ANDOVER-CONTROLS-MIB

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › ANDOVER-CONTROLS-MIB

Organization: Andover Controls Corporation

Last Updated: 2002-10-30

Category: Device Management

Description: Andover Controls building automation and HVAC BACnet controller device management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ANDOVER-CONTROLS-MIB?

ANDOVER-CONTROLS-MIB is the top-level enterprise MIB for Andover Controls, a building automation and BACnet-based HVAC/access-control systems vendor now part of Schneider Electric, serving as the root registration point for the company's SNMP object tree. Because it sits at the top of the enterprise branch it primarily establishes the OID namespace rather than exposing runtime data objects directly, with actual monitored data such as HVAC setpoints, controller status, and alarms defined in subordinate Andover/BACnet MIBs beneath it. Where instrumented, MIBs under this branch are used to monitor building-automation controller status and health, such as HVAC controller operational state and BACnet device communication status. Andover Controls' management approach is built on BACnet, the standard building-automation protocol, so this MIB tree is closely tied to BACnet device and object conventions. It is typically deployed in commercial building management systems monitoring HVAC, lighting, and access-control controllers over a BACnet/IP or BACnet/Ethernet network, where ANDOVER-CONTROLS-MIB SNMP monitoring anchors the OID namespace used by subordinate controller MIBs.

IPNetwork Monitor allows you to monitor SNMP objects defined in ANDOVER-CONTROLS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • Andover Controls building automation controllers (BACnet-based HVAC/access-control systems)

Monitoring Examples

No object or table names were included in the sample for this module, and as a top-level enterprise registration MIB it likely defines little more than the OID root for Andover's product tree; concrete monitorable objects such as BACnet controller status would be defined in subordinate MIBs beneath this branch rather than in this module itself.

Imported Objects

From RFC1155-SMI

enterprises

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
OIDs

RFC description

Building automation alarm, common, and product-specific management objects.

Start monitoring Andover Controls (Schneider Electric) building automation controllers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ANDOVER-CONTROLS-MIB