ALVARION-DEVICE-WIRELESS-MIB

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsALVARION-DEVICE-WIRELESS-MIB

Organization: Alvarion Ltd.

Last Updated: 2007-10-31

Category: Vendor: Alvarion, Wireless and WLAN

Description: Alvarion wireless device radio MIB for managing RF channel, transmit power, and wireless association parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALVARION-DEVICE-WIRELESS-MIB?

ALVARION-DEVICE-WIRELESS-MIB is a vendor MIB from Alvarion for wireless broadband devices, exposing radio-level configuration and status for the wireless interface, including SNR (signal-to-noise ratio) thresholds, transmit power, operating channel, and operating/radio mode. It provides both configuration objects (minimum SNR level, notification intervals) and a per-radio interface status table reporting live operating parameters. Its central use is monitoring the hardware/RF status of the radio - signal quality (SNR), transmit power level, and channel assignment are direct indicators of wireless link health and are used to detect interference, misalignment, or degraded RF conditions. It's a self-contained vendor MIB with no apparent explicit dependency on other standard MIBs from the given data. It's typically deployed on Alvarion wireless broadband base stations and subscriber units for RF link quality monitoring, with the ALVARION-DEVICE-WIRELESS-MIB MIB loaded into the network management system to expose these radio-level objects.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALVARION-DEVICE-WIRELESS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • Alvarion wireless broadband base stations and subscriber units

Monitoring Examples

An admin polls coDeviceWirelessInterfaceStatusTable/coDeviceWirelessInterfaceStatusEntry by coDevWirIfStaRadioIndex to read coDevWirIfStaTransmitPower and coDevWirIfStaOperatingChannel, confirming the radio is transmitting at the expected power on the assigned channel. coDevWirMinimumSNRLevel combined with coDevWirSNRLevelNotificationEnabled triggers a trap when SNR falls below threshold, flagging a degrading wireless link due to interference or antenna misalignment; coDevWirIfStaOperatingMode confirms whether the radio is operating in the expected mode.

What Can Be Monitored

  • SNR level and threshold
  • transmit power
  • operating channel
  • operating/radio mode
  • association status notifications
Imported Objects

From ALVARION-DEVICE-MIB

coDevDisIndexOBJECT-TYPE

From ALVARION-SMI

alvarionMgmtV2OBJECT-IDENTITY

From ALVARION-TC

AlvarionNotificationEnable
AlvarionRadioType
AlvarionSSIDOrNone

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

MacAddress
TruthValue

How to Use in IPNetwork Monitor

Example using coDevWirIfStsTransmittedFragmentCount OID:

Select an Alvarion (Cambium) wireless broadband access points/base station (legacy) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type coDevWirIfStsTransmittedFragmentCount into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. This counter is incremented for each acknowledged MPDU with an individual address in the address 1 field or an MPDU with a multicast address in the address 1 field of type Data or Management. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs

RFC description

Alvarion vendor-private MIB for wireless access point and radio device management; monitors radio states, client associations, and wireless metrics.

Start monitoring Alvarion (Cambium) wireless broadband access points/base stations (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALVARION-DEVICE-WIRELESS-MIB