BSTD-OPT-MIB

All MIBs › BSTD-OPT-MIB

Category: Device Management

Description: Defines basic standard protocol options for WAN interface configuration on multi-protocol routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BSTD-OPT-MIB?

BSTD-OPT-MIB is a proprietary MIB (associated with Cabletron/Cajun 'cdx' equipment naming based on its sample objects) defining basic standard protocol option groups for WAN interface configuration on multi-protocol routers, specifically referencing CDX 6500-series port protocol groups. It exposes configuration objects that let an administrator select or verify which WAN protocol options (e.g., PPP, Frame Relay, or similar) are enabled on specific physical or synchronous/asynchronous ports of the device. Its monitoring value is chiefly configuration-status visibility: confirming which protocol group is bound to a given port helps verify that a WAN link is configured with the intended protocol stack, and detecting an unexpected protocol group assignment can explain why a circuit isn't establishing a link. It appears to be a companion configuration MIB to the broader CDX 6500 platform's port/interface MIBs rather than a standalone data source. It was typically deployed on CDX 6500-series multi-protocol routers/WAN access devices in enterprise and carrier WAN environments. Engineers can download the BSTD-OPT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in BSTD-OPT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Motorola Codex 6500-series data/statistical multiplexer (legacy)

Monitoring Examples

An administrator would check cdx6500PCTPortProtocolGroup and cdx6500PSTPortProtocolGroup to confirm which WAN protocol group is currently bound to a given synchronous or asynchronous port on a CDX 6500 device. A port showing a protocol group inconsistent with the intended WAN service (e.g., configured for the wrong protocol group after a card swap) would reveal why the link is failing to establish. This MIB is a configuration-reference module rather than a source of live performance counters.

What Can Be Monitored

WAN port protocol group assignment
protocol configuration per port

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
enterprises

OIDs

OID symbolic	OID numeric	Type	Access	Description
cdx6500	1.3.6.1.4.1.449.2.1
STR cdx6500BSTDCallMnemonic	1.3.6.1.4.1.449.2.1.2.1.8.1.1.9	DisplayString	read-only	This mnemonic name is used for originating calls from this Station.
INT cdx6500BSTDCfgAsyncConnType	1.3.6.1.4.1.449.2.1.2.1.1.14.1.7	INTEGER	read-only	Specify the control signal handshake required for a connection to be made to this port: simp - simple, no control signals required simpa - CTS follows RTS, but no control signals required Note: applicable for asynchronous operation only. newvalSimp - same functionality as 'simp', new enumeration introduced for RFC1155 compatibility.
INT cdx6500BSTDCfgBillRec	1.3.6.1.4.1.449.2.1.2.1.1.14.1.18	INTEGER	read-only	This controls whether billing (accounting) records will be created for calls on this Device. newvalOff - same functionality as 'off', new enumeration introduced for RFC1155 compatibility.
INT cdx6500BSTDCfgClockSource	1.3.6.1.4.1.449.2.1.2.1.1.14.1.4	INTEGER	read-only	int - internal clock source ext - external clock source. newvalInt - same functionality as 'int', new enumeration introduced for RFC1155 compatibility.
INT cdx6500BSTDCfgClockSpeed	1.3.6.1.4.1.449.2.1.2.1.1.14.1.5	INTEGER	read-only	This is the speed of the port in bits per second, when using internal clocking.
INT cdx6500BSTDCfgContentionMode	1.3.6.1.4.1.449.2.1.2.1.1.14.1.14	INTEGER	read-only	For a TPAD port only : This parameter enables or disables a TPAD port to use BSTD Contention Mode. Note that an HPAD must have this option set to Enable. disable - Disable Contention Mode enable - Enable Contention Mode. newvalDisable - same functionality as 'disable', new enumeration introduced for RFC1155 compatibility.
INT cdx6500BSTDCfgElectricalInterfaceType	1.3.6.1.4.1.449.2.1.2.1.1.14.1.20	INTEGER	read-only	Specify the Electrical Interface Type: V.24 - V.24 Electrical Interface Type V.35 - V.35 Electrical Interface Type V.36 - V.36 Electrical Interface Type X.21 - X.21 Electrical Interface Type NONE - Electrically disabled
INT cdx6500BSTDCfgErrThreshCount	1.3.6.1.4.1.449.2.1.2.1.1.14.1.10	INTEGER	read-only	Indicates number of consecutive errors that can occur before a device is considered down.
INT cdx6500BSTDCfgHighSpeedElectricalInterfaceOption	1.3.6.1.4.1.449.2.1.2.1.1.14.1.22	INTEGER	read-only	Specify the cable type: NONE - V.35/V.36/X.21 DCE with straight through cable XOVER - V.35/V.36/X.21 DCE with crossover adapter cable
INT cdx6500BSTDCfgLineInterface	1.3.6.1.4.1.449.2.1.2.1.1.14.1.3	INTEGER	read-only	Selects the line interface to use. sync - synchronous operation. async - asynchronous operation. newvalSync - same functionality as 'sync', new enumeration introduced for RFC1155 compatibility.
INT cdx6500BSTDCfgNumDevices	1.3.6.1.4.1.449.2.1.2.1.1.14.1.8	INTEGER	read-only	Specifies the number of physical devices on this line.
INT cdx6500BSTDCfgPadProtTimeout	1.3.6.1.4.1.449.2.1.2.1.1.14.1.12	INTEGER	read-only	Specifies the maximum amount of time in seconds the PAD will wait for the end of a multi-packet message from the network. If this time limit is exceeded, the PAD will initiate the clearing of the circuit.
INT cdx6500BSTDCfgPADType	1.3.6.1.4.1.449.2.1.2.1.1.14.1.2	INTEGER	read-only	Indicates whether the port is functioning as a Terminal PAD (tpad) or a Host PAD (hpad). newvalTpad - same functionality as 'tpad', new enumeration introduced for RFC1155 compatibility.
INT cdx6500BSTDCfgPortNumber	1.3.6.1.4.1.449.2.1.2.1.1.14.1.1	INTEGER	read-only	The BSTD port number described by this entry.
INT cdx6500BSTDCfgPortOptions	1.3.6.1.4.1.449.2.1.2.1.1.14.1.16	INTEGER	read-only	This object has been deprecated, It is replaced by cdx6500BSTDPortOptString.
STR cdx6500BSTDCfgPortSubAddr	1.3.6.1.4.1.449.2.1.2.1.1.14.1.15	DisplayString	read-only	0 - 3 Decimal digits Calls addressed to this node and with this subaddress will be routed to this port.
INT cdx6500BSTDCfgResponseTimeout	1.3.6.1.4.1.449.2.1.2.1.1.14.1.11	INTEGER	read-only	Specifies the amount of time in msec the PAD allows a terminal, printer or host to respond. As a result, the TPAD may re-transmit the previous message or abort the current procedure. The HPAD aborts the current procedure as though EOT was received, allowing this HPAD station to disconnect it's X.25 circuit if the host malfunctions. An HPAD with a response timeout shorter than the hosts ability to respond may result in Inbound Errors.
STR cdx6500BSTDCfgRestrictConnDest	1.3.6.1.4.1.449.2.1.2.1.1.14.1.17	DisplayString	read-only	0 - 3 Decimal digits or a single blank All calls originating from this port will be routed to the destination specified in this parameter, irrespective of route selection table entries. For example, to route calls to port 1, use P1. To route calls to port 2, station 4, use P2S4.
INT cdx6500BSTDCfgServTimer	1.3.6.1.4.1.449.2.1.2.1.1.14.1.9	INTEGER	read-only	The Service Timer specifies the interval of time in seconds between periodic servicing. Such servicing includes intervals between the time the PAD will attempt to poll devices that previously failed to respond and intervals between failures in attempts to establish a connection from a device configured for Autocall.
INT cdx6500BSTDCfgSyncContention	1.3.6.1.4.1.449.2.1.2.1.1.14.1.6	INTEGER	read-only	Indicates whether Half Duplex (hdx) or Full Duplex (fdx) modem signals are being generated. Full Duplex indicates communication is occuring in both directions simultaneously between devices. Half Duplex indicates transmission is occuring in both directions, but only in one direction at a time. newvalHdx - same functionality as 'hdx', new enumeration introduced for RFC1155 compatibility.
INT cdx6500BSTDCfgTranNumbers	1.3.6.1.4.1.449.2.1.2.1.1.14.1.13	INTEGER	read-only	This parameter is used to select the BSTD Transmission Numbering's mode of operation. disable - Disable Transmission Numbering modulo2 - Alternating '0' and '1' scheme. newvalDisable - same functionality as 'disable', new enumeration introduced for RFC1155 compatibility.
INT cdx6500BSTDCfgV24ElectricalInterfaceOption	1.3.6.1.4.1.449.2.1.2.1.1.14.1.21	INTEGER	read-only	Specify the Pin 22 option: RI - V.24 uses Pin 22 for Ring Indicator output signal TM - V.24 uses Pin 22 for Test Mode input signal
INT cdx6500BSTDCharRateIn	1.3.6.1.4.1.449.2.1.3.1.1.14.1.11	INTEGER	read-only	Number of characters received per second.
INT cdx6500BSTDCharRateOut	1.3.6.1.4.1.449.2.1.3.1.1.14.1.12	INTEGER	read-only	Number of characters sent per second.
CTR cdx6500BSTDCrcBccErrs	1.3.6.1.4.1.449.2.1.3.1.1.14.1.13	Counter	read-only	Number of CRC errors since last node, port, or statistics reset.
STR cdx6500BSTDDesstStationAddr2	1.3.6.1.4.1.449.2.1.2.1.8.1.1.6	DisplayString	read-only	This is the first byte for the Station on the remote PAD. The Destination Station address consists of two hexadecimal digits. The valid range for a digit is 20-7F.
STR cdx6500BSTDDestStationAddr1	1.3.6.1.4.1.449.2.1.2.1.8.1.1.5	DisplayString	read-only	This is the first byte for the Station on the remote PAD. The Destination Station address consists of two hexadecimal digits. The valid range for a digit is 20-7F.
INT cdx6500BSTDDevEntry	1.3.6.1.4.1.449.2.1.2.1.8.1.1.2	INTEGER	read-only	The unique number for this specific port.
INT cdx6500BSTDDevPortNumber	1.3.6.1.4.1.449.2.1.2.1.8.1.1.1	INTEGER	read-only	The BSTD port accessing this device
STR cdx6500BSTDGroupAddr1	1.3.6.1.4.1.449.2.1.2.1.8.1.1.7	DisplayString	read-only	This is the first byte of this Station's Group address. The Group address consists of two hexadecimal digits. The valid range for a digit is 20-7F.
STR cdx6500BSTDGroupAddr2	1.3.6.1.4.1.449.2.1.2.1.8.1.1.8	DisplayString	read-only	This is the second byte of this Station's Group address. The Group address consists of two hexadecimal digits. The valid range for a digit is 20-7F.
CTR cdx6500BSTDInChars	1.3.6.1.4.1.449.2.1.3.1.1.14.1.9	Counter	read-only	Number of characters received since last node, port, or statistics reset.
CTR cdx6500BSTDInMsgs	1.3.6.1.4.1.449.2.1.3.1.1.14.1.7	Counter	read-only	Number of message received since last node, port, or statistics reset.
CTR cdx6500BSTDOutChars	1.3.6.1.4.1.449.2.1.3.1.1.14.1.10	Counter	read-only	Number of characters sent since last node, port, or statistics reset.
CTR cdx6500BSTDOutMsgs	1.3.6.1.4.1.449.2.1.3.1.1.14.1.8	Counter	read-only	Number of message sent since last node, port, or statistics reset.
STR cdx6500BSTDPortOptString	1.3.6.1.4.1.449.2.1.2.1.1.14.1.19	DisplayString	read-only	This is the new object for cdx6500BSTDPortOption. Select options on this BSTD port as follows: NONE - no option specified ORG - Controllers on this port will originate the calls ACK - DSP End-to-End Acknowledgements are to be used Any combination of above specified by summing (e.g. ORG+ACK).
INT cdx6500BSTDPortSpeed	1.3.6.1.4.1.449.2.1.3.1.1.14.1.4	INTEGER	read-only	This is the speed of the port if clock is internal. If clock is external, this is the detected clock speed. If Port Speed is 0, clock is external, but clocking is not being received from attatched device.
STR cdx6500BSTDPortState	1.3.6.1.4.1.449.2.1.3.1.1.14.1.3	DisplayString	read-only	Port State indicates what the port is actually in the process of doing. This value may be one of : INACTIVE - H/TPAD port inactive entered during boot WTPOLSERVE - TPAD is waiting for response to a poll WTSELRESP - TPAD is waiting for the response to a select WTDATARESP - H/TPAD is waiting for data to be acknowledged DATA - H/TPAD is in the process of sending/receiving data SEL/POL - TPAD is about to select or poll a controller. This is the most common state for a TPAD SELECT - TPAD is about to select a device POLL - TPAD is about to poll a device WTENQRESP - H/TPAD is waiting for a NAK response to an ENQ sent IDLE - HPAD is waiting for the host to send commands. This is the most common state of the HPAD WTEOT - HPAD is waiting for an expected EOT from the host FLUSHINGDATA - HPAD encountered an error in the message received from the host. As a result, the data is being flushed WTLCM - HPAD received a read/modify and is waiting for the response from the TPAD.
cdx6500BSTDPortStatEntry	1.3.6.1.4.1.449.2.1.3.1.1.14.1		not-accessible	A BSTD Port Statistic Table entry. Each entry contains the statistics for a single BSTD port.
INT cdx6500BSTDPortStatus	1.3.6.1.4.1.449.2.1.3.1.1.14.1.2	INTEGER	read-only	Port Status indicates whether or not the port is switched on and is ready for operation. This value may be one of : up - Port is up and running. down - port is down. disabled - port has been disabled. enabled - port has been enabled, but is not yet Up busyOut - port has been set to be disabled as soon as last active session is disestablished. No new sessions will be established. newvalDisabled - same functionality as 'disabled', new enumeration introduced for RFC1155 compatibility.
INT cdx6500BSTDPortUtilIn	1.3.6.1.4.1.449.2.1.3.1.1.14.1.5	INTEGER	read-only	Percentage of Port input bandwidth in use.
INT cdx6500BSTDPortUtilOut	1.3.6.1.4.1.449.2.1.3.1.1.14.1.6	INTEGER	read-only	Percentage of Port output bandwidth in use.
STR cdx6500BSTDStationAddr1	1.3.6.1.4.1.449.2.1.2.1.8.1.1.3	DisplayString	read-only	This is the first byte of this Station's address. The Station address consists of two hexadecimal digits. The valid range for a digit is 20-7F.
STR cdx6500BSTDStationAddr2	1.3.6.1.4.1.449.2.1.2.1.8.1.1.4	DisplayString	read-only	This is the second byte of this Station's address. The Station address consists of two hexadecimal digits. The valid range for a digit is 20-7F.
INT cdx6500BSTDStationEnabled	1.3.6.1.4.1.449.2.1.2.1.8.1.1.10	INTEGER	read-only	This parameter is used to enable or disable the operation of this Station. no - Disable Station. yes - Enable Station. newvalNo - same functionality as 'no', new enumeration introduced for RFC1155 compatibility.
INT cdx6500BSTDStatPortNumber	1.3.6.1.4.1.449.2.1.3.1.1.14.1.1	INTEGER	read-only	The BSTD port number described by this entry.
cdx6500CfgProtocolGroup	1.3.6.1.4.1.449.2.1.2.1
cdx6500Configuration	1.3.6.1.4.1.449.2.1.2
cdx6500PBCTBSTDDeviceEntry	1.3.6.1.4.1.449.2.1.2.1.8.1.1		not-accessible	A BSTD Configuration Table entry. Each entry contains the configuration parameters for a single BSTD device.
cdx6500PBCTBSTDDeviceTable	1.3.6.1.4.1.449.2.1.2.1.8.1		not-accessible	A table of BSTD device configuration parameters.
cdx6500PCTBSTDDeviceGroup	1.3.6.1.4.1.449.2.1.2.1.8
cdx6500PCTPortProtocolGroup	1.3.6.1.4.1.449.2.1.2.1.1
cdx6500PPCTBSTDPortEntry	1.3.6.1.4.1.449.2.1.2.1.1.14.1		not-accessible	A BSTD Configuration Table entry. Each entry contains the configuration parameters for a single BSTD port.
cdx6500PPCTBSTDPortTable	1.3.6.1.4.1.449.2.1.2.1.1.14		not-accessible	A table of BSTD Port configuration parameters.
cdx6500PPSTBSTDPortStatTable	1.3.6.1.4.1.449.2.1.3.1.1.14		not-accessible	A table of BSTD port statistics.
cdx6500PSTPortProtocolGroup	1.3.6.1.4.1.449.2.1.3.1.1
cdx6500Statistics	1.3.6.1.4.1.449.2.1.3
cdx6500StatProtocolGroup	1.3.6.1.4.1.449.2.1.3.1
cdxProductSpecific	1.3.6.1.4.1.449.2
codex	1.3.6.1.4.1.449

RFC description

Broadsoft vendor-private MIB for managing B-STD optional features and extensions.

Start monitoring Motorola Codex 6500-series data/statistical multiplexer (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BSTD-OPT-MIB

What Is BSTD-OPT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description