APERTUS-UA-RESPONSE-TIME-MIB

All MIBs › APERTUS-UA-RESPONSE-TIME-MIB

Category: Device Management

Description: Apertus Technologies universal access response-time measurement and SLA monitoring.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is APERTUS-UA-RESPONSE-TIME-MIB?

APERTUS-UA-RESPONSE-TIME-MIB is an Apertus Technologies enterprise MIB focused on measuring response time and service-level performance of the vendor's Universal Access server, an access/gateway product for network connectivity. It falls into the performance/SLA-monitoring category, intended to expose response-time metrics used to gauge how quickly the Universal Access server is servicing requests. Its monitoring emphasis is on software/service health rather than classic hardware sensors: the underlying goal is to detect degraded server responsiveness that could indicate the server or its software is overloaded or unhealthy, functioning as an availability/SLA indicator for the device. No strong external MIB dependency is evident beyond standard SNMPv2 SMI/enterprise-tree conventions. It is typically deployed wherever an Apertus Universal Access server provides network access services, and operators rely on APERTUS-UA-RESPONSE-TIME-MIB SNMP monitoring to track its response-time SLA over time.

IPNetwork Monitor allows you to monitor SNMP objects defined in APERTUS-UA-RESPONSE-TIME-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Apertus Technologies Universal Access server

Monitoring Examples

The sample objects available for this module are only generic SMI tree nodes (internet, directory, mgmt, experimental, private, enterprises) rather than concrete response-time objects, so no specific object names can be honestly cited here. Based on its stated purpose, an operator would be expected to poll response-time measurement objects for the Universal Access server to detect a rising response time that signals server overload or degraded service, but the precise object/table names cannot be confirmed from the available data.

What Can Be Monitored

server response time
service-level/SLA performance indicator

Imported Objects

From RFC1213-MIB

mib-2

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Gauge32
IpAddress
MODULE-IDENTITY
OBJECT-IDENTITY
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
internet	1.3.6.1
directory	1.3.6.1.1
mgmt	1.3.6.1.2
experimental	1.3.6.1.3
private	1.3.6.1.4
enterprises	1.3.6.1.4.1
apertus	1.3.6.1.4.1.543
isg	1.3.6.1.4.1.543.3
aperua	1.3.6.1.4.1.543.3.3
aperresponsetime	1.3.6.1.4.1.543.3.3.5
aperResponseTimeMIB	1.3.6.1.4.1.543.3.3.5.1
aperResponseTimeMIBObjects	1.3.6.1.4.1.543.3.3.5.1.1
aperResponseTimeConfig	1.3.6.1.4.1.543.3.3.5.1.1.1
INT aperResponseTimeConfigStatus	1.3.6.1.4.1.543.3.3.5.1.1.1.1	INTEGER	read-only	Status of Universal Access server
TIK aperResponseTimeConfigUpTime	1.3.6.1.4.1.543.3.3.5.1.1.1.2	TimeTicks	read-only	This value represents the time elapsed since the server was started in 1/100nths of a second.
aperResponseTimeDomain	1.3.6.1.4.1.543.3.3.5.1.1.2
aperResponseTimeDomainTable	1.3.6.1.4.1.543.3.3.5.1.1.2.1		not-accessible	Domain information broken down domain name.
aperResponseTimeDomainEntry	1.3.6.1.4.1.543.3.3.5.1.1.2.1.1		not-accessible	This table contains information on each of the load balance domains under its control.
STR aperResponseTimeDomainName	1.3.6.1.4.1.543.3.3.5.1.1.2.1.1.1	DisplayString	read-only	The zone name for this load-balance domain.
INT aperResponseTimeDomainUpServers	1.3.6.1.4.1.543.3.3.5.1.1.2.1.1.2	INTEGER	read-only	The number of servers that are up at this time.
INT aperResponseTimeDomainDownServers	1.3.6.1.4.1.543.3.3.5.1.1.2.1.1.3	INTEGER	read-only	The number of servers in list that are marked as down at this time.
INT aperResponseTimeDomainCompareMethod	1.3.6.1.4.1.543.3.3.5.1.1.2.1.1.4	INTEGER	read-only	How the ...NodeWindow field is interpreted. If the compare method is absolute, the values are compared by absolute adjustments to the response time. (EG, a 10ms response time with a window of 40 in a absolute domain will have an effective compare time of 50ms). A percentage domain indicates that the values are offset by the given percentage. (EG, a 20ms responsetime with a window of 400 will have am effective compare time of 80ms). Note that to leave a value unadjusted, the window needs to be 100.
aperResponseTimeNode	1.3.6.1.4.1.543.3.3.5.1.1.3
aperResponseTimeNodeTable	1.3.6.1.4.1.543.3.3.5.1.1.3.1		not-accessible	Node information broken down domain name and IP address
aperResponseTimeNodeEntry	1.3.6.1.4.1.543.3.3.5.1.1.3.1.1		not-accessible	This table contains information on each of the machines in the different laod balance zones.
STR aperResponseTimeNodeName	1.3.6.1.4.1.543.3.3.5.1.1.3.1.1.1	DisplayString	read-only	The zone name for this Node.
IP aperResponseTimeNodeIP	1.3.6.1.4.1.543.3.3.5.1.1.3.1.1.2	IpAddress	read-only	The IP address of the NODE.
INT aperResponseTimeNodeWindow	1.3.6.1.4.1.543.3.3.5.1.1.3.1.1.3	INTEGER	read-only	The window offset for this node vs other nodes within the same pool level. Please see the description for the domain field ...CompareMethod for more information on this fields usage.
INT aperResponseTimeNodePoolIndex	1.3.6.1.4.1.543.3.3.5.1.1.3.1.1.4	INTEGER	read-only	This value is the pool index. When all nodes with a lower index are down, the items with next highest pool index are considered for responseTime usage.
INT aperResponseTimeNodeStatus	1.3.6.1.4.1.543.3.3.5.1.1.3.1.1.5	INTEGER	read-only	Indicates the status of the node. Up(1) shows that the node is up and is being considered for use. Down(2) indicates that the last query to the NODE image resulted in a down marker for the node. Admindown(3) indicates that an administrator took the node offline manually (from the UA server end). Notqueried(4) is used to indicate that a node has never been queried.
TIK aperResponseTimeNodeResponseTime	1.3.6.1.4.1.543.3.3.5.1.1.3.1.1.6	TimeTicks	read-only	Response time in MS of last node access. A value of 0 is returned if NodeStatus is not ready(1) or if the node has never been queried
TIK aperResponseTimeNodeAdjustedCompareValue	1.3.6.1.4.1.543.3.3.5.1.1.3.1.1.7	TimeTicks	read-only	Response time as adjusted by the window value.

RFC description

Apertus Universal Access server MIB for monitoring response time metrics across domains and nodes.

Start monitoring Apertus Technologies Universal Access server (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download APERTUS-UA-RESPONSE-TIME-MIB

What Is APERTUS-UA-RESPONSE-TIME-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description