ATTOBRIDGE-MIB

All MIBs › ATTOBRIDGE-MIB

Organization: ATTO Technology, Inc.

Last Updated: 2005-09-20

Category: Fibre Channel and Storage

Description: Manages ATTO Technology Fibre Channel bridge devices, monitoring FC and SCSI port health and I/O performance.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ATTOBRIDGE-MIB?

ATTOBRIDGE-MIB is a vendor MIB from ATTO Technology for its Fibre Channel-to-SCSI bridge product line, used to connect legacy SCSI storage devices into Fibre Channel SANs. It exposes hardware environmental sensor data (temperature and voltage sensor tables with per-sensor status) alongside SNMP trap/feature enable flags for the bridge's management agent. This makes it a genuine hardware-health monitoring MIB: tempSensorStatus and voltageSensorStatus per sensor directly flag overheating or power-supply irregularities inside the bridge chassis, which is critical for a device sitting in the data path between SCSI storage and an FC SAN. It is a self-contained product MIB with no described dependency on other standard MIBs beyond basic SNMP trap delivery. It is deployed on ATTO FibreBridge appliances used in SANs to migrate or extend the life of SCSI-attached tape and disk storage. Engineers can download the ATTOBRIDGE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ATTOBRIDGE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ATTO Technology Fibre Channel-to-SCSI bridge

Monitoring Examples

An operator would poll tempSensorTable/tempSensorEntry (tempSensorIndex, temperature, tempSensorStatus) and voltageSensorTable/voltageSensorEntry (voltageSensorIndex, voltageSensorStatus) to catch a bridge chassis running hot or a power rail out of tolerance. If trapsEnabled and snmpExtendedEnabled are set, the bridge would also send a trap the moment a sensor status transitions out of normal, letting the SAN administrator react before the bridge shuts down or drops storage connectivity.

What Can Be Monitored

chassis temperature per sensor
sensor status (temperature/voltage)
voltage levels per sensor
SNMP trap/feature enable flags

Imported Objects

From RFC1155-SMI

IpAddress
enterprises
experimental

From RFC1213-MIB

DisplayString
ifIndex

From SNMPv2-SMI

NOTIFICATION-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
attotech	1.3.6.1.4.1.4547
NTF bridgeTempStatusChanged	1.3.6.1.4.1.4547.0.1			The bridgeTempStatusChanged trap supports notification of temperature status changes in the bridge. The following information is returned: tempSensorIndex - the sensor of concern tempSensorStatus - the current status of the sensor (normal, warning, critical) temperature - current temperature of the sensor Recommended severity level (for filtering): warning
NTF bridgeVoltageStatusChanged	1.3.6.1.4.1.4547.0.2			The bridgeVoltageStatusChanged trap supports notification of temperature status changes in the bridge. The following information is returned: voltageSensorIndex - the sensor of concern voltageSensorStatus - the current status of the sensor (normal, warning, critical) voltage - current temperature of the sensor Recommended severity level (for filtering): warning
NTF bridgeDeviceTransition	1.3.6.1.4.1.4547.0.4			The bridgeDeviceTransition trap supports notification of device online/offline status changes in the bridge. The following information is returned: deviceCacheIndex - the device of concern deviceSource - the description of the source device deviceState - the current state of the device Recommended severity level (for filtering): informational
NTF bridgeDeviceError	1.3.6.1.4.1.4547.0.5			The bridgeDeviceTransition trap supports notification of device online/offline status changes in the bridge. The following information is returned: errorSource - the description of the source device errorOpCode - the offending command errorSenseKey - the sense key returned by the device errorASC - the ASC returned by the device errorASCQ - the ASCQ returned by the device errorsSinceUpdate - the number of errors in the past 15sec Recommended severity level (for filtering): informational
products	1.3.6.1.4.1.4547.1
bridge	1.3.6.1.4.1.4547.1.2			Bridge Custom MIB
bridgeConfig	1.3.6.1.4.1.4547.1.2.1
INT trapsEnabled	1.3.6.1.4.1.4547.1.2.1.1	INTEGER	read-only	Indicates whether traps are enabled or disabled.
INT snmpUpdatesEnabled	1.3.6.1.4.1.4547.1.2.1.2	INTEGER	read-only	Indicates whether SNMP updates are enabled or disabled.
INT snmpExtendedEnabled	1.3.6.1.4.1.4547.1.2.1.3	INTEGER	read-only	Indicates whether extended SNMP is enabled or disabled.
bridgeStatus	1.3.6.1.4.1.4547.1.2.2
tempSensorTable	1.3.6.1.4.1.4547.1.2.2.1		not-accessible	The temperature sensor table stores information about the bridge temperature sensor.
tempSensorEntry	1.3.6.1.4.1.4547.1.2.2.1.1		not-accessible	The temperature sensor table stores information about the bridge temperature sensor.
INT tempSensorIndex	1.3.6.1.4.1.4547.1.2.2.1.1.1	INTEGER	read-only	Used to index the sensor in the temperature sensor table.
INT tempSensorStatus	1.3.6.1.4.1.4547.1.2.2.1.1.2	INTEGER	read-only	The current status of the sensor (normal, warning or critical).
INT temperature	1.3.6.1.4.1.4547.1.2.2.1.1.3	INTEGER	read-only	The current temperature of the sensor.
voltageSensorTable	1.3.6.1.4.1.4547.1.2.2.2		not-accessible	The voltage sensor table stores information about the bridge voltage sensor.
voltageSensorEntry	1.3.6.1.4.1.4547.1.2.2.2.1		not-accessible	The voltage sensor table stores information about the bridge voltage sensor.
INT voltageSensorIndex	1.3.6.1.4.1.4547.1.2.2.2.1.1	INTEGER	read-only	Used to index the sensor in the voltage sensor table.
INT voltageSensorStatus	1.3.6.1.4.1.4547.1.2.2.2.1.2	INTEGER	read-only	The current status of the sensor (normal, warning or critical).
INT voltage	1.3.6.1.4.1.4547.1.2.2.2.1.3	INTEGER	read-only	The current voltage of the sensor.
CTR deviceCount	1.3.6.1.4.1.4547.1.2.2.4	Counter	read-only	Number of devices present.
deviceCacheTable	1.3.6.1.4.1.4547.1.2.2.5		not-accessible	The device table stores information about the devices attached to the bridge.
deviceEntry	1.3.6.1.4.1.4547.1.2.2.5.1		not-accessible	The device table stores information about the devices attached to the bridge.
INT deviceCacheIndex	1.3.6.1.4.1.4547.1.2.2.5.1.1	INTEGER	read-only	Used to index the device table.
STR deviceSource	1.3.6.1.4.1.4547.1.2.2.5.1.2	DisplayString	read-only	A string representing the source interface, meaning the interface exposed to the host.
STR deviceDestination	1.3.6.1.4.1.4547.1.2.2.5.1.3	DisplayString	read-only	A string representing the destination interface, meaning the interface of the target device.
STR deviceType	1.3.6.1.4.1.4547.1.2.2.5.1.4	DisplayString	read-only	Device type (i.e. DISK, TAPE, etc.) of attached device.
STR deviceVendor	1.3.6.1.4.1.4547.1.2.2.5.1.5	DisplayString	read-only	Vendor name of attached device, from inquiry data.
STR deviceProduct	1.3.6.1.4.1.4547.1.2.2.5.1.6	DisplayString	read-only	Product name of attached device, from inquiry data.
STR deviceRevision	1.3.6.1.4.1.4547.1.2.2.5.1.7	DisplayString	read-only	Revision of attached device, from inquiry data.
INT deviceState	1.3.6.1.4.1.4547.1.2.2.5.1.8	INTEGER	read-only	The current state of the device (online, offline, or unknown).
CTR errorCount	1.3.6.1.4.1.4547.1.2.2.6	Counter	read-only	Number of errors that have occured since last bridge power-on or reset.
CTR errorsSinceUpdate	1.3.6.1.4.1.4547.1.2.2.7	Counter	read-only	Number of errors that have occured since last MIB scan, which is approximately every 15sec.
errorTable	1.3.6.1.4.1.4547.1.2.2.8		not-accessible	The Device Error table stores information about errors that have occurred with the devices attached to the bridge.
errorEntry	1.3.6.1.4.1.4547.1.2.2.8.1		not-accessible	The Device Error table stores information about errors that have occurred with the devices attached to the bridge.
INT errorIndex	1.3.6.1.4.1.4547.1.2.2.8.1.1	INTEGER	read-only	Used to index the error device table.
STR errorDateStamp	1.3.6.1.4.1.4547.1.2.2.8.1.2	DisplayString	read-only	Date at which the error occurred.
STR errorTimeStamp	1.3.6.1.4.1.4547.1.2.2.8.1.3	DisplayString	read-only	Time at which the error occurred.
STR errorInitiator	1.3.6.1.4.1.4547.1.2.2.8.1.4	DisplayString	read-only	A string representing the initiator which issued the failed command.
STR errorSource	1.3.6.1.4.1.4547.1.2.2.8.1.5	DisplayString	read-only	A string representing the source interface, meaning the interface exposed to the host, which is associated with the error.
INT errorOpCode	1.3.6.1.4.1.4547.1.2.2.8.1.6	INTEGER	read-only	OpCode of the command which failed.
INT errorSenseKey	1.3.6.1.4.1.4547.1.2.2.8.1.7	INTEGER	read-only	Sense Key returned as a result of the failed command.
INT errorASC	1.3.6.1.4.1.4547.1.2.2.8.1.8	INTEGER	read-only	ASC returned as a result of the failed command.
INT errorASCQ	1.3.6.1.4.1.4547.1.2.2.8.1.9	INTEGER	read-only	ASCQ returned as a result of the failed command.
OCT errorLogSense	1.3.6.1.4.1.4547.1.2.2.8.1.10	OCTET STRING	read-only	Log Sense returned as a result of the failed command.
bridgeTrapInfo	1.3.6.1.4.1.4547.1.2.3
INT trapMaxClients	1.3.6.1.4.1.4547.1.2.3.1	INTEGER	read-only	The maximum number of SNMP trap recipients supported by the unit.
trapClientTable	1.3.6.1.4.1.4547.1.2.3.3		not-accessible	A table containing a row for each IP address/port number that traps will be sent to.
trapClientEntry	1.3.6.1.4.1.4547.1.2.3.3.1		not-accessible	Ip/Port pair for a specific client.
INT trapClientIndex	1.3.6.1.4.1.4547.1.2.3.3.1.1	INTEGER	read-only	Used to index a trap client in the trapClientTable.
IP trapClientIpAddress	1.3.6.1.4.1.4547.1.2.3.3.1.2	IpAddress	read-only	The IP address of a client registered for traps in dotted notation.
INT trapClientPort	1.3.6.1.4.1.4547.1.2.3.3.1.3	INTEGER	read-only	The UDP port to send traps for this host. Normally this would be the standard trap port (162). This object is an index and must be specified to create a row in this table.
INT trapClientFilter	1.3.6.1.4.1.4547.1.2.3.3.1.4	INTEGER	read-only	This value defines the trap severity filter for this trap host. The unit will send traps to this host that have a severity level less than or equal to this value. The default value of this object is 'warning'.
INT trapClientRowState	1.3.6.1.4.1.4547.1.2.3.3.1.5	INTEGER	read-write	Specifies the state of the row. rowDestroy READ : Can never happen WRITE : Remove this row from the table. rowInactive READ : Indicates that this row does not exist, but that traps are not enabled to be sent to the target. WRITE : If the row does not exist, and the agent allows writes to the trap table, then a new row is created. The values of the optional columns will be set to default values. Traps are not enabled to be sent to the target. If the row already existed, then traps are disabled from being sent to the target. rowActive READ : Indicates that this row exists, and that traps are enabled to be sent to the target. WRITE : If the row does not exist, and the agent allows writes to the trap table, then a new row is created. The values of the optional columns will be set to default traps. If the row already exists then traps are enabled to be sent to the target. A value of rowActive or rowInactive must be specified to create a row in the table.

RFC description

Manages ATTO Bridge device configuration and trap settings.

Start monitoring ATTO Technology Fibre Channel-to-SCSI bridges (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ATTOBRIDGE-MIB

What Is ATTOBRIDGE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description