GBNL3If-MIB

All MIBs › GBNL3If-MIB

Organization: Greentech

Last Updated: 2001-05-10

Description: GBNL3If-MIB module

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is GBNL3If-MIB?

GBNL3If-MIB is a Greentech (GBN switch platform) proprietary MIB configuring ARP, Super-VLAN, and DHCP Option 82 behavior. Its objects cover an ARP-proxy flag, a Super-VLAN table (VLAN ID, switched/super flags, status), an ARP table (IP/MAC address, ifIndex, VLAN, port, type, row status, aging), and Option 82 enable/strategy settings. As a configuration/status MIB it lets an administrator confirm ARP entries and Super-VLAN sub-VLAN relationships on a Greentech GBN switch. It is deployed on Greentech GBN switches. Engineers can download the GBNL3If-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in GBNL3If-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Greentech GBN switches

Monitoring Examples

An administrator checks arpTable and superVLANTable to confirm ARP resolution and Super-VLAN configuration on a Greentech GBN switch.

What Can Be Monitored

ARP table and Super-VLAN configuration

Imported Objects

From GREENTECH-MASTER-MIB

gbnL3

OBJECT-IDENTITY

From Q-BRIDGE-MIB

VlanIndex

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
gbnL3If	1.3.6.1.4.1.13464.1.2.5.1			GBN Generic router id MIB definition.
gbnL3SuperVLAN	1.3.6.1.4.1.13464.1.2.5.1.2
INT arpProxy	1.3.6.1.4.1.13464.1.2.5.1.2.1	INTEGER	read-write	Enable/disable the ARP proxy.
superVLANTable	1.3.6.1.4.1.13464.1.2.5.1.2.2		not-accessible	A table of superVLAN.When create a new entry,must set superVLANStatus to be active to create a entry first,or set superVLANsw/superVLANsuper fisrt will return no suchinstanc error
superVLANEntry	1.3.6.1.4.1.13464.1.2.5.1.2.2.1		not-accessible	Table entry for superVLAN.
INT superVLANVID	1.3.6.1.4.1.13464.1.2.5.1.2.2.1.1	INTEGER	read-only	vlan id.
INT superVLANsw	1.3.6.1.4.1.13464.1.2.5.1.2.2.1.2	INTEGER	read-write	sw,0 means not existting.
T/F superVLANsuper	1.3.6.1.4.1.13464.1.2.5.1.2.2.1.3	TruthValue	read-write	The interface is superVLAN or not
ROW superVLANStatus	1.3.6.1.4.1.13464.1.2.5.1.2.2.1.4	RowStatus	read-write	the status of this entry
gbnL3Arp	1.3.6.1.4.1.13464.1.2.5.1.3
arpTable	1.3.6.1.4.1.13464.1.2.5.1.3.1		not-accessible	This form to the system ARP cache table has been defined in rfc1213 two ARP table of the system: at the group and ip group atTable ipNetToMediaTable, but this is not the two tables of information and switch port VLAN information, it is definition of this extension table.
arpEntry	1.3.6.1.4.1.13464.1.2.5.1.3.1.1		not-accessible	The system ARP cache table.
IP arpIpAddress	1.3.6.1.4.1.13464.1.2.5.1.3.1.1.1	IpAddress	read-only	IP address as index.
MAC arpMacAddress	1.3.6.1.4.1.13464.1.2.5.1.3.1.1.2	MacAddress	read-write	IP addresses to MAC addresses.
INT arpIfIndex	1.3.6.1.4.1.13464.1.2.5.1.3.1.1.3	INTEGER	read-only	IP addresses where the interface index.
VLA arpVlan	1.3.6.1.4.1.13464.1.2.5.1.3.1.1.4	VlanIndex	read-write	IP address where the VLAN.
INT arpPort	1.3.6.1.4.1.13464.1.2.5.1.3.1.1.5	INTEGER	read-write	Learning to switch port number IP address.
INT arpType	1.3.6.1.4.1.13464.1.2.5.1.3.1.1.6	INTEGER	read-write	This ARP table entry type.
ROW arpRowStatus	1.3.6.1.4.1.13464.1.2.5.1.3.1.1.7	RowStatus	read-write	The ARP Table entry status, used to add / delete static ARP entries to dynamic ARP table entry if the entry is returned an error.
INT arpAging	1.3.6.1.4.1.13464.1.2.5.1.3.2	INTEGER	read-write	The age time of dynamic arp entry.Unit is minute.Default is 20.
gbnL3DHCP	1.3.6.1.4.1.13464.1.2.5.1.4
INT option82	1.3.6.1.4.1.13464.1.2.5.1.4.1	INTEGER	read-write	Enable/disable option82.Default is disalbe
INT option82Strategy	1.3.6.1.4.1.13464.1.2.5.1.4.2	INTEGER	read-write	When turned on in option82 DHCP relay receives the option with option82 packet content strategy adopted. Drop to drop packets, keep option82 to preserve options for the contents of the packet, and replace to replace the contents of the packets in the option82. defaults to replace.

RFC description

Manages Layer 3 interface configuration including Super VLAN, ARP proxy, and DHCP settings on Greentech network equipment.

Start monitoring Greentech (GBN) managed switch (ARP/Super-VLAN/DHCP Option 82) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download GBNL3If-MIB

What Is GBNL3If-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description