All MIBs › ATI-MIB
Description: Legacy combined MIB covering bridge, repeater/hub, and filter management for early Allied Telesis network switches and hubs
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ATI-MIB?
ATI-MIB is a legacy, combined Allied Telesis Industries module bundling bridge, repeater/hub, and port-security filter management for early-generation AT switches and hubs. It exposes a mix of configuration data (bridge and filter settings) and fault/security event objects, most notably an intruder-detection trap group that flags unauthorized MAC addresses appearing on a port. As a monitoring tool it is used to watch for security violations and unexpected topology changes on the hub/switch -- the atiTrapIntruderMacAddress, atiTrapIntruderModuleNumber, and atiTrapIntruderPortNumber objects together identify exactly which device, module, and port saw an unauthorized station, while atiPortChangeDirection reports link direction transitions. Being a legacy module, it predates and overlaps with later standard bridge MIBs (BRIDGE-MIB) and Allied Telesis's newer enterprise MIBs. It is found only on older AT hub and switch product lines still in service in legacy network segments. Engineers can download the ATI-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ATI-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Allied Telesis legacy hubs
- Allied Telesis legacy switches
Monitoring Examples
A security-conscious admin polling this MIB would watch for atiTrapIntruderMacAddress traps carrying the offending MAC along with atiTrapIntruderModuleNumber and atiTrapIntruderPortNumber to immediately localize an unauthorized device plugged into a specific hub port. A change reported via atiPortChangeDirection could indicate a port unexpectedly flipping between uplink and access roles. This gives operators a simple intrusion-detection signal on otherwise unmanaged legacy hub hardware.
What Can Be Monitored
- intruder MAC address detected
- module number of intrusion
- port number of intrusion
- port link direction changes
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter | |
| Gauge | |
| IpAddress | |
| NetworkAddress | |
| TimeTicks | |
| enterprises | |
| mib-2 |
From RFC1213-MIB
| DisplayString |
From SNMP-REPEATER-MIB
| rptrAddrTrackNewLastSrcAddress | OBJECT-TYPE |
From SNMPv2-TC
| TEXTUAL-CONVENTION |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| alliedTelesyn | 1.3.6.1.4.1.207 | |||
| products | 1.3.6.1.4.1.207.1 | |||
| bridge | 1.3.6.1.4.1.207.1.1 | |||
| atiBridgeagent | 1.3.6.1.4.1.207.1.1.1 | |||
| bridgesnmpd | 1.3.6.1.4.1.207.1.1.1.1 | |||
| atiBridge | 1.3.6.1.4.1.207.1.1.1.1.1 | |||
| repeater | 1.3.6.1.4.1.207.1.2 | |||
| NTF intruderProtectionTrap | 1.3.6.1.4.1.207.1.2.0.20 | This trap is replaced by atiIntruderProtectionTrap starting from firmware ver 3.0. AT-3100 and TurboStack product families only. This trap is sent when an Intruder Alert occurs on a port due to a received packet with an unauthorized source MAC address. Intruder Protection for the module must be enabled. The varBind list contains the MAC address of the intruder. | ||
| NTF atiIntruderProtectionTrap | 1.3.6.1.4.1.207.1.2.0.21 | AT-3100 and TurboStack product families only. This trap is sent when an Intruder Alert occurs on a module/port due to a received packet with an unauthorized source MAC address. Intruder Protection for the module must be enabled. The varBind list contains the module number, port number, and the MAC address of the intruder. | ||
| NTF atiRedundantPortChangeTrap | 1.3.6.1.4.1.207.1.2.0.22 | TurboStack product family only. This trap is sent when ports, which are configured for redundant links, change from primary to secondary or secondary to primary. | ||
| hub3600 | 1.3.6.1.4.1.207.1.2.1 | |||
| hub3100 | 1.3.6.1.4.1.207.1.2.10 | |||
| hubTurboStack | 1.3.6.1.4.1.207.1.2.65 | |||
| filterTable | 1.3.6.1.4.1.207.2 | |||
| ftConfig | 1.3.6.1.4.1.207.2.1 | not-accessible | Bridge FT operational parameters | |
| INT ftMaxAge | 1.3.6.1.4.1.207.2.1.1 | INTEGER | read-only | Seconds before an unreferenced dynamic FT entry is removed |
| INT ftMaxRemove | 1.3.6.1.4.1.207.2.1.2 | INTEGER | read-write | Max number table entries removed each time table overflows |
| INT ftMaxFilter | 1.3.6.1.4.1.207.2.1.3 | INTEGER | read-only | Max number FT entries |
| INT ftAgeTime | 1.3.6.1.4.1.207.2.1.4 | INTEGER | read-write | Seconds between FT table entries |
| INT ftMaxPerm | 1.3.6.1.4.1.207.2.1.5 | INTEGER | read-write | Max number of permanent FT entries. May be set to zero which causes all non-system FT entries to be deleted |
| INT ftForwMBcast | 1.3.6.1.4.1.207.2.1.6 | INTEGER | read-write | Flag indicates if multicast (including broadcast) packets are to be forwarded (1) or discarded (0) |
| INT ftSecureMode | 1.3.6.1.4.1.207.2.1.7 | INTEGER | read-write | Flag indicates if bridge will learn addresses |
| ftEntry | 1.3.6.1.4.1.207.2.2 | not-accessible | Bridge FT entries each selected by destination address | |
| INT ftAge | 1.3.6.1.4.1.207.2.2.1 | INTEGER | read-only | FT entry age since last referenced in seconds |
| INT ftDisp | 1.3.6.1.4.1.207.2.2.2 | INTEGER | read-write | FT entry disposition. Can be more than one OR'ed together |
| OCT ftAddr | 1.3.6.1.4.1.207.2.2.91 | OCTET STRING | not-accessible | destination address (dummy index) |
| interfaceErrors | 1.3.6.1.4.1.207.3 | not-accessible | Set of Ethernet link level errors | |
| CTR ifeInBusErr | 1.3.6.1.4.1.207.3.1 | Counter | read-only | Number of EtherStar read bus errors that have occurred |
| CTR ifeInShortPkt | 1.3.6.1.4.1.207.3.2 | Counter | read-only | Number of short packets received |
| CTR ifeInAlgError | 1.3.6.1.4.1.207.3.3 | Counter | read-only | Number of packets received with alignment errors |
| CTR ifeInBadSize | 1.3.6.1.4.1.207.3.4 | Counter | read-only | Number of packets received greater than 1518 bytes |
| CTR ifeInOverflow | 1.3.6.1.4.1.207.3.5 | Counter | read-only | Number of times receive buffer overflowed |
| CTR ifeInCRCErr | 1.3.6.1.4.1.207.3.6 | Counter | read-only | Number of CRC errors detected |
| CTR ifeOutColl16 | 1.3.6.1.4.1.207.3.7 | Counter | read-only | Number of packets discarded due to excessive collisions |
| CTR ifeOutCol | 1.3.6.1.4.1.207.3.8 | Counter | read-only | Number of collisions detected |
| CTR ifeOutShortPkt | 1.3.6.1.4.1.207.3.9 | Counter | read-only | Number of short packets transmitted |
| CTR ifeOutUnderflow | 1.3.6.1.4.1.207.3.10 | Counter | read-only | Number of packets transmitted w/programmed length > buffered transmitted data |
| CTR ifeOutBusErr | 1.3.6.1.4.1.207.3.11 | Counter | read-only | Number of EtherStar write bus errors |
| INT ifePort | 1.3.6.1.4.1.207.3.91 | INTEGER | not-accessible | |
| forwardCounters | 1.3.6.1.4.1.207.4 | read-only | Counters associated with bridge entity | |
| CTR fcInOctets | 1.3.6.1.4.1.207.4.1 | Counter | read-only | Number bytes received by bridge entity on specified port |
| CTR fcInPkts | 1.3.6.1.4.1.207.4.2 | Counter | read-only | Number packets received by bridge entity on specified port |
| CTR fcInNUcastPkts | 1.3.6.1.4.1.207.4.3 | Counter | read-only | Number multicast/broadcast packets received by bridge enity on specified port |
| CTR fcForwOctets | 1.3.6.1.4.1.207.4.4 | Counter | read-only | Number bytes forwarded by bridge entity onto specified port |
| CTR fcForwPkts | 1.3.6.1.4.1.207.4.5 | Counter | read-only | Number of packets forwarded by bridge enity onto specified port |
| CTR fcFiltOctets | 1.3.6.1.4.1.207.4.6 | Counter | read-only | Number of bytes received on specified port that were discarded by bridge enity |
| CTR fcFiltPkts | 1.3.6.1.4.1.207.4.7 | Counter | read-only | Number of packets dicarded by filtering by bridge enity |
| INT fcPort | 1.3.6.1.4.1.207.4.91 | INTEGER | not-accessible | |
| systemCounters | 1.3.6.1.4.1.207.5 | read-only | System operating s/w counters | |
| CTR sysMemFree | 1.3.6.1.4.1.207.5.1 | Counter | read-only | Number of buffers of a particular size on the memory free list |
| CTR sysMemAllocFail | 1.3.6.1.4.1.207.5.2 | Counter | read-only | Number of allocation failures for a particular buffer size |
| CTR sysMemTotAllocFail | 1.3.6.1.4.1.207.5.3 | Counter | read-only | Total number of memory allocation failures |
| CTR sysMemAllocTooBig | 1.3.6.1.4.1.207.5.4 | Counter | read-only | Number of memory allocation requests that failed |
| CTR sysMemFreeFail | 1.3.6.1.4.1.207.5.5 | Counter | read-only | Number of memory free requests that failed |
| CTR sysTimeToReset | 1.3.6.1.4.1.207.5.6 | Counter | read-write | Number of seconds unit bridge reset |
| OCT sysPanicMesg | 1.3.6.1.4.1.207.5.7 | OCTET STRING | read-only | Error message associated with last s/w generated reset |
| CTR sysResetCount | 1.3.6.1.4.1.207.5.8 | Counter | read-only | Number of times bridge has been reset other than power on/off |
| spanningTree | 1.3.6.1.4.1.207.6 | |||
| stBridge | 1.3.6.1.4.1.207.6.1 | not-accessible | Bridge specific parameters related to operation of Spanning Tree Protocol | |
| STR stBrName | 1.3.6.1.4.1.207.6.1.1 | DisplayString | read-write | Comment string denoting the bridge |
| OCT stBrIdent | 1.3.6.1.4.1.207.6.1.2 | OCTET STRING | read-only | 802.1 Bridge ID |
| INT stBrMaxAge | 1.3.6.1.4.1.207.6.1.3 | INTEGER | read-write | 802.1 Max BPDU Age (sec) for bridge |
| INT stBrHelloTime | 1.3.6.1.4.1.207.6.1.4 | INTEGER | read-write | 802.1 Hello Time (sec) for bridge |
| INT stBrForwDelay | 1.3.6.1.4.1.207.6.1.5 | INTEGER | read-write | 802.1 Forward Delay Time (sec) for bridge |
| INT stBrIsRoot | 1.3.6.1.4.1.207.6.1.6 | INTEGER | read-only | Bridge is root (1=yes 0=no) |
| INT stBrIsDesig | 1.3.6.1.4.1.207.6.1.7 | INTEGER | read-only | Flag indicating status of bridge as designated bridge (1=yes 0=no) |
| OCT stBrSpanAddr | 1.3.6.1.4.1.207.6.1.8 | OCTET STRING | read-only | MAC address used as Spanning Tree Protocol multicast address |
| INT stBrPriority | 1.3.6.1.4.1.207.6.1.9 | INTEGER | read-write | 802.1 bridge priority |
| INT stBrSTPDisabled | 1.3.6.1.4.1.207.6.1.10 | INTEGER | read-write | Variable to enable/disable operation of Spanning Tree (1=STP on 0=STP off) |
| stRoot | 1.3.6.1.4.1.207.6.2 | not-accessible | Parameters related to operation of Spanning Tree Protocol for Root bridge | |
| OCT stRtIdent | 1.3.6.1.4.1.207.6.2.1 | OCTET STRING | read-only | 802.1 Bridge ID of current Root bridge |
| INT stRtCost | 1.3.6.1.4.1.207.6.2.2 | INTEGER | read-only | 802.1 Root Path Cost of current Root bridge |
| INT stRtPort | 1.3.6.1.4.1.207.6.2.3 | INTEGER | read-only | Port number of port that provides path to current Root bridge |
| INT stRtMaxAge | 1.3.6.1.4.1.207.6.2.4 | INTEGER | read-only | 802.1 Max BPDU Age specified by current known Root bridge |
| INT stRtHelloTime | 1.3.6.1.4.1.207.6.2.5 | INTEGER | read-only | 802.1 Hello Time specified by current Root bridge |
| INT stRtForwDelay | 1.3.6.1.4.1.207.6.2.6 | INTEGER | read-only | 802.1 Forward Delay specified by current Root bridge |
| stPort | 1.3.6.1.4.1.207.6.3 | not-accessible | Port specific parameters related to operation of Spanning Tree Protocol | |
| INT stPrtState | 1.3.6.1.4.1.207.6.3.1 | INTEGER | read-write | 802.1 Port State disable and blocked states |
| INT stPrtCost | 1.3.6.1.4.1.207.6.3.2 | INTEGER | read-write | 802.1 Port Path Cost |
| INT stPrtIsDesig | 1.3.6.1.4.1.207.6.3.3 | INTEGER | read-only | Status of port as designated port for LAN |
| INT stPrtIsRoot | 1.3.6.1.4.1.207.6.3.4 | INTEGER | read-only | Status of port as Root Port |
| OCT stPrtDesigRoot | 1.3.6.1.4.1.207.6.3.5 | OCTET STRING | read-only | Bridge ID of Root brigde |
| INT stPrtDesigCost | 1.3.6.1.4.1.207.6.3.6 | INTEGER | read-only | Path Cost to Root bridge as advertised by the designated bridge |
| INT stPrtDesigBridge | 1.3.6.1.4.1.207.6.3.7 | INTEGER | read-only | Bridge ID of designated bridge |
| INT stPrtDesigPort | 1.3.6.1.4.1.207.6.3.8 | INTEGER | read-only | Port ID of designated port |
| INT stPrtPriority | 1.3.6.1.4.1.207.6.3.9 | INTEGER | read-write | 802.1 Port Priority |
| INT stPrtPort | 1.3.6.1.4.1.207.6.3.91 | INTEGER | not-accessible | |
| spanTreeStats | 1.3.6.1.4.1.207.6.4 | read-only | Spanning Tree stats on counters | |
| CTR stsTopoChanges | 1.3.6.1.4.1.207.6.4.1 | Counter | read-only | Number of topology changes that have occured since power-on |
| CTR stsConfigTimeout | 1.3.6.1.4.1.207.6.4.2 | Counter | read-only | Number of timeouts due to config BPDU not received |
| CTR stsPortDisable | 1.3.6.1.4.1.207.6.4.3 | Counter | read-only | Number of times port has been disabled since power-on |
| CTR stsPortEnable | 1.3.6.1.4.1.207.6.4.4 | Counter | read-only | Number of times port has been enabled since power-on |
| CTR stsInBadLen | 1.3.6.1.4.1.207.6.4.5 | Counter | read-only | Number of STP frames received with bad lenth by this port |
| CTR stsInUnknown | 1.3.6.1.4.1.207.6.4.6 | Counter | read-only | Packets received with bad 802.3 LSAP number by this port |
| CTR stsIn8021Man | 1.3.6.1.4.1.207.6.4.7 | Counter | read-only | Packets received with 802.1 Management LSAP (discarded) |
| CTR stsInConfig | 1.3.6.1.4.1.207.6.4.8 | Counter | read-only | Number of config BPDUs received by this port |
| CTR stsOutConfig | 1.3.6.1.4.1.207.6.4.9 | Counter | read-only | Number of config BPDUs transmitted by this port |
| CTR stsOutTopoChg | 1.3.6.1.4.1.207.6.4.10 | Counter | read-only | Number of Topology Change Notification BPDU transmitted by this port |
| INT stsPort | 1.3.6.1.4.1.207.6.4.91 | INTEGER | not-accessible | |
| filterRange | 1.3.6.1.4.1.207.7 | |||
| INT frNumRange | 1.3.6.1.4.1.207.7.1 | INTEGER | read-write | The maximum number of filter range table entries when read (GET). Set to zero to delete all filter range table entries. A set with any other value is ignored. |
| frEntry | 1.3.6.1.4.1.207.7.2 | read-write | ||
| INT frIndex | 1.3.6.1.4.1.207.7.2.1 | INTEGER | not-accessible | |
| mibObject | 1.3.6.1.4.1.207.8 | |||
| hubMib | 1.3.6.1.4.1.207.8.1 | |||
| rptrInfo | 1.3.6.1.4.1.207.8.1.1 | |||
| IP actualIPAddr | 1.3.6.1.4.1.207.8.1.1.1 | IpAddress | read-only | The actual IP Address that is currently being used by the hub. This could be the same value as hubIPAddr, or it may be different if another IP Address was received via Bootp. |
| IP hubIPAddr | 1.3.6.1.4.1.207.8.1.1.2 | IpAddress | read-write | The configured IP Address of the hub. |
| IP subnetMask | 1.3.6.1.4.1.207.8.1.1.3 | IpAddress | read-write | Subnet mask of the hub. |
| IP routerAddr | 1.3.6.1.4.1.207.8.1.1.4 | IpAddress | read-write | Gateway/router address of the hub. |
| IP snmpManager | 1.3.6.1.4.1.207.8.1.1.5 | IpAddress | read-write | IP Address of the hub's SNMP manager to which Traps will be sent. |
| STR softwareProduct | 1.3.6.1.4.1.207.8.1.1.6 | DisplayString | read-only | The ATI software product model number running in the hub. |
| STR softwareLevel | 1.3.6.1.4.1.207.8.1.1.7 | DisplayString | read-only | The software release level running in the hub. |
| INT configurationChanged | 1.3.6.1.4.1.207.8.1.1.8 | INTEGER | read-only | A flag, set to the value changed(1) when any of the hub's status or configuration has been changed. When this object is read, then the value is reset to nochange(2). |
| rptrNmMgrTable | 1.3.6.1.4.1.207.8.1.1.9 | not-accessible | A list of SNMP Trap Manager stations Entries. The number of entries is given by the rptrNmMgrTotal mib object. | |
| rptrNmMgrEntry | 1.3.6.1.4.1.207.8.1.1.9.1 | not-accessible | An Trap receipt Manager Entry containing ipaddress of the configured NMS's to which Traps are sent. | |
| INT rptrNmMgrIndex | 1.3.6.1.4.1.207.8.1.1.9.1.1 | INTEGER | read-only | The Index of SNMP Managers IP Address. |
| IP rptrNmMgrIpAddr | 1.3.6.1.4.1.207.8.1.1.9.1.2 | IpAddress | read-write | The IP Address of the NMS host configured. |
| deviceTable | 1.3.6.1.4.1.207.8.1.1.10 | not-accessible | The table contains the mapping of all devices in the chassis. For all hubs and switches, the object 'deviceQuadrant' returns 'right' (1). For docking devices, then it will reflect the position of the device in the docking station. This object is specific to Turbo Stack. | |
| deviceEntry | 1.3.6.1.4.1.207.8.1.1.10.1 | not-accessible | The device entry in the DeviceTable. | |
| INT deviceIndex | 1.3.6.1.4.1.207.8.1.1.10.1.1 | INTEGER | read-only | The Slot number in the chassis where the device is installed. |
| INT deviceQuadrant | 1.3.6.1.4.1.207.8.1.1.10.1.2 | INTEGER | read-only | The Quadrant of the device. |
| STR deviceDescr | 1.3.6.1.4.1.207.8.1.1.10.1.3 | DisplayString | read-only | TurboStack product family only. A textual description of the device. For devices that are repeaters, this value is identical to the rptrGroupDescr object. |
| OID deviceObjectID | 1.3.6.1.4.1.207.8.1.1.10.1.4 | OBJECT IDENTIFIER | read-only | TurboStack product family only. The sysObject identification of the device. For devices that are repeaters, this value is identical to the rptrGroupObjectID object. |
| IP deviceIpAddr | 1.3.6.1.4.1.207.8.1.1.10.1.5 | IpAddress | read-only | TurboStack product family only. The IP address (if present) of the device. For hubs devices, this object will return the same value as hubIPAddr. |
| INT devicePortCapacity | 1.3.6.1.4.1.207.8.1.1.10.1.6 | INTEGER | read-only | TurboStack product family only. The number of ports contained within the device. Valid range is 1-1024. Within each device, the ports are uniquely numbered in the range from 1 to devicePortCapacity. For devices that are repeaters, this value is identical to the rptrGroupPortCapacity object. |
| INT localOmegaState | 1.3.6.1.4.1.207.8.1.1.11 | INTEGER | read-write | This object enables the Local Omega to be enabled or disabled. |
| INT remoteOmegaState | 1.3.6.1.4.1.207.8.1.1.12 | INTEGER | read-write | This object enables the Remote Omega to be enabled or disabled. |
| groupInfo | 1.3.6.1.4.1.207.8.1.2 | |||
| OCT ledInfo | 1.3.6.1.4.1.207.8.1.2.1 | OCTET STRING | read-only | See groupLEDInfo |
| groupInfoTable | 1.3.6.1.4.1.207.8.1.2.2 | not-accessible | Table of group specific information. | |
| groupInfoEntry | 1.3.6.1.4.1.207.8.1.2.2.1 | not-accessible | An entry in the table, containing information about a single group of ports. | |
| INT groupInfoIndex | 1.3.6.1.4.1.207.8.1.2.2.1.1 | INTEGER | read-only | This object identifies the group within the repeater for which this entry contains information. |
| OCT groupLEDInfo | 1.3.6.1.4.1.207.8.1.2.2.1.2 | OCTET STRING | read-only | This information encodes the current state of the module per-port LEDs. |
| INT groupSegmentation | 1.3.6.1.4.1.207.8.1.2.2.1.3 | INTEGER | read-write | AT-3100 product family only. This object controls the segmentation option for this group. It may be segmented, connected, or using the module's external segmentation switch. |
| INT groupSecurity | 1.3.6.1.4.1.207.8.1.2.2.1.4 | INTEGER | read-write | AT-3100 product family only. This object controls the Security option for this group. It may be enabled, disabled, or using module's external security switch. |
| INT groupIntruderProtection | 1.3.6.1.4.1.207.8.1.2.2.1.5 | INTEGER | read-write | AT-3100 and TurboStack product families only. This object controls the Intruder Protection option for this group/module. For TurboStack products, disabled turns off Intruder Protection and places the module into source address Learning Mode. Enabled turns on Intruder Protection and places the module into Secure Mode. |
| INT groupSrcAddrLearningMode | 1.3.6.1.4.1.207.8.1.2.2.1.6 | INTEGER | read-write | AT-3100 product family only. This object indicates the Source Address Learning Mode. Mode1 : Automatic; passive devices: Automatic MAC address learning. Re-learn port MAC address after a port is disabled/re-enabled. Passive devices connected to a port will see all backbone traffic. Mode2 : Automatic; passive devices: Automatic MAC address learning. Re-learn port MAC address after link test fails (cable removed). Passive devices connected to a port will see all backbone traffic. Mode3 : Manual: No automatic MAC address learning (disabled). Mode4 : Automatic; active devices: Automatic MAC address learning. Re-learn port MAC address after a port is disabled/re-enabled. Passive devices connected to a port will see no backbone traffic. |
| INT groupIntruderTrap | 1.3.6.1.4.1.207.8.1.2.2.1.7 | INTEGER | read-write | AT-3100 and TurboStack product families only. This object controls the action to be taken by this group/module when an Intruder Alert event occurs. When this option is enabled, the detection of an intruder (a received packet with an unlearned or undefined source address) causes a Trap to be sent to the configured host manager. When this option is disabled then no Trap is sent on an Intruder Alert event. |
| INT groupIntruderDisable | 1.3.6.1.4.1.207.8.1.2.2.1.8 | INTEGER | read-write | AT-3100 and TurboStack product families only. This object controls the action to be taken by this group/module when an Intruder Alert event occurs. When this option is enabled, the detection of an intruder (a received packet with an unlearned or undefined source address) causes the port where the intruder was detected to be automatically disabled. When this option is disabled then the port will not be disabled on an Intruder Alert event. |
| INT groupOperStatus | 1.3.6.1.4.1.207.8.1.2.2.1.9 | INTEGER | read-only | TurboStack product family only. An object that indicates the operational status of the module. For modules that are repeaters, this value is identical to the rptrGroupOperStatus object. A status of operational(2) indicates that the module is present and functional within the chassis. A status of malfunctioning(3) indicates that the module is present within the chassis but is not functional. A status of notPresent(4) indicates that the module is temporarily or permanently physically and/or logically not a part of the chassis. |
| STR groupDescr | 1.3.6.1.4.1.207.8.1.2.2.1.10 | DisplayString | read-only | TurboStack product family only. A textual description of the module. For modules that are repeaters, this value is identical to the rptrGroupDescr object. |
| OID groupObjectID | 1.3.6.1.4.1.207.8.1.2.2.1.11 | OBJECT IDENTIFIER | read-only | TurboStack product family only. The sysObject identification of the module. For modules that are repeaters, this value is identical to the rptrGroupObjectID object. |
| IP groupIPAddress | 1.3.6.1.4.1.207.8.1.2.2.1.12 | IpAddress | read-only | TurboStack product family only. The IP address (if any) of the module. For modules that are repeaters, this value is identical to the actualIPAddr object. For non-repeater modules, this object identifies the IP address that may be used to communicate directly with the module. |
| INT groupPortCapacity | 1.3.6.1.4.1.207.8.1.2.2.1.13 | INTEGER | read-only | TurboStack product family only. The number of ports contained within the module. Valid range range is 1-1024. Within each module, the ports are uniquely numbered in the range from 1 to groupPortCapacity. For modules that are repeaters, this value is identical to the rptrGroupPortCapacity object. |
| INT groupEraseSourceAddressTable | 1.3.6.1.4.1.207.8.1.2.2.1.14 | INTEGER | read-write | TurboStack product family only. This object, when Set to the erase value, will clear (empty) the module Source Address Table, deleting all learned MAC addresses; this object will then automatically revert back to the noerase state. When Set to noerase, no action is taken and the Source Address Table remains unmodified. A Get of this object will always return the noerase value. |
| OCT groupAddSourceAddress | 1.3.6.1.4.1.207.8.1.2.2.1.15 | OCTET STRING | read-write | TurboStack product family only. This object, when Set with a 48-bit MAC address value, will add the new MAC address to the module Source Address Table. A Get of this object will return a string of length zero. |
| OCT groupDeleteSourceAddress | 1.3.6.1.4.1.207.8.1.2.2.1.16 | OCTET STRING | read-write | TurboStack product family only. This object, when Set with a 48-bit MAC address value, will delete the MAC address from the module Source Address Table. A Get of this object will return a string of length zero. |
| INT groupLimitAddressPerPort | 1.3.6.1.4.1.207.8.1.2.2.1.17 | INTEGER | read-write | TurboStack product family only. This object configures the module to allow no limitation on number of source addresses on its ports, or limit to only 1 source address per port. |
| INT groupCheckPrimaryTimer | 1.3.6.1.4.1.207.8.1.2.2.1.18 | INTEGER | read-write | TurboStack product family only. The Check Primary Timer is the timer value in seconds which determines how long to wait before checking if the primary port could receive again. This timer applies when the secondary port is enabled, and the primary port's failure is NOT due to loss of link. Range: 1 - 65535 in seconds, 0 means don't check receives. Default is 60 seconds. |
| INT groupReceiveFailureTimer | 1.3.6.1.4.1.207.8.1.2.2.1.19 | INTEGER | read-write | TurboStack product family only. The Receive Failure Timer is the timer value in seconds which determines how long to wait before the secondary port takes over when the primary port is not receiving data. This timer applies only when the primary port's failure is NOT due to loss of link. Range: 0 - 65535 in seconds, 0 means don't check receives. Default is 60 seconds. |
| INT groupCheckResampleTimer | 1.3.6.1.4.1.207.8.1.2.2.1.20 | INTEGER | read-write | TurboStack product family only. The Resample Timer is the timer value in milliseconds which determines how long to sample/test if the primary port could receive data or is no longer partitioned. This timer begins once groupCheckPrimaryTimer has expired, and during this sampling time, the secondary port cannot repeat data. Range: 100 - 65535 milliseconds. Default is 200 milliseconds. |
| portInfo | 1.3.6.1.4.1.207.8.1.3 | |||
| atiPortTable | 1.3.6.1.4.1.207.8.1.3.1 | not-accessible | Table of descriptive and status information about the ports. | |
| atiPortEntry | 1.3.6.1.4.1.207.8.1.3.1.1 | not-accessible | An entry in the table, containing information about a single port. | |
| INT atiPortGroupIndex | 1.3.6.1.4.1.207.8.1.3.1.1.1 | INTEGER | read-only | This object identifies the group containing the port for which this entry contains information. |
| INT atiPortIndex | 1.3.6.1.4.1.207.8.1.3.1.1.2 | INTEGER | read-only | This object identifies the port within the group for which this entry contains information. This value can never be greater than rptrGroupPortCapacity for the associated group. |
| STR portName | 1.3.6.1.4.1.207.8.1.3.1.1.3 | DisplayString | read-write | Port Name |
| INT portState | 1.3.6.1.4.1.207.8.1.3.1.1.4 | INTEGER | read-write | Port State option: enabled allow repeating of packets through the port; disabled turns off the port and prevents packets repeating through the port. |
| INT linkTest | 1.3.6.1.4.1.207.8.1.3.1.1.5 | INTEGER | read-write | Link Test option: enabled turns on checking for link test signals for the port; disabled turns off checking for link test signals. |
| INT altReconnection | 1.3.6.1.4.1.207.8.1.3.1.1.6 | INTEGER | read-write | Reconnection Method: 1=IEEE Standard, 2=Alternate. |
| INT polarityCorrection | 1.3.6.1.4.1.207.8.1.3.1.1.7 | INTEGER | read-write | Polarity Correction option: enabled turns on automatic polarity correction for the port; disabled turns off automatic polarity correction. |
| INT partitionedLED | 1.3.6.1.4.1.207.8.1.3.1.1.8 | INTEGER | read-only | This object reflects the current actual partitioning state of the port. The notpartitioned value means that the port is operational and repeating through the port is enabled. The partitioned value means that the port is not operational and repeating through the port is disabled. |
| INT linkTestLED | 1.3.6.1.4.1.207.8.1.3.1.1.9 | INTEGER | read-only | This object reflects the current actual link test state of the port. The nolinktesterror value means that valid link integrity test signals have been detected on the port, indicating that an operable device is cabled to the port. The linktesterror value means that no link integrity test signals have been detected, indicating removal or failure of the port-to-device cable, or that the device is not operational. This object applies only to UTP (twisted pair) and fiber optic ports (not AUI or BNC ports). |
| INT polarityLED | 1.3.6.1.4.1.207.8.1.3.1.1.10 | INTEGER | read-only | This object reflects the current actual polarity state of the port. The notreversed value means that the port-to-device cable connection is properly polarized. The reversed value means that the cable connection has reversed polarity. This object applies only to UTP (twisted pair) and fiber optic ports (not AUI or BNC ports). |
| MAC portMACAddress | 1.3.6.1.4.1.207.8.1.3.1.1.11 | MacAddress | read-write | AT-3100 product family only. This object is either the MAC address of the last readable frame (i.e., counted by rptrMonitorPortReadableFrames) received by this port, or a manually input MAC address. If neither of those exists, then a string of length zero is returned. If a 'read' operation is performed on this object, the value it returns is the same as the value returned by object 'rptrAddrTrackNewLastSrcAddress' in the Standard Repeater MIB (RFC1516). |
| CTR portFrames_64_127bytes | 1.3.6.1.4.1.207.8.1.3.1.1.12 | Counter | read-only | TurboStack product family only. The number of readable frames received on this port where the frame length was in the range 64 through 127 octets. |
| CTR portFrames_128_255bytes | 1.3.6.1.4.1.207.8.1.3.1.1.13 | Counter | read-only | TurboStack product family only. The number of readable frames received on this port where the frame length was in the range 128 through 255 octets. |
| CTR portFrames_256_511bytes | 1.3.6.1.4.1.207.8.1.3.1.1.14 | Counter | read-only | TurboStack product family only. The number of readable frames received on this port where the frame length was in the range 256 through 511 octets. |
| CTR portFrames_512_1023bytes | 1.3.6.1.4.1.207.8.1.3.1.1.15 | Counter | read-only | TurboStack product family only. The number of readable frames received on this port where the frame length was in the range 512 through 1023 octets. |
| CTR portFrames_1024_1518bytes | 1.3.6.1.4.1.207.8.1.3.1.1.16 | Counter | read-only | TurboStack product family only. The number of readable frames received on this port where the frame length was in the range 1024 through 1518 octets. |
| INT portRedundantPort | 1.3.6.1.4.1.207.8.1.3.1.1.17 | INTEGER | read-write | TurboStack product family only. This is the redundant port for atiPortIndex. If the port is a secondary port as indicated in portRedundantPosition, then it serves as a backup port. This would indicate paired ports with redundant link. |
| INT portRedundantPosition | 1.3.6.1.4.1.207.8.1.3.1.1.18 | INTEGER | read-only | TurboStack product family only. This object will retrieve the redundant position of the port, primary or secondary port, if the port has a redundant link to it. |
| INT portLearningState | 1.3.6.1.4.1.207.8.1.3.1.1.19 | INTEGER | read-write | TurboStack product family only. This object enable the learning on a port to be shut ON or OFF. Once the learning is Shut Off, the learning of MAC Address will stop. |
| rptrStat | 1.3.6.1.4.1.207.8.1.4 | |||
| CTR hubReadableFrames | 1.3.6.1.4.1.207.8.1.4.1 | Counter | read-only | The sum total of the Readable Frames Counters of all ports on all modules/groups |
| CTR hubReadableOctets | 1.3.6.1.4.1.207.8.1.4.2 | Counter | read-only | The sum total of the Readable Octets (bytes) Counters of all ports on all modules/groups |
| CTR hubFCSError | 1.3.6.1.4.1.207.8.1.4.3 | Counter | read-only | The sum total of the FCS (CRC) Error Counters of all ports on all modules/groups |
| CTR hubAlignError | 1.3.6.1.4.1.207.8.1.4.4 | Counter | read-only | The sum total of the Alignment Error Counters of all ports on all modules/groups |
| CTR hubFrameTooLong | 1.3.6.1.4.1.207.8.1.4.5 | Counter | read-only | The sum total of the Frame Too Long Error Counters of all ports on all modules/groups |
| CTR hubShortEvent | 1.3.6.1.4.1.207.8.1.4.6 | Counter | read-only | The sum total of the Short Event Error Counters of all ports on all modules/groups |
| CTR hubRunt | 1.3.6.1.4.1.207.8.1.4.7 | Counter | read-only | The sum total of the Runt Error Counters of all ports on all modules/groups |
| CTR hubLateEvent | 1.3.6.1.4.1.207.8.1.4.8 | Counter | read-only | The sum total of the Late Event Error Counters of all ports on all modules/groups |
| CTR hubVeryLongEvent | 1.3.6.1.4.1.207.8.1.4.9 | Counter | read-only | The sum total of the Very Long Event Error (Jabber) Counters of all ports on all modules/groups |
| CTR hubDataRateMism | 1.3.6.1.4.1.207.8.1.4.10 | Counter | read-only | The sum total of the Data Rate Mismatch Error Counters of all ports on all modules/groups |
| CTR hubAutoPartition | 1.3.6.1.4.1.207.8.1.4.11 | Counter | read-only | The sum total of the Auto Port Partition Counters of all ports on all modules/groups |
| CTR hubTotalError | 1.3.6.1.4.1.207.8.1.4.12 | Counter | read-only | The sum total of all Error Counters of all ports on all modules/groups |
| CTR hubPortCollision | 1.3.6.1.4.1.207.8.1.4.13 | Counter | read-only | The sum total of the Port Collision Counters of all ports on all modules/groups |
| CTR hubFrames_64_127bytes | 1.3.6.1.4.1.207.8.1.4.14 | Counter | read-only | TurboStack product family only. The sum total number of readable frames received on all ports on all modules/groups, where the frame length was in the range 64 through 127 octets. |
| CTR hubFrames_128_255bytes | 1.3.6.1.4.1.207.8.1.4.15 | Counter | read-only | TurboStack product family only. The sum total number of readable frames received on all ports on all modules/groups, where the frame length was in the range 128 through 255 octets. |
| CTR hubFrames_256_511bytes | 1.3.6.1.4.1.207.8.1.4.16 | Counter | read-only | TurboStack product family only. The sum total number of readable frames received on all ports on all modules/groups, where the frame length was in the range 256 through 511 octets. |
| CTR hubFrames_512_1023bytes | 1.3.6.1.4.1.207.8.1.4.17 | Counter | read-only | TurboStack product family only. The sum total number of readable frames received on all ports on all modules/groups, where the frame length was in the range 512 through 1023 octets. |
| CTR hubFrames_1024_1518bytes | 1.3.6.1.4.1.207.8.1.4.18 | Counter | read-only | TurboStack product family only. The sum total number of readable frames received on all ports on all modules/groups, where the frame length was in the range 1024 through 1518 octets. |
| groupStat | 1.3.6.1.4.1.207.8.1.5 | |||
| groupStatTable | 1.3.6.1.4.1.207.8.1.5.1 | not-accessible | Table of performance and error statistics for the groups. | |
| groupStatEntry | 1.3.6.1.4.1.207.8.1.5.1.1 | not-accessible | An entry in the table, containing total performance and error statistics for a single group. Regular retrieval of the information in this table provides a means of tracking the performance and health of the networked devices attached to this group's ports. The counters in this table are redundant in the sense that they are the summations of information already available through other objects. However, these sums provide a considerable optimization of network management traffic over the otherwise necessary retrieval of the individual counters included in each sum. | |
| INT groupStatIndex | 1.3.6.1.4.1.207.8.1.5.1.1.1 | INTEGER | read-only | This object identifies the group within the repeater for which this entry contains information. |
| CTR groupFCSError | 1.3.6.1.4.1.207.8.1.5.1.1.2 | Counter | read-only | The sum total of the FCS (CRC) Error Counters of all ports on this module/group |
| CTR groupAlignError | 1.3.6.1.4.1.207.8.1.5.1.1.3 | Counter | read-only | The sum total of the Alignment Error Counters of all ports on this module/group |
| CTR groupFrameTooLong | 1.3.6.1.4.1.207.8.1.5.1.1.4 | Counter | read-only | The sum total of the Frame Too Long Error Counters of all ports on this module/group |
| CTR groupShortEvent | 1.3.6.1.4.1.207.8.1.5.1.1.5 | Counter | read-only | The sum total of the Short Event Error Counters of all ports on this module/group |
| CTR groupRunt | 1.3.6.1.4.1.207.8.1.5.1.1.6 | Counter | read-only | The sum total of the Runt Error Counters of all ports on this module/group |
| CTR groupPortCollision | 1.3.6.1.4.1.207.8.1.5.1.1.7 | Counter | read-only | The sum total of the Port Collision Counters of all ports on this module/group |
| CTR groupLateEvent | 1.3.6.1.4.1.207.8.1.5.1.1.8 | Counter | read-only | The sum total of the Late Event Error Counters of all ports on this module/group |
| CTR groupVeryLongEvent | 1.3.6.1.4.1.207.8.1.5.1.1.9 | Counter | read-only | The sum total of the Very Long Event Error (Jabber) Counters of all ports on this module/group |
| CTR groupDataRateMism | 1.3.6.1.4.1.207.8.1.5.1.1.10 | Counter | read-only | The sum total of the Data Rate Mismatch Error Counters of all ports on this module/group |
| CTR groupAutoPartition | 1.3.6.1.4.1.207.8.1.5.1.1.11 | Counter | read-only | The sum total of the Auto Port Partition Counters of all ports on this module/group |
| CTR groupFrames_64_127bytes | 1.3.6.1.4.1.207.8.1.5.1.1.12 | Counter | read-only | TurboStack product family only. The sum total number of readable frames received on all ports on this module/group, where the frame length was in the range 64 through 127 octets. |
| CTR groupFrames_128_255bytes | 1.3.6.1.4.1.207.8.1.5.1.1.13 | Counter | read-only | TurboStack product family only. The sum total number of readable frames received on all ports on this module/group, where the frame length was in the range 128 through 255 octets. |
| CTR groupFrames_256_511bytes | 1.3.6.1.4.1.207.8.1.5.1.1.14 | Counter | read-only | TurboStack product family only. The sum total number of readable frames received on all ports on this module/group, where the frame length was in the range 256 through 511 octets. |
| CTR groupFrames_512_1023bytes | 1.3.6.1.4.1.207.8.1.5.1.1.15 | Counter | read-only | TurboStack product family only. The sum total number of readable frames received on all ports on this module/group, where the frame length was in the range 512 through 1023 octets. |
| CTR groupFrames_1024_1518bytes | 1.3.6.1.4.1.207.8.1.5.1.1.16 | Counter | read-only | TurboStack product family only. The sum total number of readable frames received on all ports on this module/group, where the frame length was in the range 1024 through 1518 octets. |
| groupSAT | 1.3.6.1.4.1.207.8.1.6 | |||
| groupSourceAddressTable | 1.3.6.1.4.1.207.8.1.6.1 | not-accessible | TurboStack product family only. Table of learned and/or configured source MAC addresses which defines the only valid and allowable source addresses for this module (if Intruder Protection is enabled). | |
| groupSATEntry | 1.3.6.1.4.1.207.8.1.6.1.1 | not-accessible | TurboStack product family only. An entry in the Source Address Table, containing information about a single source MAC address. | |
| INT groupSATModule | 1.3.6.1.4.1.207.8.1.6.1.1.1 | INTEGER | read-only | TurboStack product family only. This object identifies the group within the repeater for which this entry contains information. |
| INT groupSATIndex | 1.3.6.1.4.1.207.8.1.6.1.1.2 | INTEGER | read-only | TurboStack product family only. This object identifies the index within the Source Address Table for which this entry contains information. |
| OCT groupSATMacAddress | 1.3.6.1.4.1.207.8.1.6.1.1.3 | OCTET STRING | read-only | TurboStack product family only. This object is the learned or configured source MAC address. If no MAC address has been learned for this table entry (if this is beyond the logical end of the table) then a string of zero length will be returned. |
| INT groupSATPort | 1.3.6.1.4.1.207.8.1.6.1.1.4 | INTEGER | read-only | TurboStack product family only. This object is the port number where the source MAC address was last detected. If the MAC address has not been detected since the system was last started, then this object will be zero. |
| atiTrapAttrs | 1.3.6.1.4.1.207.9 | |||
| OCT atiTrapIntruderMacAddress | 1.3.6.1.4.1.207.9.1 | OCTET STRING | not-accessible | The Mac address of the Intruder which is different from the rfc1516 object rptrAddrTrackLastSourceAddress is seen on port which is the the next object |
| INT atiTrapIntruderModuleNumber | 1.3.6.1.4.1.207.9.2 | INTEGER | not-accessible | This is the module number on which an intruder was seen. |
| INT atiTrapIntruderPortNumber | 1.3.6.1.4.1.207.9.3 | INTEGER | not-accessible | This is the port number on which an intruder was seen. |
| INT atiPortChangeDirection | 1.3.6.1.4.1.207.9.4 | INTEGER | not-accessible | This is the direction of redundant port change. These two values are used in the trap atiRedundantPortChangeTrap. |
RFC description
Manages Allied Telesis switches including bridges, repeaters, and hub infrastructure.
Start monitoring Allied Telesis legacy hubs and switches (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.