BRWAVE-RADIO-MIB

All MIBs › BRWAVE-RADIO-MIB

Organization: BridgeWave Communications

Last Updated: 2006-07-06

Category: Optical and WDM

Description: Monitors BridgeWave millimeter-wave radio modem link quality, signal levels, and data throughput.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BRWAVE-RADIO-MIB?

BRWAVE-RADIO-MIB is BridgeWave Communications' proprietary MIB for its millimeter-wave point-to-point wireless radio links used for high-capacity wireless backhaul. It exposes hardware identity data (radio, baseband, IF, and millimeter-wave unit serial numbers), radio configuration (transmit band, factory data rate), and hardware health telemetry including input voltage and unit/transmitter temperature, plus trap and event counters. It is strongly oriented toward hardware status monitoring — tracking unit and transmitter temperature and input voltage to catch thermal or power problems, and trap/event counts to detect link instability or hardware faults, making it a core tool for radio-link health monitoring. No explicit dependency on standard IETF MIBs is indicated, though it likely coexists with IF-MIB for link-level traffic statistics. It is deployed on outdoor millimeter-wave radio units providing point-to-point wireless backhaul links between towers or buildings in telecom and enterprise networks. Engineers can download the BRWAVE-RADIO-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in BRWAVE-RADIO-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

BridgeWave millimeter-wave point-to-point radio link

Monitoring Examples

An administrator would poll brwaveRadioUnitTemperature and brwaveRadioTxTemperature to catch a transmitter or unit overheating (e.g., due to direct sun exposure or a cooling fault), cross-check brwaveRadioInVoltage for a failing power supply, and watch brwaveTrapCount alongside brwaveRadioEvents for a spike indicating link flaps or hardware faults. A rising brwaveRadioTxTemperature combined with an increasing brwaveTrapCount would be a strong signal of imminent radio hardware failure.

What Can Be Monitored

radio unit temperature
transmitter (Tx) temperature
input voltage
trap/event count
transmit band and data rate configuration

Imported Objects

From IF-MIB

ifIndex

OBJECT-TYPE

From SNMPv2-CONF

OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
bridgeWave	1.3.6.1.4.1.6080			BridgeWave enterprise OID.
brwaveReg	1.3.6.1.4.1.6080.1			Sub-tree for BridgeWave objects registration.
brwaveMibs	1.3.6.1.4.1.6080.1.1			Sub-tree to register values assigned to MIB modules with the MODULES-IDENTITY construct.
brwaveRadioMibModule	1.3.6.1.4.1.6080.1.1.3			Radio MIB module.
brwaveModules	1.3.6.1.4.1.6080.1.2			Sub-tree to register unique values assigned to identify all BridgeWave hardware and software components of ethernet radio products.
brwaveRadioFE60	1.3.6.1.4.1.6080.1.2.1			Registered System OID for FE60 radio.
brwaveRadioGE60	1.3.6.1.4.1.6080.1.2.2			Registered System OID for GE60 radio.
brwaveRadioAR60	1.3.6.1.4.1.6080.1.2.3			Registered system OID for AdaptiveRate(AR60) radio.
brwaveCommon	1.3.6.1.4.1.6080.2			Sub-tree for BridgeWave objects common across products.
STR brwaveRadioSn	1.3.6.1.4.1.6080.2.1	DisplayString	read-only	Radio serial number.
STR brwaveUnitModel	1.3.6.1.4.1.6080.2.2	DisplayString	read-only	Unit's model.
STR brwaveBbSn	1.3.6.1.4.1.6080.2.3	DisplayString	read-only	Base Band hardware serial number
STR brwaveIfSn	1.3.6.1.4.1.6080.2.4	DisplayString	read-only	IF hardware serial number
STR brwaveMmwSn	1.3.6.1.4.1.6080.2.5	DisplayString	read-only	MMW Hardware serial number
U32 brwaveTrapCount	1.3.6.1.4.1.6080.2.6	Unsigned32	read-only	Number of traps generated by unit since start-up. Rolls back to zero once reached to maximum value.
brwaveProducts	1.3.6.1.4.1.6080.3			Sub-tree for product specific objects & events
brwaveRadio	1.3.6.1.4.1.6080.3.1			Ethernet Radio (FE60/GE60/AR60) obejcts.
brwaveRadioFactorySetup	1.3.6.1.4.1.6080.3.1.2			Group of factory setup objects.
INT brwaveRadioTxBand	1.3.6.1.4.1.6080.3.1.2.1	INTEGER	read-only	Radio Link Transmit frequency.
INT brwaveRadioFactoryRate	1.3.6.1.4.1.6080.3.1.2.3	INTEGER	read-only	Factory configured radio link rate.
I32 brwaveRadioClearStats	1.3.6.1.4.1.6080.3.1.2.4	Integer32	read-write	Clear Statistics, Set value of 1 to clear. Returns always 0 when read.
brwaveRadioStatus	1.3.6.1.4.1.6080.3.1.3			Group of radio status objects.
I32 brwaveRadioInVoltage	1.3.6.1.4.1.6080.3.1.3.1	Integer32	read-only	Input voltage. The reading of the unit's input voltage level in Volts x100.
I32 brwaveRadioUnitTemperature	1.3.6.1.4.1.6080.3.1.3.2	Integer32	read-only	Unit Temperature. The reading of the temperature sensor in degrees C x 100.
I32 brwaveRadioTxTemperature	1.3.6.1.4.1.6080.3.1.3.3	Integer32	read-only	Radio Transmiter Temperature. The reading of the radio temperature sensor in degrees C x 100.
I32 brwaveRadioRSL	1.3.6.1.4.1.6080.3.1.3.4	Integer32	read-only	Received Signal Level. The signal level of the received radio frequency in dBm x 100
STR brwaveRadioRSLVoltage	1.3.6.1.4.1.6080.3.1.3.5	DisplayString	read-only	Received Signal Level measured as Voltage.
I32 brwaveRadioAbsRSL	1.3.6.1.4.1.6080.3.1.3.6	Integer32	read-only	Received Signal Level. The signal level of the received radio frequency in dBm x 100
I32 brwaveRadioRSLVoltageInt	1.3.6.1.4.1.6080.3.1.3.7	Integer32	read-only	Received Signal Level measured as Voltage.
I32 brwaveCopperUtilization	1.3.6.1.4.1.6080.3.1.3.8	Integer32	read-only	Link utilization calculated every polling interval.
I32 brwaveFiberUtilization	1.3.6.1.4.1.6080.3.1.3.9	Integer32	read-only	Link utilization calculated every polling interval.
I32 brwaveRadioUtilization	1.3.6.1.4.1.6080.3.1.3.10	Integer32	read-only	Link utilization calculated every polling interval.
INT brwaveRadioFecError	1.3.6.1.4.1.6080.3.1.3.11	INTEGER	read-only	Post and Pre FEC error calculated every polling interval 0 - No Error, 1-Pre FEC Error, 2-Post FEC Error
I32 brwaveRadioPreFecFlag	1.3.6.1.4.1.6080.3.1.3.12	Integer32	read-only	Pre FEC error flag every polling interval
I32 brwaveRadioPostFecFlag	1.3.6.1.4.1.6080.3.1.3.13	Integer32	read-only	Post FEC error Flag every polling interval
I32 brwaveRadioLinkRate	1.3.6.1.4.1.6080.3.1.3.14	Integer32	read-only	Radio Link Rate in Mbps.
brwaveRadioEvents	1.3.6.1.4.1.6080.3.1.9
brwaveRadioEventsV2	1.3.6.1.4.1.6080.3.1.9.0
NTF brwaveErrorsOverThreshold	1.3.6.1.4.1.6080.3.1.9.0.1			Link has error rate over threshold.
NTF brwaveErrorsUnderThreshold	1.3.6.1.4.1.6080.3.1.9.0.2			Link error rate changed from over to under threshold .
NTF brwaveUnitTemperatureAbnormal	1.3.6.1.4.1.6080.3.1.9.0.3			Radio unit temperature not in normal operating range. Normal range is: -20 to +75 degree Centigrade.
NTF brwaveUnitTemperatureNormal	1.3.6.1.4.1.6080.3.1.9.0.4			Unit temperature restores from abnormal to normal range.
NTF brwaveTxTemperatureAbnormal	1.3.6.1.4.1.6080.3.1.9.0.5			Transmitter temperature is not in normal operating range. Normal range is: -20 to +75 degree Centigrade.
NTF brwaveTxTemperatureNormal	1.3.6.1.4.1.6080.3.1.9.0.6			Transmitter temperature is restored to normal range.
NTF brwaveInputVoltageAbnormal	1.3.6.1.4.1.6080.3.1.9.0.7			Unit's input voltage is not in normal range. Normal input voltage > 16 Volts.
NTF brwaveInputVoltageNormal	1.3.6.1.4.1.6080.3.1.9.0.8			Unit's input voltage is restored to normal range.
NTF brwaveRslNormal	1.3.6.1.4.1.6080.3.1.9.0.10			Received Signal Level is normal. Normal signal level RSL > -55.00 dBm (Gigabit) and RSL > -59.00 dBm (Fast Ethernet).
NTF brwaveRslMinor	1.3.6.1.4.1.6080.3.1.9.0.11			Received Signal Leve droped to the level of minor event. RSL from -55.00 to -59.00 dBm (GE Radio) RSL from -59.00 to -65.00 dBm (FE radio).
NTF brwaveRslMajor	1.3.6.1.4.1.6080.3.1.9.0.13			RSL droppped to the level of major event. RSL < -59.00 dBm (GE Radio) or RSL < -65 dBm (FE radio).
NTF brwaveConfigChange	1.3.6.1.4.1.6080.3.1.9.0.26			Configuration changes are performed by WEB client.
NTF brwaveLoginSuccessfull	1.3.6.1.4.1.6080.3.1.9.0.27			NMS Loged in successfully.
NTF brwaveGeToFeSwitch	1.3.6.1.4.1.6080.3.1.9.0.28			Tx Rate switched from GE to FE.
NTF brwaveFeToGeSwitch	1.3.6.1.4.1.6080.3.1.9.0.29			Tx Rate switched from FE to GE.
brwaveRadioTrapObjs	1.3.6.1.4.1.6080.3.1.9.1
OCT managerIP	1.3.6.1.4.1.6080.3.1.9.1.1	OCTET STRING	accessible-for-notify	IP address of NMS station accessing the unit.
OCT userName	1.3.6.1.4.1.6080.3.1.9.1.2	OCTET STRING	accessible-for-notify	User accessing the unit.
brwaveConformance	1.3.6.1.4.1.6080.3.1.10
brwaveRadioGroups	1.3.6.1.4.1.6080.3.1.10.1
brwaveCommonGroup	1.3.6.1.4.1.6080.3.1.10.1.1			Collection of common objects.
brwaveFactoryGroup	1.3.6.1.4.1.6080.3.1.10.1.2			Collection of factory setup objects.
brwaveStatusGroup	1.3.6.1.4.1.6080.3.1.10.1.3			Collection of status objects.
brwaveCompliances	1.3.6.1.4.1.6080.3.1.10.2

RFC description

Provides management information for BridgeWave wireless radio communication equipment.

Start monitoring BridgeWave millimeter-wave point-to-point radio links (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BRWAVE-RADIO-MIB

What Is BRWAVE-RADIO-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description