| OID symbolic | OID numeric | Type | Access | Description |
|---|
| install | 1.3.6.1.4.1.207.8.4.4.4.49 | | | This MIB file contains definitions of managed objects for the
INSTALL module. |
| installTrap | 1.3.6.1.4.1.207.8.4.4.4.49.0 | | | |
| NTF configFileExistTrap | 1.3.6.1.4.1.207.8.4.4.4.49.0.1 | | | This trap is generated when the boot file is detected as
missing |
| installTable | 1.3.6.1.4.1.207.8.4.4.4.49.1 | | not-accessible | The list of install configurations for the router. |
| installEntry | 1.3.6.1.4.1.207.8.4.4.4.49.1.1 | | not-accessible | An entry in the list of install configurations. |
| INT instIndex | 1.3.6.1.4.1.207.8.4.4.4.49.1.1.1 | INTEGER | read-only | The index for the install table. There are four install
configurations defined in the router, default, preferred,
temporary and current. The router will attempt to use these
in the order temporary, preferred, default when it boots.
An install that is undefined will be skipped, an install
which points to a file which is not present will be skipped.
When the temporary install is used, the information is deleted.
The current configuration shows what the router currently
has installed. |
| INT instRelDevice | 1.3.6.1.4.1.207.8.4.4.4.49.1.1.2 | INTEGER | read-only | The device for the release in the install. If the device is
flash the file for the release is given in instRelName. Devices
none(1) or flash(3) are invalid for the default(3) release. |
| STR instRelName | 1.3.6.1.4.1.207.8.4.4.4.49.1.1.3 | DisplayString | read-only | The file name for the release in the install, if the
instRelDevice is flash(3). If the instRelDevice is none(1) or
eprom(2), this object should be a null string. |
| INT instRelMajor | 1.3.6.1.4.1.207.8.4.4.4.49.1.1.4 | INTEGER | read-only | The major release number for this install. This information is
obtained by the router when the other elements in the row are
set and is thus not directly set by management. If the release number
is a.b.c, the major release number is a. |
| INT instRelMinor | 1.3.6.1.4.1.207.8.4.4.4.49.1.1.5 | INTEGER | read-only | The minor release number for this install. This information is
obtained by the router when the other elements in the row are
set and is thus not directly set by management. If the release number
is a.b.c, the major release number is b. |
| INT instPatDevice | 1.3.6.1.4.1.207.8.4.4.4.49.1.1.6 | INTEGER | read-only | The device for the patch in the install. The file for the
patch is given in instPatName unless the device is none(1). |
| STR instPatName | 1.3.6.1.4.1.207.8.4.4.4.49.1.1.7 | DisplayString | read-only | The file name for the patch in the install. |
| INT instRelInterim | 1.3.6.1.4.1.207.8.4.4.4.49.1.1.8 | INTEGER | read-only | The interim release number for this install. This information is
obtained by the router when the other elements in the row are
set and is thus not directly set by management. If the release number
is a.b.c, the major release number is c. If the release number is a.b,
the interim release number is 0. |
| INT instRelExists | 1.3.6.1.4.1.207.8.4.4.4.49.1.1.9 | INTEGER | read-only | Indicates if the release file exists or not. true(1) means it exists, false(2) means it doesn't. |
| INT instPatExists | 1.3.6.1.4.1.207.8.4.4.4.49.1.1.10 | INTEGER | read-only | Indicates if the patch file exists or not. true(1) means it exists, false(2) means it doesn't |
| installHistoryTable | 1.3.6.1.4.1.207.8.4.4.4.49.2 | | not-accessible | The table of descriptions of events in the install history of
the router. |
| installHistoryEntry | 1.3.6.1.4.1.207.8.4.4.4.49.2.1 | | not-accessible | A single line describing part of the install history of the
router. |
| INT instHistIndex | 1.3.6.1.4.1.207.8.4.4.4.49.2.1.1 | INTEGER | read-only | The index of this event in the install history. Indices run
from 1 to the maximum number. The maximum number is not
available as a managed object so this table will have to be
traversed in order to find out how large it is. |
| STR instHistLine | 1.3.6.1.4.1.207.8.4.4.4.49.2.1.2 | DisplayString | read-only | A line of text describing a single event in the install
history of the router. |
| STR configFile | 1.3.6.1.4.1.207.8.4.4.4.49.3 | DisplayString | read-write | The name of the file that the router will configure from at
boot. The format of the name is the same as that for fileName
described above. If the configuration file name is a zero
length string, then there is no configuration file defined in
the router. |
| licenceTable | 1.3.6.1.4.1.207.8.4.4.4.49.4 | | not-accessible | The list of release licences in the router. |
| licenceEntry | 1.3.6.1.4.1.207.8.4.4.4.49.4.1 | | not-accessible | An entry in the list of release licences. |
| INT licenceIndex | 1.3.6.1.4.1.207.8.4.4.4.49.4.1.1 | INTEGER | read-only | A unique licence index. Licence indices are recalculated every
time the router reboots to reflect the current licences on the
router. As licences are added, new indices are allocated to the
new licences. |
| INT licenceStatus | 1.3.6.1.4.1.207.8.4.4.4.49.4.1.2 | INTEGER | read-write | The status of the file. When read, this object will always
return a value of ok(1), since the object will not exist if the
value is deleting(2). Write the value deleting(2) to this
object to delete the file. |
| STR licenceRelease | 1.3.6.1.4.1.207.8.4.4.4.49.4.1.3 | DisplayString | read-write | The file name for the release whose licence this is. |
| INT licenceMajor | 1.3.6.1.4.1.207.8.4.4.4.49.4.1.4 | INTEGER | read-write | The major release number for the release whose licence this is. |
| INT licenceMinor | 1.3.6.1.4.1.207.8.4.4.4.49.4.1.5 | INTEGER | read-write | The minor release number for the release whose licence this is. |
| STR licencePassword | 1.3.6.1.4.1.207.8.4.4.4.49.4.1.6 | DisplayStringUnsized | read-write | The password for this release. The password is a string of hex
digits. |
| STR licenceExpiry | 1.3.6.1.4.1.207.8.4.4.4.49.4.1.7 | DisplayString | read-only | A human-readable string that gives the expiry date of this
licence. |
| INT licenceInterim | 1.3.6.1.4.1.207.8.4.4.4.49.4.1.8 | INTEGER | read-write | The interim release number for the release whose licence this is. |
| STR createConfigFile | 1.3.6.1.4.1.207.8.4.4.4.49.5 | DisplayString | read-write | The name of a file to create containing the current router configuration. A
read from this variable will return the same as the variable configFile. Thus
to save the current configuration in the current configuration file, read
createConfigFile first, then write the result back to createConfigFile. If
this variable is written with the name of an existing file, the file will be
replaced with the current configuration. |
| INT configFileExistEx | 1.3.6.1.4.1.207.8.4.4.4.49.6 | INTEGER | read-only | Indicates if the boot configuration file exists or not. true(1)
means it exists, false(2) means it doesn't |
| STR currentConfigFile | 1.3.6.1.4.1.207.8.4.4.4.49.7 | DisplayString | read-only | The name of the file that the router is currently configured
with. The format of the name is the same as that for fileName
described above. If the current configuration file name is a zero
length string, then there is no current configuration file defined in
the router. |
