All MIBs › ATTOBRIDGE-MIB › trapClientRowState
trapClientRowState
Module: ATTOBRIDGE-MIB
OID (symbolic): ATTOBRIDGE-MIB::trapClientRowState
OID (numeric): 1.3.6.1.4.1.4547.1.2.3.3.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Specifies the state of the row. rowDestroy READ : Can never happen WRITE : Remove this row from the table. rowInactive READ : Indicates that this row does not exist, but that traps are not enabled to be sent to the target. WRITE : If the row does not exist, and the agent allows writes to the trap table, then a new row is created. The values of the optional columns will be set to default values. Traps are not enabled to be sent to the target. If the row already existed, then traps are disabled from being sent to the target. rowActive READ : Indicates that this row exists, and that traps are enabled to be sent to the target. WRITE : If the row does not exist, and the agent allows writes to the trap table, then a new row is created. The values of the optional columns will be set to default traps. If the row already exists then traps are enabled to be sent to the target.
A value of rowActive or rowInactive must be specified to create a row in the table.
What is trapClientRowState?
A read-write control used to manage the lifecycle of a trap client table row, such as marking it inactive or destroying (removing) it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4547.1.2.3.3.1.5 snmpwalk -v2c -c public <target> ATTOBRIDGE-MIB::trapClientRowState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4547.1.2.3.3.1.5.1 snmpget -v2c -c public <target> ATTOBRIDGE-MIB::trapClientRowState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4547.1.2.3.3.1.5.1 i <value>
Start monitoring ATTO Technology Fibre Channel-to-SCSI bridges (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ATTOBRIDGE-MIB::trapClientRowState OID value, configure state conditions and alerts, and monitor any ATTO Technology Fibre Channel-to-SCSI bridges (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4547 | attotech | ATTO-PRODUCTS-MIB |
| 1.3.6.1.4.1.4547.1 | attoProducts | ATTO-PRODUCTS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4547.1.2 | bridge | ATTOBRIDGE-MIB |
| 1.3.6.1.4.1.4547.1.2.3 | bridgeTrapInfo | ATTOBRIDGE-MIB |
| 1.3.6.1.4.1.4547.1.2.3.3 | trapClientTable | ATTOBRIDGE-MIB |
| 1.3.6.1.4.1.4547.1.2.3.3.1 | trapClientEntry | ATTOBRIDGE-MIB |
| 1.3.6.1.4.1.4547.1.2.3.3.1.5 | trapClientRowState | ATTOBRIDGE-MIB |