All MIBs › BLADETYPE2-SWITCH-MIB › agNewCfgSyslogTrapCli
agNewCfgSyslogTrapCli
Module: BLADETYPE2-SWITCH-MIB
OID (symbolic): BLADETYPE2-SWITCH-MIB::agNewCfgSyslogTrapCli
OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Enable or disable CLI generated error syslog and SNMP trap, in the new_configuration block.
What is agNewCfgSyslogTrapCli?
Controls whether CLI-generated errors produce syslog messages and SNMP traps, as staged in the pending (new) configuration on a BladeType2 switch. Writing to this object queues the change for the next configuration commit.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.7 snmpwalk -v2c -c public <target> BLADETYPE2-SWITCH-MIB::agNewCfgSyslogTrapCli
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.7.1 snmpget -v2c -c public <target> BLADETYPE2-SWITCH-MIB::agNewCfgSyslogTrapCli.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.7.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> agNewCfgSyslogTrapCli.1
Start monitoring HP BladeSystem Type 2 embedded network switch modules with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADETYPE2-SWITCH-MIB::agNewCfgSyslogTrapCli OID value, configure state conditions and alerts, and monitor any HP BladeSystem Type 2 embedded network switch modules from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-ICF |
| 1.3.6.1.4.1.11.2.3.7.11 | hpEtherSwitch | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.33 | hpSwitchProliant | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.33.1 | hpSwitchModuleBladetype2 | HP-SWITCH-PL-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2 | hpSwitchBladeType2_Mgmt | HP-SWITCH-PL-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1 | agent | BLADETYPE2-SWITCH-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1 | agentConfig | BLADETYPE2-SWITCH-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5 | agSyslog | BLADETYPE2-SWITCH-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12 | agLog | BLADETYPE2-SWITCH-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.7 | agNewCfgSyslogTrapCli | BLADETYPE2-SWITCH-MIB |