All MIBs › ALCATEL-IND1-IP-MIB › alaIpServiceStatus
alaIpServiceStatus
Module: ALCATEL-IND1-IP-MIB
OID (symbolic): ALCATEL-IND1-IP-MIB::alaIpServiceStatus
OID (numeric): 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.12.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: When read, returns enabled if service and port are enabled, and returns disabled otherwise. When written, enables/disables service and port (although snmp is never fully shut down; if disabled in some VRF, it will run in the default VRF). Note that that http, https, and ntp here are read-only; use alternatives described below to enable/disable service. If you want to block packet and shut down service, use corresponding MIB attribute below: - ftp : alaIpFtpAdminStatus from alaIpFtpConfig in ALCATEL-IND1-IP-MIB.mib - ssh : alaIpSshAdminStatus from alaIpSshConfig in ALCATEL-IND1-IP-MIB.mib - telnet : alaIpTelnetAdminStatus from alaIpTelnetConfig in ALCATEL-IND1-IP-MIB.mib - http enable : alaIND1WebMgtAdminStatus from alcatelIND1WebMgtMIBObjects in ALCATEL-IND1-WEBMGT-MIB.mib - http disable : alaIND1WebMgtServerStatus from alcatelIND1WebMgtMIBObjects in ALCATEL-IND1-WEBMGT-MIB.mib - ntp : alaIpNtpVrfName (in this mib), and alaNtpEnable and alaNtpBroadcastEnable from alaNtpConfig in ALCATEL-IND1-NTP-MIB.mib - snmp : [no alternative -- use this MIB object] - https : same as http
What is alaIpServiceStatus?
Controls whether a specific IP management service and its associated port are enabled or disabled on the switch. Note that SNMP cannot be fully disabled — if disabled in a VRF it falls back to the default VRF — and services such as HTTP, HTTPS, and certain others may have additional constraints.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.12.1.3 snmpwalk -v2c -c public <target> ALCATEL-IND1-IP-MIB::alaIpServiceStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.12.1.3.1 snmpget -v2c -c public <target> ALCATEL-IND1-IP-MIB::alaIpServiceStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.12.1.3.1 i <value>
Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ALCATEL-IND1-IP-MIB::alaIpServiceStatus OID value, configure state conditions and alerts, and monitor any Alcatel-Lucent Enterprise OmniSwitch switches from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6486 | alcatel | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801 | alcatelIND1BaseMIB | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1 | alcatelIND1Management | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1.2 | managementIND1Software | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1.2.1 | softwareIND1Entities | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1.2.1.23 | softentIND1Ip | ALCATEL-IND1-BASE |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6486.801.1.2.1.23.1 | alcatelIND1IPMIB | ALCATEL-IND1-IP-MIB |
| 1.3.6.1.4.1.6486.801.1.2.1.23.1.1 | alcatelIND1IPMIBObjects | ALCATEL-IND1-IP-MIB |
| 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.12 | alaIpServiceTable | ALCATEL-IND1-IP-MIB |
| 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.12.1 | alaIpServiceEntry | ALCATEL-IND1-IP-MIB |
| 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.12.1.3 | alaIpServiceStatus | ALCATEL-IND1-IP-MIB |