ARRIS-D5-TEST-MIB

All MIBs › ARRIS-D5-TEST-MIB

Organization: Arris International

Last Updated: 2009-01-15

Category: DOCSIS and Cable, Vendor: ARRIS

Description: ARRIS D5 video platform diagnostic and test function management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ARRIS-D5-TEST-MIB?

ARRIS-D5-TEST-MIB is a vendor-specific MIB for the ARRIS D5-UEQAM (Universal Edge QAM) platform, used in cable television headend and video delivery infrastructure. It is a diagnostics and manufacturing-test module, exposing a table of test results along with objects to configure and trigger tests rather than ordinary operational counters. Its monitoring relevance is centered on device self-test and hardware verification status: pass/fail results for individual diagnostic tests reveal whether internal hardware subsystems are functioning correctly, which is useful both in factory production testing and in field troubleshooting of a suspect unit. No sample objects were present in the source excerpt, so specific table or object names cannot be confirmed here. It is typically used by manufacturing test stations and by field/support engineers running on-demand diagnostics against a D5-UEQAM chassis rather than by routine NMS polling. Engineers can download the ARRIS-D5-TEST-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ARRIS-D5-TEST-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ARRIS D5-UEQAM (Universal Edge QAM)
cable headend video/DOCSIS platform

Monitoring Examples

The module description describes a table of test results with pass/fail and test-specific detail, plus objects to configure and run tests, but no sample_objects were supplied in the source data, so no concrete object or table names can be cited here. A typical realistic use would be triggering a diagnostic test and then polling the results table for a pass/fail status and detail code per test. Without confirmed object names, a specific polling walkthrough cannot be responsibly constructed from this input.

What Can Be Monitored

diagnostic test pass/fail results
test-specific result detail
manufacturing/self-test status

Imported Objects

From ARRIS-MIB

arrisD5UEQam

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
d5TestMIB	1.3.6.1.4.1.4115.1.8.1.19			This MIB returns a table of test results that have been run on the D5-UEQAM. It reports general pass or fail test results as well as test specific result information. It also allows for tests to be configured and run to support diagnostics and the manufacturing process.
d5TestControl	1.3.6.1.4.1.4115.1.8.1.19.1
U32 d5TestControlSlot	1.3.6.1.4.1.4115.1.8.1.19.1.1	Unsigned32	read-write	Slot number on which to perform a test
U32 d5TestControlCategory	1.3.6.1.4.1.4115.1.8.1.19.1.2	Unsigned32	read-write	Category of test to configure
U32 d5TestControlNumber	1.3.6.1.4.1.4115.1.8.1.19.1.3	Unsigned32	read-write	Test number of test to configure
D5T d5TestControlState	1.3.6.1.4.1.4115.1.8.1.19.1.4	D5TestState	read-write	State to set for the test.
U32 d5TestControlIterations	1.3.6.1.4.1.4115.1.8.1.19.1.5	Unsigned32	read-write	Number of times to run the test. 0 to run repeatedly until stopped.
U32 d5TestControlArg0	1.3.6.1.4.1.4115.1.8.1.19.1.6	Unsigned32	read-write	Optional argument to control test behaviour
U32 d5TestControlArg1	1.3.6.1.4.1.4115.1.8.1.19.1.7	Unsigned32	read-write	Optional argument to control test behaviour
U32 d5TestControlArg2	1.3.6.1.4.1.4115.1.8.1.19.1.8	Unsigned32	read-write	Optional argument to control test behaviour
U32 d5TestControlArg3	1.3.6.1.4.1.4115.1.8.1.19.1.9	Unsigned32	read-write	Optional argument to control test behaviour
d5TestResultTable	1.3.6.1.4.1.4115.1.8.1.19.2		not-accessible	This table contains a list of D5 test-results.
d5TestResultEntry	1.3.6.1.4.1.4115.1.8.1.19.2.1		not-accessible	An entry for a single categorised test and corresponding result.
U32 d5TestSlot	1.3.6.1.4.1.4115.1.8.1.19.2.1.1	Unsigned32	not-accessible	D5 slot containing the card on which the test was run
U32 d5TestCategory	1.3.6.1.4.1.4115.1.8.1.19.2.1.2	Unsigned32	not-accessible	Test category
U32 d5TestNumber	1.3.6.1.4.1.4115.1.8.1.19.2.1.3	Unsigned32	not-accessible	Test number, unique withing this test category.
STR d5TestDescr	1.3.6.1.4.1.4115.1.8.1.19.2.1.4	DisplayString	read-only	Brief description of the test
D5T d5TestStatus	1.3.6.1.4.1.4115.1.8.1.19.2.1.5	D5TestStatus	read-only	Current state of this test
DAT d5TestLastRunTime	1.3.6.1.4.1.4115.1.8.1.19.2.1.6	DateAndTime	read-only	Last time this test was run
D5T d5TestResult	1.3.6.1.4.1.4115.1.8.1.19.2.1.7	D5TestResult	read-only	Test result summary
U32 d5TestResultVector0	1.3.6.1.4.1.4115.1.8.1.19.2.1.8	Unsigned32	read-only	Result data specific to the test in this row
U32 d5TestResultVector1	1.3.6.1.4.1.4115.1.8.1.19.2.1.9	Unsigned32	read-only	Result data specific to the test in this row
U32 d5TestResultVector2	1.3.6.1.4.1.4115.1.8.1.19.2.1.10	Unsigned32	read-only	Result data specific to the test in this row
U32 d5TestResultVector3	1.3.6.1.4.1.4115.1.8.1.19.2.1.11	Unsigned32	read-only	Result data specific to the test in this row
U32 d5TestResultVector4	1.3.6.1.4.1.4115.1.8.1.19.2.1.12	Unsigned32	read-only	Result data specific to the test in this row
U32 d5TestResultVector5	1.3.6.1.4.1.4115.1.8.1.19.2.1.13	Unsigned32	read-only	Result data specific to the test in this row
U32 d5TestResultVector6	1.3.6.1.4.1.4115.1.8.1.19.2.1.14	Unsigned32	read-only	Result data specific to the test in this row
U32 d5TestResultVector7	1.3.6.1.4.1.4115.1.8.1.19.2.1.15	Unsigned32	read-only	Result data specific to the test in this row
U32 d5TestResultVector8	1.3.6.1.4.1.4115.1.8.1.19.2.1.16	Unsigned32	read-only	Result data specific to the test in this row
U32 d5TestResultVector9	1.3.6.1.4.1.4115.1.8.1.19.2.1.17	Unsigned32	read-only	Result data specific to the test in this row
U32 d5TestResultVector10	1.3.6.1.4.1.4115.1.8.1.19.2.1.18	Unsigned32	read-only	Result data specific to the test in this row
U32 d5TestResultVector11	1.3.6.1.4.1.4115.1.8.1.19.2.1.19	Unsigned32	read-only	Result data specific to the test in this row
U32 d5TestResultVector12	1.3.6.1.4.1.4115.1.8.1.19.2.1.20	Unsigned32	read-only	Result data specific to the test in this row
U32 d5TestResultVector13	1.3.6.1.4.1.4115.1.8.1.19.2.1.21	Unsigned32	read-only	Result data specific to the test in this row
U32 d5TestResultVector14	1.3.6.1.4.1.4115.1.8.1.19.2.1.22	Unsigned32	read-only	Result data specific to the test in this row
U32 d5TestResultVector15	1.3.6.1.4.1.4115.1.8.1.19.2.1.23	Unsigned32	read-only	Result data specific to the test in this row
d5TestMibConformance	1.3.6.1.4.1.4115.1.8.1.19.99
d5TestMibGroups	1.3.6.1.4.1.4115.1.8.1.19.99.1
d5TestMibGroup	1.3.6.1.4.1.4115.1.8.1.19.99.1.1			Description.
d5TestMibCompliances	1.3.6.1.4.1.4115.1.8.1.19.99.2
d5TestMibCompliance	1.3.6.1.4.1.4115.1.8.1.19.99.2.1			Description.

RFC description

Vendor-private MIB for ARRIS D5 cable modem platform testing and diagnostics.

Start monitoring ARRIS D5 Universal Edge QAM (UEQ) (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ARRIS-D5-TEST-MIB

What Is ARRIS-D5-TEST-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description