All MIBs › APERTUS-TNSERVER-MIB
Category: Device Management
Description: Apertus Technologies translation/naming server management for network policy resolution.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is APERTUS-TNSERVER-MIB?
APERTUS-TNSERVER-MIB is a private MIB from Apertus Technologies for its translation/naming server product, referenced internally as part of the "apertus/express" product line, used for network name/policy resolution services. It exposes configuration and operational-limit objects such as server release/version, service change notice (SCN), instance name, maximum concurrent sessions, keep-alive timer/timeout/retry settings, inactivity limit, allowable name types, and port count. Its monitoring relevance is chiefly software/service-status oriented -- letting an operator confirm the naming server's identity and version (aperTnServAdmRelease, aperTnServAdmSCN), and watch operational health indicators like aperTnServAdmUndefinedClients (clients failing to resolve/register) and session-capacity settings against actual load. No standards-MIB dependency is evident from the available data; it appears to be a fully self-contained vendor MIB. It would have been deployed on Apertus translation/naming server appliances within telecom or enterprise network signaling environments in the 1990s-2000s, and engineers researching legacy deployments can download the APERTUS-TNSERVER-MIB file to load it into a MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in APERTUS-TNSERVER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Apertus Technologies translation/naming server appliance
Monitoring Examples
Polling aperTnServAdmMaxSessions alongside aperTnServAdmUndefinedClients rising would indicate the naming server is nearing capacity or seeing misconfigured clients that fail to register properly. aperTnServAdmKeepAliveTimer, aperTnServAdmKeepAliveResponseTimeout, and aperTnServAdmKeepAliveRetryCount together define how aggressively the server detects unresponsive peers, and an operator would tune these to balance false-positive disconnects against detection speed. aperTnServAdmRelease and aperTnServMibVersionNumber would be checked during an upgrade to confirm the running software version matches expectations.
What Can Be Monitored
- server software release/version
- maximum concurrent sessions
- keep-alive timer/timeout/retry settings
- inactivity timeout
- undefined/unregistered clients
- allowable name types
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter | |
| IpAddress | |
| TimeTicks | |
| enterprises |
From RFC1213-MIB
| DisplayString |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| aperTnServAdm | 1.3.6.1.4.1.543.3.1.2 | |||
| aperTnServAdm3270 | 1.3.6.1.4.1.543.3.1.2.2 | |||
| TN3 aperTnServAdm3270DefaultAttnKey | 1.3.6.1.4.1.543.3.1.2.2.3 | Tn3270AidKey | read-only | The default 3270 AID key used by non-TN3270E clients to simulate the 3270 ATTN function. none(1) indicates that this function is not available. |
| TN3 aperTnServAdm3270DefaultPasswordKey | 1.3.6.1.4.1.543.3.1.2.2.4 | Tn3270AidKey | read-only | The default 3270 AID key used by clients to change the password of the Telnet User Connection Profile used by an active tn3270 session. none(1) indicates that this function is not available. |
| TN3 aperTnServAdm3270DefaultStatusKey | 1.3.6.1.4.1.543.3.1.2.2.1 | Tn3270AidKey | read-only | The default 3270 AID key used by clients to display information about the tn3270 session. none(1) indicates that this function is not available. |
| TN3 aperTnServAdm3270DefaultSysReqKey | 1.3.6.1.4.1.543.3.1.2.2.2 | Tn3270AidKey | read-only | The default 3270 AID key used by non-TN3270E clients to simulate the 3270 SYSREQ function. none(1) indicates that this function is not available. |
| INT aperTnServAdm3270LoadBalanceMode | 1.3.6.1.4.1.543.3.1.2.2.5 | INTEGER | read-only | The load balance selection criteria used when the TNSERVER is making a choice of a destination from several that satisfy client connection request. links(1) indicates to balance load across all acceptable link stations, while first_avail_lu(2) indicates to chose the first available LU device that satisfies the client connection request. |
| INT aperTnServAdm3270NumSessions | 1.3.6.1.4.1.543.3.1.2.2.6 | INTEGER | read-only | The number of Telnet 3270 display and printer Session Profiles, i.e. the number of rows in aperTnServAdm3270SessionTable. |
| STR aperTnServAdm3270SessionDescription | 1.3.6.1.4.1.543.3.1.2.2.8.1.3 | DisplayString | read-only | A description of the 3270 session. |
| STR aperTnServAdm3270SessionDestination | 1.3.6.1.4.1.543.3.1.2.2.8.1.7 | DisplayString | read-only | This string specifies a name or a list of names, which determine the possible destinations for the telnet 3270 client. If more than one name is listed, then the actual destination depends on the value of aperTnServAdm3270LoadBalanceMode. For 3270 printers, only one name is allowed. Examples of possible destination names: DisplayPool1 , DisplayPool2 DisplayPool:3 PrinterLu |
| aperTnServAdm3270SessionEntry | 1.3.6.1.4.1.543.3.1.2.2.8.1 | not-accessible | This table contains information for Telnet Group Connection Profiles. | |
| INT aperTnServAdm3270SessionGroupOrUser | 1.3.6.1.4.1.543.3.1.2.2.8.1.4 | INTEGER | read-only | This value specifies whether the session is a group session, i.e. one available to any user related to that group, or a user session, i.e. defined for a specific user connection profile. |
| STR aperTnServAdm3270SessionGroupOrUserName | 1.3.6.1.4.1.543.3.1.2.2.8.1.1 | DisplayString | read-only | The name of the user (or group) connection profile for the session defined. |
| INT aperTnServAdm3270SessionModel | 1.3.6.1.4.1.543.3.1.2.2.8.1.6 | INTEGER | read-only | If the type of session is a terminal, this variable specifies the model number of the 3270 session. dynamic(5) means that the model size will be set by the client. |
| STR aperTnServAdm3270SessionName | 1.3.6.1.4.1.543.3.1.2.2.8.1.2 | DisplayString | read-only | The name of the 3270 session. |
| aperTnServAdm3270SessionTable | 1.3.6.1.4.1.543.3.1.2.2.8 | not-accessible | Telnet Group Connection Profiles. | |
| TIK aperTnServAdm3270SessionTableLastChange | 1.3.6.1.4.1.543.3.1.2.2.7 | TimeTicks | read-only | Time stamp of the last time a row was added to or deleted from the 3270 session table. This variable can be used to facilitate monitoring of the 3270 session table. |
| INT aperTnServAdm3270SessionType | 1.3.6.1.4.1.543.3.1.2.2.8.1.5 | INTEGER | read-only | Specifies the type of 3270 session - terminal vs. printer. |
| aperTnServAdm5250 | 1.3.6.1.4.1.543.3.1.2.3 | |||
| TN5 aperTnServAdm5250DefaultPasswordKey | 1.3.6.1.4.1.543.3.1.2.3.2 | Tn5250AidKey | read-only | The default 5250 AID key used by clients to change the password of the Telnet User Connection Profile used by an active tn5250 session. none(1) indicates that this function is not available. |
| TN5 aperTnServAdm5250DefaultStatusKey | 1.3.6.1.4.1.543.3.1.2.3.1 | Tn5250AidKey | read-only | The default 5250 AID key used by clients to display information about the tn5250 session. none(1) indicates that this function is not available. |
| INT aperTnServAdm5250NumSessions | 1.3.6.1.4.1.543.3.1.2.3.3 | INTEGER | read-only | The number of Telnet 5250 display and printer Session Profiles, i.e. the number of rows in aperTnServAdm5250SessionTable. |
| INT aperTnServAdm5250SessionAutoDeviceConfiguration | 1.3.6.1.4.1.543.3.1.2.3.5.1.10 | INTEGER | read-only | Specifies whether 5250 passthrough automatic device configuration is supported on the 5250 system that to which the telnet client is connecting. If the value is off(2), then the name of the controller to be used will be specified in this row as well. |
| INT aperTnServAdm5250SessionAutoSignon | 1.3.6.1.4.1.543.3.1.2.3.5.1.5 | INTEGER | read-only | This variable specifies whether automatic signon is enabled. If it is, then the 5250 passthrough session uses automatic signon. This feature can be used to bypass the initial 5250 signon screen. |
| STR aperTnServAdm5250SessionDescription | 1.3.6.1.4.1.543.3.1.2.3.5.1.3 | DisplayString | read-only | A description of the 5250 session. |
| STR aperTnServAdm5250SessionDestination | 1.3.6.1.4.1.543.3.1.2.3.5.1.13 | DisplayString | read-only | This string specifies a name or a list of names, which determine the possible destinations for the telnet 5250 client. If more than one name is listed, then the actual destination chosen will be the first symbolic destination name in the list with a free session. |
| aperTnServAdm5250SessionEntry | 1.3.6.1.4.1.543.3.1.2.3.5.1 | not-accessible | This table contains information for Telnet Group Connection Profiles. | |
| INT aperTnServAdm5250SessionGroupOrUser | 1.3.6.1.4.1.543.3.1.2.3.5.1.4 | INTEGER | read-only | This value specifies whether the session is a group session, i.e. one available to any user related to that group, or a user session, i.e. defined for a specific user connection profile. |
| STR aperTnServAdm5250SessionGroupOrUserName | 1.3.6.1.4.1.543.3.1.2.3.5.1.1 | DisplayString | read-only | The name of the user (or group) connection profile for the session defined. |
| STR aperTnServAdm5250SessionInitialLibrary | 1.3.6.1.4.1.543.3.1.2.3.5.1.9 | DisplayString | read-only | If automatic signon is enabled, this variables specifies the name of the 5250 initial library on the remote system. |
| STR aperTnServAdm5250SessionInitialMenu | 1.3.6.1.4.1.543.3.1.2.3.5.1.7 | DisplayString | read-only | If automatic signon is enabled, this variables specifies the name of the 5250 initial menu on the remote system. |
| STR aperTnServAdm5250SessionInitialProgram | 1.3.6.1.4.1.543.3.1.2.3.5.1.8 | DisplayString | read-only | If automatic signon is enabled, this variables specifies the name of the 5250 initial program on the remote system. |
| STR aperTnServAdm5250SessionName | 1.3.6.1.4.1.543.3.1.2.3.5.1.2 | DisplayString | read-only | The name of the 5250 session. |
| STR aperTnServAdm5250SessionRemoteUser | 1.3.6.1.4.1.543.3.1.2.3.5.1.6 | DisplayString | read-only | If automatic signon is enabled, this variables specifies the name of the 5250 user as defined on the remote system. |
| aperTnServAdm5250SessionTable | 1.3.6.1.4.1.543.3.1.2.3.5 | not-accessible | Telnet Group Connection Profiles. | |
| TIK aperTnServAdm5250SessionTableLastChange | 1.3.6.1.4.1.543.3.1.2.3.4 | TimeTicks | read-only | Time stamp of the last time a row was added to or deleted from the 5250 session table. This variable can be used to facilitate monitoring of the 5250 session table. |
| INT aperTnServAdm5250SessionVirtualDeviceOrController | 1.3.6.1.4.1.543.3.1.2.3.5.1.11 | INTEGER | read-only | If automatic device configuration is not supported for this 5250 session, then this variable specifies whether the supplied name is a device name or a controller name. |
| STR aperTnServAdm5250SessionVirtualDeviceOrControllerName | 1.3.6.1.4.1.543.3.1.2.3.5.1.12 | DisplayString | read-only | If automatic device configuration is not supported for this 5250 session, then this variable specifies the name of the device or controller. |
| INT aperTnServAdmAllowableNameTypes | 1.3.6.1.4.1.543.3.1.2.1.10 | INTEGER | read-only | What type of destination name types are allowed as device names specified in telnet client connect requests. The value user(2) indicates that only Client Connection Profile Names are allowed, while all(1) indicates that Client Connection Profile Names and LU names are allowed. |
| INT aperTnServAdmDefaultInactivityLimit | 1.3.6.1.4.1.543.3.1.2.1.8 | INTEGER | read-only | The number of minutes allowed for an idle session, i.e. no datastream events, after which a telnet connection is terminated. If the value is zero, there is no inactivity limit defined. This value may be overridden on a per user basis. |
| aperTnServAdmGen | 1.3.6.1.4.1.543.3.1.2.1 | |||
| TN3 aperTnServAdmGroup3270AttnKey | 1.3.6.1.4.1.543.3.1.2.1.17.1.8 | Tn3270AidKey | read-only | The Aid key which is to be interpreted as the 3270 Attention key. This feature is useful for telnet clients incapable of generating the Attention key. Of course, the aid key configured as the SYS_REQ key can not be sent to the host application. |
| TN3 aperTnServAdmGroup3270PasswordKey | 1.3.6.1.4.1.543.3.1.2.1.17.1.6 | Tn3270AidKey | read-only | The Aid key which is to be interpreted as the change password key. Entering this key will cause a dialogue to appear on the telnet client's screen that allows the user to change the password. |
| TN3 aperTnServAdmGroup3270StatusKey | 1.3.6.1.4.1.543.3.1.2.1.17.1.5 | Tn3270AidKey | read-only | The Aid key which is to be interpreted as the session status key. Entering this key will cause a dialogue to appear on the telnet client's screen that lists the status of the 3270 session. |
| TN3 aperTnServAdmGroup3270SysReqKey | 1.3.6.1.4.1.543.3.1.2.1.17.1.7 | Tn3270AidKey | read-only | The Aid key which is to be interpreted as the 3270 SYS_REQ key. This feature is useful for telnet clients incapable of generating the SYS_REQ key. Of course, the aid key configured as the SYS_REQ key can not be sent to the host application. |
| TN5 aperTnServAdmGroup5250PasswordKey | 1.3.6.1.4.1.543.3.1.2.1.17.1.10 | Tn5250AidKey | read-only | The Aid key which is to be interpreted as the change password key. Entering this key will cause a dialogue to appear on the telnet client's screen that allows the user to change the password. |
| TN5 aperTnServAdmGroup5250StatusKey | 1.3.6.1.4.1.543.3.1.2.1.17.1.9 | Tn5250AidKey | read-only | The Aid key which is to be interpreted as the session status key. Entering this key will cause a dialogue to appear on the telnet client's screen that lists the status of the 5250 passthrough session. |
| STR aperTnServAdmGroupDescription | 1.3.6.1.4.1.543.3.1.2.1.17.1.2 | DisplayString | read-only | A short description of the Telnet Group Connection Profile. |
| aperTnServAdmGroupEntry | 1.3.6.1.4.1.543.3.1.2.1.17.1 | not-accessible | This table contains information for Telnet Group Connection Profiles. | |
| INT aperTnServAdmGroupInactivityLimit | 1.3.6.1.4.1.543.3.1.2.1.17.1.4 | INTEGER | read-only | The number of minutes allowed for an idle connection, i.e. no datastream events, after which a telnet connection is terminated. If the value is zero, there is no inactivity limit defined. If the value is 0xffff the value from aperTnServAdmDefaultInactivityLimit will be used. |
| INT aperTnServAdmGroupMenuMode | 1.3.6.1.4.1.543.3.1.2.1.17.1.3 | INTEGER | read-only | This variable indicates whether the TNSERVER will assign a device when a choice of devices fit the requested session service or if the telnet client will be prompted with choices. The value default(3) indicates the value from aperTnServAdmMenuMode will be used. |
| STR aperTnServAdmGroupName | 1.3.6.1.4.1.543.3.1.2.1.17.1.1 | DisplayString | read-only | The name of the Telnet Group Connection Profile. |
| aperTnServAdmGroupTable | 1.3.6.1.4.1.543.3.1.2.1.17 | not-accessible | Telnet Group Connection Profiles. | |
| TIK aperTnServAdmGroupTableLastChange | 1.3.6.1.4.1.543.3.1.2.1.16 | TimeTicks | read-only | Time stamp of the last time a row was added to or deleted from the user table. This variable can be used to facilitate monitoring of the user table. |
| INT aperTnServAdmKeepAliveResponseTimeout | 1.3.6.1.4.1.543.3.1.2.1.6 | INTEGER | read-only | The number of seconds the server will wait for keep-alive response when testing for dead socket. |
| INT aperTnServAdmKeepAliveRetryCount | 1.3.6.1.4.1.543.3.1.2.1.7 | INTEGER | read-only | The number of keep-alive polls permitted until a socket is considered dead. After this many retries, the socket will be terminated. |
| INT aperTnServAdmKeepAliveTimer | 1.3.6.1.4.1.543.3.1.2.1.5 | INTEGER | read-only | The number of minutes for the keep-alive timer. The value zero indicates no keep-alive timer is configured. |
| INT aperTnServAdmMaxSessions | 1.3.6.1.4.1.543.3.1.2.1.4 | INTEGER | read-only | Maximum number of sessions currently licensed for the TNSERVER. This includes 3270 and 5250 sessions, as well as all SNA sessions |
| INT aperTnServAdmMenuMode | 1.3.6.1.4.1.543.3.1.2.1.13 | INTEGER | read-only | When a telnet client specifies a device name that contains a choice of destinations, this variable indicates the action of the server. If on(1), then the client is presented with a list of possible destinations. If off(2), then the TNSERVER picks one of the alternatives. |
| INT aperTnServAdmNumGroups | 1.3.6.1.4.1.543.3.1.2.1.15 | INTEGER | read-only | The number of Telnet Group Connection Profiles, i.e. the number of rows in aperTnServAdmGroupTable. |
| INT aperTnServAdmNumPorts | 1.3.6.1.4.1.543.3.1.2.1.11 | INTEGER | read-only | The number of TCP ports on which the TNSERVER is listening for incoming telnet client connections. |
| INT aperTnServAdmNumRoutingEntries | 1.3.6.1.4.1.543.3.1.2.1.21 | INTEGER | read-only | The number of Telnet Client Routing Entries, i.e. the number of rows in aperTnServAdmRoutingTable. |
| INT aperTnServAdmNumSecurAccEntries | 1.3.6.1.4.1.543.3.1.2.1.24 | INTEGER | read-only | The number of Telnet Client Security Access Entries, i.e. the number of rows in aperTnServAdmSecurAccTable. |
| INT aperTnServAdmNumUsers | 1.3.6.1.4.1.543.3.1.2.1.18 | INTEGER | read-only | The number of Telnet User Connection Profiles, i.e. the number of rows in aperTnServAdmUserTable. |
| INT aperTnServAdmPasswordLimit | 1.3.6.1.4.1.543.3.1.2.1.14 | INTEGER | read-only | The number of times an invalid password will be allowed to be entered before the Telnet Client Connection Profile will be marked as invalid. The value 0 indicates that there is no limit. |
| INT aperTnServAdmPort | 1.3.6.1.4.1.543.3.1.2.1.12.1.1 | INTEGER | read-only | A TCP/IP port |
| aperTnServAdmPortEntry | 1.3.6.1.4.1.543.3.1.2.1.12.1 | not-accessible | This table contains TCP/IP ports. The OID of the instance actually contains the port number. That is, if the three ports 23, 7713 and 3050 are in the list, the OID's of the three elements of this array are aperTnServAdmPort.23 , aperTnServAdmPort.7713 , and aperTnServAdmPort.3050 . When sets are supported, writing an instance of this variable adds that port to the list. To retrieve all ports in the list, the getnext operator should be used. Retrieve the value of aperTnServAdmNumPorts, and do that many getnext operations. When sets are supported, writing an instance of this variable will delete(0) or add(1) the port from/to the list. For example, setting the instance aperTnServAdmPorts.3050 to 0 will delete 3050 from the list of ports. Setting aperTnServAdmPorts.3051 to 1 will add 3051 to the port list. | |
| aperTnServAdmPortTable | 1.3.6.1.4.1.543.3.1.2.1.12 | not-accessible | Table of ports. | |
| STR aperTnServAdmRelease | 1.3.6.1.4.1.543.3.1.2.1.1 | DisplayString | read-only | Release level of the TNSERVER. This is contained in three components. The first version of the product will have a release level of '2.2.0' |
| STR aperTnServAdmRoutingDescription | 1.3.6.1.4.1.543.3.1.2.1.23.1.5 | DisplayString | read-only | A description of the Telnet Client Routing Entry. |
| STR aperTnServAdmRoutingDestination | 1.3.6.1.4.1.543.3.1.2.1.23.1.7 | DisplayString | read-only | This string specifies a name or a list of names, which determine the possible destinations for the telnet client. For 3270 sessions, if more than one name is listed, then the actual destination depends on the value of aperTnServAdm3270LoadBalanceMode. For 5250 sessions, the destination picked will be the first one with a free session. For 3270 printers, only one name is allowed. |
| INT aperTnServAdmRoutingDestinationType | 1.3.6.1.4.1.543.3.1.2.1.23.1.6 | INTEGER | read-only | This column describes what type of names are contained in the aperTnServAdmRoutingDestination. The value user(1) specifies a Telnet Client Connection Profile. lu(2) specifies either a 3270 LU Pool or a 3270 printer LU. The value symbolic_destination(3) specifies the name of the CPIC symbolic destination name used to determine the 5250 passthrough session. |
| INT aperTnServAdmRoutingDeviceType | 1.3.6.1.4.1.543.3.1.2.1.23.1.3 | INTEGER | read-only | The type of device connecting to the server. |
| aperTnServAdmRoutingEntry | 1.3.6.1.4.1.543.3.1.2.1.23.1 | not-accessible | This table contains information for Telnet Client Routing Entries. | |
| INT aperTnServAdmRoutingModelType | 1.3.6.1.4.1.543.3.1.2.1.23.1.4 | INTEGER | read-only | If the requested device type is a 3270 display, then this variable specifies the 3270 model type requested by the telnet client. |
| INT aperTnServAdmRoutingPort | 1.3.6.1.4.1.543.3.1.2.1.23.1.2 | INTEGER | read-only | The Server Port on which this connection request will arrive. Negative one means 'any port'. |
| STR aperTnServAdmRoutingSourceIp | 1.3.6.1.4.1.543.3.1.2.1.23.1.1 | DisplayString | read-only | This string identifies the IP address (or set of IP addresses) where a telnet client connection request may originate. This column and other columns in the row are used as selection criteria to determine if an incoming telnet connection request will use the destination named in one of the columns of this row. Examples: 111.222.*.1-33 111.222.*.* 111.222.2-245.34-50 111.222.254.2 100.204.105.1-33 |
| aperTnServAdmRoutingTable | 1.3.6.1.4.1.543.3.1.2.1.23 | not-accessible | Telnet Client Routing Table. | |
| TIK aperTnServAdmRoutingTableLastChange | 1.3.6.1.4.1.543.3.1.2.1.22 | TimeTicks | read-only | Time stamp of the last time a row was added to or deleted from the user table. This variable can be used to facilitate monitoring of the user table. |
| INT aperTnServAdmSCN | 1.3.6.1.4.1.543.3.1.2.1.2 | INTEGER | read-only | The Source Control Number of the TNSERVER product. This number helps to identify what patches have been applied to product since installation. |
| STR aperTnServAdmSecurAccDescription | 1.3.6.1.4.1.543.3.1.2.1.26.1.2 | DisplayString | read-only | A description of the Telnet Client Security Access Entry. |
| STR aperTnServAdmSecurAccDestination | 1.3.6.1.4.1.543.3.1.2.1.26.1.3 | DisplayString | read-only | This string specifies a name or a list of names. If a telnet client whose IP address matches the index of this row uses a device name other than one in this list, the connection request is rejected. A blank aperTnServAdmSecurAccDestination means that all device names are valid. |
| aperTnServAdmSecurAccEntry | 1.3.6.1.4.1.543.3.1.2.1.26.1 | not-accessible | This table contains information for Telnet Client Security Access Entries. | |
| STR aperTnServAdmSecurAccSourceIp | 1.3.6.1.4.1.543.3.1.2.1.26.1.1 | DisplayString | read-only | This string identifies the IP address (or set of IP addresses) where a telnet client connection request may originate. This column and other columns in the row are used as selection criteria to determine if an incoming telnet connection request will use the destination named in one of the columns of this row. Examples: 111.222.*.1-33 111.222.*.* 111.222.2-245.34-50 111.222.254.2 100.204.105.1-33 |
| aperTnServAdmSecurAccTable | 1.3.6.1.4.1.543.3.1.2.1.26 | not-accessible | Telnet Client Security Access Table. | |
| TIK aperTnServAdmSecurAccTableLastChange | 1.3.6.1.4.1.543.3.1.2.1.25 | TimeTicks | read-only | Time stamp of the last time a row was added to or deleted from the user table. This variable can be used to facilitate monitoring of the user table. |
| STR aperTnServAdmServerInstanceName | 1.3.6.1.4.1.543.3.1.2.1.3 | DisplayString | read-only | The EXPRESS telnet server Domain Name. |
| INT aperTnServAdmUndefinedClients | 1.3.6.1.4.1.543.3.1.2.1.9 | INTEGER | read-only | Indicates whether the TNSERVER will reject connection requests from clients whose IP address is not contained in the Client Routing Table. If the value is prompt(1), when a telnet client with an address not in the routing table attempts to connect the TNSERVER, it will be prompted for the name of the device to which it should connect. |
| TN3 aperTnServAdmUser3270AttnKey | 1.3.6.1.4.1.543.3.1.2.1.20.1.11 | Tn3270AidKey | read-only | The Aid key which is to be interpreted as the 3270 Attention key. This feature is useful for telnet clients incapable of generating the Attention key. Of course, the aid key configured as the SYS_REQ key can not be sent to the host application. |
| TN3 aperTnServAdmUser3270PasswordKey | 1.3.6.1.4.1.543.3.1.2.1.20.1.9 | Tn3270AidKey | read-only | The Aid key which is to be interpreted as the change password key. Entering this key will cause a dialogue to appear on the telnet client's screen that allows the user to change the password. |
| TN3 aperTnServAdmUser3270StatusKey | 1.3.6.1.4.1.543.3.1.2.1.20.1.8 | Tn3270AidKey | read-only | The Aid key which is to be interpreted as the session status key. Entering this key will cause a dialogue to appear on the telnet client's screen that lists the status of the 3270 session. |
| TN3 aperTnServAdmUser3270SysReqKey | 1.3.6.1.4.1.543.3.1.2.1.20.1.10 | Tn3270AidKey | read-only | The Aid key which is to be interpreted as the 3270 SYS_REQ key. This feature is useful for telnet clients incapable of generating the SYS_REQ key. Of course, the aid key configured as the SYS_REQ key can not be sent to the host application. |
| TN5 aperTnServAdmUser5250PasswordKey | 1.3.6.1.4.1.543.3.1.2.1.20.1.13 | Tn5250AidKey | read-only | The Aid key which is to be interpreted as the change password key. Entering this key will cause a dialogue to appear on the telnet client's screen that allows the user to change the password. |
| TN5 aperTnServAdmUser5250StatusKey | 1.3.6.1.4.1.543.3.1.2.1.20.1.12 | Tn5250AidKey | read-only | The Aid key which is to be interpreted as the session status key. Entering this key will cause a dialogue to appear on the telnet client's screen that lists the status of the 5250 passthrough session. |
| INT aperTnServAdmUserBadPasswordCounter | 1.3.6.1.4.1.543.3.1.2.1.20.1.5 | INTEGER | read-only | The number of consecutive attempts of a telnet client to access the TNSERVER with this user name but with an incorrect password. A correct password will always reset this counter. |
| STR aperTnServAdmUserDescription | 1.3.6.1.4.1.543.3.1.2.1.20.1.2 | DisplayString | read-only | A short description of the Telnet User Connection Profile. |
| INT aperTnServAdmUserEncryptedPassword | 1.3.6.1.4.1.543.3.1.2.1.20.1.4 | INTEGER | read-only | The password of the user encrypted to an integer. |
| aperTnServAdmUserEntry | 1.3.6.1.4.1.543.3.1.2.1.20.1 | not-accessible | This table contains information for Telnet User Connection Profiles. | |
| INT aperTnServAdmUserInactivityLimit | 1.3.6.1.4.1.543.3.1.2.1.20.1.7 | INTEGER | read-only | The number of minutes allowed for an idle connection, i.e. no datastream events, after which a telnet connection is terminated. If the value is zero, there is no inactivity limit defined. If the value is 0xffff the value from aperTnServAdmDefaultInactivityLimit will be used. |
| INT aperTnServAdmUserMenuMode | 1.3.6.1.4.1.543.3.1.2.1.20.1.6 | INTEGER | read-only | This variable indicates whether the TNSERVER will assign a device when a choice of devices fit the requested session service or if the telnet client will be prompted with choices. The value default(3) indicates the value from aperTnServAdmMenuMode will be used. |
| STR aperTnServAdmUserName | 1.3.6.1.4.1.543.3.1.2.1.20.1.1 | DisplayString | read-only | The name of the Telnet User Connection Profile. |
| INT aperTnServAdmUserPasswordRequired | 1.3.6.1.4.1.543.3.1.2.1.20.1.3 | INTEGER | read-only | If this variable is yes(1), then a telnet client will be prompted for a password when trying to connect to the TNSERVER using the name of the user profile. |
| aperTnServAdmUserTable | 1.3.6.1.4.1.543.3.1.2.1.20 | not-accessible | Telnet User Connection Profiles. | |
| TIK aperTnServAdmUserTableLastChange | 1.3.6.1.4.1.543.3.1.2.1.19 | TimeTicks | read-only | Time stamp of the last time a row was added to or deleted from the user table. This variable can be used to facilitate monitoring of the user table. |
| aperTnServMIB | 1.3.6.1.4.1.543.3.1 | |||
| INT aperTnServMibVersionNumber | 1.3.6.1.4.1.543.3.1.1 | INTEGER | read-only | The version number of this MIB. The version of the MIB which matches the description in this document is 1. |
| aperTnServOper | 1.3.6.1.4.1.543.3.1.3 | |||
| aperTnServOper3270 | 1.3.6.1.4.1.543.3.1.3.3 | |||
| STR aperTnServOper3270AlsName | 1.3.6.1.4.1.543.3.1.3.3.2.1.1 | DisplayString | read-only | This variable identifies which SNA link station the session is active on. |
| STR aperTnServOper3270AssociatedPrinter | 1.3.6.1.4.1.543.3.1.3.3.2.1.12 | DisplayString | read-only | If the type of LU is display, then this variable specifies the 3270 printer LU, if any, that is associated with the display. |
| IP aperTnServOper3270ClientIP | 1.3.6.1.4.1.543.3.1.3.3.2.1.3 | IpAddress | read-only | The IP address of the telnet client. |
| INT aperTnServOper3270ClientPort | 1.3.6.1.4.1.543.3.1.3.3.2.1.4 | INTEGER | read-only | The TCP port of the telnet client. |
| aperTnServOper3270Entry | 1.3.6.1.4.1.543.3.1.3.3.2.1 | not-accessible | This table contains 3270 LU information. | |
| INT aperTnServOper3270KeyboardLock | 1.3.6.1.4.1.543.3.1.3.3.2.1.9 | INTEGER | read-only | This field indicates if the keyboard has been locked as per a 3270 status line. If the system or connection does not support keyboard lock, the entry will be unlocked(2). |
| INT aperTnServOper3270LuLuState | 1.3.6.1.4.1.543.3.1.3.3.2.1.8 | INTEGER | read-only | The state of the LU-LU session. active(1) means that a BIND, +RSP(BIND) has been exchanged. |
| INT aperTnServOper3270LuNumber | 1.3.6.1.4.1.543.3.1.3.3.2.1.2 | INTEGER | read-only | This variable identifies the SNA LU number of the 3270 session. |
| INT aperTnServOper3270LuState | 1.3.6.1.4.1.543.3.1.3.3.2.1.6 | INTEGER | read-only | The state of the 3270 LU. enabled(2) means that the LU is configured and enabled on the server, connected(3) means it is enabled and connected to some client. |
| INT aperTnServOper3270LuType | 1.3.6.1.4.1.543.3.1.3.3.2.1.5 | INTEGER | read-only | The type of 3270 LU. |
| INT aperTnServOper3270ModelNumber | 1.3.6.1.4.1.543.3.1.3.3.2.1.11 | INTEGER | read-only | If the type of LU is display, then this variable specifies the type of terminal in regard to screen sizes. |
| STR aperTnServOper3270NetworkQualifiedSluName | 1.3.6.1.4.1.543.3.1.3.3.2.1.10 | DisplayString | read-only | This is the network qualified name of the secondary LU, if known. This variable may be null if SLU name is not included in the BIND which established the LU-LU session. |
| INT aperTnServOper3270NumActive | 1.3.6.1.4.1.543.3.1.3.3.1 | INTEGER | read-only | The number of active 3270 LU's. |
| INT aperTnServOper3270SscpLuState | 1.3.6.1.4.1.543.3.1.3.3.2.1.7 | INTEGER | read-only | The state of the SSCP-LU session. active(1) means that an ACTLU, +RSP(ACTLU) has been exchanged. |
| aperTnServOper3270Table | 1.3.6.1.4.1.543.3.1.3.3.2 | not-accessible | SNA session information for 3270 LU's. | |
| aperTnServOper5250 | 1.3.6.1.4.1.543.3.1.3.4 | |||
| STR aperTnServOper5250AlsName | 1.3.6.1.4.1.543.3.1.3.4.3.1.4 | DisplayString | read-only | The name of the SNA link station over which the session is active. |
| INT aperTnServOper5250AppcSessId | 1.3.6.1.4.1.543.3.1.3.4.3.1.1 | INTEGER | read-only | This variable identifies the APPC session used for the 5250 passthrough session. |
| IP aperTnServOper5250ClientIP | 1.3.6.1.4.1.543.3.1.3.4.3.1.2 | IpAddress | read-only | The IP address of the telnet client. |
| INT aperTnServOper5250ClientPort | 1.3.6.1.4.1.543.3.1.3.4.3.1.3 | INTEGER | read-only | The TCP port of the telnet client. |
| aperTnServOper5250Entry | 1.3.6.1.4.1.543.3.1.3.4.3.1 | not-accessible | This table contains 5250 session information. | |
| INT aperTnServOper5250KeyboardLock | 1.3.6.1.4.1.543.3.1.3.4.3.1.9 | INTEGER | read-only | This field indicates if the keyboard has been locked as per a 5250 status line. If the system or connection does not support keyboard lock, the value is unlocked(2). |
| STR aperTnServOper5250LocalLuName | 1.3.6.1.4.1.543.3.1.3.4.3.1.6 | DisplayString | read-only | The name of the local LU being used for the 5250 passthrough session. |
| STR aperTnServOper5250ModeName | 1.3.6.1.4.1.543.3.1.3.4.3.1.8 | DisplayString | read-only | The name of the APPC mode being used for the 5250 passthrough session. |
| INT aperTnServOper5250NumActive | 1.3.6.1.4.1.543.3.1.3.4.1 | INTEGER | read-only | The number of active 5250 sessions. |
| STR aperTnServOper5250RemoteLuName | 1.3.6.1.4.1.543.3.1.3.4.3.1.7 | DisplayString | read-only | The name of the remote LU being used for the 5250 passthrough session. This typically identifies the 5250 system where the user's applications are running. |
| STR aperTnServOper5250SymbolicDestination | 1.3.6.1.4.1.543.3.1.3.4.3.1.5 | DisplayString | read-only | The name of the CPIC symbolic destination used for the 5250 passthrough session allocation. |
| aperTnServOper5250Table | 1.3.6.1.4.1.543.3.1.3.4.3 | not-accessible | SNA session information for 5250 sessions. | |
| TIK aperTnServOper5250TableLastChange | 1.3.6.1.4.1.543.3.1.3.4.2 | TimeTicks | read-only | Time stamp of the last time a row was added to or deleted from the 5250 session table. This variable can be used to facilitate monitoring of the 5250 session table. |
| INT aperTnServOperActiveSessions | 1.3.6.1.4.1.543.3.1.3.1.2 | INTEGER | read-only | Number of SNA sessions currently active. In particular, it is the number of 3270 LU's assigned to devices plus the number of LU6.2 LU-LU sessions. |
| aperTnServOperConns | 1.3.6.1.4.1.543.3.1.3.2 | |||
| STR aperTnServOperConnsAlsName | 1.3.6.1.4.1.543.3.1.3.2.3.1.6 | DisplayString | read-only | If this is a telnet 3270 session, then this variable identifies which SNA link station the session is active on. This information, as well as the LU number, is used to identify which particular 3270 session a telnet connection is assigned. This value is valid only if the state of the session is active. |
| INT aperTnServOperConnsAppcSessId | 1.3.6.1.4.1.543.3.1.3.2.3.1.5 | INTEGER | read-only | If this is a telnet 5250 session, then this variable identifies the APPC session used for the 5250 passthrough session. This value is valid only if the state of the session is active. |
| CTR aperTnServOperConnsBytesInbound | 1.3.6.1.4.1.543.3.1.3.2.3.1.16 | Counter | read-only | This value indicates the number of bytes transmitted by the Telnet Server to the remote 3270 or 5250 application. |
| CTR aperTnServOperConnsBytesOutbound | 1.3.6.1.4.1.543.3.1.3.2.3.1.15 | Counter | read-only | This value indicates the number of bytes received by the Telnet Server from the remote 3270 or 5250 application. |
| IP aperTnServOperConnsClientIP | 1.3.6.1.4.1.543.3.1.3.2.3.1.1 | IpAddress | read-only | The IP address of the telnet client. |
| INT aperTnServOperConnsClientPort | 1.3.6.1.4.1.543.3.1.3.2.3.1.2 | INTEGER | read-only | The TCP port of the telnet client. |
| STR aperTnServOperConnsDeviceName | 1.3.6.1.4.1.543.3.1.3.2.3.1.12 | DisplayString | read-only | The device name associated with the telnet session. For a 3270 display, this name is of the form :. For a 3270 printer it is . For a 5250 session, it is the name of the symbolic destination. |
| aperTnServOperConnsEntry | 1.3.6.1.4.1.543.3.1.3.2.3.1 | not-accessible | This table contains connection information for client IP and port. | |
| INT aperTnServOperConnsInactivityLimit | 1.3.6.1.4.1.543.3.1.3.2.3.1.10 | INTEGER | read-only | The inactivity limit of the telnet connection. This value specifies how long in minutes to allow a quiescent session, i.e. one with no data stream events, to be connected before the server will bring it down. |
| INT aperTnServOperConnsLuNumber | 1.3.6.1.4.1.543.3.1.3.2.3.1.7 | INTEGER | read-only | If this is a telnet 3270 session, then this variable identifies the SNA LU number of the 3270 session. This information, as well as the ALS name, is used to identify which particular 3270 session a telnet connection is assigned. This value is valid only if the state of the session is active. |
| INT aperTnServOperConnsNumActive | 1.3.6.1.4.1.543.3.1.3.2.1 | INTEGER | read-only | The number of active 3270 and 5250 telnet connections, i.e. the number of rows in aperTnServOperConnsTable. |
| INT aperTnServOperConnsServerPort | 1.3.6.1.4.1.543.3.1.3.2.3.1.3 | INTEGER | read-only | The TCP port of the TNSERVER which this client connected to. |
| STR aperTnServOperConnsSessionName | 1.3.6.1.4.1.543.3.1.3.2.3.1.14 | DisplayString | read-only | The name of the Session Definition identified by the client, or picked by the TNSERVER, when a telnet session was requested. This name is undefined if the session was named via destination, i.e. LU name or SymbolicDestination. |
| INT aperTnServOperConnsState | 1.3.6.1.4.1.543.3.1.3.2.3.1.8 | INTEGER | read-only | The state of the telnet connection: connecting(1) Server has received TCP call packet negotiating(2) Server and client are negotiating Telnet options menu(3) Server is presenting menu's to client to determine destination reserving(4) Server is reserving a free 3270 LU sessionpending(5) Server is waiting for APPC session allocation active(6) Telnet client is connected to remote application disconnecting(7) Server is closing TCP socket other(8) State is not one of the above |
| aperTnServOperConnsTable | 1.3.6.1.4.1.543.3.1.3.2.3 | not-accessible | Connection information broken down by client IP address and client port number. | |
| TIK aperTnServOperConnsTableLastChange | 1.3.6.1.4.1.543.3.1.3.2.2 | TimeTicks | read-only | Time stamp of the last time a row was added to or deleted from the connection table. This variable can be used to facilitate monitoring of the connection table. |
| TIK aperTnServOperConnsTimeSinceLastEvent | 1.3.6.1.4.1.543.3.1.3.2.3.1.11 | TimeTicks | read-only | The time expired since last datastream event was seen by the Telnet server for this telnet connection, in units of 1/100th of a second. |
| INT aperTnServOperConnsType | 1.3.6.1.4.1.543.3.1.3.2.3.1.4 | INTEGER | read-only | This variable identifies the socket as either a telnet 3270 or telnet 5250 session. |
| TIK aperTnServOperConnsUpTime | 1.3.6.1.4.1.543.3.1.3.2.3.1.9 | TimeTicks | read-only | How long this telnet connection has existed. |
| STR aperTnServOperConnsUserName | 1.3.6.1.4.1.543.3.1.3.2.3.1.13 | DisplayString | read-only | The name of the Telnet User Connection Profile identified by the client when a telnet session was requested. This name is undefined if the session was named via destination, i.e. LU name or SymbolicDestination. |
| aperTnServOperGen | 1.3.6.1.4.1.543.3.1.3.1 | |||
| INT aperTnServOperStatus | 1.3.6.1.4.1.543.3.1.3.1.1 | INTEGER | read-only | Status of the TNSERVER. Currently this value is read-only. When sets are supported, this variable will be used to change the state of the server. |
| TIK aperTnServOperUpTime | 1.3.6.1.4.1.543.3.1.3.1.3 | TimeTicks | read-only | This value represents the time elapsed since the server was started in units of 1/100th of a second. |
| aperTnServRtm | 1.3.6.1.4.1.543.3.1.4.1 | |||
| STR aperTnServRtmAlsName | 1.3.6.1.4.1.543.3.1.4.1.21.1.1 | DisplayString | read-only | The name of the link station. |
| INT aperTnServRtmAvgRspTime | 1.3.6.1.4.1.543.3.1.4.1.21.1.32 | INTEGER | read-only | This value indicates the average response time for all transactions in units of 1/10th of a second. |
| INT aperTnServRtmAvgSnaRspTime | 1.3.6.1.4.1.543.3.1.4.1.21.1.36 | INTEGER | read-only | The SNA component of the average response time for all transactions in units of 1/10th of a second. |
| INT aperTnServRtmAvgTcpIpRspTime | 1.3.6.1.4.1.543.3.1.4.1.21.1.39 | INTEGER | read-only | The TCP/IP component of the average response time for all transactions in units of 1/10th of a second. |
| INT aperTnServRtmAvgThinkTime | 1.3.6.1.4.1.543.3.1.4.1.21.1.41 | INTEGER | read-only | The average time *between* transactions, in units of 1/10th of a second, during which the user was thinking. |
| INT aperTnServRtmBoundary1 | 1.3.6.1.4.1.543.3.1.4.1.21.1.13 | INTEGER | read-write | This object contains the value of the first boundary in units of 1/10th of a second. Setting this value also causes counters for this LU to be reset. The value written to this variable is not committed until aperTnServRtmNumberOfBoundaries is written, at which time all Boundary values are validated and confirmed to be in strictly increasing order. |
| INT aperTnServRtmBoundary2 | 1.3.6.1.4.1.543.3.1.4.1.21.1.14 | INTEGER | read-write | This object contains the value of the second boundary in units of 1/10th of a second. Setting this value also causes counters for this LU to be reset. The value written to this variable is not committed until aperTnServRtmNumberOfBoundaries is written, at which time all Boundary values are validated and confirmed to be in strictly increasing order. |
| INT aperTnServRtmBoundary3 | 1.3.6.1.4.1.543.3.1.4.1.21.1.15 | INTEGER | read-write | This object contains the value of the third boundary in units of 1/10th of a second. Setting this value also causes counters for this LU to be reset. The value written to this variable is not committed until aperTnServRtmNumberOfBoundaries is written, at which time all Boundary values are validated and confirmed to be in strictly increasing order. |
| INT aperTnServRtmBoundary4 | 1.3.6.1.4.1.543.3.1.4.1.21.1.16 | INTEGER | read-write | This object contains the value of the fourth boundary in units of 1/10th of a second. Setting this value also causes counters for this LU to be reset. The value written to this variable is not committed until aperTnServRtmNumberOfBoundaries is written, at which time all Boundary values are validated and confirmed to be in strictly increasing order. |
| IP aperTnServRtmClientIP | 1.3.6.1.4.1.543.3.1.4.1.21.1.3 | IpAddress | read-only | The IP address of the telnet client. |
| INT aperTnServRtmClientPort | 1.3.6.1.4.1.543.3.1.4.1.21.1.4 | INTEGER | read-only | The TCP port number of the telnet client. |
| CTR aperTnServRtmCounter1 | 1.3.6.1.4.1.543.3.1.4.1.21.1.17 | Counter | read-only | This value indicates the number of transactions which fall in the range specified by the first boundary. When aperTnServRtmNumTrans is set to zero, this counter is reset. |
| CTR aperTnServRtmCounter2 | 1.3.6.1.4.1.543.3.1.4.1.21.1.18 | Counter | read-only | This value indicates the number of transactions which fall in the range specified by the second boundary. When aperTnServRtmNumTrans is set to zero, this counter is reset. |
| CTR aperTnServRtmCounter3 | 1.3.6.1.4.1.543.3.1.4.1.21.1.19 | Counter | read-only | This value indicates the number of transactions which fall in the range specified by the third boundary. When aperTnServRtmNumTrans is set to zero, this counter is reset. |
| CTR aperTnServRtmCounter4 | 1.3.6.1.4.1.543.3.1.4.1.21.1.20 | Counter | read-only | This value indicates the number of transactions which fall in the range specified by the fourth boundary. When aperTnServRtmNumTrans is set to zero, this counter is reset. |
| INT aperTnServRtmCounterOverflowed | 1.3.6.1.4.1.543.3.1.4.1.21.1.24 | INTEGER | read-only | This value indicates whether any of the five transaction counters have reached their maximum value. This variable can be reset by setting aperTnServRtmNumTrans to zero. |
| INT aperTnServRtmCounterOverflowHostAlert | 1.3.6.1.4.1.543.3.1.4.1.21.1.26 | INTEGER | read-only | The setting determines if an unsolicited host alert is generated when a transaction counter overflows. |
| INT aperTnServRtmCounterOverflowTriggerState | 1.3.6.1.4.1.543.3.1.4.1.21.1.25 | INTEGER | read-write | If this value is on(1), then whenever a transaction counter overflows, a counter overflow trap is generated to the management station.. |
| INT aperTnServRtmDef | 1.3.6.1.4.1.543.3.1.4.1.21.1.8 | INTEGER | read-write | The value indicates the mode of measurement for this RTM request. The values have following meaning: firstChar(1) - time to first character on screen kb(2) - time to keyboard usable by operator cdeb(3) - time to Change Direction/End Bracket. |
| INT aperTnServRtmDefaultBoundary1 | 1.3.6.1.4.1.543.3.1.4.1.10 | INTEGER | read-write | The initial value of the first boundary in units of 1/10th of a second for newly created entries in the RtmTable. The value written to this variable is not committed until aperTnServRtmDefaultNumberOfBoundaries is written, at which time all DefaultBoundary values are validated and confirmed to be in strictly increasing order. |
| INT aperTnServRtmDefaultBoundary2 | 1.3.6.1.4.1.543.3.1.4.1.11 | INTEGER | read-write | The initial value of the second boundary in units of 1/10th of a second for newly created entries in the RtmTable. The value written to this variable is not committed until aperTnServRtmDefaultNumberOfBoundaries is written, at which time all DefaultBoundary values are validated and confirmed to be in strictly increasing order. |
| INT aperTnServRtmDefaultBoundary3 | 1.3.6.1.4.1.543.3.1.4.1.12 | INTEGER | read-write | The initial value of the third boundary in units of 1/10th of a second for newly created entries in the RtmTable. The value written to this variable is not committed until aperTnServRtmDefaultNumberOfBoundaries is written, at which time all DefaultBoundary values are validated and confirmed to be in strictly increasing order. |
| INT aperTnServRtmDefaultBoundary4 | 1.3.6.1.4.1.543.3.1.4.1.13 | INTEGER | read-write | The initial value of the fourth boundary in units of 1/10th of a second for newly created entries in the RtmTable. The value written to this variable is not committed until aperTnServRtmDefaultNumberOfBoundaries is written, at which time all DefaultBoundary values are validated and confirmed to be in strictly increasing order. |
| INT aperTnServRtmDefaultControl | 1.3.6.1.4.1.543.3.1.4.1.3 | INTEGER | read-write | This is the initial value of the control when an ALS is activated, which determines whether the host or the tnserver controls write access to the values in the RtmTable. If controlled by host, the ability to clear the counters and change the boundary values is set by the HOST. If locally controlled, requests from the host to control the RTM state and parameters are rejected by the tnserver. If this value is changed while an ALS is active, the ALS will need to be stopped and then restarted for the new value to take effect for that ALS. |
| INT aperTnServRtmDefaultCounterOverflowHostAlert | 1.3.6.1.4.1.543.3.1.4.1.17 | INTEGER | read-write | The default setting that will determine if an unsolicited host alert is generated when a transaction counter overflows. |
| INT aperTnServRtmDefaultCounterOverflowTriggerState | 1.3.6.1.4.1.543.3.1.4.1.16 | INTEGER | read-write | The default setting that will determine if a transaction counter overflow SNMP trap is enabled when an entry in the RTM table is created. |
| INT aperTnServRtmDefaultDef | 1.3.6.1.4.1.543.3.1.4.1.5 | INTEGER | read-write | This is the initial value of the the mode of measurement for RTM requests. The values have following meaning: firstChar(1) - time to first character on screen kb(2) - time to keyboard usable by operator cdeb(3) - time to Change Direction/End Bracket. |
| INT aperTnServRtmDefaultLocalDisplay | 1.3.6.1.4.1.543.3.1.4.1.4 | INTEGER | read-write | This value indicates whether RTM statistics can be displayed locally. If local display is supported, the Telnet Server is allowed to display RTM statistics in the 3270 session status screen. |
| INT aperTnServRtmDefaultMeasureSnaTime | 1.3.6.1.4.1.543.3.1.4.1.7 | INTEGER | read-write | The initial value of whether the transaction measurement of newly created entries in the RtmTable should include SNA timings. |
| INT aperTnServRtmDefaultMeasureTcpIpTime | 1.3.6.1.4.1.543.3.1.4.1.6 | INTEGER | read-write | The initial value of whether the transaction measurement of newly created entries in the RtmTable should include TCP/IP timings. |
| INT aperTnServRtmDefaultNumberOfBoundaries | 1.3.6.1.4.1.543.3.1.4.1.9 | INTEGER | read-write | The initial value of the number of RTM boundaries utilized for newly created entries in the RtmTable. At least one RTM boundary must be specified so the range of this variable is 1-4. Writing this value causes the default boundary values to be validated and committed. If the values previously written for aperTnServRtmDefaultBoundary1, etc. are found to be incompatible with each other, no commit is done, and the buffered(ie. previously written) values are dropped. |
| INT aperTnServRtmDefaultSamplingFactor | 1.3.6.1.4.1.543.3.1.4.1.8 | INTEGER | read-write | The initial value of fraction of transactions that should be timed when a new entry is created in the RtmTable. To avoid LAN congestion when TCP/IP timings are included, this value allows the management station to control the number of transactions timed. 1 means every transaction, 2 means every other transaction, 3 means every third transaction, etc. |
| INT aperTnServRtmDefaultState | 1.3.6.1.4.1.543.3.1.4.1.2 | INTEGER | read-write | This value indicates whether RTM is initially on or off when a row in the RtmTable is created. |
| INT aperTnServRtmDefaultThresholdTrigger | 1.3.6.1.4.1.543.3.1.4.1.14 | INTEGER | read-write | The default transaction time, in units of 1/10th of a second, which will cause a SNMP trap indicating excessive response time to the manager if the average transaction time exceeds this value. |
| INT aperTnServRtmDefaultThresholdTriggerState | 1.3.6.1.4.1.543.3.1.4.1.15 | INTEGER | read-write | The default setting that will determine if the excessive transaction time SNMP trap is enabled when an entry in the RTM table is created. |
| INT aperTnServRtmDefaultUnbindHostAlert | 1.3.6.1.4.1.543.3.1.4.1.19 | INTEGER | read-write | The default setting that will determine if an unsolicited host alert is generated when an unbind is received. |
| INT aperTnServRtmDefaultUnbindTriggerState | 1.3.6.1.4.1.543.3.1.4.1.18 | INTEGER | read-write | The default setting that will determine whether the RTM unbind SNMP trap will be enabled when an entry in the RTM table is created. |
| aperTnServRtmEntry | 1.3.6.1.4.1.543.3.1.4.1.21.1 | not-accessible | This table contains RTM information. | |
| STR aperTnServRtmHistAlsName | 1.3.6.1.4.1.543.3.1.4.1.25.1.3 | DisplayString | read-only | The name of the SNA adjacent link station on which the session occurred. |
| INT aperTnServRtmHistAvgRspTime | 1.3.6.1.4.1.543.3.1.4.1.25.1.27 | INTEGER | read-only | This value indicates the average response time for all transactions in units of 1/10th of a second. |
| INT aperTnServRtmHistAvgSnaRspTime | 1.3.6.1.4.1.543.3.1.4.1.25.1.31 | INTEGER | read-only | The SNA component of the average response time for all transactions in units of 1/10th of a second. |
| INT aperTnServRtmHistAvgTcpIpRspTime | 1.3.6.1.4.1.543.3.1.4.1.25.1.34 | INTEGER | read-only | The TCP/IP component of the average response time for all transactions in units of 1/10th of a second. |
| INT aperTnServRtmHistAvgThinkTime | 1.3.6.1.4.1.543.3.1.4.1.25.1.35 | INTEGER | read-only | The average time *between* transactions, in units of 1/10th of a second, during which the user was thinking. |
| INT aperTnServRtmHistBoundary1 | 1.3.6.1.4.1.543.3.1.4.1.25.1.15 | INTEGER | read-only | This object contains the value of the first boundary in units of 1/10th of a second. |
| INT aperTnServRtmHistBoundary2 | 1.3.6.1.4.1.543.3.1.4.1.25.1.16 | INTEGER | read-only | This object contains the value of the second boundary in units of 1/10th of a second. |
| INT aperTnServRtmHistBoundary3 | 1.3.6.1.4.1.543.3.1.4.1.25.1.17 | INTEGER | read-only | This object contains the value of the third boundary in units of 1/10th of a second. |
| INT aperTnServRtmHistBoundary4 | 1.3.6.1.4.1.543.3.1.4.1.25.1.18 | INTEGER | read-only | This object contains the value of the fourth boundary in units of 1/10th of a second. |
| IP aperTnServRtmHistClientIP | 1.3.6.1.4.1.543.3.1.4.1.25.1.5 | IpAddress | read-only | The IP address of the telnet client for the session that has ended. |
| INT aperTnServRtmHistClientPort | 1.3.6.1.4.1.543.3.1.4.1.25.1.6 | INTEGER | read-only | The TCP port of the telnet client for the session that has ended. |
| CTR aperTnServRtmHistCounter1 | 1.3.6.1.4.1.543.3.1.4.1.25.1.19 | Counter | read-only | This value indicates the number of transactions which fall in the range specified by the first boundary. |
| CTR aperTnServRtmHistCounter2 | 1.3.6.1.4.1.543.3.1.4.1.25.1.20 | Counter | read-only | This value indicates the number of transactions which fall in the range specified by the second boundary. |
| CTR aperTnServRtmHistCounter3 | 1.3.6.1.4.1.543.3.1.4.1.25.1.21 | Counter | read-only | This value indicates the number of transactions which fall in the range specified by the third boundary. |
| CTR aperTnServRtmHistCounter4 | 1.3.6.1.4.1.543.3.1.4.1.25.1.22 | Counter | read-only | This value indicates the number of transactions which fall in the range specified by the fourth boundary. |
| INT aperTnServRtmHistCounterOverflowed | 1.3.6.1.4.1.543.3.1.4.1.25.1.24 | INTEGER | read-only | This value indicates whether any of the five transaction counters has overflowed. |
| INT aperTnServRtmHistDef | 1.3.6.1.4.1.543.3.1.4.1.25.1.10 | INTEGER | read-only | The value indicates the mode of measurement for the session that ended. The values have following meaning: firstChar(1) - time to first character on screen kb(2) - time to keyboard usable by operator cdeb(3) - time to Change Direction/End Bracket. |
| STR aperTnServRtmHistDeviceName | 1.3.6.1.4.1.543.3.1.4.1.25.1.7 | DisplayString | read-only | The Telnet device name, if known, assigned to the telnet session that has ended. |
| aperTnServRtmHistEntry | 1.3.6.1.4.1.543.3.1.4.1.25.1 | not-accessible | This table contains RTM historical information. | |
| INT aperTnServRtmHistIndex | 1.3.6.1.4.1.543.3.1.4.1.25.1.1 | INTEGER | read-only | This value is used as an index in get-next operations to allow retrieval of the RTM History Table from most recent to oldest entry. The value of this variable is (the_maximum_value_of_TimeTicks minus the value of aperTnServRtmHistWhenDisconnected. |
| INT aperTnServRtmHistLuNumber | 1.3.6.1.4.1.543.3.1.4.1.25.1.4 | INTEGER | read-only | The number of the SNA LU on which the session occurred. |
| INT aperTnServRtmHistMaxRspTime | 1.3.6.1.4.1.543.3.1.4.1.25.1.29 | INTEGER | read-only | The maximum response time in units of 1/10th of a second. |
| INT aperTnServRtmHistMeasureSnaTime | 1.3.6.1.4.1.543.3.1.4.1.25.1.12 | INTEGER | read-only | Did transaction measurement include SNA timings? |
| INT aperTnServRtmHistMeasureTcpIpTime | 1.3.6.1.4.1.543.3.1.4.1.25.1.11 | INTEGER | read-only | Did transaction measurement include TCP/IP timings? |
| INT aperTnServRtmHistMinRspTime | 1.3.6.1.4.1.543.3.1.4.1.25.1.28 | INTEGER | read-only | The minimum response time in units of 1/10th of a second. |
| INT aperTnServRtmHistNumberOfBoundaries | 1.3.6.1.4.1.543.3.1.4.1.25.1.14 | INTEGER | read-only | The number of RTM boundaries utilized by the LU. |
| INT aperTnServRtmHistNumTcpIpSamples | 1.3.6.1.4.1.543.3.1.4.1.25.1.32 | INTEGER | read-only | The number of transaction for which TCP/IP measurements were supplied. |
| INT aperTnServRtmHistNumTrans | 1.3.6.1.4.1.543.3.1.4.1.25.1.25 | INTEGER | read-only | This value indicates the total number of transactions executed since the RTM monitoring began |
| CTR aperTnServRtmHistOverFlows | 1.3.6.1.4.1.543.3.1.4.1.25.1.23 | Counter | read-only | This value indicates the number of transactions which exceed the highest range specified by the boundaries. |
| INT aperTnServRtmHistSamplingFactor | 1.3.6.1.4.1.543.3.1.4.1.25.1.13 | INTEGER | read-only | The fraction of transactions that should were timed. |
| STR aperTnServRtmHistSessionName | 1.3.6.1.4.1.543.3.1.4.1.25.1.9 | DisplayString | read-only | The name of the session profile, if known, associated with the telnet session that has ended. |
| aperTnServRtmHistTable | 1.3.6.1.4.1.543.3.1.4.1.25 | not-accessible | SNA RTM information for 3270 display LU's. | |
| INT aperTnServRtmHistTotalRspTime | 1.3.6.1.4.1.543.3.1.4.1.25.1.26 | INTEGER | read-only | This value indicates the sum of the response times for all transactions, in units of 1/10th of a second. |
| INT aperTnServRtmHistTotalSnaRspTime | 1.3.6.1.4.1.543.3.1.4.1.25.1.30 | INTEGER | read-only | The SNA component of sum of the response times for all transactions in units of 1/10th of a second. |
| INT aperTnServRtmHistTotalTcpIpRspTime | 1.3.6.1.4.1.543.3.1.4.1.25.1.33 | INTEGER | read-only | The TCP/IP component of sum of the response times for all transactions in units of 1/10th of a second. |
| STR aperTnServRtmHistUserName | 1.3.6.1.4.1.543.3.1.4.1.25.1.8 | DisplayString | read-only | The name of the user profile, if known, associated with the telnet session that has ended. |
| TIK aperTnServRtmHistWhenDisconnected | 1.3.6.1.4.1.543.3.1.4.1.25.1.2 | TimeTicks | read-only | A timestamp, in units of 1/100th of a second, when the Telnet session being timed was terminated. |
| TIK aperTnServRtmLastHist | 1.3.6.1.4.1.543.3.1.4.1.24 | TimeTicks | read-only | The time when the latest entry was created in the Rtm History Table |
| INT aperTnServRtmLastRspTime | 1.3.6.1.4.1.543.3.1.4.1.21.1.31 | INTEGER | read-only | This value indicates the response time for the last transaction in units of 1/10th of a second. |
| INT aperTnServRtmLastThinkTime | 1.3.6.1.4.1.543.3.1.4.1.21.1.40 | INTEGER | read-only | The time between the end of the penultimate transaction and the beginning of the last transaction, in units of 1/10th of a second. This gives an indication of how long the user took to think about the transaction before executing it. |
| INT aperTnServRtmLocalDisplay | 1.3.6.1.4.1.543.3.1.4.1.21.1.6 | INTEGER | read-write | This value indicates whether RTM statistics can be displayed locally at the client's workstation. |
| INT aperTnServRtmLuNumber | 1.3.6.1.4.1.543.3.1.4.1.21.1.2 | INTEGER | read-only | The number of the LU. |
| INT aperTnServRtmMaxHist | 1.3.6.1.4.1.543.3.1.4.1.22 | INTEGER | read-write | The maximum number of history entries in the Rtm History Table |
| INT aperTnServRtmMaxRspTime | 1.3.6.1.4.1.543.3.1.4.1.21.1.34 | INTEGER | read-only | The maximum response time in units of 1/10th of a second. |
| INT aperTnServRtmMeasureSnaTime | 1.3.6.1.4.1.543.3.1.4.1.21.1.10 | INTEGER | read-write | Should transaction measurement include SNA timings? |
| INT aperTnServRtmMeasureTcpIpTime | 1.3.6.1.4.1.543.3.1.4.1.21.1.9 | INTEGER | read-write | Should transaction measurement include TCP/IP timings? |
| INT aperTnServRtmMinRspTime | 1.3.6.1.4.1.543.3.1.4.1.21.1.33 | INTEGER | read-only | The minimum response time in units of 1/10th of a second. |
| INT aperTnServRtmNumActive | 1.3.6.1.4.1.543.3.1.4.1.20 | INTEGER | read-only | The number of active RTM entries. |
| INT aperTnServRtmNumAls | 1.3.6.1.4.1.543.3.1.4.1.26 | INTEGER | read-only | The number of per Als rows of RTM configuration entries in the RTM ALS table. |
| INT aperTnServRtmNumberOfBoundaries | 1.3.6.1.4.1.543.3.1.4.1.21.1.12 | INTEGER | read-write | The number of RTM boundaries utilized by the LU. At least one RTM boundary must be specified so the range of this variable is 1-4. Writing this variable causes the RtmBoundary values for the LU previously written by the management station to be validated and confirmed to be in strictly increasing order. If validation is successful, the new boundary values are written to the kernel, causing the current RTM counters to be reset. If validation is unsuccessful, the buffered values are dropped and not written to the kernel. |
| INT aperTnServRtmNumHist | 1.3.6.1.4.1.543.3.1.4.1.23 | INTEGER | read-only | The actual number of history entries in the Rtm History Table |
| INT aperTnServRtmNumTcpIpSamples | 1.3.6.1.4.1.543.3.1.4.1.21.1.37 | INTEGER | read-only | The number of transaction for which TCP/IP measurements were supplied. |
| INT aperTnServRtmNumTrans | 1.3.6.1.4.1.543.3.1.4.1.21.1.29 | INTEGER | read-write | This value indicates the total number of transactions monitored. This value can be set to zero only, which will also cause all counters and the counter overflow flag to be reset. |
| CTR aperTnServRtmOverFlows | 1.3.6.1.4.1.543.3.1.4.1.21.1.21 | Counter | read-only | This value indicates the number of transactions which exceed the highest range specified by the boundaries. When aperTnServRtmNumTrans is set to zero, this counter is reset. |
| INT aperTnServRtmPerAlsBoundary1 | 1.3.6.1.4.1.543.3.1.4.1.27.1.9 | INTEGER | write-only | This object contains the value of the first boundary for all LU's on a given ALS in units of 1/10th of a second. This variable can be set by the management station only when aperTnServRtmPerAlsControl for the specified ALS is local(2). Setting this value also causes counters for all LU's on this ALS to be reset. The value written to this variable is not committed until aperTnServRtmPerAlsNumberOfBoundaries is written, at which time all RtmPerAlsBoundary values are validated and confirmed to be in strictly increasing order. |
| INT aperTnServRtmPerAlsBoundary2 | 1.3.6.1.4.1.543.3.1.4.1.27.1.10 | INTEGER | write-only | This object contains the value of the second boundary for all LU's on a given ALS in units of 1/10th of a second. This variable can be set by the management station only when aperTnServRtmPerAlsControl for the specified ALS is local(2). Setting this value also causes counters for all LU's on this ALS to be reset. The value written to this variable is not committed until aperTnServRtmPerAlsNumberOfBoundaries is written, at which time all RtmPerAlsBoundary values are validated and confirmed to be in strictly increasing order. |
| INT aperTnServRtmPerAlsBoundary3 | 1.3.6.1.4.1.543.3.1.4.1.27.1.11 | INTEGER | write-only | This object contains the value of the third boundary for all LU's on a given ALS in units of 1/10th of a second. This variable can be set by the management station only when aperTnServRtmPerAlsControl for the specified ALS is local(2). Setting this value also causes counters for all LU's on this ALS to be reset. The value written to this variable is not committed until aperTnServRtmPerAlsNumberOfBoundaries is written, at which time all RtmPerAlsBoundary values are validated and confirmed to be in strictly increasing order. |
| INT aperTnServRtmPerAlsBoundary4 | 1.3.6.1.4.1.543.3.1.4.1.27.1.12 | INTEGER | write-only | This object contains the value of the fourth boundary for all LU's on a given ALS in units of 1/10th of a second. This variable can be set by the management station only when aperTnServRtmPerAlsControl for the specified ALS is local(2). Setting this value also causes counters for all LU's on this ALS to be reset. The value written to this variable is not committed until aperTnServRtmPerAlsNumberOfBoundaries is written, at which time all RtmPerAlsBoundary values are validated and confirmed to be in strictly increasing order. |
| INT aperTnServRtmPerAlsControl | 1.3.6.1.4.1.543.3.1.4.1.27.1.2 | INTEGER | read-only | This is the value of the control for the specified ALS which determines whether the host or the tnserver controls write access to the values in the RtmTable for entries with the same ALS name. If controlled by host, the ability to clear the counters and change the boundary values is set by the HOST. If locally controlled, requests from the host to control the RTM state and parameters are rejected by the tnserver. |
| INT aperTnServRtmPerAlsCounterOverflowTriggerState | 1.3.6.1.4.1.543.3.1.4.1.27.1.16 | INTEGER | write-only | If this value is on(1), then whenever a transaction counter overflows, a counter overflow trap is generated to the management station.. |
| INT aperTnServRtmPerAlsDef | 1.3.6.1.4.1.543.3.1.4.1.27.1.4 | INTEGER | write-only | The variable is used to change the definition of transactions for all LU's on a given ALS. The values have following meaning: firstChar(1) - time to first character on screen kb(2) - time to keyboard usable by operator cdeb(3) - time to Change Direction/End Bracket. This variable can be set by the management station only when aperTnServRtmPerAlsControl for the specified ALS is local(2). |
| aperTnServRtmPerAlsEntry | 1.3.6.1.4.1.543.3.1.4.1.27.1 | not-accessible | This table is used to change RTM operational parameters. | |
| INT aperTnServRtmPerAlsMeasureSnaTime | 1.3.6.1.4.1.543.3.1.4.1.27.1.6 | INTEGER | write-only | Should transaction measurement include SNA timings for all LU's on a given ALS? |
| INT aperTnServRtmPerAlsMeasureTcpIpTime | 1.3.6.1.4.1.543.3.1.4.1.27.1.5 | INTEGER | write-only | Should transaction measurement include TCP/IP timings for all LU's on a given ALS? |
| STR aperTnServRtmPerAlsName | 1.3.6.1.4.1.543.3.1.4.1.27.1.1 | DisplayString | read-only | The name of the link station. |
| INT aperTnServRtmPerAlsNumberOfBoundaries | 1.3.6.1.4.1.543.3.1.4.1.27.1.8 | INTEGER | write-only | The number of RTM boundaries utilized by all the LUs under the ALS. At least one RTM boundary must be specified so the range of this variable is 1-4. Writing this variable causes the previously written values for aperTnServRtmPerAlsBoundary1 etc. to be validated and confirmed to be in increasing order. If the validation is successful, the new boundary values are propagated to the LUs under the ALS. Setting the new boundaries causes counters for all the LUs to be reset. If the validation fails, the buffered(ie. previously- written) values are dropped. The values specified for the LUs on an ALS might subsequently be changed on a per-LU basis. |
| INT aperTnServRtmPerAlsResetCounters | 1.3.6.1.4.1.543.3.1.4.1.27.1.13 | INTEGER | write-only | Setting this value to yes(1) will cause all transaction counters for all LU's on the specified ALS to zero. This variable can be set by the management station only when aperTnServRtmPerAlsControl for the specified ALS is local(2). |
| INT aperTnServRtmPerAlsSamplingFactor | 1.3.6.1.4.1.543.3.1.4.1.27.1.7 | INTEGER | write-only | The fraction of transactions that should be timed. To avoid LAN congestion when TCP/IP timings are included, this value allows the management station to control the number of transactions timed. 1 means every transaction, 2 means every other transaction, 3 means every third transaction, etc. |
| INT aperTnServRtmPerAlsState | 1.3.6.1.4.1.543.3.1.4.1.27.1.3 | INTEGER | write-only | The variable is used to turn on or off for all LU's on a given ALS. This variable can be set by the management station only when aperTnServRtmPerAlsControl for the specified ALS is local(2). |
| aperTnServRtmPerAlsTable | 1.3.6.1.4.1.543.3.1.4.1.27 | not-accessible | SNA RTM information for 3270 display LU's. This table is used to alter certain RTM operational parameters for all LU's on a particular ALS. Except for the index (the ALS name) and the RTM ALS control, all columns in rows of this table can be written only. | |
| INT aperTnServRtmPerAlsThresholdTrigger | 1.3.6.1.4.1.543.3.1.4.1.27.1.14 | INTEGER | write-only | This value indicates the threshold of average response time. If the transaction time being monitored exceeds this value and aperTnServRtmPerAlsThresholdTriggerState is on(1), then an excessive response time trap will be generated to the manager. Once a trap has been generated, the trigger is disabled and must be re-enabled by the SNMP management station. |
| INT aperTnServRtmPerAlsThresholdTriggerState | 1.3.6.1.4.1.543.3.1.4.1.27.1.15 | INTEGER | write-only | If this value is on(1), then whenever the average response for this LU exceeds aperTnServRtmPerAlsThresholdTrigger, then an excessive response time trap will be generated to the manage. This causes the state to become off(2). The management station must reset this trigger in order to rearm this trap. |
| INT aperTnServRtmPerAlsUnbindTriggerState | 1.3.6.1.4.1.543.3.1.4.1.27.1.17 | INTEGER | write-only | If this value is on(1), then whenever an unbind on a session with RTM enabled occurs, a session unbound trap is generated to the management station. |
| INT aperTnServRtmSamplingFactor | 1.3.6.1.4.1.543.3.1.4.1.21.1.11 | INTEGER | read-write | The fraction of transactions that should be timed. To avoid LAN congestion when TCP/IP timings are included, this value allows the management station to control the number of transactions timed. 1 means every transaction, 2 means every other transaction, 3 means every third transaction, etc. |
| INT aperTnServRtmState | 1.3.6.1.4.1.543.3.1.4.1.21.1.5 | INTEGER | read-write | The value indicates RTM is enabled or disabled for a particular LU. |
| INT aperTnServRtmSupport | 1.3.6.1.4.1.543.3.1.4.1.1 | INTEGER | read-only | This value indicates whether RTM is supported or not. If this value is off, all the following RTM values are not visible to an snmp manager. |
| aperTnServRtmTable | 1.3.6.1.4.1.543.3.1.4.1.21 | not-accessible | SNA RTM information for 3270 display LU's. | |
| INT aperTnServRtmThresholdTrigger | 1.3.6.1.4.1.543.3.1.4.1.21.1.22 | INTEGER | read-write | This value indicates the threshold of average response time. If the transaction time being monitored exceeds this value and aperTnServRtmThresholdTriggerState is on(1), then an excessive response time trap will be generated to the manager. Once a trap has been generated, the trigger is disabled and must be re-enabled by the SNMP management station. |
| INT aperTnServRtmThresholdTriggerState | 1.3.6.1.4.1.543.3.1.4.1.21.1.23 | INTEGER | read-write | If this value is on(1), then whenever the average response for this LU exceeds aperTnServRtmThresholdTrigger, then an excessive response time trap will be generated to the manage. This causes the state to become off(2). The management station must reset this trigger in order to rearm this trap. |
| INT aperTnServRtmTotalRspTime | 1.3.6.1.4.1.543.3.1.4.1.21.1.30 | INTEGER | read-only | This value indicates the sum of the response times for all transactions, in units of 1/10th of a second. |
| INT aperTnServRtmTotalSnaRspTime | 1.3.6.1.4.1.543.3.1.4.1.21.1.35 | INTEGER | read-only | The SNA component of sum of the response times for all transactions in units of 1/10th of a second. |
| INT aperTnServRtmTotalTcpIpRspTime | 1.3.6.1.4.1.543.3.1.4.1.21.1.38 | INTEGER | read-only | The TCP/IP component of sum of the response times for all transactions in units of 1/10th of a second. |
| INT aperTnServRtmUnbindHostAlert | 1.3.6.1.4.1.543.3.1.4.1.21.1.28 | INTEGER | read-only | The setting determines if an unsolicited host alert is generated when an unbind is received. |
| INT aperTnServRtmUnbindTriggerState | 1.3.6.1.4.1.543.3.1.4.1.21.1.27 | INTEGER | read-write | If this value is on(1), then whenever an unbind on a session with RTM enabled occurs, a session unbound trap is generated to the management station. |
| TIK aperTnServRtmUpTime | 1.3.6.1.4.1.543.3.1.4.1.21.1.7 | TimeTicks | read-only | This value represents the time elapsed since the RTM state was changed from off to on for this LU in units of 1/100th of a second. If the state of RTM is off, the value of this variable will be zero. |
| aperTnServStats | 1.3.6.1.4.1.543.3.1.4 | |||
| aperTnServTraps | 1.3.6.1.4.1.543.3.1.5 | |||
| NTF aperTnServTrapsRtmCounterOverflow | 1.3.6.1.4.1.543.3.1.5.0.2 | This trap indicates that a transaction counter has exceeded its maximum value. The variables included is a row in the RtmTable. Once this trap has occur, if RTM is host controlled and HOST Alert on Overflow is enabled, the counters will be automatically reset. Otherwise, the counters must be reset by the management station. | ||
| NTF aperTnServTrapsRtmExcessiveTransaction | 1.3.6.1.4.1.543.3.1.5.0.1 | This trap indicates that the average transaction time of the specified LU has exceeded that specified as the trigger value of this trap. | ||
| NTF aperTnServTrapsRtmSessionUnbound | 1.3.6.1.4.1.543.3.1.5.0.3 | This trap indicates that a LU which has transaction timing active has been unbound. The variables included is a row in the RtmTable. Once this trap has occur, if RTM is host controlled and HOST Alert on Session Unbind is enabled, the counters will be automatically reset. Otherwise, the counters must be reset by the management station. | ||
| NTF aperTnServTrapsUserDisabled | 1.3.6.1.4.1.543.3.1.5.0.4 | This trap indicates that a user profile has been disabled by the TNSERVER because of an attempt to connect to a Telnet User Connection Name, but supplying an invalid password several times consecutively without specifying the correct password. The number of consecutive attempts allowed is a configurable MIB variable. | ||
| apertus | 1.3.6.1.4.1.543 | |||
| express | 1.3.6.1.4.1.543.3 |
RFC description
Manages Telnet server routing, security profiles, and session configuration for 3270/5250 connectivity.
Start monitoring Apertus Technologies translation/naming server appliance (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.