| OID symbolic | OID numeric | Type | Access | Description |
|---|
| _pysmi_async | 1.3.6.1.4.1.208.45 | | | |
| asyncConfig | 1.3.6.1.4.1.208.45.1 | | | |
| asyncConfigTable | 1.3.6.1.4.1.208.45.1.1 | | not-accessible | A list of configuration entries. Each entry contains
the configuration of a PCMCIA interface when this
is used with an asynchronous modem. |
| asyncConfigEntry | 1.3.6.1.4.1.208.45.1.1.1 | | not-accessible | Every configuration option available for the PC-Card
modem driver. |
| INT asyncConfigIndex | 1.3.6.1.4.1.208.45.1.1.1.1 | INTEGER | read-only | The ifIndex for the modem interface. |
| INT asyncConfigDialMode | 1.3.6.1.4.1.208.45.1.1.1.2 | INTEGER | read-write | The dialing mode. Note that the pulse mode may not
be compatible with all countries unless advanced
country information is setup with the init strings. |
| INT asyncConfigAutoInit | 1.3.6.1.4.1.208.45.1.1.1.3 | INTEGER | read-write | When auto-init is enabled the modem brand is detected
and a predefined init string suited to the modem is
used. When auto-init is disabled the user editable init
string is used. |
| OCT asyncConfigDialString | 1.3.6.1.4.1.208.45.1.1.1.4 | OCTET STRING | read-write | The phone number to dial, with special characters
to control the dialing, like pauses and waits for
new dial tones. The special characters may vary
amongst the modem brands. |
| OCT asyncConfigInitString1 | 1.3.6.1.4.1.208.45.1.1.1.5 | OCTET STRING | read-write | The first half of the user-editable init string. The
two init strings are combined before use. |
| OCT asyncConfigInitString2 | 1.3.6.1.4.1.208.45.1.1.1.6 | OCTET STRING | read-write | The second half of the user-editable init string. |
| asyncMon | 1.3.6.1.4.1.208.45.2 | | | |
| asyncMonTable | 1.3.6.1.4.1.208.45.2.1 | | not-accessible | A list of monitor entries. Each entry contains
the monitorable data of a PCMCIA interface when
this is used with an asynchronous modem. |
| asyncMonEntry | 1.3.6.1.4.1.208.45.2.1.1 | | not-accessible | Every value that can be monitored for the PCMCIA
interface. |
| INT asyncMonIndex | 1.3.6.1.4.1.208.45.2.1.1.1 | INTEGER | read-only | The ifIndex for the modem interface. |
| INT asyncMonMode | 1.3.6.1.4.1.208.45.2.1.1.2 | INTEGER | read-only | The current internal state of the modem driver. |
| CTR asyncMonTransmitFailedErrors | 1.3.6.1.4.1.208.45.2.1.1.3 | Counter | read-only | The number of aborted packet transmits due to a
disconnect while packets were queued for
transmission. |
| CTR asyncMonTransmitCongestions | 1.3.6.1.4.1.208.45.2.1.1.4 | Counter | read-only | The number of packet transmissions that failed due
to lack of resources. |
| CTR asyncMonReceiveLostEndMarkers | 1.3.6.1.4.1.208.45.2.1.1.5 | Counter | read-only | The number of packets discarded because the
packet end signature was missing. |
| CTR asyncMonReceiveOverflows | 1.3.6.1.4.1.208.45.2.1.1.6 | Counter | read-only | The number of packets discarded due to lack of
free receive buffers. |
| CTR asyncMonReceiveStuffingErrors | 1.3.6.1.4.1.208.45.2.1.1.7 | Counter | read-only | In data transmissions via an asynchrounous modem,
certain characters are reserved for use with the
modem, e.g. to indicate the start and end of data
packets. If these reserved characters occur in the
data stream, an 'Escape character' followed by a
'Substitute character' are used to represent it.
This is known as stuffing. This parameter shows
the number of packets discarded due to illegal
combinations of the Escape character with
Substitute characters. |
| CTR asyncMonReceiveCRCErrors | 1.3.6.1.4.1.208.45.2.1.1.8 | Counter | read-only | The number of packets discarded due to errors
in the packet detected using the packet checksum. |
| CTR asyncMonReceiveShortPackets | 1.3.6.1.4.1.208.45.2.1.1.9 | Counter | read-only | The number of packets discarded because the packets
were shorter than the minimum legal packet length. |
| CTR asyncMonReceiveLongPackets | 1.3.6.1.4.1.208.45.2.1.1.10 | Counter | read-only | The number of packets discarded because the packets
were larger than the maximum legal packet length. |
| CTR asyncMonReceiveUartOverrunErrors | 1.3.6.1.4.1.208.45.2.1.1.11 | Counter | read-only | The number of packets discarded because the
incoming data exceeded the receive buffer size
in the UART. |
| CTR asyncMonReceiveUartParityErrors | 1.3.6.1.4.1.208.45.2.1.1.12 | Counter | read-only | The number of packets discarded because of errors
in the packet detected using the parity bit. |
| CTR asyncMonReceiveUartFramingErrors | 1.3.6.1.4.1.208.45.2.1.1.13 | Counter | read-only | The number of packets discarded because of errors
during receiving the bit stream. |
| CTR asyncMonReceiveUartBreakErrors | 1.3.6.1.4.1.208.45.2.1.1.14 | Counter | read-only | The number of packets discarded because of a
temporary loss of the received data flow. |
| INT asyncMonCallDirection | 1.3.6.1.4.1.208.45.2.1.1.15 | INTEGER | read-only | Direction of the current call. |
| asyncPcmcia | 1.3.6.1.4.1.208.45.3 | | | |
| asyncPcmciaTable | 1.3.6.1.4.1.208.45.3.1 | | not-accessible | A list of PC-Card (PCMCIA) information entries.
Each entry contains the information available from
the modems PCMCIA-interface. |
| asyncPcmciaEntry | 1.3.6.1.4.1.208.45.3.1.1 | | not-accessible | |
| INT asyncPcmciaIndex | 1.3.6.1.4.1.208.45.3.1.1.1 | INTEGER | read-only | The ifIndex for the modem interface. |
| OCT asyncPcmciaManufacturerName | 1.3.6.1.4.1.208.45.3.1.1.2 | OCTET STRING | read-only | The company name of the modem manufacturer. |
| OCT asyncPcmciaProductName | 1.3.6.1.4.1.208.45.3.1.1.3 | OCTET STRING | read-only | The brand name of the modem. |
| INT asyncPcmciaProductVersionMajor | 1.3.6.1.4.1.208.45.3.1.1.4 | INTEGER | read-only | The modem hardware major version number. |
| INT asyncPcmciaProductVersionMinor | 1.3.6.1.4.1.208.45.3.1.1.5 | INTEGER | read-only | The modem hardware minor version number. |
| INT asyncPcmciaPcmciaSupported | 1.3.6.1.4.1.208.45.3.1.1.6 | INTEGER | read-only | This value is yes when the modem can be used with
the router. |
