| OID symbolic | OID numeric | Type | Access | Description |
|---|
| softwareManagerMIB | 1.3.6.1.4.1.4115.1.8.1.10 | | | This MIB manages the software on the
ARRIS EdgeQAM products |
| smControlGroup | 1.3.6.1.4.1.4115.1.8.1.10.1 | | | |
| INT smReloadAction | 1.3.6.1.4.1.4115.1.8.1.10.1.1 | INTEGER | read-write | Force a reload of the ARRIS product. The command is applied to both WANs
when equipped. The load marked as boot in the Software Table will be loaded.
nil(1) - Do nothing
reloadConfigSave(2) - Saves the current configuration before reloading
reloadNoConfigSave(3) - Reloads without saving configuration |
| INT smConfigFileAction | 1.3.6.1.4.1.4115.1.8.1.10.1.2 | INTEGER | read-write | Perform various actions on the configuration file, as directed
below.
nil(1) - Do nothing
saveRunningConfig(2) - Copies the running configuration to the
startup configuration.
eraseStartupConfig(3) - Erases the startup configuration. You
may want to do this before a reboot (without config file save)
to get a default configured system.
uploadStartupConfigToServer(4) - Using the server information
in the configFileTransfer group, this will upload the current
startup-configuration to the default directory on the server.
If you need upload directory control, use the
configFileTransfer |
| smSoftwareListGroup | 1.3.6.1.4.1.4115.1.8.1.10.2 | | | |
| smSoftwareListTable | 1.3.6.1.4.1.4115.1.8.1.10.2.1 | | not-accessible | Table of images installed on the flash disk |
| smSoftwareListEntry | 1.3.6.1.4.1.4115.1.8.1.10.2.1.1 | | not-accessible | . |
| U32 smSoftwareEntryIndex | 1.3.6.1.4.1.4115.1.8.1.10.2.1.1.1 | Unsigned32 | not-accessible | image index |
| OCT smSoftwareEntryFilename | 1.3.6.1.4.1.4115.1.8.1.10.2.1.1.2 | OCTET STRING | read-only | Name of the image file |
| OCT smSoftwareEntryVersion | 1.3.6.1.4.1.4115.1.8.1.10.2.1.1.3 | OCTET STRING | read-only | image version |
| DAT smSoftwareEntryDate | 1.3.6.1.4.1.4115.1.8.1.10.2.1.1.4 | DateAndTime | read-only | Date image created |
| INT smSoftwareEntryState | 1.3.6.1.4.1.4115.1.8.1.10.2.1.1.5 | INTEGER | read-only | State of the load file.
valid means the software load has been properly downloaded
and can be loaded onto the system.
corrupt means there was a problem tranferring the load and
it cannot be loaded onto the system.
unknown means that the software load has not yet been validated
by the system, and may or may not be valid. |
| I32 smSoftwareEntrySize | 1.3.6.1.4.1.4115.1.8.1.10.2.1.1.6 | Integer32 | read-only | file size |
| INT smSoftwareEntryStatus | 1.3.6.1.4.1.4115.1.8.1.10.2.1.1.7 | INTEGER | read-only | Status of software may be running-boot, running, boot or inactive
running-boot(1) indicates that the load is running AND is the boot load.
running(2) means the software is currently running on the box, but
is not the boot load.
boot(3) means that the selected load will boot on next restart.
Confirm by checking ksSMBootFileName.
inactive(4) indicates the load is neither running nor set to boot. |
| INT smSoftwareEntryAction | 1.3.6.1.4.1.4115.1.8.1.10.2.1.1.8 | INTEGER | read-write | Perform an action on this software load entry.
To make the current software load the boot load, select
makeBoot(2).
When set to upload(3), this software load will be sent
to the server using the settings specified in the
softwareDownloadGroup MIB objects.
This method cannot specify an upload path on the server
for the software load. The load will appear in the default
directory on the server for the specified transfer protocol.
For control over the upload path, please use the
smSoftwareDownloadGroup directly.
Selecting delete(4) will delete the load from the system. |
| smConfigFileListGroup | 1.3.6.1.4.1.4115.1.8.1.10.3 | | | |
| smConfigFileListTable | 1.3.6.1.4.1.4115.1.8.1.10.3.1 | | not-accessible | Table of configuration files or scripts on flash disk |
| smConfigFileListEntry | 1.3.6.1.4.1.4115.1.8.1.10.3.1.1 | | not-accessible | . |
| U32 smConfigFileEntryIndex | 1.3.6.1.4.1.4115.1.8.1.10.3.1.1.1 | Unsigned32 | not-accessible | image index |
| OCT smConfigFileEntryName | 1.3.6.1.4.1.4115.1.8.1.10.3.1.1.2 | OCTET STRING | read-only | Name of the file |
| DAT smConfigFileTimestamp | 1.3.6.1.4.1.4115.1.8.1.10.3.1.1.3 | DateAndTime | read-only | Timestamp of the configuration file |
| INT smConfigFileEntryAction | 1.3.6.1.4.1.4115.1.8.1.10.3.1.1.4 | INTEGER | read-write | Actions to perform on the current configuration file.
To make this configuration file the startup configuration file,
select makeStartupConfig(2). Be sure not to overwrite the new
startup-configuration when reloading the system.
To copy the current configuration file into the running
configuration, select copyIntoRunningConfig(3). Don't forget
to save the new running configuration if necessary.
When set to upload(4), this software load will be sent
to the server using the settings specified in the
smConfigFileDownloadGroup MIB objects.
This method cannot specify an upload path on the server
for the software load. The load will appear in the default
directory on the server for the specified transfer protocol.
For control over the upload path, please use the
smConfigFileDownloadGroup directly.
Finally, to delete the configuration file, select delete(5). |
| smSoftwareTransferGroup | 1.3.6.1.4.1.4115.1.8.1.10.4 | | | |
| INT smSoftwareTransferDevice | 1.3.6.1.4.1.4115.1.8.1.10.4.1 | INTEGER | read-write | Specify protocol to use for software load transfers |
| OCT smSoftwareTransferHostname | 1.3.6.1.4.1.4115.1.8.1.10.4.2 | OCTET STRING | read-write | Server ip address or hostname |
| OCT smSoftwareTransferUsername | 1.3.6.1.4.1.4115.1.8.1.10.4.3 | OCTET STRING | read-write | Server user name |
| OCT smSoftwareTransferPassword | 1.3.6.1.4.1.4115.1.8.1.10.4.4 | OCTET STRING | read-write | Server user password |
| OCT smSoftwareTransferPath | 1.3.6.1.4.1.4115.1.8.1.10.4.5 | OCTET STRING | read-write | Path and filename for image file on tftp, ftp or nfs |
| INT smSoftwareTransferControl | 1.3.6.1.4.1.4115.1.8.1.10.4.6 | INTEGER | read-write | Control the transfer as follows:
abort(1) - Will abort the transfer in progress.
download(2) - Starts a transfer to the ARRIS device
upload(3) - Transfer specified load to the server
downloadAsBoot(4) will download the software image to the
ARRIS device and make it the next boot image |
| INT smSoftwareTransferStatus | 1.3.6.1.4.1.4115.1.8.1.10.4.7 | INTEGER | read-only | Indication of the last transfer attempt as follows:
none(1) indicates no images have been transferred since
the system rebooted.
inprogress(2) - Indicates there is an active transfer
occurring.
finished(3) - Indicates the transfer is complete.
filenameError(4) - Indicates there was a problem with either
the path and/or filename, or the wrong server was specified and
the file was not found.
hostnameError(5) - Indicates a problem where the hostname could
not be resolved, or an incorrectly formatted IP address was specified. |
| smConfigFileTransferGroup | 1.3.6.1.4.1.4115.1.8.1.10.5 | | | |
| INT smConfigFileTransferDevice | 1.3.6.1.4.1.4115.1.8.1.10.5.1 | INTEGER | read-write | Specify protocol to use for file transfers |
| OCT smConfigFileTransferHostname | 1.3.6.1.4.1.4115.1.8.1.10.5.2 | OCTET STRING | read-write | Server ip address or hostname |
| OCT smConfigFileTransferUsername | 1.3.6.1.4.1.4115.1.8.1.10.5.3 | OCTET STRING | read-write | Server user name |
| OCT smConfigFileTransferPassword | 1.3.6.1.4.1.4115.1.8.1.10.5.4 | OCTET STRING | read-write | Server user password |
| OCT smConfigFileTransferPath | 1.3.6.1.4.1.4115.1.8.1.10.5.5 | OCTET STRING | read-write | Path and filename of the configuration file
on the source device. |
| OCT smConfigFileTransferTargetPath | 1.3.6.1.4.1.4115.1.8.1.10.5.6 | OCTET STRING | read-write | Path and filename of the configuration file
on the target device. |
| INT smConfigFileTransferControl | 1.3.6.1.4.1.4115.1.8.1.10.5.7 | INTEGER | read-write | Control the transfer as follows:
abort(1) - Will abort the transfer in progress.
download(2) - Starts a transfer to the ARRIS device
upload(3) - Transfer specified file to the server
downloadAsStartup(4) Transfer the config file and make it the
startup configuration |
| INT smConfigFileTransferStatus | 1.3.6.1.4.1.4115.1.8.1.10.5.8 | INTEGER | read-only | Indication of the last transfer attempt as follows:
none(1) indicates no files have been transferred since
the system rebooted.
inprogress(2) - Indicates there is an active transfer
occurring.
finished(3) - Indicates the transfer is complete.
filenameError(4) - Indicates there was a problem with either
the path and/or filename, or the wrong server was specified and
the file was not found.
hostnameError(5) - Indicates a problem where the hostname could
not be resolved, or an incorrectly formatted IP address was specified. |
