BIANCA-BRICK-QOS-MIB

All MIBs › BIANCA-BRICK-QOS-MIB

Category: Quality of Service, Vendor: bintec

Description: Configures and monitors Quality of Service traffic shaping and prioritization on bintec elmeg BIANCA/BRICK routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BIANCA-BRICK-QOS-MIB?

BIANCA-BRICK-QOS-MIB is a bintec elmeg BIANCA/BRICK enterprise MIB for configuring and monitoring Quality of Service traffic shaping and prioritization on the router. It exposes QoS policy configuration (traffic classes, shaping/prioritization rules) and related statistics for traffic handled under those policies. As a software/configuration-status MIB, it's used to monitor whether QoS policies are correctly applied and whether traffic shaping counters indicate congestion or policy violations, rather than hardware health. No sample objects or module description are available in the provided material to confirm dependency on other standard MIBs. It's deployed on bintec elmeg BIANCA/BRICK routers where WAN bandwidth needs prioritization across multiple traffic classes (e.g., voice vs. data). Engineers can download the BIANCA-BRICK-QOS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in BIANCA-BRICK-QOS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

bintec elmeg BIANCA/BRICK router

Monitoring Examples

No sample_objects were provided, so no concrete object/table names can be cited from the input for this module. In general terms, an operator would expect to poll QoS class statistics to verify that prioritized traffic (e.g., voice) is meeting its shaping targets and that lower-priority traffic is being throttled as configured. The exact object names would need to be looked up in the actual MIB file.

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
TimeTicks

OIDs

OID symbolic	OID numeric	Type	Access	Description
org	1.3
dod	1.3.6
internet	1.3.6.1
private	1.3.6.1.4
enterprises	1.3.6.1.4.1
bintec	1.3.6.1.4.1.272
bibo	1.3.6.1.4.1.272.4
qos	1.3.6.1.4.1.272.4.27
qosIfTable	1.3.6.1.4.1.272.4.27.1		not-accessible	The qosIfTable enables QoS policies on the interface specified by qosIfIndex (interface index). Creating entries: Entries are created by assigning a value to the qosIfIndex object. Deleting entries: Entries are removed by setting an entry's qosIfType object to 'delete'.
qosIfEntry	1.3.6.1.4.1.272.4.27.1.1		not-accessible
INT qosIfIndex	1.3.6.1.4.1.272.4.27.1.1.1	INTEGER	read-write	Unique interface index
INT qosIfType	1.3.6.1.4.1.272.4.27.1.1.2	INTEGER	read-write	This object defines the queueing and scheduling algorithm used on the related interface, possible values: pq(1) = priority queueing wrr(2) = weighted round-robin scheduling wfq(3) = weighted fair queuing scheduling disable(8) = disable this entry delete(9) = delete this entry.
INT qosIfMaxTxRate	1.3.6.1.4.1.272.4.27.1.1.3	INTEGER	read-write	This object enables traffic shaping on the related interface, if set to zero (0) there is no shaping active. Otherwise this variable defines the maximum amount of bits per second to be transmitted.
qosIfStatTable	1.3.6.1.4.1.272.4.27.2		not-accessible	The qosIfStatTable contains statistical QoS-specific information for the interface specified by qosIfStatIndex (interface index). Only the system can add or delete entries to this table.
qosIfStatEntry	1.3.6.1.4.1.272.4.27.2.1		not-accessible
INT qosIfStatIndex	1.3.6.1.4.1.272.4.27.2.1.1	INTEGER	read-only	The unique interface index.
CTR qosIfStatOutPkts	1.3.6.1.4.1.272.4.27.2.1.2	Counter	read-only	The number of packets transmitted on the related interface since its last change to the 'up' state.
CTR qosIfStatOutOctets	1.3.6.1.4.1.272.4.27.2.1.3	Counter	read-only	The number of octets transmitted on the related interface since its last change to the 'up' state.
CTR qosIfStatPktsQueued	1.3.6.1.4.1.272.4.27.2.1.6	Counter	read-only	The number of data packets enqueued and waiting to be sent across the related interface.
CTR qosIfStatOctetsQueued	1.3.6.1.4.1.272.4.27.2.1.7	Counter	read-only	The amount of data (in octets) enqueued waiting to be sent across the related interface.
CTR qosIfStatPktsDropped	1.3.6.1.4.1.272.4.27.2.1.8	Counter	read-only	The number of data packets dropped during congestion.
CTR qosIfStatOctetsDropped	1.3.6.1.4.1.272.4.27.2.1.9	Counter	read-only	The representation of qosIfStatPktsDropped in octets.
qosPolicyTable	1.3.6.1.4.1.272.4.27.3		not-accessible	The qosPolicyTable enables QoS policies for the packet class specified by qosPolicyIfIndex (interface index), qosPolicyType and qosPolicyClassId. Creating entries: Entries are created by assigning a value to the qosPolicyIfIndex object. Deleting entries: Entries are removed by setting an entry's qosPolicyType object to 'delete'.
qosPolicyEntry	1.3.6.1.4.1.272.4.27.3.1		not-accessible
INT qosPolicyIfIndex	1.3.6.1.4.1.272.4.27.3.1.1	INTEGER	read-write	The unique interface index
INT qosPolicyType	1.3.6.1.4.1.272.4.27.3.1.2	INTEGER	read-write	This objects defines in conjunction with ipQoSClassId and qosPolicyClassId the related type of packet classes for this QoS policy, possible values: class-based(1) = policy for non-high-priority packets high-priority(2) = policy for high-priority packets default(3) = policy for packets not matching otherwise.
INT qosPolicyClassId	1.3.6.1.4.1.272.4.27.3.1.3	INTEGER	read-write	Defines in conjunction with ipQoSClassId and qosPolicyType the QoS policy to be applied on the classified IP traffic.
INT qosPolicyPriority	1.3.6.1.4.1.272.4.27.3.1.4	INTEGER	read-write	The relative priority for this packet class to be used for the packet scheduling as described via qosIfType.
INT qosPolicyWeight	1.3.6.1.4.1.272.4.27.3.1.5	INTEGER	read-write	The relative weight for this packet class to be used for the packet scheduling as described via qosIfType.
INT qosPolicyShaper	1.3.6.1.4.1.272.4.27.3.1.6	INTEGER	read-write	This objects describes the traffic-shaping algorithm to be used in order to limit the bandwidth for the related packet class, possible values: none(1) = no shaping defined token-bucket(2) = token-bucket traffic shaper.
INT qosPolicyCongestionAvoidance	1.3.6.1.4.1.272.4.27.3.1.7	INTEGER	read-write	This objects defines a packet dropping algorithm to use if more than qosPolicyLowerThreshold octets are enqueued.
INT qosPolicyDropAlgorithm	1.3.6.1.4.1.272.4.27.3.1.9	INTEGER	read-write	This objects defines the packet dropping algorithm to apply if more than qosPolicyUpperThreshold octets are currently enqueued, possible values: tail-drop(1) = drop all newly arriving packets head-drop(2) = drop packets at the queue head enqueue newly arriving packets random-drop(3) = drop arriving or enqueued packets randomly.
INT qosPolicyTxRate	1.3.6.1.4.1.272.4.27.3.1.17	INTEGER	read-write	This object enables bandwidth limitation for the related class, if set to zero (0) there is no limitation policy. Otherwise this variable defines the maximum amount of bits per second to be send.
INT qosPolicyTxRateLimitation	1.3.6.1.4.1.272.4.27.3.1.18	INTEGER	read-write	This objects determines the policy for the related class if the transmission rate limit defined by qosPolicyTxRate is reached. When set to not-bounded(1) allocation of remaining bandwidth not consumed by other classes is allowed. When set to bounded(2), qosPolicyTxRate is strict limitation for the long-term bandwidth consumption.
INT qosPolicyTxBurstSize	1.3.6.1.4.1.272.4.27.3.1.19	INTEGER	read-write	The maximum number of octets in a single transmission burst.
INT qosPolicyLowerThreshold	1.3.6.1.4.1.272.4.27.3.1.20	INTEGER	read-write	This variable defines the lower or minimum queue depth threshold for packet dropping algorithm used for congestion avoidance (see qosPolicyCongestionAvoidance).
INT qosPolicyUpperThreshold	1.3.6.1.4.1.272.4.27.3.1.21	INTEGER	read-write	This variable defines the upper or maximum queue depth threshold at which - depending on qosPolicyDropAlgorithm - all newly arriving or packets enqueued former will be dropped.
qosPolicyStatTable	1.3.6.1.4.1.272.4.27.4		not-accessible	The qosPolicyStatTable contains statistical QoS-specific information for the policy specified by qosPolicyStatIfIndex (interface index), qosPolicyStatType and qosPolicyStatClassId. Only the system can add or delete entries to this table.
qosPolicyStatEntry	1.3.6.1.4.1.272.4.27.4.1		not-accessible
INT qosPolicyStatIfIndex	1.3.6.1.4.1.272.4.27.4.1.1	INTEGER	read-only	The unique interface index
INT qosPolicyStatType	1.3.6.1.4.1.272.4.27.4.1.2	INTEGER	read-only	The related type of packet classes for this QoS policy (see qosPolicyType for further explanation).
INT qosPolicyStatClassId	1.3.6.1.4.1.272.4.27.4.1.3	INTEGER	read-only	Unique packet class ID
CTR qosPolicyStatOutPkts	1.3.6.1.4.1.272.4.27.4.1.4	Counter	read-only	The number of packets sent belonging to the related packet class.
CTR qosPolicyStatOutOctets	1.3.6.1.4.1.272.4.27.4.1.5	Counter	read-only	The representation of qosPolicyStatOutPkts in octets.
CTR qosPolicyStatPktsQueued	1.3.6.1.4.1.272.4.27.4.1.8	Counter	read-only	The number of data packets of the related class enqueued and waiting to be sent.
CTR qosPolicyStatOctetsQueued	1.3.6.1.4.1.272.4.27.4.1.9	Counter	read-only	The representation of qosPolicyStatPktsQueued in octets.
CTR qosPolicyStatPktsDropped	1.3.6.1.4.1.272.4.27.4.1.10	Counter	read-only	The number of data packets of the related class dropped during congestion.
CTR qosPolicyStatOctetsDropped	1.3.6.1.4.1.272.4.27.4.1.11	Counter	read-only	The representation of qosPolicyStatPktsDropped in octets

RFC description

BinTec BIANCA/BRICK QoS policies for interface traffic management and prioritization.

Start monitoring bintec BIANCA/BRICK ISDN/VPN routers (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BIANCA-BRICK-QOS-MIB

What Is BIANCA-BRICK-QOS-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description