BLADETYPE2-SWITCH-MIB :: agConfigForNxtReset

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsBLADETYPE2-SWITCH-MIBagConfigForNxtReset

agConfigForNxtReset

Module: BLADETYPE2-SWITCH-MIB

OID (symbolic): BLADETYPE2-SWITCH-MIB::agConfigForNxtReset

OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The configuration information to be loaded from at next reset.

The following values are writable: active(2)...active configuration block backup(3)...backup configuration block default(4)..default configuration block

What is agConfigForNxtReset?

Specifies which configuration block — active, backup, or factory default — the switch will load from when it next reboots. This allows an administrator to pre-select an alternate configuration to boot into before initiating a reset.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.8
snmpwalk -v2c -c public <target> BLADETYPE2-SWITCH-MIB::agConfigForNxtReset

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.8.1
snmpget -v2c -c public <target> BLADETYPE2-SWITCH-MIB::agConfigForNxtReset.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.8.1 i <value>

Start monitoring HP BladeSystem Type 2 embedded network switch modules with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADETYPE2-SWITCH-MIB::agConfigForNxtReset OID value, configure state conditions and alerts, and monitor any HP BladeSystem Type 2 embedded network switch modules from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.3hpsystemCLJ8500-MIB
1.3.6.1.4.1.11.2.3.7netElementHP-ICF
1.3.6.1.4.1.11.2.3.7.11hpEtherSwitchHP-ICF-OID
1.3.6.1.4.1.11.2.3.7.11.33hpSwitchProliantHP-ICF-OID
1.3.6.1.4.1.11.2.3.7.11.33.1hpSwitchModuleBladetype2HP-SWITCH-PL-MIB
1.3.6.1.4.1.11.2.3.7.11.33.1.2hpSwitchBladeType2_MgmtHP-SWITCH-PL-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1agentBLADETYPE2-SWITCH-MIB
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1agentConfigBLADETYPE2-SWITCH-MIB
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1agSystemBLADETYPE2-SWITCH-MIB
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.8agConfigForNxtResetBLADETYPE2-SWITCH-MIB