ALCATEL-IND1-TIMETRA-SAP-MIB :: sapAtmOamPeriodicLoopback

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsALCATEL-IND1-TIMETRA-SAP-MIBsapAtmOamPeriodicLoopback

sapAtmOamPeriodicLoopback

Module: ALCATEL-IND1-TIMETRA-SAP-MIB

OID (symbolic): ALCATEL-IND1-TIMETRA-SAP-MIB::sapAtmOamPeriodicLoopback

OID (numeric): 1.3.6.1.4.1.6527.3.1.2.4.3.4.1.6

Node type: OBJECT-TYPE

Type: ServiceAdminStatus

Access: read-write

Description: The sapAtmOamPeriodicLoopback object specifies whether this SAP will run periodic OAM loopbacks or not. If enabled, an ATM OAM loopback cell will be transmitted every period as configured in tAtmSysOamLoopbackPeriod. If a response is not received and tAtmSysOamRetryDown consecutive retries also result in failure, the endpoint will transition to the eteAisLoc state. Once in the eteAisLoc state, an ATM OAM loopback cell will be transmitted every period as configured in tAtmSysOamLoopbackPeriod. If a response is received for the periodic loopback and tAtmSysOamRetryUp consecutive retries also each receive a response, the endpoint will transition back to the up state. This object is only configurable on IES or VPRN service endpoints.

What is sapAtmOamPeriodicLoopback?

This configurable object enables or disables the periodic transmission of ATM OAM loopback cells on the SAP to verify end-to-end ATM connectivity. When enabled, loopback cells are sent at the interval defined by the system-wide tAtmSysOamLoopbackPeriod parameter.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.4.3.4.1.6
snmpwalk -v2c -c public <target> ALCATEL-IND1-TIMETRA-SAP-MIB::sapAtmOamPeriodicLoopback

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.4.3.4.1.6.1
snmpget -v2c -c public <target> ALCATEL-IND1-TIMETRA-SAP-MIB::sapAtmOamPeriodicLoopback.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.6527.3.1.2.4.3.4.1.6.1 s <value>

Start monitoring Nokia (Alcatel-Lucent) 7750 SR-series service routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ALCATEL-IND1-TIMETRA-SAP-MIB::sapAtmOamPeriodicLoopback OID value, configure state conditions and alerts, and monitor any Nokia (Alcatel-Lucent) 7750 SR-series service routers from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6527timetraALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3timetraProductsALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1tmnxSRMIBALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1.2tmnxSRObjsALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1.2.4tmnxServObjsALCATEL-IND1-TIMETRA-SERV-MIB
Numeric OIDNameModule
1.3.6.1.4.1.6527.3.1.2.4.3tmnxSapObjsALCATEL-IND1-TIMETRA-SAP-MIB
1.3.6.1.4.1.6527.3.1.2.4.3.4sapAtmInfoTableALCATEL-IND1-TIMETRA-SAP-MIB
1.3.6.1.4.1.6527.3.1.2.4.3.4.1sapAtmInfoEntryALCATEL-IND1-TIMETRA-SAP-MIB
1.3.6.1.4.1.6527.3.1.2.4.3.4.1.6sapAtmOamPeriodicLoopbackALCATEL-IND1-TIMETRA-SAP-MIB