ALCATEL-IND1-MVRP-MIB

All MIBs › ALCATEL-IND1-MVRP-MIB

Organization: Alcatel-Lucent

Last Updated: 2010-05-13

Category: VLAN and Bridging, Vendor: Alcatel-Lucent

Description: Alcatel OmniSwitch Multiple VLAN Registration Protocol MIB for IEEE 802.1ak dynamic VLAN membership propagation.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALCATEL-IND1-MVRP-MIB?

ALCATEL-IND1-MVRP-MIB is an Alcatel-Lucent OmniSwitch proprietary MIB implementing the IEEE 802.1ak Multiple VLAN Registration Protocol (MVRP), which dynamically propagates VLAN membership information between switches. Although no sample objects were provided, by design it would expose per-port MVRP operational state, registered VLAN sets, and protocol timers used in the dynamic registration process. Its monitoring value lies in confirming the software-level state of dynamic VLAN propagation -- whether MVRP is enabled/operating correctly on a port and which VLANs have been dynamically registered -- which helps catch VLAN propagation failures across a switched network. It is explicitly built as an implementation of the IEEE 802.1ak standard, so it depends directly on that specification's registration model. It is typically deployed on Alcatel/Alcatel-Lucent OmniSwitch enterprise switches that use MVRP instead of static or GVRP-based VLAN configuration across trunk links. Engineers can download the ALCATEL-IND1-MVRP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-MVRP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alcatel/Alcatel-Lucent OmniSwitch enterprise switch

Monitoring Examples

Because no sample objects were provided for this module, a concrete object-level polling scenario can't be given with confidence; based on the module description, an operator would check per-port MVRP registration state to confirm dynamically learned VLANs are propagating correctly across trunked links.

What Can Be Monitored

per-port MVRP operational state
dynamically registered VLANs
MVRP protocol timers

Imported Objects

From ALCATEL-IND1-BASE

softentIND1Mvrp

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From P-BRIDGE-MIB

EnabledStatus

From Q-BRIDGE-MIB

VlanId

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

MacAddress
TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using alaMvrpPortStatsNewReceived OID:

Select an Alcatel-Lucent Enterprise OmniSwitch switch as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type alaMvrpPortStatsNewReceived into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of New messages received. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
alcatelIND1MVRPMIB	1.3.6.1.4.1.6486.801.1.2.1.62.1			This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line MVRP for the distribution of VLAN configuration information. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2009 Alcatel-Lucent, Incorporated ALL RIGHTS RESERVED WORLDWIDE
alcatelIND1MVRPMIBNotifications	1.3.6.1.4.1.6486.801.1.2.1.62.1.0			Branch For MVRP MIB Subsystem Notifications.
NTF alaMvrpVlanLimitReachedEvent	1.3.6.1.4.1.6486.801.1.2.1.62.1.0.1			The number of vlans learnt dynamically by MVRP has reached a configured limit. Notify the management entity with number of vlans learnt dynamically by MVRP and the configured MVRP vlan limit.
NTF alaMvrpE2eVlanConflict	1.3.6.1.4.1.6486.801.1.2.1.62.1.0.2			MVRP has recieved a registration for Vlan which is configured for End To End Flow Control. Notify the Management with the Port in which the MVRP PDU was recieved and the Vlan.
alcatelIND1MVRPMIBObjects	1.3.6.1.4.1.6486.801.1.2.1.62.1.1			Branch For MVRP Subsystem Managed Objects.
ENA alaMvrpGlobalStatus	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.1	EnabledStatus	read-write	The administrative global status requested by management for MVRP. The value enabled(1) indicates that MVRP should be enabled on this device. When disabled(2), MVRP is disabled in the system and all MVRP packets will be forwarded transparently if transparent switching status is also enabled. This object affects all MVRP Applicant and Registrar state machines. A transition from disabled(2) to enabled(1) will cause a reset of all MVRP state machines on all ports.
INT alaMvrpGlobalClearStats	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.2	INTEGER	read-write	Defines the global clear statistics control for MVRP. The value reset (1) indicates that MVRP should clear all statistic counters related to all ports in the system. By default, this object contains a zero value.
ENA alaMvrpTransparentSwitching	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.3	EnabledStatus	read-write	Defines the behavior when MVRP is globally disabled on a device. The value enabled (1) indicates that device behaves like a MVRP transparent device and the MVRP frames will be flooded transparently. Value disabled (2) disabled indicates that the device will not flood MVRP frames and will simply discard the received MVRP frames.
I32 alaMvrpMaxVlanLimit	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.4	Integer32	read-write	Defines the maximum number of dynamic VLANs that can be created on the system by MVRP. If the number of VLANs created by MVRP reaches this limit, the system will prevent MVRP from creating additional VLANs.
OCT alaMvrpVlanConflictInfo	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.5	OCTET STRING	read-only	MVRP has received registration for Vlan which is configured for End To End Flow Control. Notify the Management with the Port in which the MVRP PDU was recieved and the Vlan.
INT alaVlanRegistrationProtocolType	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.6	INTEGER	read-write	Defines which VLAN registration mode is running in the system.
alaMvrpPortConfig	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.7
alaMvrpPortConfigTable	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.7.1		not-accessible	A table containing MVRP port configuration information.
alaMvrpPortConfigEntry	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.7.1.1		not-accessible	A MVRP port configuration entry.
NUM alaMvrpPortConfigIfIndex	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.7.1.1.1	InterfaceIndex	not-accessible	The ifindex of the port on which MVRP is running
ENA alaMvrpPortStatus	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.7.1.1.2	EnabledStatus	read-write	The state of MVRP operation on this port. The value enabled(1) indicates that MVRP is enabled on this port. When disabled(2), MVRP is disabled on this port. Any MVRP packets received will be silently discarded on this port and no MVRP registrations will be propagated from this port. This object affects all MVRP Applicant and Registrar state machines on this port. A transition from disabled(2) to enabled(1) will cause a reset of all MVRP state machines on this port.
INT alaMvrpPortConfigRegistrarMode	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.7.1.1.3	INTEGER	read-write	Defines the mode of operation of all the registrar state machines associated to the port. normal - registration as well as de-registration of VLANs are allowed. fixed - A VLAN that was previously mapped onto such a port either dynamically or statically cannot be de-registered through MVRP. When the port registration mode is set to fixed, VLAN(s) can only be mapped onto such port statically. forbidden - dynamic VLAN registration or de-registration are not allowed on the port. NOTE: The registrar state machines for the default VLAN will operate in Fixed Registration Mode for all the ports on the switch.
INT alaMvrpPortConfigApplicantMode	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.7.1.1.4	INTEGER	read-write	Defines the mode of operation of all the applicant state machines associated to the port. participant - The state machines participates normally in MVRP protocol exchanges. nonparticipant - The state machines does not send any MVRP PDU(s). active - The state machines send MVRP frames even on ports that are in blocking state on the active spanning tree instance.
I32 alaMvrpPortConfigJoinTimer	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.7.1.1.5	Integer32	read-write	Maximum period of time that a MVRP instance waits before making declarations for VLANs.
I32 alaMvrpPortConfigLeaveTimer	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.7.1.1.6	Integer32	read-write	Period of time that a registrar state machine of a MVRP instance waits, after receiving a leave message on a port for a particular VLAN, to remove the registration of that VLAN on the port. The value for the Leave Timer must be greater than twice the value for the Join timer, plus six times the timer resolution.
I32 alaMvrpPortConfigLeaveAllTimer	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.7.1.1.7	Integer32	read-write	Interval at which the Leave All state machine of a MVRP instance generates Leave All messages. A Leave All message instructs MVRP to modify the state of all VLANs registered on a port to Leaving. The value for the LeaveAll Timer must be greater than the value for the Leave timer.
I32 alaMvrpPortConfigPeriodicTimer	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.7.1.1.8	Integer32	read-write	Interval at which the Periodic transmission state machine of a MVRP instance generates transmission opportunities for the MVRP instance.
ENA alaMvrpPortConfigPeriodicTransmissionStatus	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.7.1.1.9	EnabledStatus	read-write	Used to enable or disable the Periodic transmission state machine of a MVRP instance.
alaMvrpPortStats	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.8
alaMvrpPortStatsTable	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.8.1		not-accessible	A table containing MVRP port statistics information.
alaMvrpPortStatsEntry	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.8.1.1		not-accessible	A MVRP port statistics entry.
NUM alaMvrpPortStatsIfIndex	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.8.1.1.1	InterfaceIndex	not-accessible	The ifindex of the port on which MVRP is running
C32 alaMvrpPortStatsNewReceivedEx	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.8.1.1.2	Counter32	read-only	The number of New messages received.
C32 alaMvrpPortStatsJoinInReceived	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.8.1.1.3	Counter32	read-only	The number of Join In messages received.
C32 alaMvrpPortStatsJoinEmptyReceived	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.8.1.1.4	Counter32	read-only	The number of Join Empty messages received.
C32 alaMvrpPortStatsLeaveReceived	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.8.1.1.5	Counter32	read-only	The number of Leave messages received.
C32 alaMvrpPortStatsInReceived	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.8.1.1.6	Counter32	read-only	The number of In messages received.
C32 alaMvrpPortStatsEmptyReceived	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.8.1.1.7	Counter32	read-only	The number of Empty messages received.
C32 alaMvrpPortStatsLeaveAllReceived	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.8.1.1.8	Counter32	read-only	The number of Leave all messages received.
C32 alaMvrpPortStatsNewTransmitted	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.8.1.1.9	Counter32	read-only	The number of New messages transmitted.
C32 alaMvrpPortStatsJoinInTransmitted	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.8.1.1.10	Counter32	read-only	The number of Join In messages transmitted.
C32 alaMvrpPortStatsJoinEmptyTransmitted	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.8.1.1.11	Counter32	read-only	The number of Join Empty messages transmitted.
C32 alaMvrpPortStatsLeaveTransmitted	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.8.1.1.12	Counter32	read-only	The number of Leave messages transmitted.
C32 alaMvrpPortStatsInTransmitted	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.8.1.1.13	Counter32	read-only	The number of In messages transmitted.
C32 alaMvrpPortStatsEmptyTransmitted	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.8.1.1.14	Counter32	read-only	The number of Empty messages transmitted.
C32 alaMvrpPortStatsLeaveAllTransmitted	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.8.1.1.15	Counter32	read-only	The number of Leave all messages transmitted.
C32 alaMvrpPortStatsTotalPDUReceived	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.8.1.1.16	Counter32	read-only	The total number of MVRP PDUs received.
C32 alaMvrpPortStatsTotalPDUTransmitted	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.8.1.1.17	Counter32	read-only	The total number of MVRP PDUs transmitted.
C32 alaMvrpPortStatsTotalMsgsReceived	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.8.1.1.18	Counter32	read-only	The total number of MVRP messages received.
C32 alaMvrpPortStatsTotalMsgsTransmitted	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.8.1.1.19	Counter32	read-only	The total number of MVRP messages transmitted.
C32 alaMvrpPortStatsInvalidMsgsReceived	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.8.1.1.20	Counter32	read-only	The number of Invalid messages received.
C32 alaMvrpPortFailedRegistrations	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.8.1.1.21	Counter32	read-only	The total number of failed GVRP registrations, for any reason, on this port.
MAC alaMvrpPortLastPduOrigin	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.8.1.1.22	MacAddress	read-only	The Source MAC Address of the last GVRP message received on this port.
INT alaMvrpPortStatsClearStats	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.8.1.1.23	INTEGER	read-write	Reset all statistics parameters corresponding to this port. By default, this objects contains a zero value.
alaMvrpPortRestrictVlanConfig	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.9
alaMvrpPortRestrictVlanConfigTable	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.9.1		not-accessible	A table containing MVRP port restrict VLAN configuration information.
alaMvrpPortRestrictVlanConfigEntry	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.9.1.1		not-accessible	A MVRP port restrict VLAN configuration entry.
NUM alaMvrpPortRestrictVlanIfIndex	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.9.1.1.1	InterfaceIndex	not-accessible	The ifindex of the port on which MVRP is running
VLA alaMvrpPortRestrictVlanID	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.9.1.1.2	VlanId	not-accessible	An integer indicating VLAN-ID.
MVR alaMvrpPortVlanRestrictions	1.3.6.1.4.1.6486.801.1.2.1.62.1.1.9.1.1.3	MvrpPortVlanRestrictBitmap	read-write	The bitmap includes the status value for different type of restrictions that could be applied for a port VLAN combination. Each bit in the bitmap corresponds to the status of a particular restriction applied for a VLAN on the port. If the bit is set, the particular restriction is enabled for the VLAN port combination. Having the bit 'noRestriction(0)' set indicates that the no restriction is applied for the VLAN on the port. No other option can be applied along with this option. Having the bit 'restrictRegistration(1)' set indicates that the VLAN is restricted from getting registered on the port. Having the bit 'restrictAdvertisement(2)' set indicates that the advertisement for the VLAN is restricted on the port. Having the bit 'restrictStaticVlanRegistration(3)' set indicates that the registration on a port for a static VLAN is restricted.
alcatelIND1MVRPMIBConformance	1.3.6.1.4.1.6486.801.1.2.1.62.1.2			Branch for MVRP Module MIB Subsystem Conformance Information.
alcatelIND1MVRPMIBGroups	1.3.6.1.4.1.6486.801.1.2.1.62.1.2.1			Branch for MVRP Module MIB Subsystem Units of Conformance.
alaMvrpBaseGroup	1.3.6.1.4.1.6486.801.1.2.1.62.1.2.1.1			Collection of objects for management of MVRP Base Group.
alaMvrpPortConfigGroup	1.3.6.1.4.1.6486.801.1.2.1.62.1.2.1.2			Collection of objects for management of MVRP Port Configuration Table.
alaMvrpPortStatsGroup	1.3.6.1.4.1.6486.801.1.2.1.62.1.2.1.3			Collection of objects for management of MVRP Statistics Table.
alaMvrpPortRestrictVlanConfigGroup	1.3.6.1.4.1.6486.801.1.2.1.62.1.2.1.4			Collection of objects for management of MVRP Port Restrict VLAN Configuration Table.
alaIND1MvrpNotificationGroup	1.3.6.1.4.1.6486.801.1.2.1.62.1.2.1.5			Collection of notifications for MVRP.
alcatelIND1MVRPMIBCompliances	1.3.6.1.4.1.6486.801.1.2.1.62.1.2.2			Branch for MVRP Module MIB Subsystem Compliance Statements.
alcatelIND1MVRPMIBCompliance	1.3.6.1.4.1.6486.801.1.2.1.62.1.2.2.1			Compliance statement for MVRP.

RFC description

Alcatel-Lucent Birds of Prey Multiple VLAN Registration Protocol for dynamic VLAN configuration distribution in bridged networks.

Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALCATEL-IND1-MVRP-MIB