AVIAT-RXPERFORMANCE-MIB

All MIBs › AVIAT-RXPERFORMANCE-MIB

Organization: Aviat Networks

Last Updated: 2014-01-21

Category: Vendor: Aviat

Description: Monitors receive path performance including signal strength, threshold crossings, and error rates on Aviat microwave radios.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is AVIAT-RXPERFORMANCE-MIB?

AVIAT-RXPERFORMANCE-MIB supports performance monitoring of the receiver on Aviat Networks microwave radio links, covering signal strength, threshold crossings, and receive-side error statistics. This is hardware performance monitoring specific to microwave radio equipment, giving visibility into RF signal degradation on the receive path before it escalates into a link outage. It likely depends on Aviat's broader radio system MIB tree for interface and system identity context surrounding the receiver data. It is deployed on Aviat point-to-point microwave radio links commonly used for telecom backhaul. Network engineers evaluating or troubleshooting this functionality can download the AVIAT-RXPERFORMANCE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in AVIAT-RXPERFORMANCE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Aviat Networks microwave radio (receiver)

Monitoring Examples

No object names were supplied for this MIB, so specific objects cannot be cited. Conceptually, an admin would poll a received-signal-level object and receive error-rate/BER counters, and would be alerted via threshold-crossing objects when RSL drops below a configured margin, indicating fading, interference, or antenna misalignment.

What Can Be Monitored

received signal level (RSL)
threshold-crossing alerts
receive error rate/BER

Imported Objects

From AVIAT-TEXTCONVENTION-MIB

AviatPowerLevel

From ENTITY-MIB

entPhysicalIndex

OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Gauge32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DateAndTime
TEXTUAL-CONVENTION
TruthValue

From STXN-GLOBALREGISTER-MIB

aviatModules

OBJECT-IDENTITY

How to Use in IPNetwork Monitor

Example using aviatRxPerformBerReadingMean OID:

Select an Aviat Networks microwave radio link (point-to-point backhaul) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type aviatRxPerformBerReadingMean into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. This is the mean reading of the Bit Error Ratio of the radio. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases between polls, since a rising count of errors, failures, or discards often points to a real underlying problem. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
aviatRxPerformanceModule	1.3.6.1.4.1.2509.9.15			This MIB module supports performance monitoring of the receiver on the radio.
aviatRxPerformanceConf	1.3.6.1.4.1.2509.9.15.1
aviatRxPerformanceGroups	1.3.6.1.4.1.2509.9.15.1.1
aviatRxPerformObjectGroup	1.3.6.1.4.1.2509.9.15.1.1.1			These are the objects in the Receiver Performance MIB.
aviatRxPerformanceCompl	1.3.6.1.4.1.2509.9.15.1.2
aviatRxPerformanceComplV1	1.3.6.1.4.1.2509.9.15.1.2.1			The implementation requirements for this MIB.
aviatRxPerformanceMIBObjs	1.3.6.1.4.1.2509.9.15.2
aviatRxPerformControlTable	1.3.6.1.4.1.2509.9.15.2.1		not-accessible	A table containing the indexes and reset values for a particular entity of the system.
aviatRxPerformControlEntry	1.3.6.1.4.1.2509.9.15.2.1.1		not-accessible	A row in the aviatRxPerformControlTable.
INT aviatRxPerformReset	1.3.6.1.4.1.2509.9.15.2.1.1.1	INTEGER	read-write	This object resets Rx Performance statistics. Setting all(2) will reset realtime, quarter hourly and daily statistics. Setting realtime(3), quarterhour(4) or daily(5) will reset only the selected type of statistics. If quarter hour or daily statistics are reset, then all saved statistics data of that type will be deleted including the current bin. Reading this object will return none(1).
G32 aviatRxPerformLastQHourChangeIndex	1.3.6.1.4.1.2509.9.15.2.1.1.2	Gauge32	read-only	This is the index number of the last entry in the aviatRxPerformQHourTable. This index number refers to the aviatRxPerformQHourPeriod index of the table.
G32 aviatRxPerformLastDayChangeIndex	1.3.6.1.4.1.2509.9.15.2.1.1.3	Gauge32	read-only	This is the index number of the last entry in the aviatRxPerformDayTable. This index number refers to the aviatRxPerformDayPeriod index of the table.
aviatRxPerformTable	1.3.6.1.4.1.2509.9.15.2.2		not-accessible	This is the table containing information about the radio receive path performance of each terminal in the domain. This performance data is updated every 1 second.
aviatRxPerformEntry	1.3.6.1.4.1.2509.9.15.2.2.1		not-accessible	This is an entry in the table containing the receiver performance data of an entity in the system.
AVI aviatRxPerformRslReadingMean	1.3.6.1.4.1.2509.9.15.2.2.1.3	AviatPowerLevel	read-only	This is the mean reading of the Receive Signal Level of the radio over the period since the start of monitoring.
AVI aviatRxPerformRslReadingCurrent	1.3.6.1.4.1.2509.9.15.2.2.1.4	AviatPowerLevel	read-only	This is the current reading of the Receive Signal Level of the radio.
AVI aviatRxPerformRslReadingMax	1.3.6.1.4.1.2509.9.15.2.2.1.5	AviatPowerLevel	read-only	This is the highest recorded reading of the Receive Signal Level of the radio since the start of monitoring.
AVI aviatRxPerformRslReadingMin	1.3.6.1.4.1.2509.9.15.2.2.1.6	AviatPowerLevel	read-only	This is the lowest recorded reading of the Receive Signal Level of the radio since the start of monitoring.
C64 aviatRxPerformBerReadingMeanEx	1.3.6.1.4.1.2509.9.15.2.2.1.7	Counter64	read-only	This is the mean reading of the Bit Error Ratio of the radio.
C64 aviatRxPerformBerReadingCurrent	1.3.6.1.4.1.2509.9.15.2.2.1.8	Counter64	read-only	This is the current reading of the Bit Error Ratio of the radio.
C64 aviatRxPerformBerReadingMax	1.3.6.1.4.1.2509.9.15.2.2.1.9	Counter64	read-only	This is the highest recorded reading of the Bit Error Ratio of the radio since the start of monitoring.
C64 aviatRxPerformBerReadingMin	1.3.6.1.4.1.2509.9.15.2.2.1.10	Counter64	read-only	This is the lowest recorded reading of the Bit Error Ratio of the radio since the start of monitoring.
G32 aviatRxPerformFrameLossSeconds	1.3.6.1.4.1.2509.9.15.2.2.1.11	Gauge32	read-only	This is the number of seconds that had one or more instances of lost frames since the start of monitoring.
AVI aviatRxPerformPackedData	1.3.6.1.4.1.2509.9.15.2.2.1.12	AviatPackedRxPerformData	read-only	This is all of the Performance data for this table, updated every 1 second, packed into a single object. This object is provided to guarantee a 'snapshot' collection of the performance measures in an entity. Slowly stepping through the aviatRxPerformTable may result in changing information being read.
aviatRxPerformQuarterHourTable	1.3.6.1.4.1.2509.9.15.2.3		not-accessible	This is the table containing information about the radio receive path performance of each terminal in the domain. The performance data recording is started at the next 15 minute boundry in the hour of the time when monitoring was initiated eg: 12:00, 12:15, 12:30 or 12:45. This performance data is recorded for 15 minute periods and the object is updated at the end of the period.
aviatRxPerformQuarterHourEntry	1.3.6.1.4.1.2509.9.15.2.3.1		not-accessible	This is an entry in the table containing the receiver performance data of an entity in the system for a 15 minute period.
G32 aviatRxPerformQHourIndex	1.3.6.1.4.1.2509.9.15.2.3.1.1	Gauge32	not-accessible	This is the row number referring to the receiver performance data of a particular entity in the system. The performance data in this table is updated every 15 minutes.
G32 aviatRxPerformQHourPeriod	1.3.6.1.4.1.2509.9.15.2.3.1.2	Gauge32	not-accessible	This is the unique row number referencing the 15 minute period during which this block of performance data was collected. This provides a unique index even if the table wraps back around.
DAT aviatRxPerformQHourDateAndTime	1.3.6.1.4.1.2509.9.15.2.3.1.4	DateAndTime	read-only	This is the date and time at the start of the 15 minute period during which this block of performance data was collected.
AVI aviatRxPerformQHourRslReadingMean	1.3.6.1.4.1.2509.9.15.2.3.1.5	AviatPowerLevel	read-only	This is the mean reading of the Receive Signal Level of the radio for the 15 minute period during which this block of performance data was collected.
AVI aviatRxPerformQHourRslReadingMax	1.3.6.1.4.1.2509.9.15.2.3.1.6	AviatPowerLevel	read-only	This is the highest recorded reading of the Receive Signal Level of the radio for the 15 minute period during which this block of performance data was collected.
AVI aviatRxPerformQHourRslReadingMin	1.3.6.1.4.1.2509.9.15.2.3.1.7	AviatPowerLevel	read-only	This is the lowest recorded reading of the Receive Signal Level of the radio for the 15 minute period during which this block of performance data was collected.
C64 aviatRxPerformQHourBerReadingMean	1.3.6.1.4.1.2509.9.15.2.3.1.8	Counter64	read-only	This is the mean reading of the Bit Error Ratio of the radio for the 15 minute period during which this block of performance data was collected.
C64 aviatRxPerformQHourBerReadingMax	1.3.6.1.4.1.2509.9.15.2.3.1.9	Counter64	read-only	This is the highest recorded reading of the Bit Error Ratio of the radio for the 15 minute period during which this block of performance data was collected.
C64 aviatRxPerformQHourBerReadingMin	1.3.6.1.4.1.2509.9.15.2.3.1.10	Counter64	read-only	This is the lowest recorded reading of the Bit Error Ratio of the radio for the 15 minute period during which this block of performance data was collected.
G32 aviatRxPerformQHourFrameLossSeconds	1.3.6.1.4.1.2509.9.15.2.3.1.11	Gauge32	read-only	This is the number of seconds that had one or more instances of lost frames for the 15 minute period during which this block of performance data was collected.
T/F aviatRxPerformQHourInvalidEntry	1.3.6.1.4.1.2509.9.15.2.3.1.12	TruthValue	read-only	This indicates the validity of the performance data in this row of the table. It is set to TRUE when the data becomes invalid due to the interval not being within ten seconds of its nominal length. Otherwise it is set to FALSE. This could be a result of a time-of-day change.
aviatRxPerformDayTable	1.3.6.1.4.1.2509.9.15.2.4		not-accessible	This is a table containing a collection of information about the radio receive path performance of each terminal in the domain. Performance data in this table is recorded for 1 day periods.
aviatRxPerformDayEntry	1.3.6.1.4.1.2509.9.15.2.4.1		not-accessible	This is an entry in the table containing performance data of a particular entity within the agent during a 1 day period.
G32 aviatRxPerformDayIndex	1.3.6.1.4.1.2509.9.15.2.4.1.1	Gauge32	not-accessible	This is the row number referring to the receiver performance data of a particular entity in the system. The performance data in this table is updated every 1 day period.
G32 aviatRxPerformDayPeriod	1.3.6.1.4.1.2509.9.15.2.4.1.2	Gauge32	not-accessible	This is the unique row number referencing the 1 day period during which this block of performance data was collected.
DAT aviatRxPerformDayDateAndTime	1.3.6.1.4.1.2509.9.15.2.4.1.4	DateAndTime	read-only	This is the date and time at the start of the Day period during which this block of performance data was collected.
AVI aviatRxPerformDayRslReadingMean	1.3.6.1.4.1.2509.9.15.2.4.1.5	AviatPowerLevel	read-only	This is the mean reading of the Receive Signal Level of the radio for the 1 day period during which this block of performance data was collected.
AVI aviatRxPerformDayRslReadingMax	1.3.6.1.4.1.2509.9.15.2.4.1.6	AviatPowerLevel	read-only	This is the highest recorded reading of the Receive Signal Level of the radio for the 1 day period during which this block of performance data was collected.
AVI aviatRxPerformDayRslReadingMin	1.3.6.1.4.1.2509.9.15.2.4.1.7	AviatPowerLevel	read-only	This is the lowest recorded reading of the Receive Signal Level of the radio for the 1 day period during which this block of performance data was collected.
C64 aviatRxPerformDayBerReadingMean	1.3.6.1.4.1.2509.9.15.2.4.1.8	Counter64	read-only	This is the mean reading of the Bit Error Ratio of the radio for the 1 day period during which this block of performance data was collected.
C64 aviatRxPerformDayBerReadingMax	1.3.6.1.4.1.2509.9.15.2.4.1.9	Counter64	read-only	This is the highest recorded reading of the Bit Error Ratio of the radio for the 1 Day period during which this block of performance data was collected.
C64 aviatRxPerformDayBerReadingMin	1.3.6.1.4.1.2509.9.15.2.4.1.10	Counter64	read-only	This is the lowest recorded reading of the Bit Error Ratio of the radio for the 1 Day period during which this block of performance data was collected.
G32 aviatRxPerformDayFrameLossSeconds	1.3.6.1.4.1.2509.9.15.2.4.1.11	Gauge32	read-only	This is the number of seconds that had one or more instances of lost frames for the 1 day period during which this block of performance data was collected.
T/F aviatRxPerformDayInvalidEntry	1.3.6.1.4.1.2509.9.15.2.4.1.12	TruthValue	read-only	This indicates the validity of the performance data in this row of the table. It is set to TRUE when the data becomes invalid due to the interval not being within ten seconds of its nominal length. Otherwise it is set to FALSE. This could be a result of a time-of-day change.

RFC description

This MIB module supports performance monitoring of the receiver on the radio.

Start monitoring Aviat Networks microwave radio links (point-to-point backhaul) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download AVIAT-RXPERFORMANCE-MIB