BLADETYPE2-TRAP-MIB

All MIBs › BLADETYPE2-TRAP-MIB

Category: Alarm and Event Management, Vendor: HP/HPE

Description: Defines trap notifications for hardware and network events on HP BladeSystem Type 2 blade modules.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BLADETYPE2-TRAP-MIB?

BLADETYPE2-TRAP-MIB is an HP BladeSystem MIB defining trap notifications for the Type 2 blade-system network interconnect module, covering hardware and network fault events. It exposes trap definitions such as bt2Traps, along with a display-string object (bt2SwTrapDisplayString) used to carry human-readable trap descriptions, rather than a large table of pollable counters. This module's role is purely fault/event notification — monitoring hardware and network conditions on the blade interconnect module by pushing traps when something changes state, rather than being polled continuously for status. It's a companion trap module to a corresponding BladeSystem Type 2 management MIB, so it depends on that module's object/status model for context around each trap. It's deployed within HP BladeSystem enclosures, on the embedded switch/interconnect module monitoring blade server network connectivity, with each trap identified by a specific BLADETYPE2-TRAP-MIB OID.

IPNetwork Monitor allows you to monitor SNMP objects defined in BLADETYPE2-TRAP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP BladeSystem Type 2 interconnect/switch module

Monitoring Examples

This module is primarily a trap-definition module rather than a source of pollable runtime data, so there is no ongoing polling scenario to describe from bt2Traps and bt2SwTrapDisplayString alone. An SNMP manager would instead configure trap reception for bt2Traps so that when a hardware or network fault occurs on the interconnect module, the event arrives with a bt2SwTrapDisplayString describing the condition. This supports asynchronous fault alerting rather than periodic status polling.

What Can Be Monitored

hardware/network fault trap events
trap display-string fault descriptions

Imported Objects

From BLADETYPE2-NETWORK-MIB

ipCurCfgGwAddr	OBJECT-TYPE
ipCurCfgGwIndex	OBJECT-TYPE
vrrpCurCfgIfIndx	OBJECT-TYPE
vrrpCurCfgIfPasswd	OBJECT-TYPE
vrrpCurCfgVirtRtrAddr	OBJECT-TYPE
vrrpCurCfgVirtRtrIndx	OBJECT-TYPE

From BLADETYPE2-PHYSICAL-MIB

stgCurCfgIndex

OBJECT-TYPE

From BLADETYPE2-SWITCH-MIB

agChassis	OBJECT-TYPE
agRackId	OBJECT-TYPE
agSlotNumber	OBJECT-TYPE

From HP-SWITCH-PL-MIB

hpSwitchBladeType2-Mgmt

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

OBJECT-TYPE

From RFC1213-MIB

DisplayString
sysContact
sysLocation
sysName

OIDs

OID symbolic	OID numeric	Type	Access	Description
bt2Traps	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7
NTF bt2SwPrimaryPowerSupplyFailure	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.1			A bt2SwPrimaryPowerSupplyFailure trap signifies that the primary power supply failed.
NTF bt2SwDefGwUp	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.2			A bt2SwDefGwUp trap signifies that the default gateway is alive.
NTF bt2SwDefGwDown	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.3			A bt2SwDefGwDown trap signifies that the default gateway is down.
NTF bt2SwDefGwInService	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.4			A bt2SwDefGwEnabled trap signifies that the default gateway is up and in service.
NTF bt2SwDefGwNotInService	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.5			A bt2SwDefGwDisabled trap signifies that the default gateway is alive but not in service.
NTF bt2SwVrrpNewMaster	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.16			The bt2SwVrrpNewMaster trap indicates that the sending agent has transitioned to 'Master' state.
NTF bt2SwVrrpNewBackup	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.17			The bt2SwVrrpNewBackup trap indicates that the sending agent has transitioned to 'Backup' state.
NTF bt2SwVrrpAuthFailure	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.18			A bt2SwVrrpAuthFailure trap signifies that a packet has been received from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type. Implementation of this trap is optional.
NTF bt2SwLoginFailure	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.19			A bt2SwLoginFailure trap signifies that someone failed to enter a valid username/password combination.
NTF bt2SwTempExceedThreshold	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.22			A bt2SwTempExceedThreshold trap signifies that the switch temperature has exceeded maximum safety limits.
NTF bt2SwRackLocationChange	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.26			A bt2SwRackLocationChange trap signifies that the rack location has been changed.
NTF bt2SwApplyComplete	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.27			A bt2SwApplyComplete signifies that new configuration has been applied.
NTF bt2SwSaveComplete	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.28			A bt2SwApplyComplete signifies that new configuration has been saved.
NTF bt2SwFwDownloadSucess	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.29			A bt2SwFwDownloadSuccess signifies that firmware has been downloaded to [image1\|image2\|boot image].
NTF bt2SwFwDownloadFailure	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.30			A bt2SwFwDownloadFailure signifies that firmware downloaded failed to [image1\|image2\|boot image].
NTF bt2SwTempReturnThreshold	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.31			A bt2SwTempReturnThreshold trap signifies that the switch temperature has returned below maximum safety limits.
NTF bt2SwFanFailure	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.32			A bt2SwFanFailure trap signifies that the fan failure has been detected.
NTF bt2SwFanFailureFixed	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.33			A bt2SwFanFailureFixed trap signifies that the fan failure has been fixed.
NTF bt2SwUfdfoLtMFailure	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.34			A bt2SwUfdfoLtMFailure trap signifies that a LtM link is down.
NTF bt2SwUfdfoLtMUP	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.35			A bt2SwUfdfoLtMUP trap signifies that a LtM link is up.
NTF bt2SwUfdfoGlobalEna	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.36			A bt2SwUfdfoGlobalEna trap signifies that Global UFD is enabled.
NTF bt2SwUfdfoGlobalDis	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.37			A bt2SwUfdfoGlobalDis trap signifies that Global UFD is disabled.
NTF bt2SwUfdfoLtDAutoEna	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.38			A bt2SwUfdfoLtDAutoEna trap signifies that a LtD link is Auto Enabled.
NTF bt2SwUfdfoLtDAutoDis	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.39			A bt2SwUfdfoLtDAutoDis trap signifies that a LtD link is Auto Disabled.
NTF bt2SwCubeInserted	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.40			A Cube was inserted.
NTF bt2SwCubeRemoved	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.41			A Cube was removed.
NTF bt2SwStgNewRoot	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.42			A bt2SwStgNewRoot trap signifies that the bridge has become the new root of the STG.
NTF bt2SwCistNewRoot	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.43			A bt2SwCistNewRoot trap signifies that the bridge has become the new root of the CIST.
NTF bt2SwStgTopologyChanged	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.44			A bt2SwStgTopologyChanged trap signifies that there was a STG topology change.
NTF bt2SwCistTopologyChanged	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.45			A bt2SwCistTopologyChanged trap signifies that there was a CIST topology change.
NTF bt2SwHotlinksMasterUp	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.46			A bt2SwHotlinksMasterUp trap signifies that the Master interface is active.
NTF bt2SwHotlinksMasterDn	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.47			A bt2SwHotlinksMasterDn trap signifies that the Master interface is not active.
NTF bt2SwHotlinksBackupUp	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.48			A bt2SwHotlinksBackupUp trap signifies that the Backup interface is active.
NTF bt2SwHotlinksBackupDn	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.49			A bt2SwHotlinksBackupDn trap signifies that the Backup interface is not active.
NTF bt2SwHotlinksNone	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.50			A bt2SwHotlinksNone trap signifies that there are no active interfaces.
STR bt2SwTrapDisplayString	1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.1000	DisplayString	read-only	Temporary string object used to store information being sent in an Bladetype2 Switch trap.

RFC description

Trap definitions for Hewlett Packard BladeType2 switches including power supply failures and gateway status.

Start monitoring HP BladeSystem Type 2 embedded network switch modules with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BLADETYPE2-TRAP-MIB

What Is BLADETYPE2-TRAP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description