HPN-ICF-ATM-DXI-MIB

All MIBs › HPN-ICF-ATM-DXI-MIB

Last Updated: 2005-04-14

Category: ATM, Domain: WAN, Network Interfaces, Protocol: ATM, Vendor: H3C/HH3C, Vendor: HP/HPE

Description: HP Networking ICF SNMP MIB for ATM DXI (Data Exchange Interface) WAN interface configuration and statistics on HP devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-ATM-DXI-MIB?

HPN-ICF-ATM-DXI-MIB is a vendor-specific MIB from HP Networking (ICF platform) that manages ATM DXI (Data Exchange Interface) configuration on HP router/switch WAN interfaces, covering the DTE-to-DSU/CSU interworking used to carry ATM cells over a serial DXI link. It exposes hpnicfAtmDxiConfMode (the ATM-DXI mode in use: mode1a, mode1b, or mode2) and two tables: hpnicfAtmDxiPvcTable, which defines PVCs by VPI/VCI with encapsulation type (SNAP, NLPID, or MUX) and row lifecycle status, and hpnicfAtmDxiMapTable, which maps peer IP addresses to specific PVCs with InARP timer and broadcast-forwarding settings. As a configuration-oriented MIB it is used less for traffic counters and more to confirm that PVC and address-mapping definitions match the intended WAN topology and that rows are active. It depends on HPN-ICF-OID-MIB for its enterprise OID placement and IF-MIB/INET-ADDRESS-MIB for interface and peer-address types, and is deployed on HP ICF-based routers terminating ATM-DXI WAN circuits. Engineers troubleshooting legacy ATM-DXI WAN links use the HPN-ICF-ATM-DXI-MIB MIB to confirm PVC and IP-to-PVC map configuration on the affected interface.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-ATM-DXI-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP Networking (ICF-based) routers and switches with ATM-DXI WAN interfaces

Monitoring Examples

An operator polls hpnicfAtmDxiPvcTable (indexed by ifIndex, VPI, VCI) to confirm hpnicfAtmDxiPvcRowStatus is active and hpnicfAtmDxiPvcEncType matches the remote end's encapsulation, then checks hpnicfAtmDxiMapTable for the expected peer IP-to-PVC mapping; a PVC entry stuck in a non-active row status would indicate a misconfigured or torn-down ATM-DXI circuit blocking traffic to that peer.

What Can Be Monitored

ATM-DXI operating mode
PVC VPI/VCI, encapsulation type, and row status
PVC map count per interface
peer IP-to-PVC address mapping table entries
InARP timer and broadcast-forwarding settings

Imported Objects

From HPN-ICF-OID-MIB

hpnicfCommon

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From RFC1213-MIB

ifIndex

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfAtmDxi	1.3.6.1.4.1.11.2.14.11.15.2.49			This MIB contains objects to manage configuration of ATM-DXI. There are no constraints on this MIB.
hpnicfAtmDxiScalarGroup	1.3.6.1.4.1.11.2.14.11.15.2.49.1
INT hpnicfAtmDxiConfMode	1.3.6.1.4.1.11.2.14.11.15.2.49.1.1	INTEGER	read-only	This node identifies the ATM-DXI mode being used at the ATM-DXI port.
hpnicfAtmDxiIfObjects	1.3.6.1.4.1.11.2.14.11.15.2.49.2
hpnicfAtmDxiPvcTable	1.3.6.1.4.1.11.2.14.11.15.2.49.2.1		not-accessible	This table describes information of PVC in ATM-DXI interface.
hpnicfAtmDxiPvcEntry	1.3.6.1.4.1.11.2.14.11.15.2.49.2.1.1		not-accessible	The entry of hpnicfAtmDxiPvcTable.
I32 hpnicfAtmDxiPvcVpi	1.3.6.1.4.1.11.2.14.11.15.2.49.2.1.1.1	Integer32	not-accessible	The value of VPI. It can't be 0 if hpnicfAtmDxiPvcVci is 0.
I32 hpnicfAtmDxiPvcVci	1.3.6.1.4.1.11.2.14.11.15.2.49.2.1.1.2	Integer32	not-accessible	The value of VCI. It can't be 0 if hpnicfAtmDxiPvcVpi is 0.
I32 hpnicfAtmDxiPvcDFA	1.3.6.1.4.1.11.2.14.11.15.2.49.2.1.1.3	Integer32	read-create	The index of PVC. It is equal with vci and VPI. And this node value is correlate with hpnicfAtmDxiPvcVpi and hpnicfAtmDxiPvcVci.
INT hpnicfAtmDxiPvcEncType	1.3.6.1.4.1.11.2.14.11.15.2.49.2.1.1.4	INTEGER	read-create	Encapsulation type of the frame.
I32 hpnicfAtmDxiPvcMapCount	1.3.6.1.4.1.11.2.14.11.15.2.49.2.1.1.5	Integer32	read-create	The number of map. One map can only associate with one PVC, but one PVC can associate with 32 maps. This node is the map count which one PVC associated with.
ROW hpnicfAtmDxiPvcRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.49.2.1.1.6	RowStatus	read-create	Only support 'destroy' 'createAndGo' and 'active'.
hpnicfAtmDxiMapTable	1.3.6.1.4.1.11.2.14.11.15.2.49.2.2		not-accessible	This table describes PVC map information.
hpnicfAtmDxiMapEntry	1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1		not-accessible	The entry of hpnicfAtmDxiMapTable.
IPt hpnicfAtmDxiMapPeerIpType	1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1.1	InetAddressType	not-accessible	The type of ip address: IPv4 or IPv6.
IP hpnicfAtmDxiMapPeerIp	1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1.2	InetAddress	not-accessible	The peer ip address. This ip address is the peer ip address which the frame will arrive.
I32 hpnicfAtmDxiMapPvcVpi	1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1.3	Integer32	not-accessible	The VPI of PVC. It can't be 0 if hpnicfAtmDxiMapPvcVci is 0.
I32 hpnicfAtmDxiMapPvcVci	1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1.4	Integer32	not-accessible	The VCI of PVC. It can't be 0 if hpnicfAtmDxiMapPvcVpi is 0.
INT hpnicfAtmDxiMapType	1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1.5	INTEGER	not-accessible	Pvc map type.
I32 hpnicfAtmDxiMapInarpTime	1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1.6	Integer32	read-create	The interval time of inarp request. This node describes the interval time inarp request frame sent. If the hpnicfAtmDxiMapType isn't inarp, this value is 0. Its unit is minute.
INT hpnicfAtmDxiMapBroEnable	1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1.7	INTEGER	read-create	Whether ATM-DXI map enable broadcast or not.
ROW hpnicfAtmDxiMapRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1.8	RowStatus	read-create	Only support 'destroy', 'createAndGo' and 'active'.
hpnicfAtmDxiConformance	1.3.6.1.4.1.11.2.14.11.15.2.49.3
hpnicfAtmDxiCompliances	1.3.6.1.4.1.11.2.14.11.15.2.49.3.1
hpnicfAtmDxiCompliance	1.3.6.1.4.1.11.2.14.11.15.2.49.3.1.1			The compliance statement.
hpnicfAtmDxiGroup	1.3.6.1.4.1.11.2.14.11.15.2.49.3.2
hpnicfPVCMAPGroup	1.3.6.1.4.1.11.2.14.11.15.2.49.3.2.1			This group includes nodes which are associated with interface.
hpnicfAtmDxiGeneralGroup	1.3.6.1.4.1.11.2.14.11.15.2.49.3.2.2			This group includes the general nodes about ATM-DXI.

RFC description

Manages configuration of ATM-DXI (Data Exchange Interface) including virtual circuits and network mappings on HP/Huawei devices.

Start monitoring HP Networking (ICF-based) router with ATM-DXI WAN interface with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-ATM-DXI-MIB

What Is HPN-ICF-ATM-DXI-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description