BayNetworks-IISIS-MIB

All MIBs › BayNetworks-IISIS-MIB

Category: Routing Protocols, Vendor: Avaya

Description: Manages Integrated IS-IS routing protocol configuration and link-state database on Bay Networks routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BayNetworks-IISIS-MIB?

BayNetworks-IISIS-MIB is a Bay Networks (later Nortel) proprietary MIB configuring Integrated IS-IS (I-ISIS) routing on Wellfleet/BayRS routers. Its objects cover global protocol enable/disable state, router ID and type, SPF hold-down timing, maximum path count, maximum area count, and logging mask. As a configuration/protocol-status MIB it lets an administrator confirm I-ISIS is enabled with the expected router ID and SPF timing before diagnosing a routing-adjacency or convergence problem. It is deployed on legacy Bay Networks/Wellfleet routers running Integrated IS-IS. Engineers can download the BayNetworks-IISIS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in BayNetworks-IISIS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Bay Networks (Nortel)/Wellfleet BayRS routers

Monitoring Examples

An administrator checks wfIisisGeneralState and wfIisisSpfHoldDown to confirm I-ISIS is enabled with the expected SPF hold-down timer before investigating slower-than-expected convergence after a topology change.

What Can Be Monitored

I-ISIS enable state
router ID
SPF hold-down timer

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress

From RFC1213-MIB

DisplayString

From Wellfleet-COMMON-MIB

wfIisisGroup

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
wfIisisGeneralGroup	1.3.6.1.4.1.18.3.5.3.2.8.1
INT wfIisisGeneralDelete	1.3.6.1.4.1.18.3.5.3.2.8.1.1	INTEGER	read-write	'This value determines whether I-ISIS is configured'
INT wfIisisGeneralDisable	1.3.6.1.4.1.18.3.5.3.2.8.1.2	INTEGER	read-write	'The administrative status of I-ISIS in the router. The value 'enabled' denotes that the I-ISIS Process is active on at least one interface; 'disabled' disables it on all interfaces.'
INT wfIisisGeneralState	1.3.6.1.4.1.18.3.5.3.2.8.1.3	INTEGER	read-only	'The state of I-ISIS'
OCT wfIisisRouterId	1.3.6.1.4.1.18.3.5.3.2.8.1.4	OCTET STRING	read-write	This value contains the system ID of this Intermediate System.
STR wfIisisVersion	1.3.6.1.4.1.18.3.5.3.2.8.1.5	DisplayString	read-only	This read-only parameter identifies the version number of the IS-IS protocol to which this node conforms to.
INT wfIisisRouterType	1.3.6.1.4.1.18.3.5.3.2.8.1.6	INTEGER	read-write	This value determines whether this system is L1 only router L2 only router or L1-L2 IS.
INT wfIisisSpfHoldDown	1.3.6.1.4.1.18.3.5.3.2.8.1.7	INTEGER	read-write	Hold Down Timer for the SPF (in seconds). The SPF will run at most once per hold down timer value. A value of 0 means no hold down.
GAU wfIisisPrimaryLogMask	1.3.6.1.4.1.18.3.5.3.2.8.1.8	Gauge	read-write	A parameter to specify which I-ISIS log messages should be logged. This will only effect the Primary I-ISIS gate. Each bit represents a message as defined below. A 1 in that bit location means to log it and a 0 means not to put that log message in the log. Changing this value will NOT restart I-ISIS, but will take effct immediately(if there are any messages to be logged. bit 31 bit 0 +---------------------------------------+ \| \| +---------------------------------------+ bit0 Trace Messages bit1 INFO Level messages bit2 debug level messages bit3 I-ISIS interface state change messages bit4 Nbr state changes bit5 self-origination of LSA's bit6 receipt of new LSA's bit7 changes to I-ISIS`s Routing Table bit8 Bad LS requests, Ack's, or updates bit9 receipt of less recent LSA's bit10 receipt of more recent self-originated LSA's bit11 receipt of MAxAge LSA's (i.e. LSA's being flushed) bit12 - 31 reserved
INT wfIisisMaximumPath	1.3.6.1.4.1.18.3.5.3.2.8.1.9	INTEGER	read-write	Maximum number of equal cost paths allowed for a network installed by OSPF.
INT wfIisisMaxAreas	1.3.6.1.4.1.18.3.5.3.2.8.1.10	INTEGER	read-write	This value defines the maximum allowable number of areas addresses for the domain that this router exists in.
GAU wfIisisNumL1Lsps	1.3.6.1.4.1.18.3.5.3.2.8.1.11	Gauge	read-only	Number of L2 LSPS stored in the database
GAU wfIisisNumL2Lsps	1.3.6.1.4.1.18.3.5.3.2.8.1.12	Gauge	read-only	Number of L2 LSPS stored in the database
INT wfIisisCksumIsPdus	1.3.6.1.4.1.18.3.5.3.2.8.1.13	INTEGER	read-write	This value indicates whether ISIS PDUs will carry a checksum.
STR wfIisisL1LspPassword	1.3.6.1.4.1.18.3.5.3.2.8.1.14	DisplayString	read-write	This assigns a password such that only L1 Lsps with the matching password will be accepted. All L1 Lsps generated by this system will contain this string in the password option.
STR wfIisisL2LspPassword	1.3.6.1.4.1.18.3.5.3.2.8.1.15	DisplayString	read-write	This assigns a password such that only L2 Lsps with the matching password will be accepted. All L2 Lsps generated by this system will contain this string in the password option.
OCT wfIisisAreaAddr	1.3.6.1.4.1.18.3.5.3.2.8.1.16	OCTET STRING	read-write	This Assigns the area address for this router. This field must be filled in. If the user doesn't enter a value, then assign 0x470005. Site Manager must force the user to enter at least a 3-byte value for this field.
OCT wfIisisAreaAddrAlias1	1.3.6.1.4.1.18.3.5.3.2.8.1.17	OCTET STRING	read-write	This Assigns the first area address alias for this router. This field does no have to be filled in, but if the user tries to enter a value, Site Manager must make sure that it is at least 3-bytes in length.
OCT wfIisisAreaAddrAlias2	1.3.6.1.4.1.18.3.5.3.2.8.1.18	OCTET STRING	read-write	This Assigns the second area address alias for this router. This field does no have to be filled in, but if the user tries to enter a value, Site Manager must make sure that it is at least 3-bytes in length.
CTR wfIisisL1CorruptedLsps	1.3.6.1.4.1.18.3.5.3.2.8.1.19	Counter	read-only	Number of Corrupted L1-Lsps Detected.
CTR wfIisisL2CorruptedLsps	1.3.6.1.4.1.18.3.5.3.2.8.1.20	Counter	read-only	Number of Corrupted L2-Lsps Detected.
CTR wfIisisL1LspDbOverLoads	1.3.6.1.4.1.18.3.5.3.2.8.1.21	Counter	read-only	Number of times the L1 Lsp Database Overload event has been generated.
CTR wfIisisL2LspDbOverLoads	1.3.6.1.4.1.18.3.5.3.2.8.1.22	Counter	read-only	Number of times the L2Lsp Database Overload event has been generated.
OCT wfIisisNearestL2Is	1.3.6.1.4.1.18.3.5.3.2.8.1.23	OCTET STRING	read-only	This is the ID of the nearest L2 system in this area.
GAU wfIisisNumL1Routes	1.3.6.1.4.1.18.3.5.3.2.8.1.24	Gauge	read-only	Number of L1 Routes.
GAU wfIisisNumL2Routes	1.3.6.1.4.1.18.3.5.3.2.8.1.25	Gauge	read-only	Number of L2 Routes.
INT wfIisisMinLSPGenerationInterval	1.3.6.1.4.1.18.3.5.3.2.8.1.26	INTEGER	read-write	Min time interval(in secs) before LSP generation
INT wfIisisMaxLSPGenerationInterval	1.3.6.1.4.1.18.3.5.3.2.8.1.27	INTEGER	read-write	Max time interval(in secs) before LSP generation
INT wfIisisMaxAge	1.3.6.1.4.1.18.3.5.3.2.8.1.28	INTEGER	read-write	The lifetime of the lsp after which it will be considered expired
INT wfIisisMinLSPXmtInterval	1.3.6.1.4.1.18.3.5.3.2.8.1.29	INTEGER	read-write
INT wfIisisPartialSNPInterval	1.3.6.1.4.1.18.3.5.3.2.8.1.30	INTEGER	read-write
INT wfIisisZeroAgeLifetime	1.3.6.1.4.1.18.3.5.3.2.8.1.31	INTEGER	read-write	If the remaining lifetime of an LSP reaches zero, the expired LSP will be kept in the database for this time (in seconds)
INT wfIisisAgePend	1.3.6.1.4.1.18.3.5.3.2.8.1.32	INTEGER	read-write	The number of entries processed before this gate pends
INT wfIisisCsnpBuildInterval	1.3.6.1.4.1.18.3.5.3.2.8.1.33	INTEGER	read-write	The interval at which CSNPs are generated by the Designated IS
INT wfIisisL2LspBufferSize	1.3.6.1.4.1.18.3.5.3.2.8.1.34	INTEGER	read-write	The max size of the LSP generated by system
CTR wfIisisL1SpfCnt	1.3.6.1.4.1.18.3.5.3.2.8.1.35	Counter	read-only	The number of times the L1 I-ISIS SPF algorithm has been run for this area.
CTR wfIisisL2SpfCnt	1.3.6.1.4.1.18.3.5.3.2.8.1.36	Counter	read-only	The number of times the L2 I-ISIS SPF algorithm has been run for this area.
wfIisisAreaTable	1.3.6.1.4.1.18.3.5.3.2.8.2		not-accessible	-- The I-ISIS Area Data Structure contains information -- regarding the various areas. The interfaces and -- links are configured as part of these areas. -- Area 0.0.0.0, by definition, is the Backbone Area 'Information describing the configured parameters and cumulative statistics of the router's attached areas.' REFERENCE 'I-ISIS Version 2, Section 6 The Area Data Structure'
wfIisisAreaEntry	1.3.6.1.4.1.18.3.5.3.2.8.2.1		not-accessible	'Information describing the configured parameters and cumulative statistics of one of the router's attached areas.'
INT wfIisisAreaDelete	1.3.6.1.4.1.18.3.5.3.2.8.2.1.1	INTEGER	read-write	This value determines if the I-ISIS router is configured with this area.
INT wfIisisAreaDisable	1.3.6.1.4.1.18.3.5.3.2.8.2.1.2	INTEGER	read-write	This value indicates the state of this area on the I-ISIS router.
INT wfIisisAreaState	1.3.6.1.4.1.18.3.5.3.2.8.2.1.3	INTEGER	read-only	This value indicates the state of the I-ISIS Area.
IP wfIisisAreaId	1.3.6.1.4.1.18.3.5.3.2.8.2.1.4	IpAddress	read-only	A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the I-ISIS backbone.
CTR wfIisisSpfCnt	1.3.6.1.4.1.18.3.5.3.2.8.2.1.5	Counter	read-only	The number of times the I-ISIS SPF algorithm has been run for this area.
wfIisisL1LspHdrTable	1.3.6.1.4.1.18.3.5.3.2.8.3		not-accessible	2 u_int32's so the inst_id len is 2.
wfIisisL1LspHdrEntry	1.3.6.1.4.1.18.3.5.3.2.8.3.1		not-accessible	A Record in the Level 1 Lsp Header Table
OCT wfIisisL1LspHdrLspId	1.3.6.1.4.1.18.3.5.3.2.8.3.1.1	OCTET STRING	read-only	LSPID = Source ID + Pseudo-node ID + LSP number
INT wfIisisL1LspHdrLifetime	1.3.6.1.4.1.18.3.5.3.2.8.3.1.2	INTEGER	read-only	Lsp Lifetime
INT wfIisisL1LspHdrSeqnum	1.3.6.1.4.1.18.3.5.3.2.8.3.1.3	INTEGER	read-only	Lsp sequence number
INT wfIisisL1LspHdrFlags	1.3.6.1.4.1.18.3.5.3.2.8.3.1.4	INTEGER	read-only	Flags: P/ATT/LSPDBOL/IS type
OCT wfIisisL1LspHdrCksum	1.3.6.1.4.1.18.3.5.3.2.8.3.1.5	OCTET STRING	read-only	Checksum
wfIisisL2LspHdrTable	1.3.6.1.4.1.18.3.5.3.2.8.4		not-accessible	2 u_int32's so the inst_id len is 2.
wfIisisL2LspHdrEntry	1.3.6.1.4.1.18.3.5.3.2.8.4.1		not-accessible	A Record in the Lsp Header Table
OCT wfIisisL2LspHdrLspId	1.3.6.1.4.1.18.3.5.3.2.8.4.1.1	OCTET STRING	read-only	LSPID = Source ID + Pseudo-node ID + LSP number
INT wfIisisL2LspHdrLifetime	1.3.6.1.4.1.18.3.5.3.2.8.4.1.2	INTEGER	read-only	Lsp Lifetime
INT wfIisisL2LspHdrSeqnum	1.3.6.1.4.1.18.3.5.3.2.8.4.1.3	INTEGER	read-only	Lsp sequence number
INT wfIisisL2LspHdrFlags	1.3.6.1.4.1.18.3.5.3.2.8.4.1.4	INTEGER	read-only	Flags: P/ATT/LSPDBOL/IS type
OCT wfIisisL2LspHdrCksum	1.3.6.1.4.1.18.3.5.3.2.8.4.1.5	OCTET STRING	read-only	Checksum
wfIisisIfTable	1.3.6.1.4.1.18.3.5.3.2.8.5		not-accessible	-- I-ISIS Interface Table -- The I-ISIS Interface Table augments the ifTable with I-ISIS -- specific information. 'The I-ISIS Interface Table describes the interfaces from the viewpoint of I-ISIS.'
wfIisisIfEntry	1.3.6.1.4.1.18.3.5.3.2.8.5.1		not-accessible	'The I-ISIS Interface Entry describes one interface from the viewpoint of I-ISIS.'
INT wfIisisIfDelete	1.3.6.1.4.1.18.3.5.3.2.8.5.1.1	INTEGER	read-write	This variable determines in an I-ISIS Interface has been configured on the router.
INT wfIisisIfDisable	1.3.6.1.4.1.18.3.5.3.2.8.5.1.2	INTEGER	read-write	'The I-ISIS interface's administrative status. The value 'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to I-ISIS.'
IP wfIisisIfIpAddress	1.3.6.1.4.1.18.3.5.3.2.8.5.1.3	IpAddress	read-only	'The IP address of this I-ISIS interface.'
INT wfIisisAddressLessIf	1.3.6.1.4.1.18.3.5.3.2.8.5.1.4	INTEGER	read-only	'For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address.'
INT wfIisisIfRouterLevel	1.3.6.1.4.1.18.3.5.3.2.8.5.1.5	INTEGER	read-write	This is the level protocol that the circuit runs. Its a bit mask to allow for some combination of L1, L2, External, ES-IS-only.
INT wfIisisIfL1DefaultMetric	1.3.6.1.4.1.18.3.5.3.2.8.5.1.6	INTEGER	read-write	This is the default cost of using this circuit for L1 traffic.
INT wfIisisIfL2DefaultMetric	1.3.6.1.4.1.18.3.5.3.2.8.5.1.7	INTEGER	read-write	This is the default cost of using this circuit for L2 traffic.
INT wfIisisIfL1DrPriority	1.3.6.1.4.1.18.3.5.3.2.8.5.1.8	INTEGER	read-write	This is the priority for this system to become L1 designated router on this LAN circuit.
INT wfIisisIfL2DrPriority	1.3.6.1.4.1.18.3.5.3.2.8.5.1.9	INTEGER	read-write	This is the priority for this system to become L2 designated router on this LAN circuit.
INT wfIisisIfHelloTimer	1.3.6.1.4.1.18.3.5.3.2.8.5.1.10	INTEGER	read-write	This is the period (secs) between IIH hello transmissions.
STR wfIisisIfPassword	1.3.6.1.4.1.18.3.5.3.2.8.5.1.11	DisplayString	read-write	This is Circuit Password for this circuit. Used to filter out Hellos from systems without the correct password.
INT wfIisisIfHelloMtuSize	1.3.6.1.4.1.18.3.5.3.2.8.5.1.12	INTEGER	read-write	Configure Hello MTU size per I-ISIS interface This parameter has the following values/meanings: 1 - Use the MTU specified by IP 2 - Use the MTU of ethernet, regardless of what IP says > 2 - Use this value as the actual MTU. If the value is smaller than what I-ISIS needs as a minimum then the mtu specified by IP is used. For example, 3 would never be used as an MTU.
INT wfIisisIfIihHoldMultiplier	1.3.6.1.4.1.18.3.5.3.2.8.5.1.13	INTEGER	read-write	This is the multiplier value used to compute the hold time set in the IIH PDUs transmitted from this router. Hold time equals IIH Timer times IIH Hold Multiplier.
INT wfIisisIfIshHoldMultiplier	1.3.6.1.4.1.18.3.5.3.2.8.5.1.14	INTEGER	read-write	This is the multiplier value used to compute the hold time set in the ISH PDUs transmitted from this router. Hold time equals IIH Timer times IIH Hold Multiplier.
INT wfIisisIfType	1.3.6.1.4.1.18.3.5.3.2.8.5.1.15	INTEGER	read-write	The IISIS interface type.
INT wfIisisIfCsnpTimer	1.3.6.1.4.1.18.3.5.3.2.8.5.1.16	INTEGER	read-write	This is the period (in seconds) between CSNP transmissions.
wfIisisIfStatsTable	1.3.6.1.4.1.18.3.5.3.2.8.6		not-accessible	-- I-ISIS Interface Stats Table.
wfIisisIfStatsEntry	1.3.6.1.4.1.18.3.5.3.2.8.6.1		not-accessible	'The information regarding a interface'.
IP wfIisisIfStatsIpAddress	1.3.6.1.4.1.18.3.5.3.2.8.6.1.1	IpAddress	read-only	'The IP address of this I-ISIS interface.'
INT wfIisisStatsAddressLessIf	1.3.6.1.4.1.18.3.5.3.2.8.6.1.2	INTEGER	read-only	'For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address.'
INT wfIisisIfStatsState	1.3.6.1.4.1.18.3.5.3.2.8.6.1.3	INTEGER	read-only	This indicates whether the circuit state is up or down.
INT wfIisisIfStatsCct	1.3.6.1.4.1.18.3.5.3.2.8.6.1.4	INTEGER	read-only	A unique value for each known circuit.
CTR wfIisisIfStatsL1TxHellos	1.3.6.1.4.1.18.3.5.3.2.8.6.1.5	Counter	read-only	Number of I-ISIS Hello packets transmitted.
CTR wfIisisIfStatsL2TxHellos	1.3.6.1.4.1.18.3.5.3.2.8.6.1.6	Counter	read-only	Number of I-ISIS Hello packets transmitted.
CTR wfIisisIfStatsL1RxHellos	1.3.6.1.4.1.18.3.5.3.2.8.6.1.7	Counter	read-only	Number of I-ISIS Hello packets received.
CTR wfIisisIfStatsL2RxHellos	1.3.6.1.4.1.18.3.5.3.2.8.6.1.8	Counter	read-only	Number of I-ISIS Hello packets received.
CTR wfIisisIfStatsL1Drops	1.3.6.1.4.1.18.3.5.3.2.8.6.1.9	Counter	read-only	Number of I-ISIS packets dropped because of invalid information in the packet.
CTR wfIisisIfStatsL2Drops	1.3.6.1.4.1.18.3.5.3.2.8.6.1.10	Counter	read-only	Number of I-ISIS packets dropped because of invalid information in the packet.
OCT wfIisisIfStatsL1DesignatedRouter	1.3.6.1.4.1.18.3.5.3.2.8.6.1.11	OCTET STRING	read-only	This is the ID of the L1 Designated Router on this circuit.
OCT wfIisisIfStatsL2DesignatedRouter	1.3.6.1.4.1.18.3.5.3.2.8.6.1.12	OCTET STRING	read-only	This is the ID of the L2 Designated Router on this circuit.
CTR wfIisisIfStatsTxL1Lsp	1.3.6.1.4.1.18.3.5.3.2.8.6.1.13	Counter	read-only	Number of L1 LSPs(Link State Packet) transmitted.
CTR wfIisisIfStatsTxL2Lsp	1.3.6.1.4.1.18.3.5.3.2.8.6.1.14	Counter	read-only	Number of L2 LSPs(Link State Packet) transmitted.
CTR wfIisisIfStatsTxL1Csnp	1.3.6.1.4.1.18.3.5.3.2.8.6.1.15	Counter	read-only	Number of L1 CSNPs(Complete sequence no. packet) transmitted.
CTR wfIisisIfStatsTxL2Csnp	1.3.6.1.4.1.18.3.5.3.2.8.6.1.16	Counter	read-only	Number of L2 CSNPs(Complete sequence no. packet) transmitted.
CTR wfIisisIfStatsTxL1Psnp	1.3.6.1.4.1.18.3.5.3.2.8.6.1.17	Counter	read-only	Number of L1 PSNPs(Partial sequence no. packet) transmitted.
CTR wfIisisIfStatsTxL2Psnp	1.3.6.1.4.1.18.3.5.3.2.8.6.1.18	Counter	read-only	Number of L2 PSNPs(Partial sequence no. packet) transmitted.
CTR wfIisisIfStatsRxL1Lsp	1.3.6.1.4.1.18.3.5.3.2.8.6.1.19	Counter	read-only	Number of L1 LSPs(Link State Packet) received.
CTR wfIisisIfStatsRxL2Lsp	1.3.6.1.4.1.18.3.5.3.2.8.6.1.20	Counter	read-only	Number of L2 LSPs(Link State Packet) received.
CTR wfIisisIfStatsRxL1Csnp	1.3.6.1.4.1.18.3.5.3.2.8.6.1.21	Counter	read-only	Number of L1 CSNPs(Complete sequence no. packet) received.
CTR wfIisisIfStatsRxL2Csnp	1.3.6.1.4.1.18.3.5.3.2.8.6.1.22	Counter	read-only	Number of L2 CSNPs(Complete sequence no. packet) received.
CTR wfIisisIfStatsRxL1Psnp	1.3.6.1.4.1.18.3.5.3.2.8.6.1.23	Counter	read-only	Number of L1 PSNPs(Partial sequence no. packet) received.
CTR wfIisisIfStatsRxL2Psnp	1.3.6.1.4.1.18.3.5.3.2.8.6.1.24	Counter	read-only	Number of L2 PSNPs(Partial sequence no. packet) received.
GAU wfIisisIfStatsL1NbrCount	1.3.6.1.4.1.18.3.5.3.2.8.6.1.25	Gauge	read-only	Count of neighbors with any state.
GAU wfIisisIfStatsL2NbrCount	1.3.6.1.4.1.18.3.5.3.2.8.6.1.26	Gauge	read-only	Count of neighbors with any state.
GAU wfIisisIfStatsL1AdjCount	1.3.6.1.4.1.18.3.5.3.2.8.6.1.27	Gauge	read-only	Count of neighbors with state UP.
GAU wfIisisIfStatsL2AdjCount	1.3.6.1.4.1.18.3.5.3.2.8.6.1.28	Gauge	read-only	Count of neighbors with state UP.
wfIisisDynNbrTable	1.3.6.1.4.1.18.3.5.3.2.8.7		not-accessible	-- I-ISIS Dynamic Neighbor Table The I-ISIS Dynamic Neighbor Table describes all neighbors in the locality of the subject router learned during operation.
wfIisisDynNbrEntry	1.3.6.1.4.1.18.3.5.3.2.8.7.1		not-accessible	'The information regarding a single neighbor.' REFERENCE 'I-ISIS Version 2, Section 10 The Neighbor Data Structure'
INT wfIisisDynNbrState	1.3.6.1.4.1.18.3.5.3.2.8.7.1.1	INTEGER	read-only	'The State of the relationship with this Neighbor.'
IP wfIisisDynNbrIpAddr	1.3.6.1.4.1.18.3.5.3.2.8.7.1.2	IpAddress	read-only	'The IP address of this neighbor.'
IP wfIisisDynNbrIfAddr	1.3.6.1.4.1.18.3.5.3.2.8.7.1.3	IpAddress	read-only	'Our Interface IP address for this neighbor.'
INT wfIisisDynNbrAddressLessIndex	1.3.6.1.4.1.18.3.5.3.2.8.7.1.4	INTEGER	read-only	'The circuit over which this neighbor is learnt.'
OCT wfIisisDynNbrRtrId	1.3.6.1.4.1.18.3.5.3.2.8.7.1.5	OCTET STRING	read-only	'A 6 byte field representing the Intermediate system Id.'
INT wfIisisDynNbrDatabase	1.3.6.1.4.1.18.3.5.3.2.8.7.1.6	INTEGER	read-only	Database into which the Adjacency is stored, 1=ES, 2=Level 1 IS, 3=Level 2 IS.
INT wfIisisDynNbrType	1.3.6.1.4.1.18.3.5.3.2.8.7.1.7	INTEGER	read-only	The type of adjacency.
INT wfIisisDynNbrPseudonodeId	1.3.6.1.4.1.18.3.5.3.2.8.7.1.8	INTEGER	read-only	A unique value for each known circuit.
INT wfIisisDynNbrHoldTime	1.3.6.1.4.1.18.3.5.3.2.8.7.1.9	INTEGER	read-only	Hold Time received from neighbor.
INT wfIisisDynNbrPriority	1.3.6.1.4.1.18.3.5.3.2.8.7.1.10	INTEGER	read-only	Priority to become designated router. IS only.
OCT wfIisisDynNbrSnpaAddr	1.3.6.1.4.1.18.3.5.3.2.8.7.1.11	OCTET STRING	read-only	SNPA address for neighbor.
OCT wfIisisDynNbrLanId	1.3.6.1.4.1.18.3.5.3.2.8.7.1.12	OCTET STRING	read-only	LAN ID of Designated IS of this interface.

RFC description

Bay Networks vendor-private MIB for managing IS-IS routing protocol on enterprise routers and switches; predecessor to Nortel Networks.

Start monitoring Bay Networks/Nortel (Wellfleet BayRS) routers (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BayNetworks-IISIS-MIB

What Is BayNetworks-IISIS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description