| OID symbolic | OID numeric | Type | Access | Description |
|---|
| bintec | 1.3.6.1.4.1.272 | | | |
| bibo | 1.3.6.1.4.1.272.4 | | | |
| brrp | 1.3.6.1.4.1.272.4.40 | | | |
| biboBrrpOperTable | 1.3.6.1.4.1.272.4.40.1 | | not-accessible | Operations table for a BRRP router which consists of a
sequence (i.e., one or more conceptual rows) of
'biboBrrpOperEntry' items. |
| biboBrrpOperEntry | 1.3.6.1.4.1.272.4.40.1.1 | | not-accessible | An entry in the biboBrrpOperTable containing the operational
characteristics of a virtual router. On a BRRP router,
a given virtual router is identified by a combination
of the IF index and VRID.
Rows in the table cannot be modified unless the value
of `biboBrrpOperAdminState' is `disabled' and the
`biboBrrpOperState' has transitioned to `initialize'. |
| INT biboBrrpOperVrId | 1.3.6.1.4.1.272.4.40.1.1.1 | INTEGER | read-write | This object contains the Virtual Router Identifier (VRID). |
| INT biboBrrpVirtIfIndex | 1.3.6.1.4.1.272.4.40.1.1.2 | INTEGER | read-write | The index of the virtual interface used by the virtual router. |
| IP biboBrrpOperMasterIpAddr | 1.3.6.1.4.1.272.4.40.1.1.3 | IpAddress | read-write | The master router's real (primary) IP address. This is
the IP address listed as the source in BRRP advertisement
last received by this virtual router. |
| INT biboBrrpOperState | 1.3.6.1.4.1.272.4.40.1.1.4 | INTEGER | read-only | The current state of the virtual router. This object has
four defined values:
- `initialize', which indicates that all the
virtual router is waiting for a startup event.
- `backup', which indicates the virtual router is
monitoring the availability of the master router.
- `master', which indicates that the virtual router
is forwarding packets for IP addresses that are
associated with this router.
Setting the `brrpOperAdminState' object (below) initiates
transitions in the value of this object. |
| INT biboBrrpOperAdminState | 1.3.6.1.4.1.272.4.40.1.1.5 | INTEGER | read-write | This object will enable/disable the virtual router
function. Setting the value to `up', will transition
the state of the virtual router from `initialize' to `backup'
or `master', depending on the value of `brrpOperPriority'.
Setting the value to `down', will transition the
router from `master' or `backup' to `initialize'. State
transitions may not be immediate; they sometimes depend on
other factors, such as the interface (IF) state.
The `brrpOperAdminState' object must be set to `down' prior
to modifying the other read-only objects in the conceptual
row. The value of the `brrpOperRowStatus' object (below)
must be `active', signifying that the conceptual row
is valid (i.e., the objects are correctly set),
in order for this object to be set to `up'.
Use `delete' to delete this table entry permanently. |
| INT biboBrrpOperPriority | 1.3.6.1.4.1.272.4.40.1.1.6 | INTEGER | read-write | This object specifies the priority to be used for the
virtual router master election process. Higher values imply
higher priority.
A priority of '0', although not settable, is sent by
the master router to indicate that this router has ceased
to participate in BRRP and a backup virtual router should
transition to become a new master.
A priority of 255 is used for the router that owns the
associated IP address(es). |
| INT biboBrrpOperAuthType | 1.3.6.1.4.1.272.4.40.1.1.7 | INTEGER | read-write | Authentication type used for BRRP protocol exchanges between
virtual routers. This value of this object is the same for a
given ifIndex.
New enumerations to this list can only be added via a new
RFC on the standards track. |
| OCT biboBrrpOperAuthKey | 1.3.6.1.4.1.272.4.40.1.1.8 | OCTET STRING | read-write | The Authentication Key. This object is set according to
the value of the 'brrpOperAuthType' object
('simpleTextPassword' or 'ipAuthenticationHeader'). If the
length of the value is less than 16 octets, the agent will
left adjust and zero fill to 16 octets. The value of this
object is the same for a given ifIndex.
When read, biboBrrpOperAuthKey always returns an Octet String
of length zero. |
| INT biboBrrpOperAdvertisementInterval | 1.3.6.1.4.1.272.4.40.1.1.9 | INTEGER | read-write | The time interval, in seconds, between sending
advertisement messages. Only the master router sends
BRRP advertisements. |
| INT biboBrrpOperMasterDownRetries | 1.3.6.1.4.1.272.4.40.1.1.10 | INTEGER | read-write | Calculation of the MasterDownInterval from RFC 2338:
Skew_Time = ((256 - Priority) / 256)
MasterDownInterval = (MasterDownRetries
* AdvertisementInterval)
+ Skew_Time |
| INT biboBrrpOperPreemptMode | 1.3.6.1.4.1.272.4.40.1.1.11 | INTEGER | read-write | Controls whether a higher priority virtual router will
preempt a lower priority master. |
| TIK biboBrrpOperVirtualRouterUpTime | 1.3.6.1.4.1.272.4.40.1.1.12 | TimeTicks | read-only | This is the value of the `sysUpTime' object when this
virtual router (i.e., the `brrpOperState') transitioned
out of `initialized'. |
| INT biboBrrpMasterIfIndex | 1.3.6.1.4.1.272.4.40.1.1.14 | INTEGER | read-write | The index of the master interface controlling the virtual router. |
| INT biboBrrpOperDecrPrio | 1.3.6.1.4.1.272.4.40.1.1.15 | INTEGER | read-only | This is the value currently decremented from the virtual router
priority to be used for the virtual router master election process
Actual priority = (biboBrrpOperPriority - biboBrrpOperDecrPrio)
This value could be either '0' or 'aliveSlaveBrrpDecrPrio':
- it is set to 'aliveSlaveBrrpDecrPrio' when the alive surveillance
(aliveSlaveBrrpState) triggers 'decrPrio' while this router state
is 'up' (biboBrrpOperState).
- it is cleared to '0' when the alive surveillance
(aliveSlaveBrrpState) triggers 'up' while this router state
is already 'up' (biboBrrpOperState).
The default value is '0'. |
| biboBrrpRouterStatsTable | 1.3.6.1.4.1.272.4.40.2 | | not-accessible | Table of virtual router statistics. |
| biboBrrpRouterStatsEntry | 1.3.6.1.4.1.272.4.40.2.1 | | not-accessible | An entry in the table, containing statistics information
about a given virtual router. |
| INT biboBrrpStatsVrId | 1.3.6.1.4.1.272.4.40.2.1.1 | INTEGER | read-only | This object contains the Virtual Router Identifier (VRID). |
| INT biboBrrpStatsIfIndex | 1.3.6.1.4.1.272.4.40.2.1.2 | INTEGER | read-only | The index of the virtual interface used by the virtual router. |
| CTR biboBrrpStatsBecomeMaster | 1.3.6.1.4.1.272.4.40.2.1.3 | Counter | read-only | The total number of times that this virtual router's state
has transitioned to MASTER. |
| CTR biboBrrpStatsAdvertiseRcvd | 1.3.6.1.4.1.272.4.40.2.1.4 | Counter | read-only | The total number of BRRP advertisements received by this
virtual router. |
| CTR biboBrrpStatsAdvertiseIntervalErrors | 1.3.6.1.4.1.272.4.40.2.1.5 | Counter | read-only | The total number of BRRP advertisement packets received
for which the advertisement interval is different than the
one configured for the local virtual router. |
| CTR biboBrrpStatsAuthFailures | 1.3.6.1.4.1.272.4.40.2.1.6 | Counter | read-only | The total number of BRRP packets received that do not pass
the authentication check. |
| CTR biboBrrpStatsIpTtlErrors | 1.3.6.1.4.1.272.4.40.2.1.7 | Counter | read-only | The total number of BRRP packets received by the virtual
router with IP TTL (Time-To-Live) not equal to 255. |
| CTR biboBrrpStatsInvalidTypePktsRcvd | 1.3.6.1.4.1.272.4.40.2.1.8 | Counter | read-only | The number of BRRP packets received by the virtual router
with an invalid value in the 'type' field. |
| CTR biboBrrpStatsInvalidAuthType | 1.3.6.1.4.1.272.4.40.2.1.9 | Counter | read-only | The total number of packets received with an unknown
authentication type. |
| CTR biboBrrpStatsAuthTypeMismatch | 1.3.6.1.4.1.272.4.40.2.1.10 | Counter | read-only | The total number of packets received with 'Auth Type' not
equal to the locally configured authentication method
(`brrpOperAuthType'). |
| CTR biboBrrpStatsPacketLengthErrors | 1.3.6.1.4.1.272.4.40.2.1.11 | Counter | read-only | The total number of packets received with a packet length
less than the length of the BRRP header. |
| CTR biboBrrpStatsChecksumErrors | 1.3.6.1.4.1.272.4.40.2.1.12 | Counter | read-only | The total number of BRRP packets received with an invalid
BRRP checksum value. |
| CTR biboBrrpStatsVersionErrors | 1.3.6.1.4.1.272.4.40.2.1.13 | Counter | read-only | The total number of BRRP packets received with an unknown
or unsupported version number. |
