BTI-OL-MIB

All MIBs › BTI-OL-MIB

Organization: BTI Systems Inc.

Last Updated: 2012-08-17

Category: Optical and WDM, Vendor: BTI Systems

Description: Manages optical layer parameters and wavelength configuration on BTI Systems optical networking equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BTI-OL-MIB?

This is a BTI Systems enterprise MIB for managing the optical layer of BTI's dynamic optical networking platforms, covering components such as DLA-series optical amplifiers and ROB-series ROADM (Reconfigurable Optical Add-Drop Multiplexer) modules. It exposes configuration objects for optical groups and equipment, including group type/custom labeling fields and equipment/cp-type indices, plus dedicated performance and OSC (Optical Supervisory Channel) event-notification branches. It supports monitoring the hardware health and operational status of optical amplifier and ROADM modules, including performance data on the optical layer and fault events raised over the optical supervisory channel, which are key indicators of degraded fiber links or failing optical components. It is a self-contained vendor MIB specific to BTI's optical hardware, without an evident dependency on IETF optical MIBs. It is deployed in metro/long-haul DWDM transport networks using BTI optical transport platforms, where network operations centers poll optical group/equipment tables and subscribe to OSC event traps to catch amplifier or ROADM degradation before it causes service loss. Network engineers evaluating or troubleshooting this functionality can download the BTI-OL-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in BTI-OL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

BTI Systems optical amplifier (DLA-series)
BTI Systems ROADM module (ROB-series)

Monitoring Examples

An operator queries olGroupTable/olGroupEntry rows, indexed by olGroupIdx, to see olGroupType and olGroupId for each configured optical group, and olEqptTable/olEqptEntry for equipment identified by olEqptCpTypeIdx to check amplifier or ROADM module status. Data under olPerformance would be polled for optical-layer performance trends, while a rise in events reported via olOSCEvtNotifications would flag a supervisory-channel fault such as amplifier gain drift or ROADM module failure. Provisioning changes to a group are tracked through olGroupRowStatus and merge operations via olGroupMerge.

What Can Be Monitored

optical group configuration
equipment/amplifier status
optical performance metrics
OSC (optical supervisory channel) fault events
ROADM module status

Imported Objects

From BTI-7000-MIB

condCodeType	OBJECT-TYPE
condDateAndTime	OBJECT-TYPE
condDescription	OBJECT-TYPE
condObjectType	OBJECT-TYPE
condReportType	OBJECT-TYPE
condServiceAffecting	OBJECT-TYPE
condSeverity	OBJECT-TYPE
evtCodeType	OBJECT-TYPE
evtDateAndTime	OBJECT-TYPE
evtDescription	OBJECT-TYPE
evtObjectType	OBJECT-TYPE
olCondNotifications	OBJECT-IDENTITY
olEvtNotifications	OBJECT-IDENTITY
opticalLayer	OBJECT-IDENTITY
tcaDateAndTime	OBJECT-TYPE
tcaIntervalType	OBJECT-TYPE
tcaMontype	OBJECT-TYPE
tcaThreshold	OBJECT-TYPE
tcaValue	OBJECT-TYPE
trapSeqNum	OBJECT-TYPE

From BTI-MIB

btiModules

OBJECT-IDENTITY

From BTI-TC-MIB

AdminStatus
BERType
CpType
FiberType
FixedX10
FixedX100
HoursAndMinutes
InitializeCmd
OperStatQlfr
OperStatus
PMIntervalType
PMValidity

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
CPT eqptConnDstCpTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.5.1.6	CpType	not-accessible	The type of circuit pack on which the destination port of the equipment connection is located.
INT eqptConnDstIdx	1.3.6.1.4.1.18070.2.2.1.16.5.1.10	INTEGER	not-accessible	The number of the port of the specified port type of the destination port of the equipment connection.
OLP eqptConnDstPortTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.5.1.9	OlPortType	not-accessible	The type of the destination port of the equipment connection, according to the function it provides.
INT eqptConnDstShelfIdx	1.3.6.1.4.1.18070.2.2.1.16.5.1.7	INTEGER	not-accessible	The number of the shelf on which the destination port of the equipment connection is located.
INT eqptConnDstSlotIdx	1.3.6.1.4.1.18070.2.2.1.16.5.1.8	INTEGER	not-accessible	The number of the slot on which the destination port of the equipment connection is located.
eqptConnEntry	1.3.6.1.4.1.18070.2.2.1.16.5.1		not-accessible	The conceptual row object of the equipment connection table.
ROW eqptConnRowStatus	1.3.6.1.4.1.18070.2.2.1.16.5.1.100	RowStatus	accessible-for-notify	The equipment connection table RowStatus object is not readable or writeable because all entries in the table are automatically created and deleted as equipment modules are assigned and unassigned to optical layer groupings. This equipment connection row status object is used only in database change notifications to indicate if the row has been created or deleted.
CPT eqptConnSrcCpTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.5.1.1	CpType	not-accessible	The type of circuit pack on which the source port of the equipment connection is located.
INT eqptConnSrcIdx	1.3.6.1.4.1.18070.2.2.1.16.5.1.5	INTEGER	not-accessible	The number of the port of the specified port type of the source port of the equipment connection.
OLP eqptConnSrcPortTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.5.1.4	OlPortType	not-accessible	The type of the source port of the equipment connection, according to the function it provides.
INT eqptConnSrcShelfIdx	1.3.6.1.4.1.18070.2.2.1.16.5.1.2	INTEGER	not-accessible	The number of the shelf on which the source port of the equipment connection is located.
INT eqptConnSrcSlotIdx	1.3.6.1.4.1.18070.2.2.1.16.5.1.3	INTEGER	not-accessible	The number of the slot on which the source port of the equipment connection is located.
eqptConnTable	1.3.6.1.4.1.18070.2.2.1.16.5		not-accessible	This table lists all intra-group optical fiber patch connections between ports on equipment modules assigned to optical layer groupings.
INT eqptConnType	1.3.6.1.4.1.18070.2.2.1.16.5.1.11	INTEGER	read-only	The type of optical fiber patch cable for the equipment connection entry.
ADM odccAdminStatus	1.3.6.1.4.1.18070.2.2.1.16.7.1.5	AdminStatus	read-create	The administrative status of the ODCC. The default value is disabled if the supporting ODC is disabled, otherwise it is enabled.
CPT odccCpTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.7.1.1	CpType	not-accessible	The type of circuit pack on which the ODCC is located.
odccEntry	1.3.6.1.4.1.18070.2.2.1.16.7.1		not-accessible	The conceptual row object of the ODCC table.
INT odccLineIdx	1.3.6.1.4.1.18070.2.2.1.16.7.1.4	INTEGER	not-accessible	The line number of the ODCC.
ROW odccRowStatus	1.3.6.1.4.1.18070.2.2.1.16.7.1.100	RowStatus	read-create	Used to control the addition and deletion of entries in the ODCC table, which in turn controls the provisioning and de-provisioning of ODCC objects.
INT odccShelfIdx	1.3.6.1.4.1.18070.2.2.1.16.7.1.2	INTEGER	not-accessible	The number of the shelf in which the ODCC is located.
INT odccSlotIdx	1.3.6.1.4.1.18070.2.2.1.16.7.1.3	INTEGER	not-accessible	The number of the slot in which the ODC is located.
odccTable	1.3.6.1.4.1.18070.2.2.1.16.7		not-accessible	This table lists all provisioned ODCC objects on equipment modules assigned to optical layer groupings.
CPT olEqptCpTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.3.1.1	CpType	not-accessible	The type of circuit pack of the equipment module that is assigned to the optical layer group.
INT olEqptDegreeNum	1.3.6.1.4.1.18070.2.2.1.16.3.1.5	INTEGER	read-create	The optical layer group degree to which the equipment module is assigned.
olEqptEntry	1.3.6.1.4.1.18070.2.2.1.16.3.1		not-accessible	The conceptual row object of the optical layer equipment table.
INT olEqptGroupNum	1.3.6.1.4.1.18070.2.2.1.16.3.1.4	INTEGER	read-create	The optical layer group to which the equipment modules is assigned.
ROW olEqptRowStatus	1.3.6.1.4.1.18070.2.2.1.16.3.1.100	RowStatus	read-create	Used to control the addition and deletion of entries in the optical layer equipment table, which in turn, controls the assigning and unassigning of equipment modules to/from an optical layer grouping.
INT olEqptShelfIdx	1.3.6.1.4.1.18070.2.2.1.16.3.1.2	INTEGER	not-accessible	The number of the shelf of the equipment module that is assigned to the optical layer group. For equipment modules that do not reside in a shelf (40-channel Mux/Demux), the value of this object is 0.
INT olEqptSlotIdx	1.3.6.1.4.1.18070.2.2.1.16.3.1.3	INTEGER	not-accessible	The number of the slot of the equipment module that is assigned to the optical layer group. For equipment modules that do not reside in an active shelf slot (ex. 40-channel Mux/Demux), this object represents the module index among modules attributed to shelf 0.
olEqptTable	1.3.6.1.4.1.18070.2.2.1.16.3		not-accessible	This table lists all provisioned equipment modules that are assigned to an optical layer grouping.
STR olGroupCustom1	1.3.6.1.4.1.18070.2.2.1.16.1.1.4	DisplayString	read-create	A variable length text string for operating company use.
STR olGroupCustom2	1.3.6.1.4.1.18070.2.2.1.16.1.1.5	DisplayString	read-create	A variable length text string for operating company use.
STR olGroupCustom3	1.3.6.1.4.1.18070.2.2.1.16.1.1.6	DisplayString	read-create	A variable length text string for operating company use.
olGroupEntry	1.3.6.1.4.1.18070.2.2.1.16.1.1		not-accessible	The conceptual row object of the optical layer group table.
STR olGroupId	1.3.6.1.4.1.18070.2.2.1.16.1.1.3	DisplayString	read-create	Textual data recorded by the user to briefly identify the provisioned optical layer group in a manner useful to the user.
INT olGroupIdx	1.3.6.1.4.1.18070.2.2.1.16.1.1.1	INTEGER	not-accessible	A number which uniquely identifies the optical layer group within the node.
olGroupMerge	1.3.6.1.4.1.18070.2.2.1.16.11
INT olGroupMergeCmd	1.3.6.1.4.1.18070.2.2.1.16.11.1	INTEGER	read-write	This object is used to invoke an optical layer group merge operation. The optical layer group merge is activated when this object is set to invoke(2). The values of the olGroupMergePrimary and olGroupMergeSecondary objects must be set in the same set request as this object. When a get is performed on this object, the value returned is idle(1).
INT olGroupMergePrimary	1.3.6.1.4.1.18070.2.2.1.16.11.2	INTEGER	read-write	The identifier of the primary optical layer group of the merge.
INT olGroupMergeSecondary	1.3.6.1.4.1.18070.2.2.1.16.11.3	INTEGER	read-write	The identifier of the secondary optical layer group of the merge.
ROW olGroupRowStatus	1.3.6.1.4.1.18070.2.2.1.16.1.1.100	RowStatus	read-create	Used to control the addition and deletion of entries in the optical layer group table.
olGroupTable	1.3.6.1.4.1.18070.2.2.1.16.1		not-accessible	This table lists all provisioned optical layer module groupings on the node.
OLG olGroupType	1.3.6.1.4.1.18070.2.2.1.16.1.1.2	OlGroupType	read-create	The optical layer group configuration type. This is a mandatory object that must be specified when a row of the table is created. The value of none is not applicable for this object.
olMib	1.3.6.1.4.1.18070.1.6			The external MIB definitions for the managenent of the BTI Dynamic Optical Layer components including DLA-series amplifiers and ROB-series ROADM modules.
HOU olOSCActAutoEnableTimer	1.3.6.1.4.1.18070.2.2.1.16.6.1.9	HoursAndMinutes	read-only	Indicates the time remaining on the auto-enable timer if it is actively counting down. Otherwise, the value returned is 000-00.
ADM olOSCAdminStatus	1.3.6.1.4.1.18070.2.2.1.16.6.1.5	AdminStatus	read-write	The administrative status of the OSC. The default value is autoEnabled if the supporting equipment is enabled or autoEnabled, otherwise it is disabled.
HOU olOSCAutoEnableTimer	1.3.6.1.4.1.18070.2.2.1.16.6.1.8	HoursAndMinutes	read-write	Specifies the auto-enable timer for the targeted OSC. This value only applies if the olOSCAdminStatus object is set to autoEnabled, in which case the default value is 008-00, otherwise, it is 000-00.
olOSCCondNotifications	1.3.6.1.4.1.18070.2.2.2.2.28.1
CPT olOSCCpTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.6.1.1	CpType	not-accessible	The type of circuit pack on which the OSC is located.
CPT olOSCCrntPMCpTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.1	CpType	not-accessible	The type of circuit pack on which the optical layer OSC targeted for PMs is located.
INI olOSCCrntPMCVSInitialize	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.18	InitializeCmd	read-write	Used to initialize the value of the olOSCCrntPMCVSValue object to 0.
DAT olOSCCrntPMCVSTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.16	DateAndTime	read-only	The date and time stamp of the section layer coding violations value.
PMV olOSCCrntPMCVSValidity	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.17	PMValidity	read-only	Indicates the validity of the provided section layer coding violations value.
U32 olOSCCrntPMCVSValue	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.15	Unsigned32	read-write	The count of coding violations at the section layer of the received OSC signal.
olOSCCrntPMEntry	1.3.6.1.4.1.18070.2.2.1.16.12.1.1		not-accessible	The row entry object of the optical layer OSC current performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a current measurement interval for a given optical layer OSC object.
INI olOSCCrntPMESSInitialize	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.22	InitializeCmd	read-write	Used to initialize the value of the olOSCCrntPMESSValue object to 0.
DAT olOSCCrntPMESSTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.20	DateAndTime	read-only	The date and time stamp of the section layer errored seconds value.
PMV olOSCCrntPMESSValidity	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.21	PMValidity	read-only	Indicates the validity of the provided section layer errored seconds value.
U32 olOSCCrntPMESSValue	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.19	Unsigned32	read-write	The count of errored seconds at the section layer of the received OSC signal.
NUM olOSCCrntPMIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.5	PMIntervalType	not-accessible	The type of PM bin according to interval length.
INT olOSCCrntPMLineIdx	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.4	INTEGER	not-accessible	The line number of the OSC targeted for PMs.
DAT olOSCCrntPMOBRTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.13	DateAndTime	read-only	The date and time stamp of the optical back-reflected power value.
PMV olOSCCrntPMOBRValidity	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.14	PMValidity	read-only	Indicates the validity of the provided optical back-reflected power value.
FIX olOSCCrntPMOBRValue	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.12	FixedX10	read-only	The OSC optical back-reflected power.
DAT olOSCCrntPMOPRTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.7	DateAndTime	read-only	The date and time stamp of the optical power received value.
PMV olOSCCrntPMOPRValidity	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.8	PMValidity	read-only	Indicates the validity of the provided optical power received value.
FIX olOSCCrntPMOPRValue	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.6	FixedX10	read-only	The OSC optical power received on the Line port.
DAT olOSCCrntPMOPTTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.10	DateAndTime	read-only	The date and time stamp of the optical power transmitted value.
PMV olOSCCrntPMOPTValidity	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.11	PMValidity	read-only	Indicates the validity of the provided optical power transmitted value.
FIX olOSCCrntPMOPTValue	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.9	FixedX10	read-only	The OSC optical power transmitted at the output of the Line port.
INI olOSCCrntPMSEFSSInitialize	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.30	InitializeCmd	read-write	Used to initialize the value of the olOSCCrntPMSEFSSValue object to 0.
DAT olOSCCrntPMSEFSSTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.28	DateAndTime	read-only	The date and time stamp of the section layer severely errored framing seconds value.
PMV olOSCCrntPMSEFSSValidity	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.29	PMValidity	read-only	Indicates the validity of the provided section layer severely errored framing seconds value.
U32 olOSCCrntPMSEFSSValue	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.27	Unsigned32	read-write	The count of severely errored framing seconds at the section layer of the received OSC signal.
INI olOSCCrntPMSESSInitialize	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.26	InitializeCmd	read-write	Used to initialize the value of the olOSCCrntPMSESSValue object to 0.
DAT olOSCCrntPMSESSTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.24	DateAndTime	read-only	The date and time stamp of the section layer severely errored seconds value.
PMV olOSCCrntPMSESSValidity	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.25	PMValidity	read-only	Indicates the validity of the provided section layer severely errored seconds value.
U32 olOSCCrntPMSESSValue	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.23	Unsigned32	read-write	The count of severely errored seconds at the section layer of the received OSC signal.
INT olOSCCrntPMShelfIdx	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.2	INTEGER	not-accessible	The number of the shelf in which the optical layer OSC targeted for PMs is located.
INT olOSCCrntPMSlotIdx	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.3	INTEGER	not-accessible	The number of the slot in which the optical layer OSC targeted for PMs is located.
olOSCCrntPMTable	1.3.6.1.4.1.18070.2.2.1.16.12.1		not-accessible	A table of current performance monitoring statistics collected for the optical layer OSC objects on the NE.
INI olOSCCrntPMUASSInitialize	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.34	InitializeCmd	read-write	Used to initialize the value of the olOSCCrntPMUASSValue object to 0.
DAT olOSCCrntPMUASSTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.32	DateAndTime	read-only	The date and time stamp of the section layer unavailable seconds value.
PMV olOSCCrntPMUASSValidity	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.33	PMValidity	read-only	Indicates the validity of the provided section layer unavailable seconds value.
U32 olOSCCrntPMUASSValue	1.3.6.1.4.1.18070.2.2.1.16.12.1.1.31	Unsigned32	read-write	The count of unavailable seconds at the section layer of the received OSC signal.
STR olOSCCustom1	1.3.6.1.4.1.18070.2.2.1.16.6.1.11	DisplayString	read-write	A variable length text string for operating company use.
STR olOSCCustom2	1.3.6.1.4.1.18070.2.2.1.16.6.1.12	DisplayString	read-write	A variable length text string for operating company use.
STR olOSCCustom3	1.3.6.1.4.1.18070.2.2.1.16.6.1.13	DisplayString	read-write	A variable length text string for operating company use.
olOSCEntry	1.3.6.1.4.1.18070.2.2.1.16.6.1		not-accessible	The conceptual row object of the optical laye OSC table.
NTF olOSCEqlzContCommClear	1.3.6.1.4.1.18070.2.2.2.2.28.1.0.14			A previously active optical layer OSC Equalization Control Communications condition has cleared.
NTF olOSCEqlzContCommCond	1.3.6.1.4.1.18070.2.2.2.2.28.1.0.13			Bi-directional control communications with the node at the opposite end of the equalization section have failed.
olOSCEvtNotifications	1.3.6.1.4.1.18070.2.2.2.1.33.1
INT olOSCExpFEDegr	1.3.6.1.4.1.18070.2.2.1.16.6.1.18	INTEGER	read-write	The expected far-end node optical layer degree number.
INT olOSCExpFEGrp	1.3.6.1.4.1.18070.2.2.1.16.6.1.17	INTEGER	read-write	The expected far-end node optical layer group number.
IP olOSCExpFEIPAddr	1.3.6.1.4.1.18070.2.2.1.16.6.1.16	IpAddress	read-write	The expected far-end node IP address.
STR olOSCExpFESysName	1.3.6.1.4.1.18070.2.2.1.16.6.1.15	DisplayString	read-write	The expected far-end node system identifier.
NTF olOSCFarEndIdMismatchClear	1.3.6.1.4.1.18070.2.2.2.2.28.1.0.8			A previously active optical layer OSC Far End Identification Mismatch condition has cleared.
NTF olOSCFarEndIdMismatchCond	1.3.6.1.4.1.18070.2.2.2.2.28.1.0.7			The identifying attributes received for the far-end node do not match the expected identifying attributes.
NTF olOSCFarEndNodeCnfgInconsistentClear	1.3.6.1.4.1.18070.2.2.2.2.28.1.0.10			A previously active optical layer OSC Far End Node Configuration Inconsistent condition has cleared.
NTF olOSCFarEndNodeCnfgInconsistentCond	1.3.6.1.4.1.18070.2.2.2.2.28.1.0.9			The optical layer group configuration type for the far-end node is inconsistent with the configuration type of the local optical layer group.
INT olOSCFEDegr	1.3.6.1.4.1.18070.2.2.1.16.6.1.22	INTEGER	read-only	The actual far-end node optical layer degree number.
INT olOSCFEGrp	1.3.6.1.4.1.18070.2.2.1.16.6.1.21	INTEGER	read-only	The actual far-end node optical layer group number.
OLG olOSCFEGrpType	1.3.6.1.4.1.18070.2.2.1.16.6.1.23	OlGroupType	read-only	The actual far-end node optical layer group configuration type.
INT olOSCFEIMMon	1.3.6.1.4.1.18070.2.2.1.16.6.1.14	INTEGER	read-write	This object is used to control the monitoring of the Far End Node Mismatch Identifier condition. When enabled, the received far-end node identification attributes will be monitored and compared to the expected far-end node identification attribites, and a condition is raised if attributes do no match.
IP olOSCFEIPAddr	1.3.6.1.4.1.18070.2.2.1.16.6.1.20	IpAddress	read-only	The actual far-end node IP address.
STR olOSCFESysName	1.3.6.1.4.1.18070.2.2.1.16.6.1.19	DisplayString	read-only	The actual far-end node system identifier.
CPT olOSCHistPMCpTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.1	CpType	not-accessible	The type of circuit pack on which the optical layer OSC targeted for PMs is located.
INI olOSCHistPMCVSInitialize	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.19	InitializeCmd	read-write	Used to initialize the value of the olOSCHistPMCVSValue object to 0.
DAT olOSCHistPMCVSTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.17	DateAndTime	read-only	The date and time stamp of the section layer coding violations value.
PMV olOSCHistPMCVSValidity	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.18	PMValidity	read-only	Indicates the validity of the provided section layer coding violations value.
U32 olOSCHistPMCVSValue	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.16	Unsigned32	read-write	The count of coding violations at the section layer of the received OSC signal.
olOSCHistPMEntry	1.3.6.1.4.1.18070.2.2.1.16.12.2.1		not-accessible	The row entry object of the optical layer OSC historical performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a historical measurement interval for a given optical layer OSC object.
INI olOSCHistPMESSInitialize	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.23	InitializeCmd	read-write	Used to initialize the value of the olOSCHistPMESSValue object to 0.
DAT olOSCHistPMESSTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.21	DateAndTime	read-only	The date and time stamp of the section layer errored seconds value.
PMV olOSCHistPMESSValidity	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.22	PMValidity	read-only	Indicates the validity of the provided section layer errored seconds value.
U32 olOSCHistPMESSValue	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.20	Unsigned32	read-write	The count of errored seconds at the section layer of the received OSC signal.
INT olOSCHistPMIntervalIdx	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.6	INTEGER	not-accessible	The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
NUM olOSCHistPMIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.5	PMIntervalType	not-accessible	The type of PM bin according to interval length.
INT olOSCHistPMLineIdx	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.4	INTEGER	not-accessible	The line number of the OSC targeted for PMs.
DAT olOSCHistPMOBRTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.14	DateAndTime	read-only	The date and time stamp of the optical back-reflected power value.
PMV olOSCHistPMOBRValidity	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.15	PMValidity	read-only	Indicates the validity of the provided optical back-reflected power value.
FIX olOSCHistPMOBRValue	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.13	FixedX10	read-only	The OSC optical back-reflected power.
DAT olOSCHistPMOPRTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.8	DateAndTime	read-only	The date and time stamp of the optical power received value.
PMV olOSCHistPMOPRValidity	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.9	PMValidity	read-only	Indicates the validity of the provided optical power received value.
FIX olOSCHistPMOPRValue	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.7	FixedX10	read-only	The OSC optical power received on the Line port.
DAT olOSCHistPMOPTTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.11	DateAndTime	read-only	The date and time stamp of the optical power transmitted value.
PMV olOSCHistPMOPTValidity	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.12	PMValidity	read-only	Indicates the validity of the provided optical power transmitted value.
FIX olOSCHistPMOPTValue	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.10	FixedX10	read-only	The OSC optical power transmitted at the output of the Line port.
INI olOSCHistPMSEFSSInitialize	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.31	InitializeCmd	read-write	Used to initialize the value of the olOSCHistPMSEFSSValue object to 0.
DAT olOSCHistPMSEFSSTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.29	DateAndTime	read-only	The date and time stamp of the section layer severely errored framing seconds value.
PMV olOSCHistPMSEFSSValidity	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.30	PMValidity	read-only	Indicates the validity of the provided section layer severely errored framing seconds value.
U32 olOSCHistPMSEFSSValue	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.28	Unsigned32	read-write	The count of severely errored framing seconds at the section layer of the received OSC signal.
INI olOSCHistPMSESSInitialize	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.27	InitializeCmd	read-write	Used to initialize the value of the olOSCHistPMSESSValue object to 0.
DAT olOSCHistPMSESSTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.25	DateAndTime	read-only	The date and time stamp of the section layer severely errored seconds value.
PMV olOSCHistPMSESSValidity	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.26	PMValidity	read-only	Indicates the validity of the provided section layer severely errored seconds value.
U32 olOSCHistPMSESSValue	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.24	Unsigned32	read-write	The count of severely errored seconds at the section layer of the received OSC signal.
INT olOSCHistPMShelfIdx	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.2	INTEGER	not-accessible	The number of the shelf in which the optical layer OSC targeted for PMs is located.
INT olOSCHistPMSlotIdx	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.3	INTEGER	not-accessible	The number of the slot in which the optical layer OSC targeted for PMs is located.
olOSCHistPMTable	1.3.6.1.4.1.18070.2.2.1.16.12.2		not-accessible	A table of historical performance monitoring statistics collected for the optical layer OSC objects on the NE.
INI olOSCHistPMUASSInitialize	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.35	InitializeCmd	read-write	Used to initialize the value of the olOSCHistPMUASSValue object to 0.
DAT olOSCHistPMUASSTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.33	DateAndTime	read-only	The date and time stamp of the section layer unavailable seconds value.
PMV olOSCHistPMUASSValidity	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.34	PMValidity	read-only	Indicates the validity of the provided section layer unavailable seconds value.
U32 olOSCHistPMUASSValue	1.3.6.1.4.1.18070.2.2.1.16.12.2.1.32	Unsigned32	read-write	The count of unavailable seconds at the section layer of the received OSC signal.
STR olOSCId	1.3.6.1.4.1.18070.2.2.1.16.6.1.10	DisplayString	read-write	Textual data recorded by the user to briefly identify the OSC object in a manner useful to the user.
INT olOSCLineIdx	1.3.6.1.4.1.18070.2.2.1.16.6.1.4	INTEGER	not-accessible	The line number of the OSC.
NTF olOSCLossOfFrameClear	1.3.6.1.4.1.18070.2.2.2.2.28.1.0.4			A previously active optical layer OSC Loss of Frame condition has cleared.
NTF olOSCLossOfFrameCond	1.3.6.1.4.1.18070.2.2.2.2.28.1.0.3			There input OSC signal cannot be framed.
NTF olOSCLossOfLightRxClear	1.3.6.1.4.1.18070.2.2.2.2.28.1.0.2			A previously active optical layer OSC Receive Loss of Light condition has cleared.
NTF olOSCLossOfLightRxCond	1.3.6.1.4.1.18070.2.2.2.2.28.1.0.1			There is no input signal detected for the identified OSC.
NTF olOSCLossOfLightTxClear	1.3.6.1.4.1.18070.2.2.2.2.28.1.0.6			A previously active optical layer OSC Transmit Loss of Light condition has cleared.
NTF olOSCLossOfLightTxCond	1.3.6.1.4.1.18070.2.2.2.2.28.1.0.5			There is no transmitted signal power detected for the identified OSC.
OPE olOSCOperStatQlfr	1.3.6.1.4.1.18070.2.2.1.16.6.1.7	OperStatQlfr	read-only	This is a textual list of qualifiers about the reported operational status of the OSC.
OPE olOSCOperStatus	1.3.6.1.4.1.18070.2.2.1.16.6.1.6	OperStatus	read-only	The reported operational status of the OSC.
NTF olOSCOpticalBackReflHighThClear	1.3.6.1.4.1.18070.2.2.2.2.28.1.0.18			A previously active optical layer OSC Optical Back Reflection High Threshold condition has cleared.
NTF olOSCOpticalBackReflHighThCond	1.3.6.1.4.1.18070.2.2.2.2.28.1.0.17			The measured optical back reflection of the transmitted OSC signal exceeds the high threshold.
NTF olOSCOpticalBackReflOutOfSpecClear	1.3.6.1.4.1.18070.2.2.2.2.28.1.0.16			A previously active optical layer OSC Optical Back Reflection Out of Specification condition has cleared.
NTF olOSCOpticalBackReflOutOfSpecCond	1.3.6.1.4.1.18070.2.2.2.2.28.1.0.15			The measured optical back reflection of the transmitted OSC signal exceeds the specified maximum.
CPT olOSCPMThresholdCpTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.12.3.1.1	CpType	not-accessible	The type of circuit pack on which the optical layer OSC targeted for PM thresholds is located.
U32 olOSCPMThresholdCVSValue	1.3.6.1.4.1.18070.2.2.1.16.12.3.1.6	Unsigned32	read-write	The threshold for the count of coding violations at the section layer.
olOSCPMThresholdEntry	1.3.6.1.4.1.18070.2.2.1.16.12.3.1		not-accessible	The row entry object of the optical layer OSC performance monitoring threshold table. Each row of this table contains a set of PM thresholds for a given interval type that applies to an individual optical layer OSC object.
U32 olOSCPMThresholdESSValue	1.3.6.1.4.1.18070.2.2.1.16.12.3.1.7	Unsigned32	read-write	The threshold for the count of errored seconds at the section layer.
NUM olOSCPMThresholdIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.12.3.1.5	PMIntervalType	not-accessible	The type of PM bin according to interval length. Thresholds are supported for the 15-minute and 1-day PM bins only.
INT olOSCPMThresholdLineIdx	1.3.6.1.4.1.18070.2.2.1.16.12.3.1.4	INTEGER	not-accessible	The line number of the OSC targeted for PM thresholds.
U32 olOSCPMThresholdSEFSSValue	1.3.6.1.4.1.18070.2.2.1.16.12.3.1.9	Unsigned32	read-write	The threshold for the count of severely errored framing seconds at the section layer.
U32 olOSCPMThresholdSESSValue	1.3.6.1.4.1.18070.2.2.1.16.12.3.1.8	Unsigned32	read-write	The threshold for the count of severely errored seconds at the section layer.
INT olOSCPMThresholdShelfIdx	1.3.6.1.4.1.18070.2.2.1.16.12.3.1.2	INTEGER	not-accessible	The number of the shelf in which the optical layer OSC targeted for PM thresholds is located.
INT olOSCPMThresholdSlotIdx	1.3.6.1.4.1.18070.2.2.1.16.12.3.1.3	INTEGER	not-accessible	The number of the slot in which the optical layer OSC targeted for PM thresholds is located.
olOSCPMThresholdTable	1.3.6.1.4.1.18070.2.2.1.16.12.3		not-accessible	A table of threshold levels for performance monitoring counter values on Optical Layer OSC objects, that are used in the generation of threshold crossing alerts.
U32 olOSCPMThresholdUASSValue	1.3.6.1.4.1.18070.2.2.1.16.12.3.1.10	Unsigned32	read-write	The threshold for the count of unavailable seconds at the section layer.
ROW olOSCRowStatus	1.3.6.1.4.1.18070.2.2.1.16.6.1.100	RowStatus	accessible-for-notify	The Optical Layer OSC table RowStatus object is not readable or writeable because all entries in the table are automatically created and deleted when the supporting DLA or ROB equipment is provisioned. This optical layer OSC row status object is used only in database change notifications to indicate if the row has been created or deleted.
INT olOSCShelfIdx	1.3.6.1.4.1.18070.2.2.1.16.6.1.2	INTEGER	not-accessible	The number of the shelf in which the OSC is located.
INT olOSCSlotIdx	1.3.6.1.4.1.18070.2.2.1.16.6.1.3	INTEGER	not-accessible	The number of the slot in which the OSC is located.
NTF olOSCSpanContCommClear	1.3.6.1.4.1.18070.2.2.2.2.28.1.0.12			A previously active optical layer OSC Section Control Communications condition has cleared.
NTF olOSCSpanContCommCond	1.3.6.1.4.1.18070.2.2.2.2.28.1.0.11			Bi-directional control communications with the node at the opposite end of the span section have failed.
NTF olOSCStatusChangeEvt	1.3.6.1.4.1.18070.2.2.2.1.33.1.0.1			Notification of a change in the operational status or operational status qualifier or an optical layer OSC facility.
olOSCTable	1.3.6.1.4.1.18070.2.2.1.16.6		not-accessible	This table lists all OSC managed objects that have been created on the optical layer equipment modules.
NTF olOSCTcaEvt	1.3.6.1.4.1.18070.2.2.2.1.33.1.0.2			This trap provides a threshold crossing alert for a performance monitoring statistic on an optical layer OSC facility.
olPerformance	1.3.6.1.4.1.18070.2.2.1.16.12
INT olPortActCnxDegree	1.3.6.1.4.1.18070.2.2.1.16.4.1.18	INTEGER	accessible-for-notify	The actual degree number of the equipment that is inter-connected on the port.
NTF olPortAPSDClear	1.3.6.1.4.1.18070.2.2.2.2.28.2.0.10			A previously active optical layer port Automatic Power Shutdown condition has cleared.
NTF olPortAPSDCond	1.3.6.1.4.1.18070.2.2.2.2.28.2.0.9			An automatic power shutdown has been automatically operated on the optical layer port for safety reasons.
NTF olPortBackwardDefectIndClear	1.3.6.1.4.1.18070.2.2.2.2.28.2.0.14			A previously active optical layer port Backward Defect Indication condition has cleared.
NTF olPortBackwardDefectIndCond	1.3.6.1.4.1.18070.2.2.2.2.28.2.0.13			A Backward Defect Indication has been received on the optical layer port input.
NTF olPortChannelCountDeficiencyClear	1.3.6.1.4.1.18070.2.2.2.2.28.2.0.16			A previously active optical layer port Channel Count Deficiency condition has cleared.
NTF olPortChannelCountDeficiencyCond	1.3.6.1.4.1.18070.2.2.2.2.28.2.0.15			A channel count deficiency condition has been raised against the port. This indicates that the number of channels received on the port is less than the number required to maintain stable optical control given the high span loss level detected on the receive span fiber.
olPortCondNotifications	1.3.6.1.4.1.18070.2.2.2.2.28.2
NTF olPortConnectionMismatchClear	1.3.6.1.4.1.18070.2.2.2.2.28.2.0.18			A previously active optical layer port Connection Mismatch condition has cleared.
NTF olPortConnectionMismatchCond	1.3.6.1.4.1.18070.2.2.2.2.28.2.0.17			The identified optical layer port is incorrectly connected and must be re-connected to a different remote end port.
NTF olPortConnectionValidationTimeoutClear	1.3.6.1.4.1.18070.2.2.2.2.28.2.0.20			A previously active optical layer port Connection Validation Timeout condition has cleared.
NTF olPortConnectionValidationTimeoutCond	1.3.6.1.4.1.18070.2.2.2.2.28.2.0.19			Connection validation could not be performed on the identified optical layer port, which may mean that the port is incorrectly connected.
CPT olPortCpTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.4.1.1	CpType	not-accessible	The type of circuit pack on which the optical layer port is located.
CPT olPortCrntPMCpTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.1	CpType	not-accessible	The type of circuit pack on which the port targeted for PMs is located.
olPortCrntPMEntry	1.3.6.1.4.1.18070.2.2.1.16.12.4.1		not-accessible	The row entry object of the optical layer port current performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a current measurement interval for a given optical layer port.
INT olPortCrntPMIdx	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.5	INTEGER	not-accessible	The number of the port of the specified port type targeted for PMs.
INI olPortCrntPMInitializeAll	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.43	InitializeCmd	read-write	Used to initialize all binned PM values for a given entry in the table.
NUM olPortCrntPMIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.6	PMIntervalType	not-accessible	The type of PM bin according to interval length.
DAT olPortCrntPMLossRxTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.38	DateAndTime	read-only	The date and time stamp of the receive loss value.
PMV olPortCrntPMLossRxValidity	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.39	PMValidity	read-only	Indicates the validity of the provided receive loss value.
FIX olPortCrntPMLossRxValue	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.37	FixedX10	read-only	The optical power loss measured on the port in the receive direction. For a Line port, this represents the span loss. For a DCM port, this is the DCM loss. For a client port, this is the loss of the receive inter-connection fiber.
DAT olPortCrntPMLossTxTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.41	DateAndTime	read-only	The date and time stamp of the transmit loss value.
PMV olPortCrntPMLossTxValidity	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.42	PMValidity	read-only	Indicates the validity of the provided transmit loss value.
FIX olPortCrntPMLossTxValue	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.40	FixedX10	read-only	The optical power loss measured on the port in the transmit direction. For a Line port, this represents the far-end span loss. For a client port, this is the loss of the transmit inter-connection fiber.
DAT olPortCrntPMOPRAvgTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.17	DateAndTime	read-only	The date and time stamp of the average optical power received value.
PMV olPortCrntPMOPRAvgValidity	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.18	PMValidity	read-only	Indicates the validity of the provided average optical power received value.
FIX olPortCrntPMOPRAvgValue	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.16	FixedX10	read-only	The average optical power received on the port over the interval.
DAT olPortCrntPMOPRMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.14	DateAndTime	read-only	The date and time stamp of the maximum optical power received value.
PMV olPortCrntPMOPRMaxValidity	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.15	PMValidity	read-only	Indicates the validity of the provided maximum optical power received value.
FIX olPortCrntPMOPRMaxValue	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.13	FixedX10	read-only	The maximum optical power received on the port over the interval.
DAT olPortCrntPMOPRMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.11	DateAndTime	read-only	The date and time stamp of the minimum optical power received value.
PMV olPortCrntPMOPRMinValidity	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.12	PMValidity	read-only	Indicates the validity of the provided minimum optical power received value.
FIX olPortCrntPMOPRMinValue	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.10	FixedX10	read-only	The minimum optical power received on the port over the interval.
DAT olPortCrntPMOPRStdDevTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.20	DateAndTime	read-only	The date and time stamp of the standard deviation value for the optical power received.
PMV olPortCrntPMOPRStdDevValidity	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.21	PMValidity	read-only	Indicates the validity of the provided standard deviation value for the optical power received.
FIX olPortCrntPMOPRStdDevValue	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.19	FixedX10	read-only	The standard deviation from the average of the optical power received on the port over the interval.
DAT olPortCrntPMOPRTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.8	DateAndTime	read-only	The date and time stamp of the instantaneous optical power received value.
PMV olPortCrntPMOPRValidity	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.9	PMValidity	read-only	Indicates the validity of the provided instantaneous optical power received value.
FIX olPortCrntPMOPRValue	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.7	FixedX10	read-only	The instantaneous optical power received on the port.
DAT olPortCrntPMOPTAvgTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.32	DateAndTime	read-only	The date and time stamp of the average optical power transmitted value.
PMV olPortCrntPMOPTAvgValidity	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.33	PMValidity	read-only	Indicates the validity of the provided average optical power transmitted value.
FIX olPortCrntPMOPTAvgValue	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.31	FixedX10	read-only	The average optical power transmitted on the port over the interval.
DAT olPortCrntPMOPTMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.29	DateAndTime	read-only	The date and time stamp of the maximum optical power transmitted value.
PMV olPortCrntPMOPTMaxValidity	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.30	PMValidity	read-only	Indicates the validity of the provided maximum optical power transmitted value.
FIX olPortCrntPMOPTMaxValue	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.28	FixedX10	read-only	The maximum optical power transmitted on the port over the interval.
DAT olPortCrntPMOPTMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.26	DateAndTime	read-only	The date and time stamp of the minimum optical power transmitted value.
PMV olPortCrntPMOPTMinValidity	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.27	PMValidity	read-only	Indicates the validity of the provided minimum optical power transmitted value.
FIX olPortCrntPMOPTMinValue	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.25	FixedX10	read-only	The minimum optical power transmitted on the port over the interval.
DAT olPortCrntPMOPTStdDevTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.35	DateAndTime	read-only	The date and time stamp of the standard deviation value for the optical power transmitted.
PMV olPortCrntPMOPTStdDevValidity	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.36	PMValidity	read-only	Indicates the validity of the provided standard deviation value for the optical power transmitted.
FIX olPortCrntPMOPTStdDevValue	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.34	FixedX10	read-only	The standard deviation from the average of the optical power transmitted on the port over the interval.
DAT olPortCrntPMOPTTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.23	DateAndTime	read-only	The date and time stamp of the instantaneous optical power transmitted value.
PMV olPortCrntPMOPTValidity	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.24	PMValidity	read-only	Indicates the validity of the provided instantaneous optical power transmitted value.
FIX olPortCrntPMOPTValue	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.22	FixedX10	read-only	The instantaneous optical power transmitted on the port.
INT olPortCrntPMShelfIdx	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.2	INTEGER	not-accessible	The number of the shelf in which the port targeted for PMs is located.
INT olPortCrntPMSlotIdx	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.3	INTEGER	not-accessible	The number of the slot in which the port targeted for PMs is located.
olPortCrntPMTable	1.3.6.1.4.1.18070.2.2.1.16.12.4		not-accessible	A table of current performance monitoring statistics collected for ports on equipment modules assigned to optical layer groupings.
OLP olPortCrntPMTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.12.4.1.4	OlPortType	not-accessible	The type of port targeted for PMs.
STR olPortCustom1	1.3.6.1.4.1.18070.2.2.1.16.4.1.7	DisplayString	read-create	A variable length text string for operating company use.
STR olPortCustom2	1.3.6.1.4.1.18070.2.2.1.16.4.1.8	DisplayString	read-create	A variable length text string for operating company use.
STR olPortCustom3	1.3.6.1.4.1.18070.2.2.1.16.4.1.9	DisplayString	read-create	A variable length text string for operating company use.
INT olPortDWDMType	1.3.6.1.4.1.18070.2.2.1.16.4.1.10	INTEGER	read-create	Used to configure the port for the type of DWDM composite to which it is inter-connection. By default, all ports are inter-connected with native optical layer DWDM composites. For some configurations, client port 2 of ROB2 pack and ROB4 modules may be configured for alien DWDM type.
olPortEntry	1.3.6.1.4.1.18070.2.2.1.16.4.1		not-accessible	The conceptual row object of the optical layer port table.
olPortEvtNotifications	1.3.6.1.4.1.18070.2.2.2.1.33.2
INT olPortExpCnxDegree	1.3.6.1.4.1.18070.2.2.1.16.4.1.17	INTEGER	accessible-for-notify	The expected degree number of the equipment that is inter-connected on the port.
FIX olPortFrequency	1.3.6.1.4.1.18070.2.2.1.16.4.1.13	FixedX100	read-only	The frequency of the channel carried by the port. This object exists only in table entries for channel ports on Mux/Demux modules.
INT olPortGrid	1.3.6.1.4.1.18070.2.2.1.16.4.1.11	INTEGER	read-write	The DWDM grid spacing on the port.
CPT olPortHistPMCpTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.1	CpType	not-accessible	The type of circuit pack on which the port targeted for PMs is located.
olPortHistPMEntry	1.3.6.1.4.1.18070.2.2.1.16.12.5.1		not-accessible	The row entry object of the Optical Layer Port Historical Performance Monitoring table. Each row of this table contains a full set of PM statistics and related data for an historical measurement interval for a given optical layer port.
INT olPortHistPMIdx	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.5	INTEGER	not-accessible	The number of the port of the specified port type targeted for PMs.
INI olPortHistPMInitializeAll	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.44	InitializeCmd	read-write	Used to initialize all binned PM values for a given entry in the table.
INT olPortHistPMIntervalIdx	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.7	INTEGER	not-accessible	The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
NUM olPortHistPMIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.6	PMIntervalType	not-accessible	The type of PM bin according to interval length.
DAT olPortHistPMLossRxTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.39	DateAndTime	read-only	The date and time stamp of the receive loss value.
PMV olPortHistPMLossRxValidity	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.40	PMValidity	read-only	Indicates the validity of the provided receive loss value.
FIX olPortHistPMLossRxValue	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.38	FixedX10	read-only	The optical power loss measured on the port in the receive direction. For a Line port, this represents the span loss. For a DCM port, this is the DCM loss. For a client port, this is the loss of the receive inter-connection fiber.
DAT olPortHistPMLossTxTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.42	DateAndTime	read-only	The date and time stamp of the transmit loss value.
PMV olPortHistPMLossTxValidity	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.43	PMValidity	read-only	Indicates the validity of the provided transmit loss value.
FIX olPortHistPMLossTxValue	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.41	FixedX10	read-only	The optical power loss measured on the port in the transmit direction. For a Line port, this represents the far-end span loss. For a client port, this is the loss of the transmit inter-connection fiber.
DAT olPortHistPMOPRAvgTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.18	DateAndTime	read-only	The date and time stamp of the average optical power received value.
PMV olPortHistPMOPRAvgValidity	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.19	PMValidity	read-only	Indicates the validity of the provided average optical power received value.
FIX olPortHistPMOPRAvgValue	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.17	FixedX10	read-only	The average optical power received on the port over the interval.
DAT olPortHistPMOPRMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.15	DateAndTime	read-only	The date and time stamp of the maximum optical power received value.
PMV olPortHistPMOPRMaxValidity	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.16	PMValidity	read-only	Indicates the validity of the provided maximum optical power received value.
FIX olPortHistPMOPRMaxValue	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.14	FixedX10	read-only	The maximum optical power received on the port over the interval.
DAT olPortHistPMOPRMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.12	DateAndTime	read-only	The date and time stamp of the minimum optical power received value.
PMV olPortHistPMOPRMinValidity	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.13	PMValidity	read-only	Indicates the validity of the provided minimum optical power received value.
FIX olPortHistPMOPRMinValue	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.11	FixedX10	read-only	The minimum optical power received on the port over the interval.
DAT olPortHistPMOPRStdDevTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.21	DateAndTime	read-only	The date and time stamp of the standard deviation value for the optical power received.
PMV olPortHistPMOPRStdDevValidity	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.22	PMValidity	read-only	Indicates the validity of the provided standard deviation value for the optical power received.
FIX olPortHistPMOPRStdDevValue	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.20	FixedX10	read-only	The standard deviation from the average of the optical power received on the port over the interval.
DAT olPortHistPMOPRTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.9	DateAndTime	read-only	The date and time stamp of the instantaneous optical power received value.
PMV olPortHistPMOPRValidity	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.10	PMValidity	read-only	Indicates the validity of the provided instantaneous optical power received value.
FIX olPortHistPMOPRValue	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.8	FixedX10	read-only	The instantaneous optical power received on the port.
DAT olPortHistPMOPTAvgTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.33	DateAndTime	read-only	The date and time stamp of the average optical power transmitted value.
PMV olPortHistPMOPTAvgValidity	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.34	PMValidity	read-only	Indicates the validity of the provided average optical power transmitted value.
FIX olPortHistPMOPTAvgValue	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.32	FixedX10	read-only	The average optical power transmitted on the port over the interval.
DAT olPortHistPMOPTMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.30	DateAndTime	read-only	The date and time stamp of the maximum optical power transmitted value.
PMV olPortHistPMOPTMaxValidity	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.31	PMValidity	read-only	Indicates the validity of the provided maximum optical power transmitted value.
FIX olPortHistPMOPTMaxValue	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.29	FixedX10	read-only	The maximum optical power transmitted on the port over the interval.
DAT olPortHistPMOPTMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.27	DateAndTime	read-only	The date and time stamp of the minimum optical power transmitted value.
PMV olPortHistPMOPTMinValidity	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.28	PMValidity	read-only	Indicates the validity of the provided minimum optical power transmitted value.
FIX olPortHistPMOPTMinValue	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.26	FixedX10	read-only	The minimum optical power transmitted on the port over the interval.
DAT olPortHistPMOPTStdDevTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.36	DateAndTime	read-only	The date and time stamp of the standard deviation value for the optical power transmitted.
PMV olPortHistPMOPTStdDevValidity	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.37	PMValidity	read-only	Indicates the validity of the provided standard deviation value for the optical power transmitted.
FIX olPortHistPMOPTStdDevValue	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.35	FixedX10	read-only	The standard deviation from the average of the optical power transmitted on the port over the interval.
DAT olPortHistPMOPTTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.24	DateAndTime	read-only	The date and time stamp of the instantaneous optical power transmitted value.
PMV olPortHistPMOPTValidity	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.25	PMValidity	read-only	Indicates the validity of the provided instantaneous optical power transmitted value.
FIX olPortHistPMOPTValue	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.23	FixedX10	read-only	The instantaneous optical power transmitted on the port.
INT olPortHistPMShelfIdx	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.2	INTEGER	not-accessible	The number of the shelf in which the port targeted for PMs is located.
INT olPortHistPMSlotIdx	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.3	INTEGER	not-accessible	The number of the slot in which the port targeted for PMs is located.
olPortHistPMTable	1.3.6.1.4.1.18070.2.2.1.16.12.5		not-accessible	A table of historical performance monitoring statistics collected for optical layer ports.
OLP olPortHistPMTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.12.5.1.4	OlPortType	not-accessible	The type of port targeted for PMs.
STR olPortId	1.3.6.1.4.1.18070.2.2.1.16.4.1.6	DisplayString	read-create	Textual data recorded by the user to briefly identify the provisioned optical layer port in a manner useful to the user.
INT olPortIdx	1.3.6.1.4.1.18070.2.2.1.16.4.1.5	INTEGER	not-accessible	The number of the optical layer port of the specified port type.
NTF olPortLossOfLightRxClear	1.3.6.1.4.1.18070.2.2.2.2.28.2.0.4			A previously active optical layer port Receive Loss of Light condition has cleared.
NTF olPortLossOfLightRxCond	1.3.6.1.4.1.18070.2.2.2.2.28.2.0.3			There is no received optical power detected for the port.
NTF olPortLossRxHighThClear	1.3.6.1.4.1.18070.2.2.2.2.28.2.0.8			A previously active optical layer port Receive Loss High Threshold condition has cleared.
NTF olPortLossRxHighThCond	1.3.6.1.4.1.18070.2.2.2.2.28.2.0.7			The optical power loss measured over the span terminating on the line port in the receive direction is above the high threshold level.
NTF olPortLossRxOutOfSpecClear	1.3.6.1.4.1.18070.2.2.2.2.28.2.0.6			A previously active optical layer port Receive Loss out of Specification condition has cleared.
NTF olPortLossRxOutOfSpecCond	1.3.6.1.4.1.18070.2.2.2.2.28.2.0.5			The optical power loss measured over the span or fiber connection terminating on the port in the receive direction is outside the specification range.
OPE olPortOperStatQlfr	1.3.6.1.4.1.18070.2.2.1.16.4.1.15	OperStatQlfr	read-only	This is a textual list of qualifiers about the reported operational status of the optical layer port.
OPE olPortOperStatus	1.3.6.1.4.1.18070.2.2.1.16.4.1.14	OperStatus	read-only	The reported operational status of the optical layer port.
NTF olPortPayloadMissingIndClear	1.3.6.1.4.1.18070.2.2.2.2.28.2.0.12			A previously active optical layer port Payload Missing Indication condition has cleared.
NTF olPortPayloadMissingIndCond	1.3.6.1.4.1.18070.2.2.2.2.28.2.0.11			A Payload Missing Indication has been received on the optical layer port input.
NTF olPortPowerOutOfSpecRxClear	1.3.6.1.4.1.18070.2.2.2.2.28.2.0.2			A previously active optical layer port Received Power Out Of Specification condition has cleared.
NTF olPortPowerOutOfSpecRxCond	1.3.6.1.4.1.18070.2.2.2.2.28.2.0.1			The power received on the optical port is outside the operating range.
STR olPortRemoteId	1.3.6.1.4.1.18070.2.2.1.16.4.1.16	DisplayString	read-create	Identifies the remote node and port to which the optical layer port is connected, in the format prescribed by the PSM network management system.
ROW olPortRowStatus	1.3.6.1.4.1.18070.2.2.1.16.4.1.100	RowStatus	read-create	Used to control the addition and deletion of entries in the Optical Layer Port table. Manual creation and deletion is supported only for the client 2 port on ROB packs assigned to a Channel-equalizing Terminal or Reconfigurable Add/Drop node group.
INT olPortShelfIdx	1.3.6.1.4.1.18070.2.2.1.16.4.1.2	INTEGER	not-accessible	The number of the shelf on which the optical layer port is located.
INT olPortSlotIdx	1.3.6.1.4.1.18070.2.2.1.16.4.1.3	INTEGER	not-accessible	The number of the slot on which the optical layer port is located.
NTF olPortStatusChangeEvt	1.3.6.1.4.1.18070.2.2.2.1.33.2.0.1			Notification of a change in the operational status or operational status qualifier or an optical layer port.
olPortTable	1.3.6.1.4.1.18070.2.2.1.16.4		not-accessible	This table lists all managed ports on equipment modules assigned to optical layer groupings.
OLP olPortTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.4.1.4	OlPortType	not-accessible	The type of optical layer port according to the function it provides.
FIX olPortWavelength	1.3.6.1.4.1.18070.2.2.1.16.4.1.12	FixedX100	read-only	The wavelength of the channel carried by the port. This object exists only in table entries for channel ports on Mux/Demux modules.
HOU wchActAutoEnableTimer	1.3.6.1.4.1.18070.2.2.1.16.10.1.11	HoursAndMinutes	read-only	Indicates the time remaining on the auto-enable timer if it is actively counting down. Otherwise, the value returned is 000-00.
ADM wchAdminStatus	1.3.6.1.4.1.18070.2.2.1.16.10.1.7	AdminStatus	read-write	The administrative status of the wavelength channel. The default value is autoEnabled if the supporting WDM is enabled or autoEnabled, otherwise it is disabled.
NTF wchAISClear	1.3.6.1.4.1.18070.2.2.2.2.28.4.0.12			A previously active wavelength channel alarm indication signal condition has cleared.
NTF wchAISCond	1.3.6.1.4.1.18070.2.2.2.2.28.4.0.11			An alarm indication signal for the wavelength channel has been received from the far-end node of the line span.
HOU wchAutoEnableTimer	1.3.6.1.4.1.18070.2.2.1.16.10.1.10	HoursAndMinutes	read-write	Specifies the auto-enable timer for the targeted wavelength channel. This value only applies if the wchAdminStatus object is set to autoEnabled, in which case the default value is 008-00, otherwise, it is 000-00.
INT wchBitrate	1.3.6.1.4.1.18070.2.2.1.16.10.1.16	INTEGER	read-write	The bitrate of the signal carried by the wavelength channel. A value of tenGig applies to all signal bitrates of 10Gb/sec or less.
wchCondNotifications	1.3.6.1.4.1.18070.2.2.2.2.28.4
CPT wchCpTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.10.1.1	CpType	not-accessible	The type of circuit pack on which the wavelength channel is located.
CPT wchCrntPMCpTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.12.6.1.1	CpType	not-accessible	The type of circuit pack on which the wavelength channel targeted for PMs is located.
wchCrntPMEntry	1.3.6.1.4.1.18070.2.2.1.16.12.6.1		not-accessible	The row entry object of the Wavelength Channel Current Performance Monitoring table. Each row of this table contains a full set of PM statistics and related data for a current measurement interval for a wavelength channel object in an optical layer grouping.
INT wchCrntPMIdx	1.3.6.1.4.1.18070.2.2.1.16.12.6.1.6	INTEGER	not-accessible	The number of the wavelength channel targeted for PMs.
NUM wchCrntPMIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.12.6.1.7	PMIntervalType	not-accessible	The type of PM bin according to interval length.
INI wchCrntPMOPRMaxInitialize	1.3.6.1.4.1.18070.2.2.1.16.12.6.1.18	InitializeCmd	read-write	Used to initialize the value of the wchCrntPMOPRMaxValue object.
DAT wchCrntPMOPRMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.6.1.16	DateAndTime	read-only	The date and time stamp of the maximum optical power received value.
PMV wchCrntPMOPRMaxValidity	1.3.6.1.4.1.18070.2.2.1.16.12.6.1.17	PMValidity	read-write	Indicates the validity of the provided maximum optical power received value.
FIX wchCrntPMOPRMaxValue	1.3.6.1.4.1.18070.2.2.1.16.12.6.1.15	FixedX10	read-write	The maximum optical power received on the channel over the interval. Can be set to the value 0 to initialize.
INI wchCrntPMOPRMinInitialize	1.3.6.1.4.1.18070.2.2.1.16.12.6.1.14	InitializeCmd	read-write	Used to initialize the value of the wchCrntPMOPRMinValue object.
DAT wchCrntPMOPRMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.6.1.12	DateAndTime	read-only	The date and time stamp of the minimum optical power received value.
PMV wchCrntPMOPRMinValidity	1.3.6.1.4.1.18070.2.2.1.16.12.6.1.13	PMValidity	read-only	Indicates the validity of the provided minimum optical power received value.
FIX wchCrntPMOPRMinValue	1.3.6.1.4.1.18070.2.2.1.16.12.6.1.11	FixedX10	read-write	The minimum optical power received on the channel over the interval. Can be set to the value 0 to initialize.
DAT wchCrntPMOPRTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.6.1.9	DateAndTime	read-only	The date and time stamp of the instantaneous optical power received value.
PMV wchCrntPMOPRValidity	1.3.6.1.4.1.18070.2.2.1.16.12.6.1.10	PMValidity	read-only	Indicates the validity of the provided instantaneous optical power received value.
FIX wchCrntPMOPRValue	1.3.6.1.4.1.18070.2.2.1.16.12.6.1.8	FixedX10	read-only	The instantaneous optical power received on the channel.
INI wchCrntPMOPTMaxInitialize	1.3.6.1.4.1.18070.2.2.1.16.12.6.1.29	InitializeCmd	read-write	Used to initialize the value of the wchCrntPMOPTMaxValue object.
DAT wchCrntPMOPTMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.6.1.27	DateAndTime	read-only	The date and time stamp of the maximum optical power transmitted value.
PMV wchCrntPMOPTMaxValidity	1.3.6.1.4.1.18070.2.2.1.16.12.6.1.28	PMValidity	read-only	Indicates the validity of the provided maximum optical power transmitted value.
FIX wchCrntPMOPTMaxValue	1.3.6.1.4.1.18070.2.2.1.16.12.6.1.26	FixedX10	read-write	The maximum optical power transmitted on the channel over the interval. Can be set to the value 0 to initialize.
INI wchCrntPMOPTMinInitialize	1.3.6.1.4.1.18070.2.2.1.16.12.6.1.25	InitializeCmd	read-write	Used to initialize the value of the wchCrntPMOPTMinValue object.
DAT wchCrntPMOPTMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.6.1.23	DateAndTime	read-only	The date and time stamp of the minimum optical power transmitted value.
PMV wchCrntPMOPTMinValidity	1.3.6.1.4.1.18070.2.2.1.16.12.6.1.24	PMValidity	read-only	Indicates the validity of the provided minimum optical power transmitted value.
FIX wchCrntPMOPTMinValue	1.3.6.1.4.1.18070.2.2.1.16.12.6.1.22	FixedX10	read-write	The minimum optical power transmitted on the channel over the interval. Can be set to the value 0 to initialize.
DAT wchCrntPMOPTTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.6.1.20	DateAndTime	read-only	The date and time stamp of the instantaneous optical power transmitted value.
PMV wchCrntPMOPTValidity	1.3.6.1.4.1.18070.2.2.1.16.12.6.1.21	PMValidity	read-only	Indicates the validity of the provided instantaneous optical power transmitted value.
FIX wchCrntPMOPTValue	1.3.6.1.4.1.18070.2.2.1.16.12.6.1.19	FixedX10	read-only	The instantaneous optical power transmitted on the channel.
INT wchCrntPMPortIdx	1.3.6.1.4.1.18070.2.2.1.16.12.6.1.5	INTEGER	not-accessible	The number of the port of the specified port type in which the wavelength channel targeted for PMs is located.
OLP wchCrntPMPortTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.12.6.1.4	OlPortType	not-accessible	The type of port in which the wavelength channel targeted for PMs is located.
INT wchCrntPMShelfIdx	1.3.6.1.4.1.18070.2.2.1.16.12.6.1.2	INTEGER	not-accessible	The number of the shelf in which the wavelength channel targeted for PMs is located.
INT wchCrntPMSlotIdx	1.3.6.1.4.1.18070.2.2.1.16.12.6.1.3	INTEGER	not-accessible	The number of the slot in which the wavelength channel targeted for PMs is located.
wchCrntPMTable	1.3.6.1.4.1.18070.2.2.1.16.12.6		not-accessible	A table of current performance monitoring statistics collected for wavelength channels.
STR wchCustom1	1.3.6.1.4.1.18070.2.2.1.16.10.1.13	DisplayString	read-write	A variable length text string for operating company use.
STR wchCustom2	1.3.6.1.4.1.18070.2.2.1.16.10.1.14	DisplayString	read-write	A variable length text string for operating company use.
STR wchCustom3	1.3.6.1.4.1.18070.2.2.1.16.10.1.15	DisplayString	read-write	A variable length text string for operating company use.
wchEntry	1.3.6.1.4.1.18070.2.2.1.16.10.1		not-accessible	The conceptual row object of the wavelength channel table.
wchEvtNotifications	1.3.6.1.4.1.18070.2.2.2.1.33.4
FIX wchFrequency	1.3.6.1.4.1.18070.2.2.1.16.10.1.19	FixedX100	read-only	The frequency of the channel.
INT wchGrid	1.3.6.1.4.1.18070.2.2.1.16.10.1.17	INTEGER	read-write	The minimum grid spacing with which the channel is compatible.
CPT wchHistPMCpTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.12.7.1.1	CpType	not-accessible	The type of circuit pack on which the wavelength channel targeted for PMs is located.
wchHistPMEntry	1.3.6.1.4.1.18070.2.2.1.16.12.7.1		not-accessible	The row entry object of the Wavelength Channel Historical Performance Monitoring table. Each row of this table contains a full set of PM statistics and related data for a wavelength channel object in an optical layer grouping.
INT wchHistPMIdx	1.3.6.1.4.1.18070.2.2.1.16.12.7.1.6	INTEGER	not-accessible	The number of the wavelength channel targeted for PMs.
INT wchHistPMIntervalIdx	1.3.6.1.4.1.18070.2.2.1.16.12.7.1.8	INTEGER	not-accessible	The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
NUM wchHistPMIntervalTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.12.7.1.7	PMIntervalType	not-accessible	The type of PM bin according to interval length.
INI wchHistPMOPRMaxInitialize	1.3.6.1.4.1.18070.2.2.1.16.12.7.1.19	InitializeCmd	read-write	Used to initialize the value of the wchHistPMOPRMaxValue object.
DAT wchHistPMOPRMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.7.1.17	DateAndTime	read-only	The date and time stamp of the maximum optical power received value.
PMV wchHistPMOPRMaxValidity	1.3.6.1.4.1.18070.2.2.1.16.12.7.1.18	PMValidity	read-only	Indicates the validity of the provided maximum optical power received value.
FIX wchHistPMOPRMaxValue	1.3.6.1.4.1.18070.2.2.1.16.12.7.1.16	FixedX10	read-write	The maximum optical power received on the channel over the interval. Can be set to the value 0 to initialize the object.
INI wchHistPMOPRMinInitialize	1.3.6.1.4.1.18070.2.2.1.16.12.7.1.15	InitializeCmd	read-write	Used to initialize the value of the wchHistPMOPRMinValue object.
DAT wchHistPMOPRMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.7.1.13	DateAndTime	read-only	The date and time stamp of the minimum optical power received value.
PMV wchHistPMOPRMinValidity	1.3.6.1.4.1.18070.2.2.1.16.12.7.1.14	PMValidity	read-only	Indicates the validity of the provided minimum optical power received value.
FIX wchHistPMOPRMinValue	1.3.6.1.4.1.18070.2.2.1.16.12.7.1.12	FixedX10	read-write	The minimum optical power received on the channel over the interval. Can be set to the value 0 to initialize the object.
DAT wchHistPMOPRTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.7.1.10	DateAndTime	read-only	The date and time stamp of the instantaneous optical power received value.
PMV wchHistPMOPRValidity	1.3.6.1.4.1.18070.2.2.1.16.12.7.1.11	PMValidity	read-only	Indicates the validity of the provided instantaneous optical power received value.
FIX wchHistPMOPRValue	1.3.6.1.4.1.18070.2.2.1.16.12.7.1.9	FixedX10	read-only	The instantaneous optical power received on the channel.
INI wchHistPMOPTMaxInitialize	1.3.6.1.4.1.18070.2.2.1.16.12.7.1.30	InitializeCmd	read-write	Used to initialize the value of the wchHistPMOPTMaxValue object.
DAT wchHistPMOPTMaxTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.7.1.28	DateAndTime	read-only	The date and time stamp of the maximum optical power transmitted value.
PMV wchHistPMOPTMaxValidity	1.3.6.1.4.1.18070.2.2.1.16.12.7.1.29	PMValidity	read-only	Indicates the validity of the provided maximum optical power transmitted value.
FIX wchHistPMOPTMaxValue	1.3.6.1.4.1.18070.2.2.1.16.12.7.1.27	FixedX10	read-write	The maximum optical power transmitted on the channel over the interval. Can be set to the value 0 to initialize the object.
INI wchHistPMOPTMinInitialize	1.3.6.1.4.1.18070.2.2.1.16.12.7.1.26	InitializeCmd	read-write	Used to initialize the value of the wchHistPMOPTMinValue object.
DAT wchHistPMOPTMinTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.7.1.24	DateAndTime	read-only	The date and time stamp of the minimum optical power transmitted value.
PMV wchHistPMOPTMinValidity	1.3.6.1.4.1.18070.2.2.1.16.12.7.1.25	PMValidity	read-only	Indicates the validity of the provided minimum optical power transmitted value.
FIX wchHistPMOPTMinValue	1.3.6.1.4.1.18070.2.2.1.16.12.7.1.23	FixedX10	read-write	The minimum optical power transmitted on the channel over the interval. Can be set to the value 0 to initialize the object.
DAT wchHistPMOPTTimeStamp	1.3.6.1.4.1.18070.2.2.1.16.12.7.1.21	DateAndTime	read-only	The date and time stamp of the instantaneous optical power transmitted value.
PMV wchHistPMOPTValidity	1.3.6.1.4.1.18070.2.2.1.16.12.7.1.22	PMValidity	read-only	Indicates the validity of the provided instantaneous optical power transmitted value.
FIX wchHistPMOPTValue	1.3.6.1.4.1.18070.2.2.1.16.12.7.1.20	FixedX10	read-only	The instantaneous optical power transmitted on the channel.
INT wchHistPMPortIdx	1.3.6.1.4.1.18070.2.2.1.16.12.7.1.5	INTEGER	not-accessible	The number of the port of the specified port type in which the wavelength channel targeted for PMs is located.
OLP wchHistPMPortTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.12.7.1.4	OlPortType	not-accessible	The type of port in which the wavelength channel targeted for PMs is located.
INT wchHistPMShelfIdx	1.3.6.1.4.1.18070.2.2.1.16.12.7.1.2	INTEGER	not-accessible	The number of the shelf in which the wavelength channel targeted for PMs is located.
INT wchHistPMSlotIdx	1.3.6.1.4.1.18070.2.2.1.16.12.7.1.3	INTEGER	not-accessible	The number of the slot in which the wavelength channel targeted for PMs is located.
wchHistPMTable	1.3.6.1.4.1.18070.2.2.1.16.12.7		not-accessible	A table of historical performance monitoring statistics collected for wavelength channels.
STR wchId	1.3.6.1.4.1.18070.2.2.1.16.10.1.12	DisplayString	read-write	Textual data recorded by the user to briefly identify the wavelength channel object in a manner useful to the user.
INT wchIdx	1.3.6.1.4.1.18070.2.2.1.16.10.1.6	INTEGER	not-accessible	The number of the targeted wavelength channel.
NTF wchLossOfLightRxClear	1.3.6.1.4.1.18070.2.2.2.2.28.4.0.4			A previously active wavelength channel Receive Loss of Light condition has cleared.
NTF wchLossOfLightRxCond	1.3.6.1.4.1.18070.2.2.2.2.28.4.0.3			There is no received optical power detected for the channel.
NTF wchLossOfLightTxClear	1.3.6.1.4.1.18070.2.2.2.2.28.4.0.8			A previously active wavelength channel Transmitted Loss of Light condition has cleared.
NTF wchLossOfLightTxCond	1.3.6.1.4.1.18070.2.2.2.2.28.4.0.7			There is no transmitted optical power detected for the channel.
OPE wchOperStatQlfr	1.3.6.1.4.1.18070.2.2.1.16.10.1.9	OperStatQlfr	read-only	This is a textual list of qualifiers about the reported operational status of the wavelength channel.
OPE wchOperStatus	1.3.6.1.4.1.18070.2.2.1.16.10.1.8	OperStatus	read-only	The reported operational status of the wavelength channel.
INT wchPortIdx	1.3.6.1.4.1.18070.2.2.1.16.10.1.5	INTEGER	not-accessible	The number of the port on which the wavelength channel is located.
OLP wchPortTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.10.1.4	OlPortType	not-accessible	The type of port on which the wavelength channel is located.
NTF wchPowerOutOfSpecRxClear	1.3.6.1.4.1.18070.2.2.2.2.28.4.0.2			A previously active Wavelength Channel Received Power Out Of Specification condition has cleared.
NTF wchPowerOutOfSpecRxCond	1.3.6.1.4.1.18070.2.2.2.2.28.4.0.1			The power received for the wavelength channel is outside the operating range.
NTF wchPowerOutOfSpecRxHighClear	1.3.6.1.4.1.18070.2.2.2.2.28.4.0.14			A previously active Wavelength Channel Received Power Out Of Specification High condition has cleared.
NTF wchPowerOutOfSpecRxHighCond	1.3.6.1.4.1.18070.2.2.2.2.28.4.0.13			The power received for the wavelength channel exceeds the upper limit of the normal operating range.
NTF wchPowerOutOfSpecRxLowClear	1.3.6.1.4.1.18070.2.2.2.2.28.4.0.16			A previously active Wavelength Channel Received Power Out Of Specification Low condition has cleared.
NTF wchPowerOutOfSpecRxLowCond	1.3.6.1.4.1.18070.2.2.2.2.28.4.0.15			The power received for the wavelength channel is below the lower limit of the normal operating range.
NTF wchPowerOutOfSpecTxClear	1.3.6.1.4.1.18070.2.2.2.2.28.4.0.6			A previously active Wavelength Channel Transmitted Power Out Of Specification condition has cleared.
NTF wchPowerOutOfSpecTxCond	1.3.6.1.4.1.18070.2.2.2.2.28.4.0.5			The power transmitted for the wavelength channel is outside the operating range.
NTF wchPowerRxHighFailClear	1.3.6.1.4.1.18070.2.2.2.2.28.4.0.18			A previously active Wavelength Channel Received Power High Fail condition has cleared.
NTF wchPowerRxHighFailCond	1.3.6.1.4.1.18070.2.2.2.2.28.4.0.17			The power received for the wavelength channel exceeds the maximum allowable level. The wavelength channel is declared to be failed at this power level.
ROW wchRowStatus	1.3.6.1.4.1.18070.2.2.1.16.10.1.100	RowStatus	accessible-for-notify	The Wavelength Channel table RowStatus object is not readable or writeable because all entries in the Wavelength Channel table are automatically created and deleted when an wavelength channel cross-connection involving the wavelength channel is created or deleted. This Wavelength Channel row status object is used only in database change notifications to indicate if the row has been created or deleted.
INT wchShelfIdx	1.3.6.1.4.1.18070.2.2.1.16.10.1.2	INTEGER	not-accessible	The number of the shelf on which the wavelength channel is located.
INT wchSlotIdx	1.3.6.1.4.1.18070.2.2.1.16.10.1.3	INTEGER	not-accessible	The number of the slot on which the wavelength channel is located.
NTF wchStatusChangeEvt	1.3.6.1.4.1.18070.2.2.2.1.33.4.0.1			Notification of a change in the operational status or operational status qualifier or an optical layer WDM object.
wchTable	1.3.6.1.4.1.18070.2.2.1.16.10		not-accessible	This table lists all managed wavelength channels on equipment modules assigned to optical layer groupings.
NTF wchUnequippedClear	1.3.6.1.4.1.18070.2.2.2.2.28.4.0.10			A previously active wavelength channel unequipped indication condition has cleared.
NTF wchUnequippedCond	1.3.6.1.4.1.18070.2.2.2.2.28.4.0.9			An unequipped indication for the wavelength channel has been received from the far-end node of the line span.
FIX wchWavelength	1.3.6.1.4.1.18070.2.2.1.16.10.1.18	FixedX100	read-only	The wavelength of the channel.
INT wchXCDstChannelIdx	1.3.6.1.4.1.18070.2.2.1.16.9.1.12	INTEGER	not-accessible	The channel number of the destination wavelength channel of the cross-connection.
CPT wchXCDstCpTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.9.1.7	CpType	not-accessible	The type of circuit pack on which the destination wavelength channel of the cross-connection is located.
INT wchXCDstPortIdx	1.3.6.1.4.1.18070.2.2.1.16.9.1.11	INTEGER	not-accessible	The number of the port on which the destination wavelength channel of the cross-connection is located.
OLP wchXCDstPortTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.9.1.10	OlPortType	not-accessible	The type of port on which the destination wavelength channel of the cross-connection is located.
INT wchXCDstShelfIdx	1.3.6.1.4.1.18070.2.2.1.16.9.1.8	INTEGER	not-accessible	The number of the shelf on which the destination wavelength channel of the cross-connection is located.
INT wchXCDstSlotIdx	1.3.6.1.4.1.18070.2.2.1.16.9.1.9	INTEGER	not-accessible	The number of the slot on which the destination wavelength channel of the cross-connection is located.
wchXCEntry	1.3.6.1.4.1.18070.2.2.1.16.9.1		not-accessible	The conceptual row object of the wavelength channel cross-connection table.
ROW wchXCRowStatus	1.3.6.1.4.1.18070.2.2.1.16.9.1.100	RowStatus	read-create	Used to control the addition and deletion of entries in the wavelength channel cross-connection table.
STR wchXCServiceName	1.3.6.1.4.1.18070.2.2.1.16.9.1.13	DisplayString	read-create	Name of end-to-end wavelength service of which this cross- connection is a part.
INT wchXCSrcChannelIdx	1.3.6.1.4.1.18070.2.2.1.16.9.1.6	INTEGER	not-accessible	The channel number of the source wavelength channel of the cross-connection.
CPT wchXCSrcCpTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.9.1.1	CpType	not-accessible	The type of circuit pack on which the source wavelength channel of the cross-connection is located.
INT wchXCSrcPortIdx	1.3.6.1.4.1.18070.2.2.1.16.9.1.5	INTEGER	not-accessible	The number of the port on which the source wavelength channel of the cross-connection is located.
OLP wchXCSrcPortTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.9.1.4	OlPortType	not-accessible	The type of port on which the source wavelength channel of the cross-connection is located.
INT wchXCSrcShelfIdx	1.3.6.1.4.1.18070.2.2.1.16.9.1.2	INTEGER	not-accessible	The number of the shelf on which the source wavelength channel of the cross-connection is located.
INT wchXCSrcSlotIdx	1.3.6.1.4.1.18070.2.2.1.16.9.1.3	INTEGER	not-accessible	The number of the slot on which the source wavelength channel of the cross-connection is located.
wchXCTable	1.3.6.1.4.1.18070.2.2.1.16.9		not-accessible	This table lists all configured wavelength channel cross-connections configured on optical layer equipment.
HOU wdmActAutoEnableTimer	1.3.6.1.4.1.18070.2.2.1.16.8.1.9	HoursAndMinutes	read-only	Indicates the time remaining on the auto-enable timer if it is actively counting down. Otherwise, the value returned is 000-00.
ADM wdmAdminStatus	1.3.6.1.4.1.18070.2.2.1.16.8.1.5	AdminStatus	read-write	The administrative status of the WDM. The default value is autoEnabled if the supporting equipment is enabled or autoEnabled, otherwise it is disabled.
HOU wdmAutoEnableTimer	1.3.6.1.4.1.18070.2.2.1.16.8.1.8	HoursAndMinutes	read-write	Specifies the auto-enable timer for the targeted WDM. This value only applies if the wdmAdminStatus object is set to autoEnabled, in which case the default value is 008-00, otherwise, it is 000-00.
wdmCondNotifications	1.3.6.1.4.1.18070.2.2.2.2.28.3
CPT wdmCpTypeIdx	1.3.6.1.4.1.18070.2.2.1.16.8.1.1	CpType	not-accessible	The type of circuit pack on which the WDM is located.
STR wdmCustom1	1.3.6.1.4.1.18070.2.2.1.16.8.1.11	DisplayString	read-write	A variable length text string for operating company use.
STR wdmCustom2	1.3.6.1.4.1.18070.2.2.1.16.8.1.12	DisplayString	read-write	A variable length text string for operating company use.
STR wdmCustom3	1.3.6.1.4.1.18070.2.2.1.16.8.1.13	DisplayString	read-write	A variable length text string for operating company use.
wdmEntry	1.3.6.1.4.1.18070.2.2.1.16.8.1		not-accessible	The conceptual row object of the WDM table.
wdmEvtNotifications	1.3.6.1.4.1.18070.2.2.2.1.33.3
INT wdmFiberType	1.3.6.1.4.1.18070.2.2.1.16.8.1.14	INTEGER	read-write	The fiber type of the span fiber.
STR wdmId	1.3.6.1.4.1.18070.2.2.1.16.8.1.10	DisplayString	read-write	Textual data recorded by the user to briefly identify the WDM object in a manner useful to the user.
NTF wdmInvalidBoostAmpOperCnfgClear	1.3.6.1.4.1.18070.2.2.2.2.28.3.0.6			A previously active WDM Invalid Booster-Amplifier Operating Configuration condition has cleared.
NTF wdmInvalidBoostAmpOperCnfgCond	1.3.6.1.4.1.18070.2.2.2.2.28.3.0.5			The WDM optical booster-amplifier is operating at a configuration which is invalid for the detected loss.
NTF wdmInvalidMidAmpOperCnfgClear	1.3.6.1.4.1.18070.2.2.2.2.28.3.0.4			A previously active WDM Invalid Mid-Amplifier Operating Configuration condition has cleared.
NTF wdmInvalidMidAmpOperCnfgCond	1.3.6.1.4.1.18070.2.2.2.2.28.3.0.3			The WDM optical mid-amplifier is operating at a configuration which is invalid for the detected loss.
NTF wdmInvalidPreAmpOperCnfgClear	1.3.6.1.4.1.18070.2.2.2.2.28.3.0.2			A previously active WDM Invalid Pre-Amplifier Operating Configuration condition has cleared.
NTF wdmInvalidPreAmpOperCnfgCond	1.3.6.1.4.1.18070.2.2.2.2.28.3.0.1			The WDM optical pre-amplifier is operating at a configuration which is invalid for the detected loss.
INT wdmLineIdx	1.3.6.1.4.1.18070.2.2.1.16.8.1.4	INTEGER	not-accessible	The line number of the WDM.
INT wdmNumChannels	1.3.6.1.4.1.18070.2.2.1.16.8.1.18	INTEGER	read-only	The actual number of channels that the WDM is currently provisioned to carry.
OPE wdmOperStatQlfr	1.3.6.1.4.1.18070.2.2.1.16.8.1.7	OperStatQlfr	read-only	This is a textual list of qualifiers about the reported operational status of the WDM.
OPE wdmOperStatus	1.3.6.1.4.1.18070.2.2.1.16.8.1.6	OperStatus	read-only	The reported operational status of the WDM.
ROW wdmRowStatus	1.3.6.1.4.1.18070.2.2.1.16.8.1.100	RowStatus	accessible-for-notify	The WDM table RowStatus object is not readable or writeable because all entries in the table are automatically created and deleted when the supporting DLA or ROB circuit pack is assigned and unassigned to an optical layer grouping. This WDM row status object is used only in database change notifications to indicate if the row has been created or deleted.
INT wdmShelfIdx	1.3.6.1.4.1.18070.2.2.1.16.8.1.2	INTEGER	not-accessible	The number of the shelf in which the WDM is located.
INT wdmSlotIdx	1.3.6.1.4.1.18070.2.2.1.16.8.1.3	INTEGER	not-accessible	The number of the slot in which the WDM is located.
U32 wdmSpanLength	1.3.6.1.4.1.18070.2.2.1.16.8.1.15	Unsigned32	read-only	The measured length of the receive span fiber.
FIX wdmSpanLossRxHighTh	1.3.6.1.4.1.18070.2.2.1.16.8.1.16	FixedX10	read-write	The high threshold setting for the loss on the receive fiber of the Line span. The setting for this object is used to evaluate the olPortLossRxHighThCond trap. When the value of this object is set to 0, the olPortLossRxHighThCond trap is disabled.
FIX wdmSpanLossSpecMax	1.3.6.1.4.1.18070.2.2.1.16.8.1.17	FixedX10	read-only	The specified maximum supported loss on the Line span. The value of this object is dependent on the optical layer group configurations of the local and far-end nodes.
NTF wdmStatusChangeEvt	1.3.6.1.4.1.18070.2.2.2.1.33.3.0.1			Notification of a change in the operational status or operational status qualifier or an optical layer WDM object.
wdmTable	1.3.6.1.4.1.18070.2.2.1.16.8		not-accessible	This table lists all WDM managed objects that have been created on optical layer equipment.

RFC description

BTI Systems optical layer MIB for managing DLA amplifiers and ROADM modules with performance monitoring and alarms.

Start monitoring BTI Systems (Juniper) optical/packet-optical transport platforms with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BTI-OL-MIB

What Is BTI-OL-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description