| OID symbolic | OID numeric | Type | Access | Description |
|---|
| INT eventMaximumNumberOfEvents | 1.3.6.1.4.1.529.10.1 | INTEGER | read-only | The maximum number of event entries that can exist
in the event table. |
| INT eventOldestEventIdNumber | 1.3.6.1.4.1.529.10.2 | INTEGER | read-only | The event ID number of the oldest event in the table.
This value will be 0 until the first event occurs. |
| INT eventLatestEventIdNumber | 1.3.6.1.4.1.529.10.3 | INTEGER | read-only | The event ID number of the most recent event in the
table. The SNMP manager should poll this variable
periodically and compare it with the previous poll's
value to detect the presence of new events. A value
of 0 indicates no events exist in the table. |
| eventTable | 1.3.6.1.4.1.529.10.4 | | not-accessible | A list of event entries. |
| eventEntry | 1.3.6.1.4.1.529.10.4.1 | | not-accessible | An entry containing object variables which
describes an event. |
| INT eventIdNumber | 1.3.6.1.4.1.529.10.4.1.1 | INTEGER | read-only | A unique number assigned to every event entry.
Numbers are assigned incrementally starting with
1 and will wraparound if the upper limit (2147483648)
is reached. Until number wraps around, it represents
the total number of events generated. |
| INT eventTimeStamp | 1.3.6.1.4.1.529.10.4.1.2 | INTEGER | read-only | The time of occurence for this event in seconds
since startup. Use 'sysAbsoluteStartupTime'
to convert to absolute time. |
| INT eventType | 1.3.6.1.4.1.529.10.4.1.3 | INTEGER | read-only | Identifies the type of event associated with
this entry.
For incoming MPP calls, the initial serviceChanged(4)
event will be ppp(3). After negotiations complete,
the nameChanged(5) event will specify mpp(5) along
with the name, IP addr, and netmask. |
| INT eventCallReferenceNum | 1.3.6.1.4.1.529.10.4.1.4 | INTEGER | read-only | A unique number assigned to identify a particular
session. The start of a session is marked by either
a callOriginated(1) or a callAnswered(2) event. The
end of a session is marked by a callCleared(3) event.
Numbers are assigned incrementally starting with 1
and will wraparound if the upper limit (2147483648)
is reached. |
| INT eventDataRate | 1.3.6.1.4.1.529.10.4.1.5 | INTEGER | read-only | The receive data rate for ISDN calls or the baud rate
for modem calls. Rate is given as bits-per-second.
Applicable for all 'eventType's except callCleared(3).
For callCleared(3), 0 will be returned. For modem
calls, value will be 0 for callAnswered(2) events
since rate is unknown at the time incoming call is
detected. |
| INT eventSlotNumber | 1.3.6.1.4.1.529.10.4.1.6 | INTEGER | read-only | Identifies the slot containing the line call was
received or sent over. It's value ranges between 1
and the value slotNumber in the 'slots' group. This
variable is equivalent to slotIndex in Ascend's
slot group. Applicable only if 'eventType' is
callOriginated(1), callAnswered(2), callCleared(3),
or baudRateChanged(6) otherwise 0 will be returned. |
| INT eventSlotLineNumber | 1.3.6.1.4.1.529.10.4.1.7 | INTEGER | read-only | Identifies the line for network slots. This variable
is equivalent to slotItemIndex in Ascend's slot group.
Applicable only if 'eventType' is callOriginated(1),
callAnswered(2), callCleared(3), or baudRateChanged(6)
otherwise 0 will be returned. |
| INT eventSlotChannelNumber | 1.3.6.1.4.1.529.10.4.1.8 | INTEGER | read-only | Identifies the channel for the particular line
identified by eventSlotLineNumber.
Applicable only if 'eventType' is callOriginated(1),
callAnswered(2), callCleared(3), or baudRateChanged(6)
otherwise 0 will be returned. |
| INT eventModemSlotNumber | 1.3.6.1.4.1.529.10.4.1.9 | INTEGER | read-only | Identifies the modem slot on the device. It's value
ranges between 0 and the value slotNumber in Ascend's
slots group. A value of 0 indicates modems are not
associated with this connection. Applicable only if
'eventType' is callOriginated(1), callAnswered(2), or
baudRateChanged(6) otherwise 0 will be returned. |
| INT eventModemOnSlot | 1.3.6.1.4.1.529.10.4.1.10 | INTEGER | read-only | Identifies the particular modem within a modem slot.
A value of 0 indicates modems are not associated with
this connection. Applicable only if 'eventType' is
callOriginated(1), callAnswered(2), or baudRateChanged(6)
otherwise 0 will be returned. |
| INT eventCurrentService | 1.3.6.1.4.1.529.10.4.1.11 | INTEGER | read-only | The current service provided to the remote user.
Applicable only if 'eventType' is serviceChanged(4)
or nameChanged(5) otherwise none(1) will be returned. |
| STR eventUserName | 1.3.6.1.4.1.529.10.4.1.12 | DisplayString | read-only | The name of the remote user. Applicable only if
'eventType' is serviceChanged(4) or nameChanged(5).
The null string is returned if the name is unknown
or if not applicable. For a Radius DNIS authenticated
session, value of User-Name provided in Radius
reply will be used if no second tier authentication
is involved. |
| IP eventUserIPAddress | 1.3.6.1.4.1.529.10.4.1.13 | IpAddress | read-only | The IP address of the remote user or login host.
Applicable only if 'eventType' is serviceChanged(4)
nameChanged(5) or callCleared. Value of a raw tcp
login host IP address is returned once a raw tcp
connection was successfully connected earlier in
a serviceChanged event.
The value 0.0.0.0 is returned if address is unknown
or if not applicable. |
| IP eventUserSubnetMask | 1.3.6.1.4.1.529.10.4.1.14 | IpAddress | read-only | The subnet mask of the remote user. Applicable only
if 'eventType' is serviceChanged(4) or nameChanged(5).
The value 0.0.0.0 is returned if mask is unknown or
if not applicable. |
| INT eventDisconnectReason | 1.3.6.1.4.1.529.10.4.1.15 | INTEGER | read-only | Reason for call disconnecting. Applicable only if
'eventType' is callCleared(3) otherwise notApplicable(1)
will be returned. |
| INT eventConnectProgress | 1.3.6.1.4.1.529.10.4.1.16 | INTEGER | read-only | State of the connection before disconnecting.
Applicable only if 'eventType' is callCleared(3)
otherwise prNotApplicable(1) will be returned. |
| INT eventCallCharge | 1.3.6.1.4.1.529.10.4.1.17 | INTEGER | read-only | The call charge for this user.
Applicable only if 'eventType' is callCleared( 3 )
otherwise 0 will be returned.
A value of 0 is returned if entry is invalid. |
| STR eventCalledPartyID | 1.3.6.1.4.1.529.10.4.1.18 | DisplayString | read-only | The called party ID. Applicable only if
'eventType' is callCleared(3),
callAnswered(2) or callOriginated(2)
The null string is returned if
the called party ID is unknown or if is not
applicable. |
| STR eventCallingPartyID | 1.3.6.1.4.1.529.10.4.1.19 | DisplayString | read-only | The calling party ID. Applicable only if
'eventType' is callCleared(3),
callAnswered(2) or callOriginated(2)
The null string is returned if
the calling party ID is unknown or if is not
applicable. |
| INT eventInOctets | 1.3.6.1.4.1.529.10.4.1.20 | INTEGER | read-only | Identifies the total number of InOctets
during this call.
Applicable only if 'eventType' is callCleared(3),
otherwise 0 will be returned. |
| INT eventOutOctets | 1.3.6.1.4.1.529.10.4.1.21 | INTEGER | read-only | Identifies the total number of OutOctets
during this call.
Applicable only if 'eventType' is callCleared(3),
otherwise 0 will be returned. |
| INT eventMultiLinkID | 1.3.6.1.4.1.529.10.4.1.22 | INTEGER | read-only | MultiLinkID applies to sessions that are part of a
Multilink bundle. Applicable if 'eventType' is
callCleared(3), serviceChanged(4) or nameChanged(5)
else 0 will be returned. |
| INT eventXmitRate | 1.3.6.1.4.1.529.10.4.1.23 | INTEGER | read-only | The transmit data rate for ISDN calls or the baud rate
for modem calls. Rate is given as bits-per-second.
Applicable for all 'eventType's except callCleared(3).
For callCleared(3), 0 will be returned. For modem
calls, value will be 0 for callAnswered(2) events
since rate is unknown at the time incoming call is
detected. |
| INT eventTrunkGroup | 1.3.6.1.4.1.529.10.4.1.24 | INTEGER | read-only | Trunk Group Number
for outgoing call only
Applicable only if 'eventType' is callEstablished or
callOrignated,
otherwise 0 will be returned. |
| INT eventCurrentActiveCalls | 1.3.6.1.4.1.529.10.5 | INTEGER | read-only | The number of calls currently active. |
| INT eventCurrentActiveSessions | 1.3.6.1.4.1.529.10.6 | INTEGER | read-only | The number of sessions currently active. |
| CTR eventTotalCalls | 1.3.6.1.4.1.529.10.7 | Counter | read-only | The total number of active calls since system
startup. |
| CTR eventTotalSessions | 1.3.6.1.4.1.529.10.8 | Counter | read-only | The total number of active sessions since system
startup. |
| CTR eventTotalCallsAnswered | 1.3.6.1.4.1.529.10.9 | Counter | read-only | The total number of calls answered since system
startup. |
| CTR eventTotalCallsOriginated | 1.3.6.1.4.1.529.10.10 | Counter | read-only | The total number of calls originated since system
startup. |
| CTR eventTotalCallsCleared | 1.3.6.1.4.1.529.10.11 | Counter | read-only | The total number of calls cleared since system
startup. |
| CTR eventTotalBaudRateChanges | 1.3.6.1.4.1.529.10.12 | Counter | read-only | The total number of baud rate change events
since system startup. |
| CTR eventTotalServiceChanges | 1.3.6.1.4.1.529.10.13 | Counter | read-only | The total number of service change events
since system startup. |
| CTR eventTotalNameChanges | 1.3.6.1.4.1.529.10.14 | Counter | read-only | The total number of name change events
since system startup. |
| CTR eventTotalNoModems | 1.3.6.1.4.1.529.10.15 | Counter | read-only | The total number of unaccepted calls because of
the unavailability of modems, since system startup. |
