ASCEND-MIBLOADSELECT-MIB

All MIBs › ASCEND-MIBLOADSELECT-MIB

Category: Quality of Service, Vendor: Ascend/Lucent

Description: Manages load balancing and traffic distribution selection policies on Ascend WAN equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ASCEND-MIBLOADSELECT-MIB?

ASCEND-MIBLOADSELECT-MIB is a legacy Ascend Communications (later Lucent, built on ASCEND-MIB) proprietary MIB configuring which card-firmware images ('load select' profiles) are used for a wide range of interface card types. Its profile table, keyed by index, records unknown-cards handling and per-card-type load flags spanning SR/SR2/APXSR, 8-port T1/E1, T3, STM0, various clip cards, 24-port T1/E1, DS3, DS3-ATM, and ATM-HSE cards. As a configuration MIB it lets an administrator confirm which firmware load is selected for each interface card type on a legacy Ascend (Lucent) chassis. It is deployed on legacy Ascend Communications (Lucent) WAN access equipment. Engineers can download the ASCEND-MIBLOADSELECT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ASCEND-MIBLOADSELECT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Legacy Ascend Communications (Lucent) WAN access equipment

Monitoring Examples

An administrator checks loadSelectProfile-Ds3Atm to confirm which firmware load is selected for DS3-ATM cards on a legacy Ascend (Lucent) chassis.

What Can Be Monitored

per-card-type firmware load-select configuration

Imported Objects

From ASCEND-MIB

configuration

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

IpAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT loadSelectProfile_Action_o	1.3.6.1.4.1.529.23.92.1.1.61	INTEGER	read-write
INT loadSelectProfile_AlDmtadslAtm	1.3.6.1.4.1.529.23.92.1.1.45	INTEGER	read-write	Controls whether code images for DMT-ADSL-ATM cards should be stored in Flash
INT loadSelectProfile_Alpme	1.3.6.1.4.1.529.23.92.1.1.76	INTEGER	read-write	Controls whether code images for the APX ALPM for E1 should be stored in Flash
INT loadSelectProfile_Alpmt	1.3.6.1.4.1.529.23.92.1.1.75	INTEGER	read-write	Controls whether code images for the APX ALPM for T1 should be stored in Flash
INT loadSelectProfile_Amdm	1.3.6.1.4.1.529.23.92.1.1.26	INTEGER	read-write	Controls whether code images for OBSOLETE ANALOG MODEM cards should be stored in Flash
INT loadSelectProfile_Anmdm	1.3.6.1.4.1.529.23.92.1.1.27	INTEGER	read-write	Controls whether code images for OBSOLETE analog modem cards should be stored in Flash. Replaced by amdm.
INT loadSelectProfile_AnnexbDmtadsl	1.3.6.1.4.1.529.23.92.1.1.50	INTEGER	read-write	Controls whether code images for 12 port ANNEX B DMT-ADSL-ATM cards should be stored in Flash
INT loadSelectProfile_Apxenet	1.3.6.1.4.1.529.23.92.1.1.82	INTEGER	read-write	Controls whether code images for APXENET card should be stored in flash
INT loadSelectProfile_Apxsr	1.3.6.1.4.1.529.23.92.1.1.5	INTEGER	read-write	Controls whether code images for the APX-SHELF-CONTROLER card should be stored in Flash
INT loadSelectProfile_AtmHse	1.3.6.1.4.1.529.23.92.1.1.68	INTEGER	read-write	Controls whether code images for ATM HSE cards should be stored in Flash
INT loadSelectProfile_Capadsl	1.3.6.1.4.1.529.23.92.1.1.38	INTEGER	read-write	Controls whether code images for CAP-ADSL cards should be stored in Flash
INT loadSelectProfile_Cln	1.3.6.1.4.1.529.23.92.1.1.72	INTEGER	read-write	Controls whether code images for APX 1K Channelized line type cards should be stored in Flash. cln include 2ds3 and 3ds3 cards.
INT loadSelectProfile_Clpme	1.3.6.1.4.1.529.23.92.1.1.13	INTEGER	read-write	Controls whether code images for the APX CLPM for E1 should be stored in Flash
INT loadSelectProfile_Clpmt	1.3.6.1.4.1.529.23.92.1.1.12	INTEGER	read-write	Controls whether code images for APX CLPM for T1 should be stored in Flash
INT loadSelectProfile_Csm3v	1.3.6.1.4.1.529.23.92.1.1.30	INTEGER	read-write	Controls whether code images for CSM3V cards should be stored in Flash
INT loadSelectProfile_Csmx	1.3.6.1.4.1.529.23.92.1.1.28	INTEGER	read-write	Controls whether code images for CSMX cards should be stored in Flash
INT loadSelectProfile_DadslAtm24	1.3.6.1.4.1.529.23.92.1.1.47	INTEGER	read-write	Controls whether code images for 24 port DMT-ADSL-ATM cards should be stored in Flash
INT loadSelectProfile_Dmtadsl	1.3.6.1.4.1.529.23.92.1.1.39	INTEGER	read-write	Controls whether code images for DMT-ADSL cards should be stored in Flash
INT loadSelectProfile_Ds3Atm	1.3.6.1.4.1.529.23.92.1.1.17	INTEGER	read-write	Controls whether code images for DS3-ATM cards should be stored in Flash
INT loadSelectProfile_Ds3Atm2	1.3.6.1.4.1.529.23.92.1.1.56	INTEGER	read-write	Controls whether code images for DS3-ATM2 cards should be stored in Flash
INT loadSelectProfile_E3Atm	1.3.6.1.4.1.529.23.92.1.1.57	INTEGER	read-write	Controls whether code images for E3-ATM cards should be stored in Flash
INT loadSelectProfile_Enet2	1.3.6.1.4.1.529.23.92.1.1.19	INTEGER	read-write	Controls whether code images for ETHERNET2 cards should be stored in Flash
INT loadSelectProfile_Enet3	1.3.6.1.4.1.529.23.92.1.1.20	INTEGER	read-write	Controls whether code images for ETHERNET3 cards should be stored in Flash
INT loadSelectProfile_Enet3nd	1.3.6.1.4.1.529.23.92.1.1.21	INTEGER	read-write	Controls whether code images for ETHERNET3ND cards should be stored in Flash
INT loadSelectProfile_EnetHse	1.3.6.1.4.1.529.23.92.1.1.69	INTEGER	read-write	Controls whether code images for HS ETHERNET card should be stored in Flash
INT loadSelectProfile_EtherDual	1.3.6.1.4.1.529.23.92.1.1.22	INTEGER	read-write	Controls whether code images for DUAL 10/100 ETHERNET cards should be stored in Flash
INT loadSelectProfile_GliteAtm48	1.3.6.1.4.1.529.23.92.1.1.48	INTEGER	read-write	Controls whether code images for 48 port GLITE-DMT-ATM cards should be stored in Flash
INT loadSelectProfile_Hdlc2	1.3.6.1.4.1.529.23.92.1.1.33	INTEGER	read-write	Controls whether code images for HDLC2 cards should be stored in Flash
INT loadSelectProfile_Hdlc2ec	1.3.6.1.4.1.529.23.92.1.1.34	INTEGER	read-write	Controls whether code images for HDLC2EC cards should be stored in Flash
INT loadSelectProfile_Hdsl2	1.3.6.1.4.1.529.23.92.1.1.49	INTEGER	read-write	Controls whether code images for 32 port HDSL2 cards should be stored in Flash
INT loadSelectProfile_Hssi	1.3.6.1.4.1.529.23.92.1.1.36	INTEGER	read-write	Controls whether code images for HSSI cards should be stored in Flash
INT loadSelectProfile_Idsl	1.3.6.1.4.1.529.23.92.1.1.37	INTEGER	read-write	Controls whether code images for IDSL cards should be stored in Flash
INT loadSelectProfile_Ima	1.3.6.1.4.1.529.23.92.1.1.52	INTEGER	read-write	Controls whether code images for 24-port/8-port IMA_T1/IMA_E1 cards should be stored in Flash
INT loadSelectProfile_Index_o	1.3.6.1.4.1.529.23.92.1.1.1	INTEGER	read-only
INT loadSelectProfile_Madd	1.3.6.1.4.1.529.23.92.1.1.29	INTEGER	read-write	Controls whether code images for MADD cards should be stored in Flash
INT loadSelectProfile_Madd3	1.3.6.1.4.1.529.23.92.1.1.31	INTEGER	read-write	Controls whether code images for MADD3 cards should be stored in Flash
INT loadSelectProfile_Mdm56k	1.3.6.1.4.1.529.23.92.1.1.25	INTEGER	read-write	Controls whether code images for OBSOLETE MODEM-56K cards should be stored in Flash
INT loadSelectProfile_MdmV34	1.3.6.1.4.1.529.23.92.1.1.24	INTEGER	read-write	Controls whether code images for MODEM cards should be stored in Flash
INT loadSelectProfile_o24e1	1.3.6.1.4.1.529.23.92.1.1.65	INTEGER	read-write	Controls whether code images for 24 port E1 cards should be stored in Flash
INT loadSelectProfile_o24t1	1.3.6.1.4.1.529.23.92.1.1.64	INTEGER	read-write	Controls whether code images for 24 port T1 cards should be stored in Flash
INT loadSelectProfile_o32DmtAslam	1.3.6.1.4.1.529.23.92.1.1.70	INTEGER	read-write	Controls whether code images for 32 port ASLAM cards should be stored in Flash
INT loadSelectProfile_o40DmtAdsl	1.3.6.1.4.1.529.23.92.1.1.54	INTEGER	read-write	Controls whether code images for 40 port Annex A/C DMT-ATM cards should be stored in Flash
INT loadSelectProfile_o48DmtAdsl	1.3.6.1.4.1.529.23.92.1.1.55	INTEGER	read-write	Controls whether code images for 48 port Annex A/B/C DMT-ATM cards should be stored in Flash
INT loadSelectProfile_o72CtDmtAdsl	1.3.6.1.4.1.529.23.92.1.1.77	INTEGER	read-write	Controls whether code images for 72 port CT DMT-ATM cards should be stored in Flash
INT loadSelectProfile_o72Shdsl	1.3.6.1.4.1.529.23.92.1.1.62	INTEGER	read-write	Controls whether code images for 72 port SHDSL cards should be stored in Flash
INT loadSelectProfile_o8e1	1.3.6.1.4.1.529.23.92.1.1.7	INTEGER	read-write	Controls whether code images for E1 cards should be stored in Flash
INT loadSelectProfile_o8t1	1.3.6.1.4.1.529.23.92.1.1.6	INTEGER	read-write	Controls whether code images for T1 cards should be stored in Flash
INT loadSelectProfile_Oc3Atm	1.3.6.1.4.1.529.23.92.1.1.43	INTEGER	read-write	Controls whether code images for OC3-ATM cards should be stored in Flash
INT loadSelectProfile_Oc3Atm2	1.3.6.1.4.1.529.23.92.1.1.58	INTEGER	read-write	Controls whether code images for OC3-ATM2 cards should be stored in Flash
INT loadSelectProfile_Pctfie	1.3.6.1.4.1.529.23.92.1.1.11	INTEGER	read-write	Controls whether code images for PCTFI E1 cards should be stored in Flash
INT loadSelectProfile_Pctfit	1.3.6.1.4.1.529.23.92.1.1.10	INTEGER	read-write	Controls whether code images for PCTFI T1 cards should be stored in Flash
INT loadSelectProfile_Sdsl	1.3.6.1.4.1.529.23.92.1.1.40	INTEGER	read-write	Controls whether code images for SDSL cards should be stored in Flash
INT loadSelectProfile_Sdsl70d	1.3.6.1.4.1.529.23.92.1.1.41	INTEGER	read-write	Controls whether code images for SDSL70D cards should be stored in Flash
INT loadSelectProfile_Sdsl70v	1.3.6.1.4.1.529.23.92.1.1.42	INTEGER	read-write	Controls whether code images for SDSL70V cards should be stored in Flash
INT loadSelectProfile_SdslAtm	1.3.6.1.4.1.529.23.92.1.1.44	INTEGER	read-write	Controls whether code images for SDSL-ATM cards should be stored in Flash
INT loadSelectProfile_SdslAtmV2	1.3.6.1.4.1.529.23.92.1.1.46	INTEGER	read-write	Controls whether code images for SDSL-ATM-V2 cards should be stored in Flash
INT loadSelectProfile_Sr	1.3.6.1.4.1.529.23.92.1.1.3	INTEGER	read-write	Controls whether code images for the SHELF-CONTROLER card should be stored in Flash
INT loadSelectProfile_Sr2	1.3.6.1.4.1.529.23.92.1.1.4	INTEGER	read-write	Controls whether code images for the SHELF-CONTROLER-2 card should be stored in Flash
INT loadSelectProfile_SrsEther	1.3.6.1.4.1.529.23.92.1.1.23	INTEGER	read-write	Controls whether code images for SRS ETHERNET cards should be stored in Flash
INT loadSelectProfile_Stm0	1.3.6.1.4.1.529.23.92.1.1.9	INTEGER	read-write	Controls whether code images for STM-0 cards should be stored in Flash
INT loadSelectProfile_Stngr32Idsl	1.3.6.1.4.1.529.23.92.1.1.53	INTEGER	read-write	Controls whether code images for STINGER 32 port IDSL cards should be stored in Flash
INT loadSelectProfile_Swan	1.3.6.1.4.1.529.23.92.1.1.35	INTEGER	read-write	Controls whether code images for SWAN cards should be stored in Flash
INT loadSelectProfile_Swan2	1.3.6.1.4.1.529.23.92.1.1.60	INTEGER	read-write	Controls whether code images for SWAN version 2 cards should be stored in Flash
INT loadSelectProfile_T1000	1.3.6.1.4.1.529.23.92.1.1.51	INTEGER	read-write	Controls whether code images for STNGR_T1000 cards should be stored in Flash
INT loadSelectProfile_T3	1.3.6.1.4.1.529.23.92.1.1.8	INTEGER	read-write	Controls whether code images for T3 cards should be stored in Flash
INT loadSelectProfile_Uds3	1.3.6.1.4.1.529.23.92.1.1.16	INTEGER	read-write	Controls whether code images for UDS3 cards should be stored in Flash
INT loadSelectProfile_Ue1	1.3.6.1.4.1.529.23.92.1.1.15	INTEGER	read-write	Controls whether code images for UE1 cards should be stored in Flash
INT loadSelectProfile_UnknownCards	1.3.6.1.4.1.529.23.92.1.1.2	INTEGER	read-write	Controls whether code images for card models which the current software load doesn't know of should be stored in Flash
INT loadSelectProfile_Ut1	1.3.6.1.4.1.529.23.92.1.1.14	INTEGER	read-write	Controls whether code images for UT1 cards should be stored in Flash
INT loadSelectProfile_Vdsl	1.3.6.1.4.1.529.23.92.1.1.71	INTEGER	read-write	Controls whether code images for 24 port VDSL cards should be stored in Flash
INT loadSelectProfile_Vpn	1.3.6.1.4.1.529.23.92.1.1.59	INTEGER	read-write	Controls whether code images for VPN cards should be stored in Flash
mibloadSelectProfile	1.3.6.1.4.1.529.23.92
mibloadSelectProfileEntry	1.3.6.1.4.1.529.23.92.1.1		not-accessible	A mibloadSelectProfile entry containing objects that maps to the parameters of mibloadSelectProfile profile.
mibloadSelectProfileTable	1.3.6.1.4.1.529.23.92.1		not-accessible	A list of mibloadSelectProfile profile entries.

RFC description

Configures MIB load selection profiles for different card types in Ascend networking equipment.

Start monitoring Ascend Communications (Lucent) MAX/Pipeline/TNT WAN access equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ASCEND-MIBLOADSELECT-MIB

What Is ASCEND-MIBLOADSELECT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description