ALCATEL-IND1-RIP-MIB

All MIBs › ALCATEL-IND1-RIP-MIB

Organization: Alcatel-Lucent

Last Updated: 2007-04-03

Category: Routing Protocols, Vendor: Alcatel-Lucent

Description: Alcatel OmniSwitch RIPv1/v2 routing protocol MIB for managing RIP interfaces, neighbors, and route redistribution.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALCATEL-IND1-RIP-MIB?

ALCATEL-IND1-RIP-MIB is an Alcatel-Lucent OmniSwitch proprietary MIB for configuring the RIPv1/v2 routing protocol, and the sampled portion of the module defines its trap/notification structure (alcatelIND1RIPTraps, alcatelIND1RIPTrapsRoot) used to alert on RIP-related events. Beyond configuration objects for RIP interfaces, neighbors, and redistribution, this trap branch is the module's fault-notification mechanism, letting the switch proactively signal RIP protocol events rather than requiring constant polling. Its monitoring value here is squarely in the faults/traps category: it defines the notification framework a management station would subscribe to in order to be alerted to RIP routing anomalies as they occur, rather than a periodic counter to poll. It is built as an Alcatel extension of the standard RIPv2 protocol (RFC 2453) and follows the conventional SNMP notification pattern used across Alcatel's IND1 MIB family. It is typically deployed on Alcatel/Alcatel-Lucent OmniSwitch routers running RIP where operators want event-driven alerting for routing protocol issues. Engineers can download the ALCATEL-IND1-RIP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-RIP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alcatel/Alcatel-Lucent OmniSwitch router

Monitoring Examples

A management station subscribes to notifications rooted at alcatelIND1RIPTrapsRoot so that when the switch's RIP process encounters a defined event (per the parent alcatelIND1RIPTraps branch) it receives an unsolicited trap instead of relying purely on polling. This lets operators react immediately to a RIP routing anomaly rather than discovering it only on the next scheduled poll cycle.

What Can Be Monitored

RIP protocol trap/notification events

Imported Objects

From ALCATEL-IND1-BASE

routingIND1Rip

OBJECT-IDENTITY

From RIPv2-MIB

rip2IfConfEntry

OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
alaProtocolRip	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1
alaRip2IfConfAugEntry	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.11.1		not-accessible	An entry of alaRip2IfConfAugTable
alaRip2IfConfAugTable	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.11		not-accessible	Expansion for rip2ifconftable
ALA alaRip2IfConfEncryptKey	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.11.1.1	AlaAuthenticationEncryptKey	read-write	The authentication encryption key that is used to decypher RIP passwords.
STR alaRip2IfConfName	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.11.1.4	DisplayString	read-only	The user defined name used to identify the IP interface
IP alaRip2IfConfPtoPPeer	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.11.1.6	IpAddress	read-write	The address of the peer for a point-to-point rip interface
INT alaRip2IfConfType	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.11.1.5	INTEGER	read-write	The type of the rip interface
INT alaRip2IfIpConfStatus	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.11.1.2	INTEGER	read-only	The status of the associated IP interface
I32 alaRip2IfRecvPkts	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.11.1.3	Integer32	read-only	Number of packets received on this interface
alaRipDebug	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.2
INT alaRipDebugAge	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.2.7	INTEGER	read-write	This Object is deprecated in favour of alaDrcTmRipDebugAge MIB Object of alaDrcTmRipDebug Configuration
INT alaRipDebugAll	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.2.13	INTEGER	read-write	This Object is deprecated in favour of alaDrcTmRipDebugAll MIB Object of alaDrcTmRipDebug Configuration
INT alaRipDebugConfig	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.2.8	INTEGER	read-write	This Object is deprecated in favour of alaDrcTmRipDebugConfig MIB Object of alaDrcTmRipDebug Configuration
INT alaRipDebugError	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.2.2	INTEGER	read-write	This Object is deprecated in favour of alaDrcTmRipDebugError MIB Object of alaDrcTmRipDebug Configuration
alaRipDebugGroup	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.2.1.3			Collection of objects for management of Debug Information. These objects have been deprecated, and this group is no longer mandatory.
INT alaRipDebugInfo	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.2.10	INTEGER	read-write	This Object is deprecated in favour of alaDrcTmRipDebugInfo MIB Object of alaDrcTmRipDebug Configuration
INT alaRipDebugLevel	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.2.1	INTEGER	read-write	This Object is deprecated in favour of alaDrcTmRipDebug Configuration
INT alaRipDebugRdb	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.2.6	INTEGER	read-write	This Object is deprecated in favour of alaDrcTmRipDebugRdb MIB Object of alaDrcTmRipDebug Configuration
INT alaRipDebugRecv	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.2.4	INTEGER	read-write	This Object is deprecated in favour of alaDrcTmRipDebugRecv MIB Object of alaDrcTmRipDebug Configuration
INT alaRipDebugRedist	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.2.9	INTEGER	read-write	This Object is deprecated in favour of alaDrcTmRipDebugRedist MIB Object of alaDrcTmRipDebug Configuration
INT alaRipDebugSend	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.2.5	INTEGER	read-write	This Object is deprecated in favour of alaDrcTmRipDebugSend MIB Object of alaDrcTmRipDebug Configuration
INT alaRipDebugSetup	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.2.11	INTEGER	read-write	This Object is deprecated in favour of alaDrcTmRipDebugSetup MIB Object of alaDrcTmRipDebug Configuration
INT alaRipDebugTime	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.2.12	INTEGER	read-write	This Object is deprecated in favour of alaDrcTmRipDebugTime MIB Object of alaDrcTmRipDebug Configuration
INT alaRipDebugWarn	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.2.3	INTEGER	read-write	This Object is deprecated in favour of alaDrcTmRipDebugWarning MIB Object of alaDrcTmRipDebug Configuration
TIK alaRipEcmpRouteAge	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.12.1.5	TimeTicks	read-only	The number of seconds since this route was last updated or otherwise determined to be correct.
IP alaRipEcmpRouteDest	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.12.1.1	IpAddress	not-accessible	The destination IP address of this route.
alaRipEcmpRouteEntry	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.12.1		not-accessible	ECMP-enabled RIP routing table which contains the network routes.
alaRipEcmpRouteGroup	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.2.1.6			Collection of objects for management of Network Route configuration.
IP alaRipEcmpRouteMask	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.12.1.2	IpAddress	not-accessible	The network mask for this route.
INT alaRipEcmpRouteMetric	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.12.1.7	INTEGER	read-only	The routing metric for this route.
IP alaRipEcmpRouteNextHop	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.12.1.3	IpAddress	not-accessible	The address of the next hop to reach this route.
INT alaRipEcmpRouteState	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.12.1.9	INTEGER	read-only	The associated state for this route.
ROW alaRipEcmpRouteStatus	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.12.1.8	RowStatus	read-only	The row status variable, used according to row installation and removal conventions.
alaRipEcmpRouteTable	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.12		not-accessible	ECMP-enabled RIP routing table which contains the network routes.
INT alaRipEcmpRouteTag	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.12.1.6	INTEGER	read-only	The associated route tag.
INT alaRipEcmpRouteType	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.12.1.4	INTEGER	read-only	The type of route.
INT alaRipForceHolddownTimer	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.5	INTEGER	read-write	Interval in seconds during which routing information regarding better paths is suppressed. A route enters into a forced holddown state when an update packet is received that indicates the route is unreachable and when this timer value is nonzero. After this timer has expired, if the value is less that 120 - the route enters a holddown state for the rest of the period until 120. During this time advertisements for better paths are accepted if any.
I32 alaRipGarbageTimer	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.16	Integer32	read-write	Time to keep a route before garbage collection.
I32 alaRipHolddownTimer	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.15	Integer32	read-write	Time to keep a route in the holddown state.
INT alaRipHostRouteSupport	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.2	INTEGER	read-write	Enable or disable support for host routes.
I32 alaRipInvalidTimer	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.14	Integer32	read-write	Time in seconds that a route will remain active in RIB before being moved to the invalid state. The value must be at least three times the update interval.
alaRipMiscellaneousGroup	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.2.1.1			Collection of Miscellaneous objects for management of RIP.
INT alaRipProtoStatus	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.1	INTEGER	read-write	Global administration status of RIP.
INT alaRipRedistAdminStatus	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.3	INTEGER	read-write	Enable or disable redistribution of routes into RIP. This object has been obsoleted. Use the alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib.
alaRipRedistProtoEntry	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.7.1		not-accessible	A range of routes from a protocol to be redistributed using RIP. This entry has been obsoleted. Use alaRouteMapRedistProtoEntry of AlcatelIND1RouteMap.mib.
alaRipRedistProtoGroup	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.2.1.2			Collection of objects for management of Route Redistribution Protocol. These objects have been obsoleted, and this group is no longer mandatory.
INT alaRipRedistProtoId	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.7.1.1	INTEGER	read-only	The routing mechanism via which the routes, to be redistributed using RIP, are learned. This object has been obsoleted. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib.
INT alaRipRedistProtoMetric	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.7.1.2	INTEGER	read-write	Default metric to be used for redistributing routes. This object has been obsoleted. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib.
ROW alaRipRedistProtoStatus	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.7.1.3	RowStatus	read-write	Add or Delete entries. This object has been obsoleted. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib.
alaRipRedistProtoTable	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.7		not-accessible	Protocol based configuration for route redistribution using RIP. This table has been obsoleted. Use alaRouteMapRedistProtoTable of AlcatelIND1RouteMap.mib.
INT alaRipRedistRouteControl	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.10.1.5	INTEGER	read-write	Specifies how routes matching this entry are to be redistributed into RIP. The different mechanisms possible are to redistribute all the subnet routes, redistribute an aggregated route if there are one or more actual routes which match this entry or redistribute only an exactly matching route. This object has been obsoleted. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib.
IP alaRipRedistRouteDest	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.10.1.2	IpAddress	read-only	The destination IP address of this route. This object has been obsoleted. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib.
INT alaRipRedistRouteEffect	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.10.1.7	INTEGER	read-write	Specifies whether the redistribution of routes in this range is allowed or denied. This object has been obsoleted. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib.
alaRipRedistRouteEntry	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.10.1		not-accessible	An entry of alaRipRedistRouteTable which specifies a route or set of routes to be redistributed by RIP from another routing protocol. This entry has been obsoleted. Use alaRouteMapRedistProtoEntry of AlcatelIND1RouteMap.mib.
alaRipRedistRouteGroup	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.2.1.5			Collection of objects for management of Route Redistribution configuration. These objects have been obsoleted, and this group is no longer mandatory.
IP alaRipRedistRouteMask	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.10.1.3	IpAddress	read-only	The network mask for this route. This object has been obsoleted. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib.
INT alaRipRedistRouteMetric	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.10.1.4	INTEGER	read-write	The metric to be used for the redistributed route. A value of 0 means that the metric used should be the value configured in alaRipRedistProtoMetric for this protocol. This object has been obsoleted. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib.
INT alaRipRedistRouteProto	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.10.1.1	INTEGER	read-only	Protocol from which this route is to be imported into RIP. This object has been obsoleted. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib.
ROW alaRipRedistRouteStatus	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.10.1.8	RowStatus	read-write	The row status variable, used according to row installation and removal conventions. This object has been obsoleted. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib.
alaRipRedistRouteTable	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.10		not-accessible	A configuration table which controls the routes to be redistributed by RIP from other routing protocols. This table has been obsoleted. Use alaRouteMapRedistProtoTable of AlcatelIND1RouteMap.mib.
INT alaRipRedistRouteTag	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.4	INTEGER	read-write	A 32-bit value tagged to each RIP internal route while it is redistributed in to other routing protocol domains. The lower 16-bits typically indicate the autonomous system number.
INT alaRipRedistRouteTagMatch	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.10.1.6	INTEGER	read-write	Redistribute the route only when the route tag matches with this value. It defaults to -1 which matches all route tags. This object has been obsoleted. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib.
TIK alaRipRouteAge	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.9.1.5	TimeTicks	read-only	The number of seconds since this route was last updated or otherwise determined to be correct. This Object is deprecated in favour of alaRipEcmpRouteAge.
IP alaRipRouteDest	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.9.1.1	IpAddress	read-only	The destination IP address of this route. This Object is deprecated in favour of alaRipEcmpRouteDest.
alaRipRouteEntry	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.9.1		not-accessible	RIP routing table which contains the network routes. This Object is deprecated in favour of alaRipEcmpRouteEntry. This deprecated object is indexed by Destination/Mask. With the addition of ECMP support, routes can now have more than one nexthop, which requires routing entries to be identified/indexed by Destination/Mask/NextHop. As a result of this change, GET/GETNEXT operations on this deprecated object (which provide only Destination/Mask) will fail to uniquely identify a routing table entry. In response, the router will return only the first nexthop in its list of nexthops for the given routing destination. The order of the router's internal nexthop list is not specified or guaranteed, so there's no assurance that the returned nexthop will be active, installed, or otherwise in service. To retrieve information on all nexthops for a given destination, use alaRipEcmpRouteTable instead.
alaRipRouteGroup	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.2.1.4			Collection of objects for management of Network Route configuration. This Object is deprecated in favour of alaRipEcmpRouteGroup.
IP alaRipRouteMask	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.9.1.2	IpAddress	read-only	The network mask for this route. This Object is deprecated in favour of alaRipEcmpRouteMask.
INT alaRipRouteMetric	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.9.1.7	INTEGER	read-only	The routing metric for this route. This Object is deprecated in favour of alaRipEcmpRouteMetric.
IP alaRipRouteNextHop	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.9.1.3	IpAddress	read-only	The address of the next hop to reach this route. This Object is deprecated in favour of alaRipEcmpRouteNextHop.
INT alaRipRouteNumber	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.6	INTEGER	read-only	The number of network routes in RIP routing table.
ROW alaRipRouteStatus	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.9.1.8	RowStatus	read-only	The row status variable, used according to row installation and removal conventions. This Object is deprecated in favour of alaRipEcmpRouteStatus.
alaRipRouteTable	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.9		not-accessible	RIP routing table which contains the network routes. This Object is deprecated in favour of alaRipEcmpRouteTable.
INT alaRipRouteTag	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.9.1.6	INTEGER	read-only	The associated route tag. This Object is deprecated in favour of alaRipEcmpRouteTag.
INT alaRipRouteType	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.9.1.4	INTEGER	read-only	The type of route. This Object is deprecated in favour of alaRipEcmpRouteType.
I32 alaRipUpdateInterval	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1.1.13	Integer32	read-write	Interval (in seconds) that RIP routing updates will be sent out. The value must be less than or equal to one-third the value of the invalid timer.
alcatelIND1RIPMIB	1.3.6.1.4.1.6486.801.1.2.1.10.3.1			This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line Configuration Of Global RIP Configuration Parameters. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
alcatelIND1RIPMIBCompliance	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.2.2.1			Compliance statement for Routing Information Protocol (RIP) Subsystem.
alcatelIND1RIPMIBCompliances	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.2.2			Branch for Routing Information Protocol (RIP) Subsystem Compliance Statements.
alcatelIND1RIPMIBConformance	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.2			Branch for Routing Information Protocol (RIP) Subsystem Conformance Information.
alcatelIND1RIPMIBGroups	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.2.1			Branch for Routing Information Protocol (RIP) Subsystem Units Of Conformance.
alcatelIND1RIPMIBObjects	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.1			Branch for Routing Information Protocol (RIP) Subsystem Managed Objects.
alcatelIND1RIPTraps	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.3
alcatelIND1RIPTrapsRoot	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.3.0
NTF ripRouteMaxLimitReached	1.3.6.1.4.1.6486.801.1.2.1.10.3.1.3.0.1			This notification is generated as RIP database reached supported Maximum entries. RIP will discard any new updates.

RFC description

Configures global RIP (Routing Information Protocol) parameters for Alcatel-Lucent routing infrastructure.

Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALCATEL-IND1-RIP-MIB

What Is ALCATEL-IND1-RIP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description