ALCATEL-IND1-ISIS-SPB-MIB :: alcatelIND1IsisSpbSysControlAddr

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsALCATEL-IND1-ISIS-SPB-MIBalcatelIND1IsisSpbSysControlAddr

alcatelIND1IsisSpbSysControlAddr

Module: ALCATEL-IND1-ISIS-SPB-MIB

OID (symbolic): ALCATEL-IND1-ISIS-SPB-MIB::alcatelIND1IsisSpbSysControlAddr

OID (numeric): 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.5

Node type: OBJECT-TYPE

Type: MacAddress

Access: read-write

Description: Group MAC that the ISIS control plane will use. SPB may use a number of different addresses for SPB Hello and LSP exchange. Section 27.2, 8.13.1.5 and Table 8-13 covers the different choices. The choices are as follows: 01-80-C2-00-00-14 = All Level 1 Intermediate Systems 01-80-C2-00-00-15 = All Level 2 Intermediate Systems 09-00-2B-00-00-05 = All Intermediate Systems. 01-80-xx-xx-xx-xx = All Provider Bridge Intermediate Systems. 01-80-yy-yy-yy-yy = All Customer Bridge Intermediate Systems. This object is persistent. cf. ieee8021SpbSysControlAddr

What is alcatelIND1IsisSpbSysControlAddr?

Configures the group MAC address that the IS-IS SPB control plane uses for sending Hello messages and LSP exchanges between SPB bridges. Different address choices affect how control traffic is handled at the data-link layer according to IEEE 802.1 specifications.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.5
snmpwalk -v2c -c public <target> ALCATEL-IND1-ISIS-SPB-MIB::alcatelIND1IsisSpbSysControlAddr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.5.1
snmpget -v2c -c public <target> ALCATEL-IND1-ISIS-SPB-MIB::alcatelIND1IsisSpbSysControlAddr.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.5.1 s <value>

Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ALCATEL-IND1-ISIS-SPB-MIB::alcatelIND1IsisSpbSysControlAddr OID value, configure state conditions and alerts, and monitor any Alcatel-Lucent Enterprise OmniSwitch switches from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6486alcatelALCATEL-IND1-BASE
1.3.6.1.4.1.6486.801alcatelIND1BaseMIBALCATEL-IND1-BASE
1.3.6.1.4.1.6486.801.1alcatelIND1ManagementALCATEL-IND1-BASE
1.3.6.1.4.1.6486.801.1.2managementIND1SoftwareALCATEL-IND1-BASE
1.3.6.1.4.1.6486.801.1.2.1softwareIND1EntitiesALCATEL-IND1-BASE
1.3.6.1.4.1.6486.801.1.2.1.10softentIND1RoutingALCATEL-IND1-BASE
1.3.6.1.4.1.6486.801.1.2.1.10.17routingIND1IsisSpbALCATEL-IND1-BASE
Numeric OIDNameModule
1.3.6.1.4.1.6486.801.1.2.1.10.17.1alcatelIND1IsisSpbMibALCATEL-IND1-ISIS-SPB-MIB
1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1alcatelIND1IsisSpbMibObjectsALCATEL-IND1-ISIS-SPB-MIB
1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1alcatelIND1IsisSpbSysALCATEL-IND1-ISIS-SPB-MIB
1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.5alcatelIND1IsisSpbSysControlAddrALCATEL-IND1-ISIS-SPB-MIB