.4.1.89.35.1.41.1.5	INTEGER	read-write	rsWSDIfClockType defines the type of clock each interface uses: internal or external.
INT rsWSDIfCompression	1.3.6.1.4.1.89.35.1.41.1.8	INTEGER	read-write	Defines whether data compression is enabled or disabled for the interface.
INT rsWSDIfCompressionRate	1.3.6.1.4.1.89.35.1.41.1.10	INTEGER	read-only	Percentage of compression. This variable applies only if rndCompressionStatus is active.
INT rsWSDIfCompressionStatus	1.3.6.1.4.1.89.35.1.41.1.9	INTEGER	read-only	Defines the status of the compression component: not-inserted - Compression component is not in the device active - Compression is enabled and operates correctly not-active - Compression is enables but does not operate. The reason may be that there is no compression component on the device connected to this interface. disabled - Compression was disabled by management, using variable rndCompression.
INT rsWSDIfCompressionType	1.3.6.1.4.1.89.35.1.41.1.12	INTEGER	read-only	This parameter indicates the type of compression option available in the device. none(1) - indicates that there is no compression option in the device lowSpeed(2) - indicates a compression option which is operational up to line speed sof 64 kbps. highSpeed(3)- indicates a compression option which is operational up to line speeds of 2 Mbps.
INT rsWSDIfCost	1.3.6.1.4.1.89.35.1.41.1.7	INTEGER	read-write	This variable assigns a transmission cost to the interface (channel or LAN). These costs are used in Level II routing. The costs aretypically inversly proportional to the channel quality.
rsWSDIfEntry	1.3.6.1.4.1.89.35.1.41.1		not-accessible	The row definition for this table.
INT rsWSDIfFilterMode	1.3.6.1.4.1.89.35.1.41.1.13	INTEGER	read-write	This parameter indicates the type of filtering in the device.
INT rsWSDIfIndex	1.3.6.1.4.1.89.35.1.41.1.1	INTEGER	read-only	Index to the RND Interface Table. The interface defined by a particular value of this index is the same interface as identified by the same value of ifIndex (MIBII).
INT rsWSDIfLATCompression	1.3.6.1.4.1.89.35.1.41.1.11	INTEGER	read-write	Enable/Disable the LAT Compression.
IP rsWSDIfNetAddress	1.3.6.1.4.1.89.35.1.41.1.3	IpAddress	read-only	The IP address of the interface defined by the particular value of rsWSDIfIndex.
INT rsWSDIfStatus	1.3.6.1.4.1.89.35.1.41.1.4	INTEGER	read-only	The current status of the interface.
rsWSDIfTable	1.3.6.1.4.1.89.35.1.41		not-accessible	RND-specific interface table. Each table entry includes an index, Board number, Network Address, interface status, clock indicator and interface cost.
NTF rsWSDIllegalReport	1.3.6.1.4.1.89.35.1.0.3			This warning is generated when an LRP message arrives with illegal information.
NTF rsWSDInternalTableOverflow	1.3.6.1.4.1.89.35.1.0.8			This warning is generated when there are no more free entries in the table.
NTF rsWSDIntrusionDetected	1.3.6.1.4.1.89.35.1.0.11			This informational trap is sent when an intrusion is detected.
STR rsWSDLicense	1.3.6.1.4.1.89.35.1.66	DisplayString	read-write	The new licence for the device
STR rsWSDLicenseID	1.3.6.1.4.1.89.35.1.70	DisplayString	read-only	License ID used for license downgrade
INT rsWSDManagementPorts	1.3.6.1.4.1.89.35.1.77	INTEGER	read-write	The entry indicates the functionality of the device. outOfPath implies that the device will be able to have a management port, and the rest of the ports will be used for sniffing. switch implies the regular functionality of the device (router or VLAN). promiscuous will have static port mappings for forwarding.
rsWSDManagementPortsEntry	1.3.6.1.4.1.89.35.1.78.1		not-accessible	The row definition for this table.
rsWSDManagementPortsTable	1.3.6.1.4.1.89.35.1.78		not-accessible	Table containing the operation of each port..
IP rsWSDMirrorActiveAddress	1.3.6.1.4.1.89.35.1.45.1.1	IpAddress	read-only	The IP address of the active device.
INT rsWSDMirrorActiveStatus	1.3.6.1.4.1.89.35.1.45.1.2	INTEGER	read-write	This variable indicates the administrative status of this entry. Used to delete an entry of this table.
INT rsWSDMirrorProtocolMode	1.3.6.1.4.1.89.35.1.44	INTEGER	read-write	Enable/Disable of the mirror protocol. That is whether to send the mirror messages.
INT rsWSDMirrorStatus	1.3.6.1.4.1.89.35.1.43	INTEGER	read-write	Enable/Disable mirroring. This enables the allocation of the mirror tables.
INT rsWSDNatStatus	1.3.6.1.4.1.89.35.1.35	INTEGER	read-write	Enable/Disable NAT - to hide the address of the server in messages send .
INT rsWSDNewEntryOnSourcePort	1.3.6.1.4.1.89.35.1.19	INTEGER	read-write	Check source port and if different open new client entry.
INT rsWSDNTAvResponseWeight	1.3.6.1.4.1.89.35.1.28.1.7	INTEGER	read-write	The weight for average response time.
rsWSDNTCheckEntry	1.3.6.1.4.1.89.35.1.28.1		not-accessible	The row definition for this table.
rsWSDNTCheckTable	1.3.6.1.4.1.89.35.1.28		not-accessible	In this table the WSD collects NT statistics per servers.
STR rsWSDNTCommunity	1.3.6.1.4.1.89.35.1.28.1.11	DisplayString	read-write	The SNMP community name with which we access the servers.
INT rsWSDNTFrequentCheckPeriod	1.3.6.1.4.1.89.35.1.28.1.2	INTEGER	read-write	The period for getting the frequent NT variables.
INT rsWSDNTIncomingTrafficWeight	1.3.6.1.4.1.89.35.1.28.1.4	INTEGER	read-write	The weight for incoming traffic consideration.
INT rsWSDNTOpenSessionsWeight	1.3.6.1.4.1.89.35.1.28.1.3	INTEGER	read-write	The weight for currently open sessions consideration.
INT rsWSDNTOutgoingTrafficWeight	1.3.6.1.4.1.89.35.1.28.1.5	INTEGER	read-write	The weight for outgoing traffic consideration.
rsWSDNTP	1.3.6.1.4.1.89.35.1.72
INT rsWSDNTPInterval	1.3.6.1.4.1.89.35.1.72.2	INTEGER	read-write	Time update interval.
INT rsWSDNTPPort	1.3.6.1.4.1.89.35.1.72.5	INTEGER	read-write	A UDP Port number.
IP rsWSDNTPServerAddr	1.3.6.1.4.1.89.35.1.72.1	IpAddress	read-write	Server IP address.
INT rsWSDNTPStatus	1.3.6.1.4.1.89.35.1.72.3	INTEGER	read-write	Enable status for NTP synchronization.
STR rsWSDNTPTimeZone	1.3.6.1.4.1.89.35.1.72.4	DisplayString	read-write	Offset from Greenwich time (format hh:mm).
INT rsWSDNTRegularCheckPeriod	1.3.6.1.4.1.89.35.1.28.1.6	INTEGER	read-write	The period for getting the regular NT variables.
INT rsWSDNTRetries	1.3.6.1.4.1.89.35.1.28.1.10	INTEGER	read-write	The number of retries before issuing a trap.
INT rsWSDNTSerialNum	1.3.6.1.4.1.89.35.1.28.1.1	INTEGER	read-only	The serial number of the algorithm.
INT rsWSDNTTCPLimitWeight	1.3.6.1.4.1.89.35.1.28.1.9	INTEGER	read-write	The weight for the TCP connections limit on the server.
INT rsWSDNTUsersLimitWeight	1.3.6.1.4.1.89.35.1.28.1.8	INTEGER	read-write	The weight for the users limit on the server.
NTF rsWSDPoliciesUpdated	1.3.6.1.4.1.89.35.1.0.10			This informational trap is sent when the rule policies are updated.
INT rsWSDPortIndex	1.3.6.1.4.1.89.35.1.78.1.1	INTEGER	read-only	The index of the physical ports.
INT rsWSDPortOperation	1.3.6.1.4.1.89.35.1.78.1.2	INTEGER	read-only	The operation of the particular port.
rsWSDPrivateCheckEntry	1.3.6.1.4.1.89.35.1.29.1		not-accessible	The row definition for this table.
rsWSDPrivateCheckTable	1.3.6.1.4.1.89.35.1.29		not-accessible	In this table the WSD collects private statistics per server.
STR rsWSDPrivateCommunity	1.3.6.1.4.1.89.35.1.29.1.8	DisplayString	read-write	The SNMP community name with which we access the servers.
OID rsWSDPrivateExtraVar1ID	1.3.6.1.4.1.89.35.1.29.1.3	OBJECT IDENTIFIER	read-write	This MIB variable will be retrieved from the server.
INT rsWSDPrivateExtraVar1Mode	1.3.6.1.4.1.89.35.1.29.1.9	INTEGER	read-write	Specify the type of parameter. Ascending means that the value of 100 is the best (Idle CPU percentage). Descending means that the value of 0 is the best (CPU utilization percentage)
INT rsWSDPrivateExtraVar1Weight	1.3.6.1.4.1.89.35.1.29.1.4	INTEGER	read-write	The weight for variable number 1.
OID rsWSDPrivateExtraVar2ID	1.3.6.1.4.1.89.35.1.29.1.5	OBJECT IDENTIFIER	read-write	This MIB variable will be retrieved from the server.
INT rsWSDPrivateExtraVar2Mode	1.3.6.1.4.1.89.35.1.29.1.10	INTEGER	read-write	Specify the type of parameter. Ascending means that the value of 100 is the best (Idle CPU percentage). Descending means that the value of 0 is the best (CPU utilization percentage)
INT rsWSDPrivateExtraVar2Weight	1.3.6.1.4.1.89.35.1.29.1.6	INTEGER	read-write	The weight for variable number 2.
INT rsWSDPrivateRetries	1.3.6.1.4.1.89.35.1.29.1.7	INTEGER	read-write	The number of retries before issuing a trap.
INT rsWSDPrivateSerialNum	1.3.6.1.4.1.89.35.1.29.1.1	INTEGER	read-only	The serial number of the algorithm.
INT rsWSDPrivateSpecialCheckPeriod	1.3.6.1.4.1.89.35.1.29.1.2	INTEGER	read-write	The period for getting the private variables.
NTF rsWSDReadyForShutDown	1.3.6.1.4.1.89.35.1.0.2			This warning is generated when all the clients sessions of an application or a physical server are finished and so, the application or server are ready to be shut down.
INT rsWSDRedundancyMode	1.3.6.1.4.1.89.35.1.21	INTEGER	read-write	Dose some WSD backup me.
NTF rsWSDRedundancySwitch	1.3.6.1.4.1.89.0.141			Whenever main server fails and backup takes over or server comes up after failure a trap of this type is issued.
INT rsWSDRedundancyTakeback	1.3.6.1.4.1.89.35.1.37	INTEGER	read-write	Whether to take the interfaces when coming up from redundancy failure automatically or wait for manual terminal command
NTF rsWSDRemoteWSDUnavailable	1.3.6.1.4.1.89.35.1.0.4			This warning is generated when a remote WSD is in full capacity, not in service or disabled. This server is then unavailable
INT rsWSDREResourceUtilization	1.3.6.1.4.1.89.35.1.55	INTEGER	read-only	Resource Utilization of network utilization
INT rsWSDResourceUtilization	1.3.6.1.4.1.89.35.1.53	INTEGER	read-only	Resource Utilization of WSD. Considers network utilization and internal CPU utilization
INT rsWSDRSResourceUtilization	1.3.6.1.4.1.89.35.1.54	INTEGER	read-only	Resource Utilization of internal CPU utilization
rsWSDSCProtcolsEntry	1.3.6.1.4.1.89.35.1.58.1.1		not-accessible	The row definition for protocol table.
rsWSDSCProtcolsTable	1.3.6.1.4.1.89.35.1.58.1		not-accessible	Table containing the list of ports/protocols for secured (encrypted) communication between the device and the management station or other device.
INT rsWSDSCProtocol	1.3.6.1.4.1.89.35.1.58.1.1.1	INTEGER	read-only	The protocol that should work in secured mode.
INT rsWSDSCProtocolStatus	1.3.6.1.4.1.89.35.1.58.1.1.2	INTEGER	read-write	The status (secured or not secured) of the protocol.
rsWSDSecuredComm	1.3.6.1.4.1.89.35.1.58
INT rsWSDSelectServerOnSourcePort	1.3.6.1.4.1.89.35.1.20	INTEGER	read-write	Check source port and if different select a new server.
INT rsWSDSendFakeArp	1.3.6.1.4.1.89.35.1.71	INTEGER	read-write	Controls whether a backup will send a fake ARP, advertising the main box's interfaces and VIPs, when the main box returns to service.
INT rsWSDSerStatAdminStatus	1.3.6.1.4.1.89.35.1.12.1.9	INTEGER	read-write	Enable / Shutdown all the applications on this physical server.
INT rsWSDSerStatAttUsersNum	1.3.6.1.4.1.89.35.1.12.1.2	INTEGER	read-only	The total number of currently active users attached to this server.
INT rsWSDSerStatConnectionLimit	1.3.6.1.4.1.89.35.1.12.1.8	INTEGER	read-write	The maximal number of client sessions which can be opened on this sever.
INT rsWSDSerStatConnectionLimitReached	1.3.6.1.4.1.89.35.1.12.1.10	INTEGER	read-only	Connection limit reached flag.
CTR rsWSDSerStatFramesLoad	1.3.6.1.4.1.89.35.1.12.1.5	Counter	read-only	Number of frames per second dispatched to server.
INT rsWSDSerStatFramesRate	1.3.6.1.4.1.89.35.1.12.1.4	INTEGER	read-only	Number of frames per second dispatched to server.
STR rsWSDSerStatName	1.3.6.1.4.1.89.35.1.12.1.1	DisplayString	read-only	This variable indicate the name assigned by the user to the serve.
INT rsWSDSerStatPeakLoad	1.3.6.1.4.1.89.35.1.12.1.3	INTEGER	read-only	Maximal number of frames per second dispatched to server since last reset.
INT rsWSDSerStatRecoveryTime	1.3.6.1.4.1.89.35.1.12.1.6	INTEGER	read-write	Number of seconds after server initialization during which ISD won't send any requests.
INT rsWSDSerStatWarmUpTime	1.3.6.1.4.1.89.35.1.12.1.7	INTEGER	read-write	Number of seconds after server recovery during which the server will get less requests than permitted by his weight and load.
rsWSDServerStatEntry	1.3.6.1.4.1.89.35.1.12.1		not-accessible	The row definition for this table.
rsWSDServerStatTable	1.3.6.1.4.1.89.35.1.12		not-accessible	In this table the WSD collects statistics per servers.
NTF rsWSDServerUp	1.3.6.1.4.1.89.35.1.0.9			This informational trap is sent when a server correctly responds to a connectivity check for the first time.
INT rsWSDSNMPPhysicalPortNumber	1.3.6.1.4.1.89.35.1.59.1.1	INTEGER	read-only	Physical port number.
INT rsWSDSNMPPhysicalPortState	1.3.6.1.4.1.89.35.1.59.1.2	INTEGER	read-write	enable - accept SNMP operations on the physical port. disable - ignore SNMP opertaions on the physical port.
rsWSDSNMPPortsEntry	1.3.6.1.4.1.89.35.1.59.1		not-accessible	Row definition for the table.
rsWSDSNMPPortsTable	1.3.6.1.4.1.89.35.1.59		not-accessible	The table contains all the physical ports. Each port can be set to allow/block SNMP operations to the device.
rsWSDSshParams	1.3.6.1.4.1.89.35.1.80
INT rsWSDSshPort	1.3.6.1.4.1.89.35.1.80.1	INTEGER	read-write	The SSH Server Port.
INT rsWSDSshStatus	1.3.6.1.4.1.89.35.1.80.2	INTEGER	read-write	SSH Status. Enable/Disable SSH operation.
INT rsWSDStaticDestinationPort	1.3.6.1.4.1.89.35.1.82.1.2	INTEGER	read-write	The destination port.
rsWSDStaticForwardingEntry	1.3.6.1.4.1.89.35.1.82.1		not-accessible	The row definition for this table.
rsWSDStaticForwardingTable	1.3.6.1.4.1.89.35.1.82		not-accessible	Table containing the static fowarding configration.
INT rsWSDStaticPortOperation	1.3.6.1.4.1.89.35.1.82.1.3	INTEGER	read-write	The operation for the specific port. process implies that the packets will be processed (analyzed, filtered etc.) prior to being forwarded. forward implies that the packets will be forwarded.
INT rsWSDStaticSourcePort	1.3.6.1.4.1.89.35.1.82.1.1	INTEGER	read-only	The index of the source port.
ROW rsWSDStaticStatus	1.3.6.1.4.1.89.35.1.82.1.4	RowStatus	read-write	This variable indicates the administrative status of this entry. Used to delete an entry of this table.
NTF rsWSDStatusMonitoring	1.3.6.1.4.1.89.35.1.0.6			This warning is generated for unavailable SNMP parameter from a server.
INT rsWSDSysFlashSize	1.3.6.1.4.1.89.35.1.69.1	INTEGER	read-only	The flash size of the device in mega bytes.
IP rsWSDSyslogAddress	1.3.6.1.4.1.89.35.1.27	IpAddress	read-write	The IP Address of the syslog station.
INT rsWSDSyslogStatus	1.3.6.1.4.1.89.35.1.26	INTEGER	read-write	Enable/Disable syslog message sending to remote station.
STR rsWSDSysManagedDate	1.3.6.1.4.1.89.35.1.69.4	DisplayString	read-write	The date will be sent in the format dd/mm/yyyy
STR rsWSDSysManagedTime	1.3.6.1.4.1.89.35.1.69.3	DisplayString	read-write	The time will be sent in the format hh:mm:ss
rsWSDSysParams	1.3.6.1.4.1.89.35.1.69
STR rsWSDSysUpTime	1.3.6.1.4.1.89.35.1.69.2	DisplayString	read-only	Time since the system was last reinitialized in a convenient format.
rsWSDTelnetParams	1.3.6.1.4.1.89.35.1.62
INT rsWSDTelnetPort	1.3.6.1.4.1.89.35.1.62.1	INTEGER	read-write	The Telnet Server Port.
INT rsWSDTelnetStatus	1.3.6.1.4.1.89.35.1.62.2	INTEGER	read-write	Telnet Status. Enable/Disable Telnet Terminal operation.
STR rsWSDTelnetUserEAddr	1.3.6.1.4.1.89.35.1.61.1.3	DisplayString	read-write	User email address.
rsWSDTelnetUserEntry	1.3.6.1.4.1.89.35.1.61.1		not-accessible	Information about a particular Telnet user.
STR rsWSDTelnetUserGroup	1.3.6.1.4.1.89.35.1.61.1.6	DisplayString	read-write	The group to which that user belongs.
STR rsWSDTelnetUserName	1.3.6.1.4.1.89.35.1.61.1.1	DisplayString	read-write	User Name.
STR rsWSDTelnetUserPassword	1.3.6.1.4.1.89.35.1.61.1.2	DisplayString	read-write	User password.
INT rsWSDTelnetUserSeverity	1.3.6.1.4.1.89.35.1.61.1.4	INTEGER	read-write	minimum failure severity to be notified by mail
ROW rsWSDTelnetUserStatus	1.3.6.1.4.1.89.35.1.61.1.5	RowStatus	read-write	Entry status
rsWSDTelnetUserTable	1.3.6.1.4.1.89.35.1.61		not-accessible	A table containing the users authorized to use TELNET.
rsWSDThresholdWarnings	1.3.6.1.4.1.89.35.1.64
INT rsWSDThreshTrapFloodDelay	1.3.6.1.4.1.89.35.1.64.1	INTEGER	read-write	This variable defines how far (in seconds) will 2 Threshold Warning Traps be spaced for the same Threshold Warning Type. Default = 0, i.e. DISABLED
INT rsWSDUseOneTrap	1.3.6.1.4.1.89.35.1.57	INTEGER	read-write	When enabled, a single trap is used to indicate server failure. When disabled, continuous traps are sent.
STR rsWSDUserPassword	1.3.6.1.4.1.89.35.1.33	DisplayString	read-write	Software download user provided password.
STR rsWSDUserVersion	1.3.6.1.4.1.89.35.1.34	DisplayString	read-write	Software download user provided version.
INT rsWSDVersionStatus	1.3.6.1.4.1.89.35.1.86	INTEGER	read-only	Indicates whether the current version is closed or still open (under development).
INT rsWSDVLANRedundOperStatus	1.3.6.1.4.1.89.35.1.52	INTEGER	read-write	Enable/Disable the backup redundant device for a VLAN.
INT rsWSDWanHeader	1.3.6.1.4.1.89.35.1.41.1.17	INTEGER	read-write	This variable indicates the RND WAN header type used for frames which pass through this interface. 'regular' specifies a 14 bytes header compatible with older OG versions and 'short' a 4 byte header compatible with the RND adapter product family.
STR rsWSDWebHelpLocation	1.3.6.1.4.1.89.35.1.68.3	DisplayString	read-write	Location of the help files directory.
rsWSDWebParams	1.3.6.1.4.1.89.35.1.68
INT rsWSDWebPort	1.3.6.1.4.1.89.35.1.68.1	INTEGER	read-write	The Web Server Port.
INT rsWSDWebStatus	1.3.6.1.4.1.89.35.1.68.2	INTEGER	read-write	Web Status. Enable/Disable Web operation.
NTF rsWSDWrongPassword	1.3.6.1.4.1.89.35.1.0.7			This warning is generated when a wrong software download password is provided.
NTF startTftp	1.3.6.1.4.1.89.0.14			Informational trap indicating that the device has intiated a TFTP session. rndErrorDesc will contain the file type in question
tftp	1.3.6.1.4.1.89.26.5
virtualLan	1.3.6.1.4.1.89.27
INT virtualLanAutoConfAgingTimeout	1.3.6.1.4.1.89.27.4	INTEGER	read-write	The units of this MIB object is seconds. Its value can be either 0 or in range 10..65535 .
virtualLanAutoConfEntry	1.3.6.1.4.1.89.27.3.1		not-accessible	One port, specified by vlAutoConfPortIfIndex, for which the RS will automatically learn its VL in accordance with rules, defined by the protocol specified in vlAutoConfProto.
virtualLanAutoConfTable	1.3.6.1.4.1.89.27.3		not-accessible	This table specifies per a routing protocol a set of ports, from which RS will automatically learning VL in accordance with rules, defined by the protocol.
virtualLanEntry	1.3.6.1.4.1.89.27.1.1		not-accessible	A list of information for each virtual LAN.
virtualLanPortEntry	1.3.6.1.4.1.89.27.2.1		not-accessible	A entry of this table specifies a VL and a port belonging to it
virtualLanPortsTable	1.3.6.1.4.1.89.27.2		not-accessible	For each VL (a ifIndex with a type of propVirtual(53)) an entry of this table specifies a set of ports, which it contains.
virtualLanProtocolVlan	1.3.6.1.4.1.89.27.5
virtualLanTable	1.3.6.1.4.1.89.27.1		not-accessible	An entry of this table specifies an new ifIndex with a type of propVirtual(53).
OCT virtualLanUserEtherType	1.3.6.1.4.1.89.27.5.1	OCTET STRING	read-write
OCT virtualLanUserMask	1.3.6.1.4.1.89.27.5.2	OCTET STRING	read-write
NTF vlanDynPortAdded	1.3.6.1.4.1.89.0.66
NTF vlanDynPortRemoved	1.3.6.1.4.1.89.0.67
T/F vlAutoConfigEnable	1.3.6.1.4.1.89.27.1.1.3	TruthValue	read-write	It is used only in the case of IP. The meanings of the values are: true(1): Autolearning is used for this VL false(2): Autolearning isn't used for this VL from ports, specified in the table virtualLanAutoConfTable.
INT vlAutoConfPortIfIndex	1.3.6.1.4.1.89.27.3.1.1	INTEGER	read-write	Port on which the autoconfig option should be supported
INT vlAutoConfProto	1.3.6.1.4.1.89.27.3.1.2	INTEGER	read-only	Protocol for which the autoconfig option is supported for the port specified by vlAutoConfPortIfIndex
ROW vlAutoConfStatus	1.3.6.1.4.1.89.27.3.1.3	RowStatus	read-write	It is used to delete an entry
INT vLIfIndex	1.3.6.1.4.1.89.27.1.1.1	INTEGER	read-write	An logical interface number, corresponded this VL
INT vLPortIfIndex	1.3.6.1.4.1.89.27.2.1.2	INTEGER	read-write	A physical port belonging to the VL specified by vlIfIndex.
ROW vLPortStatus	1.3.6.1.4.1.89.27.2.1.4	RowStatus	read-write	It is used to delete an entry
INT vLPortType	1.3.6.1.4.1.89.27.2.1.3	INTEGER	read-only	static means configured by user dynamic means autoconfigured by the RS
INT vlProto	1.3.6.1.4.1.89.27.1.1.2	INTEGER	read-write	The protocol, supported by this VL. The meanings of the values are: other: none of the following. This VL includes any protocol except the following protocols. It is a bridging VL. RS relies on a third-party router to exchange traffic between nodes on different virtual LANs of this type. IP: This is a routing VL, RS will route between nodes on different virtual LANs. IPmulticast: RS will broadcast the message to all the VL's ports. Used for video-conferencing applications. ipxRaw: This is a Routing VL, RS will route between nodes on different virtual LANs. ipxET: This is a routing VL, RS will route between nodes on different virtual LANs. ipxLLC: This is a routing VL, RS will route between nodes on different virtual LANs. ipxSNAP: This is a routing VL, RS will route between nodes on different virtual LANs. decNET: This is a bridging VL, RS relies on a third-party router to exchange traffic between nodes on different DECnet virtual LANs of this type. netBios: This is a Bridging VL, RS relies on a third-party router to exchange traffic between nodes on different NetBIOS virtual LANs of this type. appleTalk: This is a bridging VL, RS relies on a third-party router to exchange traffic between nodes on different AppleTalk virtual LANs of this type.
ROW vlStatus	1.3.6.1.4.1.89.27.1.1.4	RowStatus	read-write	It is used to delete an entry
INT vlType	1.3.6.1.4.1.89.27.1.1.5	INTEGER	read-write	regular - ordinary type specBroadcast - for switches that support VLANs as a set of ports and only as a broadcast domain: broadcast frames do not cross VLAN's bounders, but unicast frames may be transmitted between different VLANs. Permits passing of broadcast frames between Vgate's VLANs. specArpReq - for switches that support VLANs as a set of ports and only as a broadcast domain: broadcast frames do not cross VLAN's bounders, but unicast frames may be transmitted between different VLANs. Permits passing of ARP request frames between Vgate's VLANs. specBroadcastAndUnicast - for switches that support VLANs as a set of ports but no frame crosses VLAN's bounders. Permits passing of IP/ARP request broadcast and IP unicast frames between Vgate's VLANs. specArpReqAndUnicast - for switches that support VLANs as a set of ports but no frame crosses VLAN's bounders. Permits passing of ARP request broadcast and IP unicast frames between Vgate's VLANs. This type can be used only for IP VLANs.
wsdRedundEntry	1.3.6.1.4.1.89.35.1.16.1		not-accessible	The row definition for this table.
IP wsdRedundFarmAddr	1.3.6.1.4.1.89.35.1.16.1.1	IpAddress	read-only	The Farm Virtual Ip address on which the redundancy feature operates.
IP wsdRedundMainWsdAddr	1.3.6.1.4.1.89.35.1.16.1.2	IpAddress	read-only	The Ip address of the polled main wsd.
INT wsdRedundOperStatus	1.3.6.1.4.1.89.35.1.16.1.3	INTEGER	read-only	If active, the main wsd is considered inactive and the IP interface operates as its backup.
INT wsdRedundPollInterval	1.3.6.1.4.1.89.35.1.16.1.4	INTEGER	read-write	Polling interval for the main wsd (in seconds). If 0 the wsd is not polled.
INT wsdRedundStatus	1.3.6.1.4.1.89.35.1.16.1.6	INTEGER	read-write	Entry status
wsdRedundTable	1.3.6.1.4.1.89.35.1.16		not-accessible	List of Farm IP addresses backed up by this router.
INT wsdRedundTimeout	1.3.6.1.4.1.89.35.1.16.1.5	INTEGER	read-write	Interval in seconds during which the backed-up wsd must signal. If it does not signal, it is considered inactive and the IP interface starts operating as backup.

FAQ

What is RADWARE-MIB used for in monitoring Radware application delivery controllers?
It provides the base structure for monitoring Radware ADC and traffic management devices, exposing objects such as rndBrgVersion (bridge firmware version), rndErrorDesc/rndErrorSeverity (error condition reporting), and rndBridgeAlarm (bridging alarm state), giving administrators visibility into firmware identity and active fault conditions on the appliance.

How would I detect an active bridging fault on a Radware ADC via SNMP?
Poll rndBridgeAlarm for bridging-related alarm state alongside rndErrorDesc and rndErrorSeverity, which report the error description and severity; together these let an NMS flag a Radware device with an active bridging fault so admins can investigate before it disrupts traffic.

RFC description

Radware enterprise root MIB defining OID structure for load balancing and DDoS protection devices.

Start monitoring Radware application delivery controller (ADC) appliances, entire product line (base enterprise MIB) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RADWARE-MIB

What Is RADWARE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

FAQ

RFC description