A3COM-HUAWEI-MLSR-SYSTEM-MIB

All MIBs › A3COM-HUAWEI-MLSR-SYSTEM-MIB

Category: Device Management, Vendor: H3C/HH3C

Description: Provides system-level management for H3C/3Com Multi-Layer Switch Routers (MLSR), covering chassis, software version, and hardware inventory information.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is A3COM-HUAWEI-MLSR-SYSTEM-MIB?

A3COM-HUAWEI-MLSR-SYSTEM-MIB is an H3C/Huawei-3Com proprietary system-level MIB that exposes the running software version alongside a configurable syslog-host table (host address, port, minimum severity, and log language) for the device's logging subsystem. As a software/configuration MIB it lets an administrator confirm the installed firmware version and verify which remote syslog collectors are configured to receive device log messages. It is deployed on H3C (Huawei-3Com) switches and routers as part of the base management MIB set underlying the vendor's other private MIBs. Engineers can download the A3COM-HUAWEI-MLSR-SYSTEM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in A3COM-HUAWEI-MLSR-SYSTEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C (Huawei-3Com) switches and routers

Monitoring Examples

An administrator polls the version object after a firmware upgrade to confirm the new image is running, then checks loghostTable to verify the correct syslog server IP and severity threshold are configured.

What Can Be Monitored

running software version
configured syslog host address/port/severity

Imported Objects

From A3COM-HUAWEI-OID-MIB

mlsr	OBJECT-IDENTITY
router	OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Gauge
IpAddress
TimeTicks

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
attr	1.3.6.1.4.1.43.45.1.2.2.1.1
basis	1.3.6.1.4.1.43.45.1.2.2.1.1.1
huaweiMemoryMan	1.3.6.1.4.1.43.45.1.2.2.5
huaweiMixinfo	1.3.6.1.4.1.43.45.1.2.2.4
INT hwBuffer1024CollectCounts	1.3.6.1.4.1.43.45.1.2.2.5.51	INTEGER	read-only	Contains the number of Collect 1024 byte buffers.
INT hwBuffer1024DropCounts	1.3.6.1.4.1.43.45.1.2.2.5.48	INTEGER	read-only	Contains the number of Drop 1024 byte buffers.
INT hwBuffer1024Free	1.3.6.1.4.1.43.45.1.2.2.5.46	INTEGER	read-only	Contains the number of free 1024 byte buffers.
INT hwBuffer1024FreeError2	1.3.6.1.4.1.43.45.1.2.2.5.49	INTEGER	read-only	Contains the number of Free Error2 1024 byte buffers.
INT hwBuffer1024FreeError3	1.3.6.1.4.1.43.45.1.2.2.5.50	INTEGER	read-only	Contains the number of Free Error3 1024 byte buffers.
INT hwBuffer1024Size	1.3.6.1.4.1.43.45.1.2.2.5.44	INTEGER	read-only	Contains the size of 1024 byte buffers.
INT hwBuffer1024Total	1.3.6.1.4.1.43.45.1.2.2.5.45	INTEGER	read-only	Contains the total number of 1024 byte buffers.
INT hwBuffer1024Used	1.3.6.1.4.1.43.45.1.2.2.5.47	INTEGER	read-only	Contains the number of used 1024 byte buffers.
INT hwBuffer128CollectCounts	1.3.6.1.4.1.43.45.1.2.2.5.27	INTEGER	read-only	Contains the number of Collect 128 byte buffers.
INT hwBuffer128DropCounts	1.3.6.1.4.1.43.45.1.2.2.5.24	INTEGER	read-only	Contains the number of Drop 128 byte buffers.
INT hwBuffer128Free	1.3.6.1.4.1.43.45.1.2.2.5.22	INTEGER	read-only	Contains the number of free 128 byte buffers.
INT hwBuffer128FreeError2	1.3.6.1.4.1.43.45.1.2.2.5.25	INTEGER	read-only	Contains the number of Free Error2 128 byte buffers.
INT hwBuffer128FreeError3	1.3.6.1.4.1.43.45.1.2.2.5.26	INTEGER	read-only	Contains the number of Free Error3 128 byte buffers.
INT hwBuffer128Size	1.3.6.1.4.1.43.45.1.2.2.5.20	INTEGER	read-only	Contains the size of 128 byte buffers.
INT hwBuffer128Total	1.3.6.1.4.1.43.45.1.2.2.5.21	INTEGER	read-only	Contains the total number of 128 byte buffers.
INT hwBuffer128Used	1.3.6.1.4.1.43.45.1.2.2.5.23	INTEGER	read-only	Contains the number of used 128 byte buffers.
INT hwBuffer2048CollectCounts	1.3.6.1.4.1.43.45.1.2.2.5.59	INTEGER	read-only	Contains the number of Collect 2048 byte buffers.
INT hwBuffer2048DropCounts	1.3.6.1.4.1.43.45.1.2.2.5.56	INTEGER	read-only	Contains the number of Drop 2048 byte buffers.
INT hwBuffer2048Free	1.3.6.1.4.1.43.45.1.2.2.5.54	INTEGER	read-only	Contains the number of free 2048 byte buffers.
INT hwBuffer2048FreeError2	1.3.6.1.4.1.43.45.1.2.2.5.57	INTEGER	read-only	Contains the number of Free Error2 2048 byte buffers.
INT hwBuffer2048FreeError3	1.3.6.1.4.1.43.45.1.2.2.5.58	INTEGER	read-only	Contains the number of Free Error3 2048 byte buffers.
INT hwBuffer2048Size	1.3.6.1.4.1.43.45.1.2.2.5.52	INTEGER	read-only	Contains the size of 2048 byte buffers.
INT hwBuffer2048Total	1.3.6.1.4.1.43.45.1.2.2.5.53	INTEGER	read-only	Contains the total number of 2048 byte buffers.
INT hwBuffer2048Used	1.3.6.1.4.1.43.45.1.2.2.5.55	INTEGER	read-only	Contains the number of used 2048 byte buffers.
INT hwBuffer256CollectCounts	1.3.6.1.4.1.43.45.1.2.2.5.35	INTEGER	read-only	Contains the number of Collect 256 byte buffers.
INT hwBuffer256DropCounts	1.3.6.1.4.1.43.45.1.2.2.5.32	INTEGER	read-only	Contains the number of Drop 256 byte buffers.
INT hwBuffer256Free	1.3.6.1.4.1.43.45.1.2.2.5.30	INTEGER	read-only	Contains the number of free 256 byte buffers.
INT hwBuffer256FreeError2	1.3.6.1.4.1.43.45.1.2.2.5.33	INTEGER	read-only	Contains the number of Free Error2 256 byte buffers.
INT hwBuffer256FreeError3	1.3.6.1.4.1.43.45.1.2.2.5.34	INTEGER	read-only	Contains the number of Free Error3 256 byte buffers.
INT hwBuffer256KCollectCounts	1.3.6.1.4.1.43.45.1.2.2.5.91	INTEGER	read-only	Contains the number of Collect 256K byte buffers.
INT hwBuffer256KDropCounts	1.3.6.1.4.1.43.45.1.2.2.5.88	INTEGER	read-only	Contains the number of Drop 256K byte buffers.
INT hwBuffer256KFree	1.3.6.1.4.1.43.45.1.2.2.5.86	INTEGER	read-only	Contains the number of free 256K byte buffers.
INT hwBuffer256KFreeError2	1.3.6.1.4.1.43.45.1.2.2.5.89	INTEGER	read-only	Contains the number of Free Error2 256K byte buffers.
INT hwBuffer256KFreeError3	1.3.6.1.4.1.43.45.1.2.2.5.90	INTEGER	read-only	Contains the number of Free Error3 256K byte buffers.
INT hwBuffer256KSize	1.3.6.1.4.1.43.45.1.2.2.5.84	INTEGER	read-only	Contains the size of 256K byte buffers.
INT hwBuffer256KTotal	1.3.6.1.4.1.43.45.1.2.2.5.85	INTEGER	read-only	Contains the total number of 256K byte buffers.
INT hwBuffer256KUsed	1.3.6.1.4.1.43.45.1.2.2.5.87	INTEGER	read-only	Contains the number of used 256K byte buffers.
INT hwBuffer256Size	1.3.6.1.4.1.43.45.1.2.2.5.28	INTEGER	read-only	Contains the size of 256 byte buffers.
INT hwBuffer256Total	1.3.6.1.4.1.43.45.1.2.2.5.29	INTEGER	read-only	Contains the total number of 256 byte buffers.
INT hwBuffer256Used	1.3.6.1.4.1.43.45.1.2.2.5.31	INTEGER	read-only	Contains the number of used 256 byte buffers.
INT hwBuffer32CollectCounts	1.3.6.1.4.1.43.45.1.2.2.5.11	INTEGER	read-only	Contains the number of Collect 32 byte buffers.
INT hwBuffer32DropCounts	1.3.6.1.4.1.43.45.1.2.2.5.8	INTEGER	read-only	Contains the number of Drop 32 byte buffers.
INT hwBuffer32Free	1.3.6.1.4.1.43.45.1.2.2.5.6	INTEGER	read-only	Contains the number of free 32 byte buffers.
INT hwBuffer32FreeError2	1.3.6.1.4.1.43.45.1.2.2.5.9	INTEGER	read-only	Contains the number of Free Error2 32 byte buffers.
INT hwBuffer32FreeError3	1.3.6.1.4.1.43.45.1.2.2.5.10	INTEGER	read-only	Contains the number of Free Error3 32 byte buffers.
INT hwBuffer32Size	1.3.6.1.4.1.43.45.1.2.2.5.4	INTEGER	read-only	Contains the size of 32 byte buffers.
INT hwBuffer32Total	1.3.6.1.4.1.43.45.1.2.2.5.5	INTEGER	read-only	Contains the total number of 32 byte buffers.
INT hwBuffer32Used	1.3.6.1.4.1.43.45.1.2.2.5.7	INTEGER	read-only	Contains the number of used 32 byte buffers.
INT hwBuffer4096CollectCounts	1.3.6.1.4.1.43.45.1.2.2.5.67	INTEGER	read-only	Contains the number of Collect 4096 byte buffers.
INT hwBuffer4096DropCounts	1.3.6.1.4.1.43.45.1.2.2.5.64	INTEGER	read-only	Contains the number of Drop 4096 byte buffers.
INT hwBuffer4096Free	1.3.6.1.4.1.43.45.1.2.2.5.62	INTEGER	read-only	Contains the number of free 4096 byte buffers.
INT hwBuffer4096FreeError2	1.3.6.1.4.1.43.45.1.2.2.5.65	INTEGER	read-only	Contains the number of Free Error2 4096 byte buffers.
INT hwBuffer4096FreeError3	1.3.6.1.4.1.43.45.1.2.2.5.66	INTEGER	read-only	Contains the number of Free Error3 4096 byte buffers.
INT hwBuffer4096Size	1.3.6.1.4.1.43.45.1.2.2.5.60	INTEGER	read-only	Contains the size of 4096 byte buffers.
INT hwBuffer4096Total	1.3.6.1.4.1.43.45.1.2.2.5.61	INTEGER	read-only	Contains the total number of 4096 byte buffers.
INT hwBuffer4096Used	1.3.6.1.4.1.43.45.1.2.2.5.63	INTEGER	read-only	Contains the number of used 4096 byte buffers.
INT hwBuffer45KCollectCounts	1.3.6.1.4.1.43.45.1.2.2.5.83	INTEGER	read-only	Contains the number of Collect 45K byte buffers.
INT hwBuffer45KDropCounts	1.3.6.1.4.1.43.45.1.2.2.5.80	INTEGER	read-only	Contains the number of Drop 45K byte buffers.
INT hwBuffer45KFree	1.3.6.1.4.1.43.45.1.2.2.5.78	INTEGER	read-only	Contains the number of free 45K byte buffers.
INT hwBuffer45KFreeError2	1.3.6.1.4.1.43.45.1.2.2.5.81	INTEGER	read-only	Contains the number of Free Error2 45K byte buffers.
INT hwBuffer45KFreeError3	1.3.6.1.4.1.43.45.1.2.2.5.82	INTEGER	read-only	Contains the number of Free Error3 45K byte buffers.
INT hwBuffer45KSize	1.3.6.1.4.1.43.45.1.2.2.5.76	INTEGER	read-only	Contains the size of 45K byte buffers.
INT hwBuffer45KTotal	1.3.6.1.4.1.43.45.1.2.2.5.77	INTEGER	read-only	Contains the total number of 45K byte buffers.
INT hwBuffer45KUsed	1.3.6.1.4.1.43.45.1.2.2.5.79	INTEGER	read-only	Contains the number of used 45K byte buffers.
INT hwBuffer512CollectCounts	1.3.6.1.4.1.43.45.1.2.2.5.43	INTEGER	read-only	Contains the number of Collect 512 byte buffers.
INT hwBuffer512DropCounts	1.3.6.1.4.1.43.45.1.2.2.5.40	INTEGER	read-only	Contains the number of Drop 512 byte buffers.
INT hwBuffer512Free	1.3.6.1.4.1.43.45.1.2.2.5.38	INTEGER	read-only	Contains the number of free 512 byte buffers.
INT hwBuffer512FreeError2	1.3.6.1.4.1.43.45.1.2.2.5.41	INTEGER	read-only	Contains the number of Free Error2 512 byte buffers.
INT hwBuffer512FreeError3	1.3.6.1.4.1.43.45.1.2.2.5.42	INTEGER	read-only	Contains the number of Free Error3 512 byte buffers.
INT hwBuffer512Size	1.3.6.1.4.1.43.45.1.2.2.5.36	INTEGER	read-only	Contains the size of 512 byte buffers.
INT hwBuffer512Total	1.3.6.1.4.1.43.45.1.2.2.5.37	INTEGER	read-only	Contains the total number of 512 byte buffers.
INT hwBuffer512Used	1.3.6.1.4.1.43.45.1.2.2.5.39	INTEGER	read-only	Contains the number of used 512 byte buffers.
INT hwBuffer64CollectCounts	1.3.6.1.4.1.43.45.1.2.2.5.19	INTEGER	read-only	Contains the number of Collect 64 byte buffers.
INT hwBuffer64DropCounts	1.3.6.1.4.1.43.45.1.2.2.5.16	INTEGER	read-only	Contains the number of Drop 64 byte buffers.
INT hwBuffer64Free	1.3.6.1.4.1.43.45.1.2.2.5.14	INTEGER	read-only	Contains the number of free 64 byte buffers.
INT hwBuffer64FreeError2	1.3.6.1.4.1.43.45.1.2.2.5.17	INTEGER	read-only	Contains the number of Free Error2 64 byte buffers.
INT hwBuffer64FreeError3	1.3.6.1.4.1.43.45.1.2.2.5.18	INTEGER	read-only	Contains the number of Free Error3 64 byte buffers.
INT hwBuffer64Size	1.3.6.1.4.1.43.45.1.2.2.5.12	INTEGER	read-only	Contains the size of 64 byte buffers.
INT hwBuffer64Total	1.3.6.1.4.1.43.45.1.2.2.5.13	INTEGER	read-only	Contains the total number of 64 byte buffers.
INT hwBuffer64Used	1.3.6.1.4.1.43.45.1.2.2.5.15	INTEGER	read-only	Contains the number of used 64 byte buffers.
INT hwBuffer8192CollectCounts	1.3.6.1.4.1.43.45.1.2.2.5.75	INTEGER	read-only	Contains the number of Collect 8192 byte buffers.
INT hwBuffer8192DropCounts	1.3.6.1.4.1.43.45.1.2.2.5.72	INTEGER	read-only	Contains the number of Drop 8192 byte buffers.
INT hwBuffer8192Free	1.3.6.1.4.1.43.45.1.2.2.5.70	INTEGER	read-only	Contains the number of free 8192 byte buffers.
INT hwBuffer8192FreeError2	1.3.6.1.4.1.43.45.1.2.2.5.73	INTEGER	read-only	Contains the number of Free Error2 8192 byte buffers.
INT hwBuffer8192FreeError3	1.3.6.1.4.1.43.45.1.2.2.5.74	INTEGER	read-only	Contains the number of Free Error3 8192 byte buffers.
INT hwBuffer8192Size	1.3.6.1.4.1.43.45.1.2.2.5.68	INTEGER	read-only	Contains the size of 8192 byte buffers.
INT hwBuffer8192Total	1.3.6.1.4.1.43.45.1.2.2.5.69	INTEGER	read-only	Contains the total number of 8192 byte buffers.
INT hwBuffer8192Used	1.3.6.1.4.1.43.45.1.2.2.5.71	INTEGER	read-only	Contains the number of used 8192 byte buffers.
INT hwBuzzerStatus	1.3.6.1.4.1.43.45.1.2.2.4.16	INTEGER	read-only	The current status of buzzer. silence(1) indicates the status is silence;tweet(2) indicates the status is tweet.
hwConfigFile	1.3.6.1.4.1.43.45.1.2.2.6
INT hwConfigReg	1.3.6.1.4.1.43.45.1.2.2.4.8	INTEGER	read-only	This variable indicates the system register's value.
INT hwConfigRegNextReboot	1.3.6.1.4.1.43.45.1.2.2.4.9	INTEGER	read-only	This variable indicates the system register's value when next reboot.
INT hwCpuCostRatePer5Minute	1.3.6.1.4.1.43.45.1.2.2.4.13	INTEGER	read-only	The system CPU average busy percentage in the last 5 minutes period.
INT hwCpuCostRatePer5Sec	1.3.6.1.4.1.43.45.1.2.2.4.12	INTEGER	read-only	The system CPU average busy percentage in the last 5 seconds period.
TIK hwCurrentTime	1.3.6.1.4.1.43.45.1.2.2.4.14	TimeTicks	read-only	The current time (in timetick: hundredths of a second)
INT hwFansStatus	1.3.6.1.4.1.43.45.1.2.2.4.17	INTEGER	read-only	The current status of system fan: running(0) indicates the fan is running;stopping(1) indicates the fan is stopping; nofan(2) indicates no fan in the device.
hwFlashMan	1.3.6.1.4.1.43.45.1.2.2.3
HWF hwFlhCurStat	1.3.6.1.4.1.43.45.1.2.2.3.5	HwFlashStatus	read-only	The flash's current status.
HWF hwFlhEraseStat	1.3.6.1.4.1.43.45.1.2.2.3.4	HwFlashEreaseStatus	read-only	The flash ereasing status.
TIK hwFlhEraseTime	1.3.6.1.4.1.43.45.1.2.2.3.3	TimeTicks	read-only	The last time of the flash device ereased. The value of the object is the time of sysUpTime.
INT hwFlhTotalSize	1.3.6.1.4.1.43.45.1.2.2.3.1	INTEGER	read-only	Total size of the Flash device.
INT hwFlhUnusedSize	1.3.6.1.4.1.43.45.1.2.2.3.2	INTEGER	read-only	Free space within a Flash.
GAU hwFreeMemory	1.3.6.1.4.1.43.45.1.2.2.5.2	Gauge	read-only	The free size of the memory. The unit is Byte
STR hwHostConfigName	1.3.6.1.4.1.43.45.1.2.2.6.5	DisplayString	read-only	Host configuration file name.
INT hwMemoryFree	1.3.6.1.4.1.43.45.1.2.2.4.11	INTEGER	read-only	The hwMemoryFree mib object is obsolete as of the variable hwMemoryFree in hwMemoryTable
GAU hwMemoryLargestFree	1.3.6.1.4.1.43.45.1.2.2.5.3	Gauge	read-only	The largest free size of the contiguous area in memory. The unit is byte.
INT hwMemoryMallocFail	1.3.6.1.4.1.43.45.1.2.2.5.92	INTEGER	read-only	The times of memory allocation failures.
INT hwMemoryMallocNoMem	1.3.6.1.4.1.43.45.1.2.2.5.93	INTEGER	read-only	The times of memory allocation failures due to no free memory.
STR hwmHostHwVersion	1.3.6.1.4.1.43.45.1.2.33.6.4	DisplayString	read-only	The haredware version of the router.
STR hwmHostName	1.3.6.1.4.1.43.45.1.2.33.6.3	DisplayString	read-only	An name for this system. By convention, this is the node's fully-qualified domain name.
STR hwModuleId	1.3.6.1.4.1.43.45.1.2.2.4.1	DisplayString	read-only	Unique ID string. Defaults to module ID number if available, otherwise empty.
STR hwmRouterSerialNO	1.3.6.1.4.1.43.45.1.2.33.6.1	DisplayString	read-only	The router's unique identification.
hwmSystem	1.3.6.1.4.1.43.45.1.2.33.6
STR hwmWhyReboot	1.3.6.1.4.1.43.45.1.2.33.6.2	DisplayString	read-only	Give the reason of the system's reboot. If the system has been reboot, the value of which is null.
STR hwNetConfigName	1.3.6.1.4.1.43.45.1.2.2.6.4	DisplayString	read-only	Network configuration file name.
INT hwNVRAMSize	1.3.6.1.4.1.43.45.1.2.2.4.6	INTEGER	read-only	The total size of system non-volatile memory. The unit is Byte.
INT hwNVRAMUsed	1.3.6.1.4.1.43.45.1.2.2.4.7	INTEGER	read-only	The usage of system non-volatile memory. The unit is Byte.
INT hwPowerStatus	1.3.6.1.4.1.43.45.1.2.2.4.18	INTEGER	read-only	The current status of system power: 0:ok;1:fail;2:nopower.
INT hwRAMSize	1.3.6.1.4.1.43.45.1.2.2.4.5	INTEGER	read-only	The total size of system RAM.The unit is Byte.
STR hwROMID	1.3.6.1.4.1.43.45.1.2.2.4.2	DisplayString	read-only	System description and version information.
STR hwROMSysVersion	1.3.6.1.4.1.43.45.1.2.2.4.4	DisplayString	read-only	The software version of system ROM
STR hwROMVersion	1.3.6.1.4.1.43.45.1.2.2.4.3	DisplayString	read-only	The version of systen ROM.
TIK hwRunCfgChangedTime	1.3.6.1.4.1.43.45.1.2.2.6.1	TimeTicks	read-only	This object indicates the SysUpTime at which the running cofiguration was last changed. When the running configuration is changed but not saved, the value of hwRunCfgChangedTime is greater than hwRunCfgSavedTime.
TIK hwRunCfgSavedTime	1.3.6.1.4.1.43.45.1.2.2.6.2	TimeTicks	read-only	This object indicates the SysUpTime at which the running cofiguration was last saved. When the running configuration is changed but not saved, the value of hwRunCfgChangedTime is greater than hwRunCfgSavedTime.
INT hwSecondPowerStatus	1.3.6.1.4.1.43.45.1.2.2.4.19	INTEGER	read-only	The current status of second system power: 0:ok;1:fail;2:nopower.
TIK hwStartCfgChangedTime	1.3.6.1.4.1.43.45.1.2.2.6.3	TimeTicks	read-only	The time of SysUpTime at which the startup configuration was last written.
INT hwSysAirFlowTempIn	1.3.6.1.4.1.43.45.1.2.2.4.15	INTEGER	read-only	The current temperature of system.If the temperature is normal,ok(0) will return; If too cold,overcold(1) will return;If too hot,overhot(2) will return.
INT hwTFTPEnabled	1.3.6.1.4.1.43.45.1.2.2.4.10	INTEGER	read-only	If yes, indicates that the device can be configed through tftp. If no indicates that the device cannt be configed through tftp.
GAU hwUsedMemory	1.3.6.1.4.1.43.45.1.2.2.5.1	Gauge	read-only	The use size of the memory. The unit is Byte.
log	1.3.6.1.4.1.43.45.1.2.2.1.1.3
INT logcontroller	1.3.6.1.4.1.43.45.1.2.2.1.1.3.1	INTEGER	read-write	The label of log status that is open or close. enable(1) indicates to open;disable(2) indicates to close.
OCT logdevfacility	1.3.6.1.4.1.43.45.1.2.2.1.1.3.3.1.2	OCTET STRING	read-only	Filter name.
logfilterEntry	1.3.6.1.4.1.43.45.1.2.2.1.1.3.3.1		not-accessible	Address and level of filter filter log
INT logfilterIndex	1.3.6.1.4.1.43.45.1.2.2.1.1.3.3.1.1	INTEGER	read-only	The index of host that receives logs.
ROW logfilterstatus	1.3.6.1.4.1.43.45.1.2.2.1.1.3.3.1.3	RowStatus	read-write	The status of the entry.
logfilterTable	1.3.6.1.4.1.43.45.1.2.2.1.1.3.3		not-accessible	A list of entries of filter filter log.
INT loghostaccess	1.3.6.1.4.1.43.45.1.2.2.1.1.3.2.1.7	INTEGER	read-write	The variable is the command who perform that netmanager get the saving log information at router.
IP loghostaddress	1.3.6.1.4.1.43.45.1.2.2.1.1.3.2.1.2	IpAddress	read-only	The address of host that receives logs.
loghostEntry	1.3.6.1.4.1.43.45.1.2.2.1.1.3.2.1		not-accessible	Address and level of host receiving log
INT loghostfacility	1.3.6.1.4.1.43.45.1.2.2.1.1.3.2.1.6	INTEGER	read-write	The log that send to host is stored in the facility indicated logfacility .
INT loghostIndex	1.3.6.1.4.1.43.45.1.2.2.1.1.3.2.1.1	INTEGER	read-only	The index of host that receives logs.
INT loghostlanguage	1.3.6.1.4.1.43.45.1.2.2.1.1.3.2.1.5	INTEGER	read-write	The log in which language is incidated by loglanguage .
INT loghostport	1.3.6.1.4.1.43.45.1.2.2.1.1.3.2.1.3	INTEGER	read-only	The port of host that receives logs.
INT loghostseverity	1.3.6.1.4.1.43.45.1.2.2.1.1.3.2.1.4	INTEGER	read-write	The severity indicates the level of log that is sended to host .
ROW loghoststatus	1.3.6.1.4.1.43.45.1.2.2.1.1.3.2.1.8	RowStatus	read-write	The status of the entry.
loghostTable	1.3.6.1.4.1.43.45.1.2.2.1.1.3.2		not-accessible	A list of entries of host recieving log.
moduleEntry	1.3.6.1.4.1.43.45.1.2.2.2.1.1		not-accessible	Possible values of indices are 1..stackMaxChassis, 1..chassisMaxModules and 1..moduleMaxmodules
INT moduleFirstPort	1.3.6.1.4.1.43.45.1.2.2.2.1.1.4	INTEGER	read-only	The portIndex of the first port on the module.
STR moduleHwVersion	1.3.6.1.4.1.43.45.1.2.2.2.1.1.8	DisplayString	read-only	Hardware version number for this module.
INT moduleIndex	1.3.6.1.4.1.43.45.1.2.2.2.1.1.1	INTEGER	read-only	Module number in the module.
INT moduleNumberOfPorts	1.3.6.1.4.1.43.45.1.2.2.2.1.1.5	INTEGER	read-only	The number of ports on the module.
INT moduleSlotNum	1.3.6.1.4.1.43.45.1.2.2.2.1.1.2	INTEGER	read-only	Slot number in the module.
STR moduleSwVersion	1.3.6.1.4.1.43.45.1.2.2.2.1.1.7	DisplayString	read-only	Software version number for this module.
moduleTable	1.3.6.1.4.1.43.45.1.2.2.2.1		not-accessible	Possible values of indices are 1..moduleMaxmodules
INT moduleType	1.3.6.1.4.1.43.45.1.2.2.2.1.1.3	INTEGER	read-only	The product identification of the module.
INT moduleVersion	1.3.6.1.4.1.43.45.1.2.2.2.1.1.6	INTEGER	read-only	Hardware version number for this module. First version is 0, second is 1, and so on.
routerGeneral	1.3.6.1.4.1.43.45.1.2.2.1
trap	1.3.6.1.4.1.43.45.1.2.2.1.1.2
OCT version	1.3.6.1.4.1.43.45.1.2.2.1.1.1.1	OCTET STRING	read-only	The version of the software of system .
vrp	1.3.6.1.4.1.43.45.1.2.2.1.1.4

RFC description

Router system MIB for managing memory, configuration, flash, logging, and power status on Huawei routers.

Start monitoring H3C/3Com switches and routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download A3COM-HUAWEI-MLSR-SYSTEM-MIB

What Is A3COM-HUAWEI-MLSR-SYSTEM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description