BSU-BRGCLUSTER-MIB :: aniBsuSuBridgeEnable

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › BSU-BRGCLUSTER-MIB › aniBsuSuBridgeEnable

aniBsuSuBridgeEnable

Module: BSU-BRGCLUSTER-MIB

OID (symbolic): BSU-BRGCLUSTER-MIB::aniBsuSuBridgeEnable

OID (numeric): 1.3.6.1.4.1.4325.3.5.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This parameter is used to enable/disable SU to SU bridging on BSU wireless ports.

When BSU is running in point to point mode, this object is not-applicable. Also for PacketWave 750, this group is not-applicable.

What is aniBsuSuBridgeEnable?

Indicates whether SU-to-SU bridging is enabled or disabled on the BSU wireless ports, allowing subscriber units on the same BSU to communicate directly with each other. This setting does not apply when the BSU operates in point-to-point mode or on PacketWave 750 devices.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4325.3.5.1
snmpwalk -v2c -c public <target> BSU-BRGCLUSTER-MIB::aniBsuSuBridgeEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4325.3.5.1.1
snmpget -v2c -c public <target> BSU-BRGCLUSTER-MIB::aniBsuSuBridgeEnable.1

Start monitoring Aperto Networks (Ceragon) PacketWave/WiMAX base station units (BSU) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BSU-BRGCLUSTER-MIB::aniBsuSuBridgeEnable OID value, configure state conditions and alerts, and monitor any Aperto Networks (Ceragon) PacketWave/WiMAX base station units (BSU) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4325aniANIROOT-MIB
1.3.6.1.4.1.4325.3bsuANIROOT-MIB
1.3.6.1.4.1.4325.3.5aniBsuBridgeANIROOT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4325.3.5.1aniBsuSuBridgeEnableBSU-BRGCLUSTER-MIB