ALCATEL-IND1-TIMETRA-SAP-MIB :: sapAtmOamTerminate

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsALCATEL-IND1-TIMETRA-SAP-MIBsapAtmOamTerminate

sapAtmOamTerminate

Module: ALCATEL-IND1-TIMETRA-SAP-MIB

OID (symbolic): ALCATEL-IND1-TIMETRA-SAP-MIB::sapAtmOamTerminate

OID (numeric): 1.3.6.1.4.1.6527.3.1.2.4.3.4.1.5

Node type: OBJECT-TYPE

Type: ServiceAdminStatus

Access: read-write

Description: The sapAtmOamTerminate object specifies whether this SAP will act as an OAM termination point. If enabled, OAM cells will be sunk by the SAP and can affect the SAP's operational status (if sapAtmOamAlarmCellHandling is also enabled). Otherwise the OAM cells will be passed into the APIPE service. This object is only configurable for ATM SAPs that are part of an APIPE service SDU or VCC mode. If the sapPortId belongs to an Multi-Chassis APS port, the default value is up.

What is sapAtmOamTerminate?

This configurable object controls whether the SAP acts as an ATM OAM termination point, causing it to absorb (sink) incoming OAM cells rather than passing them through. When enabled, the SAP's operational status can be influenced by received OAM alarm cells, depending on the sapAtmOamAlarmCellHandling setting.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.4.3.4.1.5
snmpwalk -v2c -c public <target> ALCATEL-IND1-TIMETRA-SAP-MIB::sapAtmOamTerminate

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.4.3.4.1.5.1
snmpget -v2c -c public <target> ALCATEL-IND1-TIMETRA-SAP-MIB::sapAtmOamTerminate.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.6527.3.1.2.4.3.4.1.5.1 s <value>

Start monitoring Nokia (Alcatel-Lucent) 7750 SR-series service routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ALCATEL-IND1-TIMETRA-SAP-MIB::sapAtmOamTerminate OID value, configure state conditions and alerts, and monitor any Nokia (Alcatel-Lucent) 7750 SR-series service routers from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6527timetraALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3timetraProductsALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1tmnxSRMIBALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1.2tmnxSRObjsALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1.2.4tmnxServObjsALCATEL-IND1-TIMETRA-SERV-MIB
Numeric OIDNameModule
1.3.6.1.4.1.6527.3.1.2.4.3tmnxSapObjsALCATEL-IND1-TIMETRA-SAP-MIB
1.3.6.1.4.1.6527.3.1.2.4.3.4sapAtmInfoTableALCATEL-IND1-TIMETRA-SAP-MIB
1.3.6.1.4.1.6527.3.1.2.4.3.4.1sapAtmInfoEntryALCATEL-IND1-TIMETRA-SAP-MIB
1.3.6.1.4.1.6527.3.1.2.4.3.4.1.5sapAtmOamTerminateALCATEL-IND1-TIMETRA-SAP-MIB