ALCATEL-IND1-IPM-VLAN-MIB

All MIBs › ALCATEL-IND1-IPM-VLAN-MIB

Organization: ALCATEL - Architects Of An Internet World

Last Updated: 2007-07-02

Category: IP and Core Protocols, Vendor: Alcatel-Lucent

Description: Alcatel OmniSwitch IP multicast VLAN MIB for managing multicast VLAN replication and group-to-VLAN binding.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALCATEL-IND1-IPM-VLAN-MIB?

ALCATEL-IND1-IPM-VLAN-MIB is an Alcatel-Lucent OmniSwitch proprietary MIB for the IPM (IP Multicast) VLAN feature, which associates ports and IP addresses with dedicated multicast VLANs for efficient multicast replication. It exposes per-port IPM VLAN membership (alaipmvVlanPortTable), IP-address-to-VLAN bindings (alaipmvVlanIpAddrTable) including address type and row status, and C-tag mapping (alaipmvVlanCtagTable) for the multicast VLAN. Monitoring-wise it is a software/configuration MIB: operators use it to confirm that ports are correctly bound to the intended IPM VLAN and that IP-to-VLAN associations remain active, important for diagnosing multicast video/IPTV delivery problems. It builds on standard VLAN and multicast concepts rather than introducing a new external standard. It is typically deployed on OmniSwitch access/aggregation switches delivering IPTV or multicast video services to subscribers, where ALCATEL-IND1-IPM-VLAN-MIB SNMP monitoring confirms multicast VLAN bindings stay correctly assigned.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-IPM-VLAN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alcatel-Lucent OmniSwitch access/aggregation switches

Monitoring Examples

An operator would poll alaipmvVlanPortTable/alaipmvVlanPortEntry to confirm alaipmvVlanPortIPMVlanNumber for a subscriber-facing port matches the expected multicast VLAN, and check alaipmvVlanIpAddrTable for the associated alaipmvVlanIpAddress and alaipmvVlanIpAddrRowStatus. A row status showing not-in-service or an unexpected IPM VLAN number on a port would explain why multicast/IPTV traffic is not reaching a given subscriber. Walking alaipmvVlanCtagTable would additionally confirm the C-tag used for that multicast VLAN matches the access network's configuration.

What Can Be Monitored

port-to-IPM-VLAN binding
IP address to VLAN association
row/entry status of multicast VLAN bindings
C-tag mapping

Imported Objects

From ALCATEL-IND1-BASE

softentIND1IPMVlanMgt

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From INET-ADDRESS-MIB

InetAddress
InetAddressPrefixLength
InetAddressType

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
alcatelIND1IPMVlanMIB	1.3.6.1.4.1.6486.801.1.2.1.41.1			The parameters for configuration of the IPM Vlan feature, including the association between ports and ipaddresses with vlans. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
alcatelIND1IPMVlanMIBObjects	1.3.6.1.4.1.6486.801.1.2.1.41.1.1			Branch For IPM Vlan Managed Objects.
alaipmvVlanPort	1.3.6.1.4.1.6486.801.1.2.1.41.1.1.1
alaipmvVlanPortTable	1.3.6.1.4.1.6486.801.1.2.1.41.1.1.1.1		not-accessible	A table that contains port specific information for the IP Multicast VLAN. An entry is this table is created when a port is configured as a receiver / sender port for a IPMVLAN.
alaipmvVlanPortEntry	1.3.6.1.4.1.6486.801.1.2.1.41.1.1.1.1.1		not-accessible	A IPMV Port entry.
INT alaipmvVlanPortIPMVlanNumber	1.3.6.1.4.1.6486.801.1.2.1.41.1.1.1.1.1.1	INTEGER	read-only	The VLAN number component of this IPMVLAN instance. Valid range from 2 to 4094.
NUM alaipmvVlanPortNumber	1.3.6.1.4.1.6486.801.1.2.1.41.1.1.1.1.1.2	InterfaceIndex	read-only	The port ifindex of the port which is associated to the IPMVLAN.
INT alaipmvVlanPortType	1.3.6.1.4.1.6486.801.1.2.1.41.1.1.1.1.1.3	INTEGER	read-only	The type of this port associated to the IPMVLAN. receiverPort(1) is the receiver port associated to the IPMVLAN, senderPort(2) is the sender port associated to the IPMVLAN. In the VLAN Stacking environment, these ports are the VLAN Stacking ports. Configuration of IPMVLAN logical/physical receiver port on multiple IPMVlans, that are associated with same IPv4/IPv6 multicast group addresses are not allowed.
ROW alaipmvVlanPortRowStatus	1.3.6.1.4.1.6486.801.1.2.1.41.1.1.1.1.1.4	RowStatus	read-create	The status of this table entry. The values supported are CreateAndGo(4) and destroy(6), to create or delete the port as a receiver / sender port in an IPMVLAN. Of course the corresponding vlan and port must exist.
alaipmvVlanIpAddr	1.3.6.1.4.1.6486.801.1.2.1.41.1.1.2
alaipmvVlanIpAddrTable	1.3.6.1.4.1.6486.801.1.2.1.41.1.1.2.1		not-accessible	A list of IP addresses assigned to an IPMVLAN.
alaipmvVlanIpAddrEntry	1.3.6.1.4.1.6486.801.1.2.1.41.1.1.2.1.1		not-accessible	A IPMVLAN IP address entry.
INT alaipmvVlanIpAddrVlanNumber	1.3.6.1.4.1.6486.801.1.2.1.41.1.1.2.1.1.1	INTEGER	read-only	The VLAN number component of this IPMVLAN instance. Valid range from 2 to 4094.
IPt alaipmvVlanIpAddrType	1.3.6.1.4.1.6486.801.1.2.1.41.1.1.2.1.1.2	InetAddressType	read-only	The IP address type.
IP alaipmvVlanIpAddress	1.3.6.1.4.1.6486.801.1.2.1.41.1.1.2.1.1.3	InetAddress	read-only	The Multicast IP address based on the address type. This IP multicast group address can be associated to multiple IPMVLANs. Configuration of IPv4/IPv6 Multicast Group address on multiple IPMVlans, that are associated with same physical/logical receiver ports are not allowed.
ROW alaipmvVlanIpAddrRowStatus	1.3.6.1.4.1.6486.801.1.2.1.41.1.1.2.1.1.4	RowStatus	read-create	This is used to create or delete the Multicast IP address in an IPMVLAN. Of course the corresponding vlan must exist.
alaipmvVlanIpAddrMaskTable	1.3.6.1.4.1.6486.801.1.2.1.41.1.1.2.2		not-accessible	A list of IP addresses assigned to an IPMVLAN.
alaipmvVlanIpAddrMaskEntry	1.3.6.1.4.1.6486.801.1.2.1.41.1.1.2.2.1		not-accessible	A IPMVLAN IP address entry.
INT alaipmvVlanIpAddrMaskVlanNumber	1.3.6.1.4.1.6486.801.1.2.1.41.1.1.2.2.1.1	INTEGER	not-accessible	The VLAN number component of this IPMVLAN instance. Valid range from 2 to 4094.
IPt alaipmvVlanIpAddrMaskType	1.3.6.1.4.1.6486.801.1.2.1.41.1.1.2.2.1.2	InetAddressType	not-accessible	The IP address type.The allowed values are ipv4(1) and ipv6(2).
IP alaipmvVlanIpAddrMaskAddress	1.3.6.1.4.1.6486.801.1.2.1.41.1.1.2.2.1.3	InetAddress	not-accessible	The Multicast IP address based on the address type indicated by alaipmvVlanIpAddrMaskType. This IP multicast group address can be associated to multiple IPMVLANs. alaipmvVlanIpAddrMaskPrefixLen is used to specify a mask. The host bits of the address should be zero.
ADR alaipmvVlanIpAddrMaskPrefixLen	1.3.6.1.4.1.6486.801.1.2.1.41.1.1.2.2.1.4	InetAddressPrefixLength	not-accessible	The Multicast IP address-mask length based on the address type. It must be 0-32 for alaipmvVlanIpAddrMaskType ipv4 and 128 for alaipmvVlanIpAddrMaskType ipv6. The host bits of the address alaipmvVlanIpAddrMaskAddress should be zero.
ROW alaipmvVlanIpAddrMaskRowStatus	1.3.6.1.4.1.6486.801.1.2.1.41.1.1.2.2.1.5	RowStatus	read-create	This is used to create or delete the Multicast IP address in an IPMVLAN. Of course the corresponding vlan must exist.
alaipmvVlanCtagT	1.3.6.1.4.1.6486.801.1.2.1.41.1.1.3
alaipmvVlanCtagTable	1.3.6.1.4.1.6486.801.1.2.1.41.1.1.3.1		not-accessible	A table that contains ipmvlan-ctag association for the IPMV feature.
alaipmvVlanCtagEntry	1.3.6.1.4.1.6486.801.1.2.1.41.1.1.3.1.1		not-accessible	A IPMVLAN-Ctag entry.
INT alaipmvVlanNumber	1.3.6.1.4.1.6486.801.1.2.1.41.1.1.3.1.1.1	INTEGER	read-only	The VLAN number component of this IPMVLAN instance. Valid range from 2 to 4094.
INT alaipmvVlanCtag	1.3.6.1.4.1.6486.801.1.2.1.41.1.1.3.1.1.2	INTEGER	read-only	The customer vlan id associated to the IPMVLAN. This customer vlan id is unique and can't be associated to more than one IPM Vlan
ROW alaipmvVlanCtagRowStatus	1.3.6.1.4.1.6486.801.1.2.1.41.1.1.3.1.1.3	RowStatus	read-create	The status of this table entry. The supported value for set are createAndGo (4) and destroy(6), to add or remove an IPMVLAN-ctag association.
alaipmvVlanIpAddrMask	1.3.6.1.4.1.6486.801.1.2.1.41.1.1.4
alcatelIND1IPMVlanMIBConformance	1.3.6.1.4.1.6486.801.1.2.1.41.1.2			Branch For IPM Vlan Conformance Information.
alcatelIND1IPMVlanMIBGroups	1.3.6.1.4.1.6486.801.1.2.1.41.1.2.1			Branch For IPM Vlan Units Of Conformance.
alaipmvlanPortGroup	1.3.6.1.4.1.6486.801.1.2.1.41.1.2.1.1			Collection of objects for management of IPM Vlan Ports.
alaipmvlanIPAddressGroup	1.3.6.1.4.1.6486.801.1.2.1.41.1.2.1.2			Collection of objects for management of IPM Vlan Address.
alaipmvlanCtagGroup	1.3.6.1.4.1.6486.801.1.2.1.41.1.2.1.3			Collection of objects for management of IPM Vlan Address.
alaipmvlanIPAddrMaskGroup	1.3.6.1.4.1.6486.801.1.2.1.41.1.2.1.4			Collection of objects for management of IPM Vlan Address.
alcatelIND1IPMVlanMIBCompliances	1.3.6.1.4.1.6486.801.1.2.1.41.1.2.2			Branch For IPM Vlan Compliance Statements.
alcatelIND1IPMVlanMIBCompliance	1.3.6.1.4.1.6486.801.1.2.1.41.1.2.2.1			Compliance statement for IPM Vlan.

RFC description

Manages IP VLAN configuration and port-to-VLAN associations for Alcatel switches.

Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALCATEL-IND1-IPM-VLAN-MIB

What Is ALCATEL-IND1-IPM-VLAN-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description