ADTRAN-AOS-NETWORKMONITOR

All MIBs › ADTRAN-AOS-NETWORKMONITOR

Organization: ADTRAN, Inc.

Last Updated: 2010-10-27

Category: Network Monitoring (RMON), Vendor: ADTRAN

Description: Provides network monitoring and probing capabilities on ADTRAN AOS devices for SLA measurement and fault detection.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ADTRAN-AOS-NETWORKMONITOR?

This MIB module belongs to ADTRAN's AOS platform and supports the built-in network monitoring/probing subsystem used for active service-level measurement and fault detection. It is expected to expose configuration and results for network-monitor probes that test reachability, latency, or path health toward configured targets. Rather than device hardware health, it centers on monitoring the software-level health of network paths and services traversing the device -- probe status, test results, and threshold or failure events. As part of the ADTRAN AOS enterprise MIB family, it likely depends on companion AOS MIBs (such as interface and system MIBs) for context on which interface or IP address a probe is associated with. It is typically deployed on ADTRAN routers and access devices used for WAN SLA verification and proactive fault detection in enterprise or carrier access networks. Engineers can download the ADTRAN-AOS-NETWORKMONITOR file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ADTRAN-AOS-NETWORKMONITOR. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ADTRAN AOS router/access device

Monitoring Examples

No sample object or table names were provided for this module, so a concrete polling scenario using real object names cannot be given with confidence; the module description only confirms it holds "network monitoring information," and specific probe/test object names would need to be confirmed against the compiled MIB.

What Can Be Monitored

network probe/test status
probe reachability and latency results
SLA threshold breach events

Imported Objects

From ADTRAN-AOS

adGenAOSConformance	OBJECT-IDENTITY
adGenAOSRouter	OBJECT-IDENTITY

From ADTRAN-MIB

adIdentity

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using adGenAOSnmTestsRun OID:

Select an ADTRAN NetVanta/SDG-series AOS device as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type adGenAOSnmTestsRun into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the number of test run on the probe. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
adGenAOSNetMon	1.3.6.1.4.1.664.5.53.2.2
adGenAOSNetMonMib	1.3.6.1.4.1.664.6.10000.53.2.2			This MIB contains network monitoring information.
INT adGenAOSnmAdminStatus	1.3.6.1.4.1.664.5.53.2.2.3.1.2	INTEGER	read-write	Specifies ability to enable or disable the probe.
OCT adGenAOSnmCfgICMPTSName	1.3.6.1.4.1.664.5.53.2.2.7.1.1	OCTET STRING	read-only	The name of the corresponding ICMP timestamp probe entry. The probe identified by a particular value of this object is the same probe as identified by the same value as a adGenAOSnmName object instance.
adGenAOSnmCfgICMPTSProbeEntry	1.3.6.1.4.1.664.5.53.2.2.7.1		not-accessible	The parameters used to configure a particular network monitor ICMP timestamp probe.
adGenAOSnmCfgICMPTSProbeGroup	1.3.6.1.4.1.664.5.53.99.7.1.7			The objects necessary to configure the network monitor ICMP timestamp probe.
adGenAOSnmCfgICMPTSProbeTable	1.3.6.1.4.1.664.5.53.2.2.7		not-accessible	Configure a network monitor ICMP timestamp probe.
OCT adGenAOSnmCfgIEName	1.3.6.1.4.1.664.5.53.2.2.13.1.1	OCTET STRING	read-only	The name of the corresponding ICMP echo probe entry. The probe identified by a particular value of this object is the same probe as identified by the same value as a adGenAOSnmName object instance.
adGenAOSnmCfgIEProbeEntry	1.3.6.1.4.1.664.5.53.2.2.13.1		not-accessible	The parameters used to configure a particular network monitor ICMP echo probe.
adGenAOSnmCfgIEProbeGroup	1.3.6.1.4.1.664.5.53.99.7.1.13			Objects designed to assist in configuring the ICMP echo probe.
adGenAOSnmCfgIEProbeTable	1.3.6.1.4.1.664.5.53.2.2.13		not-accessible	Configure a network monitor ICMP echo probe.
OCT adGenAOSnmCfgName	1.3.6.1.4.1.664.5.53.2.2.3.1.1	OCTET STRING	read-only	The name of the corresponding probe entry. The probe identified by a particular value of this index is the same probe as identified by the same value as a adGenAOSnmName object instance.
adGenAOSnmCfgTwampProbeEntry	1.3.6.1.4.1.664.5.53.2.2.5.1		not-accessible	The parameters used to configure a particular network monitor TWAMP probe.
adGenAOSnmCfgTwampProbeGroup	1.3.6.1.4.1.664.5.53.99.7.1.5			The objects necessary to configure the network monitor TWAMP probe.
adGenAOSnmCfgTwampProbeTable	1.3.6.1.4.1.664.5.53.2.2.5		not-accessible	Configure a network monitor TWAMP probe.
OCT adGenAOSnmCfgTwName	1.3.6.1.4.1.664.5.53.2.2.5.1.1	OCTET STRING	read-only	The name of the corresponding TWAMP probe entry. The probe identified by a particular instance of this object is the same probe as identified by the same value as a adGenAOSnmName object instance.
INT adGenAOSnmClearCounters	1.3.6.1.4.1.664.5.53.2.2.3.1.9	INTEGER	read-write	Clear the counters and statistics history of a probe. This is a write-only variable. A read will result in no action being taken.
INT adGenAOSnmClearICMPTSResponderCounters	1.3.6.1.4.1.664.5.53.2.2.11.1.4	INTEGER	read-write	Clear the counters of the ICMP timestamp responder. This is a write-only variable. A read will result in no action being taken.
INT adGenAOSnmClearTwampResponderCounters	1.3.6.1.4.1.664.5.53.2.2.12.1.7	INTEGER	read-write	Clear the counters of the TWAMP responder. This is a write-only variable. A read will result in no action being taken.
adGenAOSnmCompliances	1.3.6.1.4.1.664.5.53.99.7.2
adGenAOSnmConfigProbeEntry	1.3.6.1.4.1.664.5.53.2.2.3.1		not-accessible	The parameters used to configure a particular network monitor probe.
adGenAOSnmConfigProbeGroup	1.3.6.1.4.1.664.5.53.99.7.1.3			The objects necessary to configure the network monitor probe.
adGenAOSnmConfigProbeTable	1.3.6.1.4.1.664.5.53.2.2.3		not-accessible	Configure a network monitor probe.
adGenAOSnmConformance	1.3.6.1.4.1.664.5.53.99.7
INT adGenAOSnmFailTolerance	1.3.6.1.4.1.664.5.53.2.2.3.1.6	INTEGER	read-write	Specifies how many probe operations must fail before the probe state transitions to the fail state.
adGenAOSnmFullCompliance	1.3.6.1.4.1.664.5.53.99.7.2.1			The compliance statement for SNMP entities which implement version 2 of the adGenAOSNetMon MIB. When this MIB is implemented with support for read-create, then such an implementation can claim full compliance. Network Monitor probes can then be both monitored and configured with this MIB. No more than 10 rows can be created in the adGenAOSnmProbeTable at this time. Attempting to create more than this value will return an error.
adGenAOSnmGroups	1.3.6.1.4.1.664.5.53.99.7.1
INT adGenAOSnmICMPTSDataPadType	1.3.6.1.4.1.664.5.53.2.2.7.1.8	INTEGER	read-write	Specifies how the ICMP padding paylod is filled.
I32 adGenAOSnmICMPTSDelayInAvgFail	1.3.6.1.4.1.664.5.53.2.2.7.1.31	Integer32	read-write	Specifies the average inbound delay threshold in milliseconds that will cause the probe operation to fail.
I32 adGenAOSnmICMPTSDelayInAvgPass	1.3.6.1.4.1.664.5.53.2.2.7.1.34	Integer32	read-write	Specifies the threshold in milliseconds for average inbound delay that will allow the probe operation to pass.
I32 adGenAOSnmICMPTSDelayInMax	1.3.6.1.4.1.664.5.53.2.2.8.1.6	Integer32	read-only	The inbound maximum delay in milliseconds.
I32 adGenAOSnmICMPTSDelayInMaxFail	1.3.6.1.4.1.664.5.53.2.2.7.1.32	Integer32	read-write	Specifies the maximum inbound delay threshold in milliseconds that will cause the probe operation to fail.
I32 adGenAOSnmICMPTSDelayInMaxPass	1.3.6.1.4.1.664.5.53.2.2.7.1.35	Integer32	read-write	Specifies the threshold in milliseconds for maximum inbound delay that will allow the probe operation to pass.
I32 adGenAOSnmICMPTSDelayInMin	1.3.6.1.4.1.664.5.53.2.2.8.1.5	Integer32	read-only	The inbound minimum delay in milliseconds.
I32 adGenAOSnmICMPTSDelayInMinFail	1.3.6.1.4.1.664.5.53.2.2.7.1.30	Integer32	read-write	Specifies the minimum inbound delay threshold in milliseconds that will cause the probe operation to fail.
I32 adGenAOSnmICMPTSDelayInMinPass	1.3.6.1.4.1.664.5.53.2.2.7.1.33	Integer32	read-write	Specifies the threshold in milliseconds for minimum inbound delay that will allow the probe operation to pass.
C32 adGenAOSnmICMPTSDelayInNum	1.3.6.1.4.1.664.5.53.2.2.8.1.17	Counter32	read-only	The number of individual inbound delay samples.
I32 adGenAOSnmICMPTSDelayInSum	1.3.6.1.4.1.664.5.53.2.2.8.1.15	Integer32	read-only	The sum of inbound delay in milliseconds.
C64 adGenAOSnmICMPTSDelayInSum2	1.3.6.1.4.1.664.5.53.2.2.8.1.16	Counter64	read-only	The sum of the squares of inbound delay in milliseconds.
I32 adGenAOSnmICMPTSDelayOutAvgFail	1.3.6.1.4.1.664.5.53.2.2.7.1.37	Integer32	read-write	Specifies the average outbound delay threshold in milliseconds that will cause the probe operation to fail.
I32 adGenAOSnmICMPTSDelayOutAvgPass	1.3.6.1.4.1.664.5.53.2.2.7.1.40	Integer32	read-write	Specifies the threshold in milliseconds for average outbound delay that will allow the probe operation to pass.
I32 adGenAOSnmICMPTSDelayOutMax	1.3.6.1.4.1.664.5.53.2.2.8.1.8	Integer32	read-only	The outbound maximum delay in milliseconds.
I32 adGenAOSnmICMPTSDelayOutMaxFail	1.3.6.1.4.1.664.5.53.2.2.7.1.38	Integer32	read-write	Specifies the maximum outbound delay threshold in milliseconds that will cause the probe operation to fail.
I32 adGenAOSnmICMPTSDelayOutMaxPass	1.3.6.1.4.1.664.5.53.2.2.7.1.41	Integer32	read-write	Specifies the threshold in milliseconds for maximum outbound delay that will allow the probe operation to pass.
I32 adGenAOSnmICMPTSDelayOutMin	1.3.6.1.4.1.664.5.53.2.2.8.1.7	Integer32	read-only	The outbound minimum delay in milliseconds.
I32 adGenAOSnmICMPTSDelayOutMinFail	1.3.6.1.4.1.664.5.53.2.2.7.1.36	Integer32	read-write	Specifies the minimum outbound delay threshold in milliseconds that will cause the probe operation to fail.
I32 adGenAOSnmICMPTSDelayOutMinPass	1.3.6.1.4.1.664.5.53.2.2.7.1.39	Integer32	read-write	Specifies the threshold in milliseconds for minimum outbound delay that will allow the probe operation to pass.
C32 adGenAOSnmICMPTSDelayOutNum	1.3.6.1.4.1.664.5.53.2.2.8.1.14	Counter32	read-only	The number of individual outbound delay samples.
I32 adGenAOSnmICMPTSDelayOutSum	1.3.6.1.4.1.664.5.53.2.2.8.1.12	Integer32	read-only	The sum of outbound delay in milliseconds.
C64 adGenAOSnmICMPTSDelayOutSum2	1.3.6.1.4.1.664.5.53.2.2.8.1.13	Counter64	read-only	The sum of the squares of outbound delay in milliseconds.
I32 adGenAOSnmICMPTSDelayRtAvgFail	1.3.6.1.4.1.664.5.53.2.2.7.1.43	Integer32	read-write	Specifies the average round-trip delay threshold in milliseconds that will cause the probe operation to fail.
I32 adGenAOSnmICMPTSDelayRtAvgPass	1.3.6.1.4.1.664.5.53.2.2.7.1.46	Integer32	read-write	Specifies the threshold in milliseconds for average round-trip delay that will allow the probe operation to pass.
I32 adGenAOSnmICMPTSDelayRtMax	1.3.6.1.4.1.664.5.53.2.2.8.1.10	Integer32	read-only	The round-trip maximum delay in milliseconds.
I32 adGenAOSnmICMPTSDelayRtMaxFail	1.3.6.1.4.1.664.5.53.2.2.7.1.44	Integer32	read-write	Specifies the maximum round-trip delay threshold in milliseconds that will cause the probe operation to fail.
I32 adGenAOSnmICMPTSDelayRtMaxPass	1.3.6.1.4.1.664.5.53.2.2.7.1.47	Integer32	read-write	Specifies the threshold in milliseconds for maximum round-trip delay that will allow the probe operation to pass.
I32 adGenAOSnmICMPTSDelayRtMin	1.3.6.1.4.1.664.5.53.2.2.8.1.9	Integer32	read-only	The round-trip minimum delay in milliseconds.
I32 adGenAOSnmICMPTSDelayRtMinFail	1.3.6.1.4.1.664.5.53.2.2.7.1.42	Integer32	read-write	Specifies the minimum round-trip delay threshold in milliseconds that will cause the probe operation to fail.
I32 adGenAOSnmICMPTSDelayRtMinPass	1.3.6.1.4.1.664.5.53.2.2.7.1.45	Integer32	read-write	Specifies the threshold in milliseconds for minimum round-trip delay that will allow the probe operation to pass.
C32 adGenAOSnmICMPTSDelayRtNum	1.3.6.1.4.1.664.5.53.2.2.8.1.20	Counter32	read-only	The number of individual round-trip delay samples.
I32 adGenAOSnmICMPTSDelayRtSum	1.3.6.1.4.1.664.5.53.2.2.8.1.18	Integer32	read-only	The sum of round-trip delay in milliseconds.
C64 adGenAOSnmICMPTSDelayRtSum2	1.3.6.1.4.1.664.5.53.2.2.8.1.19	Counter64	read-only	The sum of the squares of round-trip delay in milliseconds.
STR adGenAOSnmICMPTSDestHostname	1.3.6.1.4.1.664.5.53.2.2.7.1.2	DisplayString	read-write	Specifies the destination hostname or IP address as a string in dotted decimal format.
INT adGenAOSnmICMPTSDscp	1.3.6.1.4.1.664.5.53.2.2.7.1.4	INTEGER	read-write	Specifies the DiffServ Code Point value that will be used on packets sent and will be negotiated with the responder.
STR adGenAOSnmICMPTSEndTime	1.3.6.1.4.1.664.5.53.2.2.8.1.4	DisplayString	read-only	The date and time the probe operation ended.
INT adGenAOSnmICMPTSHistoryDepth	1.3.6.1.4.1.664.5.53.2.2.7.1.50	INTEGER	read-write	Specifies the number of probe operation statistic results to keep.
adGenAOSnmICMPTSHistoryEntry	1.3.6.1.4.1.664.5.53.2.2.8.1		not-accessible	The read-only history of a particular network monitor ICMP timestamp probe.
adGenAOSnmICMPTSHistoryGroup	1.3.6.1.4.1.664.5.53.99.7.1.8			Objects designed to assist in retrieving the statistics of the ICMP timestamp probe.
OCT adGenAOSnmICMPTSHistoryName	1.3.6.1.4.1.664.5.53.2.2.8.1.2	OCTET STRING	read-only	The name of the corresponding ICMP timestamp probe entry. The probe identified by a particular value of this object is the same probe as identified by the same value as a adGenAOSnmName object instance.
adGenAOSnmICMPTSHistoryTable	1.3.6.1.4.1.664.5.53.2.2.8		not-accessible	Operation history for a network monitor ICMP timestamp probe.
U32 adGenAOSnmICMPTSIpdvAbsInAvgFail	1.3.6.1.4.1.664.5.53.2.2.7.1.13	Unsigned32	read-write	Specifies the average inbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
U32 adGenAOSnmICMPTSIpdvAbsInAvgPass	1.3.6.1.4.1.664.5.53.2.2.7.1.16	Unsigned32	read-write	Specifies the threshold in milliseconds for average inbound absolute-value inter-packet delay variation that will allow the probe operation to pass.
U32 adGenAOSnmICMPTSIpdvAbsInMaxFail	1.3.6.1.4.1.664.5.53.2.2.7.1.14	Unsigned32	read-write	Specifies the maximum inbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
U32 adGenAOSnmICMPTSIpdvAbsInMaxPass	1.3.6.1.4.1.664.5.53.2.2.7.1.17	Unsigned32	read-write	Specifies the threshold in milliseconds for maximum inbound absolute-value inter-packet delay variation that will allow the probe operation to pass.
U32 adGenAOSnmICMPTSIpdvAbsInMinFail	1.3.6.1.4.1.664.5.53.2.2.7.1.12	Unsigned32	read-write	Specifies the minimum inbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
U32 adGenAOSnmICMPTSIpdvAbsInMinPass	1.3.6.1.4.1.664.5.53.2.2.7.1.15	Unsigned32	read-write	Specifies the threshold in milliseconds for minimum inbound absolute-value inter-packet delay variation that will allow the probe operation to pass.
U32 adGenAOSnmICMPTSIpdvAbsOutAvgFail	1.3.6.1.4.1.664.5.53.2.2.7.1.19	Unsigned32	read-write	Specifies the average outbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
U32 adGenAOSnmICMPTSIpdvAbsOutAvgPass	1.3.6.1.4.1.664.5.53.2.2.7.1.22	Unsigned32	read-write	Specifies the threshold in milliseconds for average outbound absolute-value inter-packet delay variation that will allow the probe operation to pass.
U32 adGenAOSnmICMPTSIpdvAbsOutMaxFail	1.3.6.1.4.1.664.5.53.2.2.7.1.20	Unsigned32	read-write	Specifies the maximum outbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
U32 adGenAOSnmICMPTSIpdvAbsOutMaxPass	1.3.6.1.4.1.664.5.53.2.2.7.1.23	Unsigned32	read-write	Specifies the threshold in milliseconds for maximum outbound absolute-value inter-packet delay variation that will allow the probe operation to pass.
U32 adGenAOSnmICMPTSIpdvAbsOutMinFail	1.3.6.1.4.1.664.5.53.2.2.7.1.18	Unsigned32	read-write	Specifies the minimum outbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
U32 adGenAOSnmICMPTSIpdvAbsOutMinPass	1.3.6.1.4.1.664.5.53.2.2.7.1.21	Unsigned32	read-write	Specifies the threshold in milliseconds for minimum outbound absolute-value inter-packet delay variation that will allow the probe operation to pass.
U32 adGenAOSnmICMPTSIpdvAbsRtAvgFail	1.3.6.1.4.1.664.5.53.2.2.7.1.25	Unsigned32	read-write	Specifies the average round-trip absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
U32 adGenAOSnmICMPTSIpdvAbsRtAvgPass	1.3.6.1.4.1.664.5.53.2.2.7.1.28	Unsigned32	read-write	Specifies the threshold in milliseconds for average round-trip absolute-value inter-packet delay variation that will allow the probe operation to pass.
U32 adGenAOSnmICMPTSIpdvAbsRtMaxFail	1.3.6.1.4.1.664.5.53.2.2.7.1.26	Unsigned32	read-write	Specifies the maximum round-trip absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
U32 adGenAOSnmICMPTSIpdvAbsRtMaxPass	1.3.6.1.4.1.664.5.53.2.2.7.1.29	Unsigned32	read-write	Specifies the threshold in milliseconds for maximum round-trip absolute-value inter-packet delay variation that will allow the probe operation to pass.
U32 adGenAOSnmICMPTSIpdvAbsRtMinFail	1.3.6.1.4.1.664.5.53.2.2.7.1.24	Unsigned32	read-write	Specifies the minimum round-trip absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
U32 adGenAOSnmICMPTSIpdvAbsRtMinPass	1.3.6.1.4.1.664.5.53.2.2.7.1.27	Unsigned32	read-write	Specifies the threshold in milliseconds for minimum round-trip absolute-value inter-packet delay variation that will allow the probe operation to pass.
C32 adGenAOSnmICMPTSIpvAbsInMax	1.3.6.1.4.1.664.5.53.2.2.8.1.52	Counter32	read-only	The maximum value in the set of absolute inbound inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvAbsInMin	1.3.6.1.4.1.664.5.53.2.2.8.1.51	Counter32	read-only	The minimum value in the set of absolute inbound inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvAbsInNum	1.3.6.1.4.1.664.5.53.2.2.8.1.55	Counter32	read-only	The number of absolute inbound inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvAbsInSum	1.3.6.1.4.1.664.5.53.2.2.8.1.53	Counter32	read-only	The sum of absolute inbound inter-packet delay variation measurements.
C64 adGenAOSnmICMPTSIpvAbsInSum2	1.3.6.1.4.1.664.5.53.2.2.8.1.54	Counter64	read-only	The sum of the squares of absolute inbound inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvAbsOutMax	1.3.6.1.4.1.664.5.53.2.2.8.1.57	Counter32	read-only	The maximum value in the set of absolute outbound inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvAbsOutMin	1.3.6.1.4.1.664.5.53.2.2.8.1.56	Counter32	read-only	The minimum value in the set of absolute outbound inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvAbsOutNum	1.3.6.1.4.1.664.5.53.2.2.8.1.60	Counter32	read-only	The number of absolute outbound inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvAbsOutSum	1.3.6.1.4.1.664.5.53.2.2.8.1.58	Counter32	read-only	The sum of absolute outbound inter-packet delay variation measurements.
C64 adGenAOSnmICMPTSIpvAbsOutSum2	1.3.6.1.4.1.664.5.53.2.2.8.1.59	Counter64	read-only	The sum of the squares of absolute outbound inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvAbsRtMax	1.3.6.1.4.1.664.5.53.2.2.8.1.62	Counter32	read-only	The maximum value in the set of absolute round-trip inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvAbsRtMin	1.3.6.1.4.1.664.5.53.2.2.8.1.61	Counter32	read-only	The minimum value in the set of absolute round-trip inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvAbsRtNum	1.3.6.1.4.1.664.5.53.2.2.8.1.65	Counter32	read-only	The number of absolute round-trip inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvAbsRtSum	1.3.6.1.4.1.664.5.53.2.2.8.1.63	Counter32	read-only	The sum of absolute round-trip inter-packet delay variation measurements.
C64 adGenAOSnmICMPTSIpvAbsRtSum2	1.3.6.1.4.1.664.5.53.2.2.8.1.64	Counter64	read-only	The sum of the squares of absolute round-trip inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvNegInMax	1.3.6.1.4.1.664.5.53.2.2.8.1.37	Counter32	read-only	The maximum value in the set of negative inbound inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvNegInMin	1.3.6.1.4.1.664.5.53.2.2.8.1.36	Counter32	read-only	The minimum value in the set of negative inbound inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvNegInNum	1.3.6.1.4.1.664.5.53.2.2.8.1.40	Counter32	read-only	The number of negative inbound inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvNegInSum	1.3.6.1.4.1.664.5.53.2.2.8.1.38	Counter32	read-only	The sum of negative inbound inter-packet delay variation measurements.
C64 adGenAOSnmICMPTSIpvNegInSum2	1.3.6.1.4.1.664.5.53.2.2.8.1.39	Counter64	read-only	The sum of the squares of negative inbound inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvNegOutMax	1.3.6.1.4.1.664.5.53.2.2.8.1.42	Counter32	read-only	The maximum value in the set of negative outbound inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvNegOutMin	1.3.6.1.4.1.664.5.53.2.2.8.1.41	Counter32	read-only	The minimum value in the set of negative outbound inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvNegOutNum	1.3.6.1.4.1.664.5.53.2.2.8.1.45	Counter32	read-only	The number of negative outbound inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvNegOutSum	1.3.6.1.4.1.664.5.53.2.2.8.1.43	Counter32	read-only	The sum of negative outbound inter-packet delay variation measurements.
C64 adGenAOSnmICMPTSIpvNegOutSum2	1.3.6.1.4.1.664.5.53.2.2.8.1.44	Counter64	read-only	The sum of the squares of negative outbound inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvNegRtMax	1.3.6.1.4.1.664.5.53.2.2.8.1.47	Counter32	read-only	The maximum value in the set of negative round-trip inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvNegRtMin	1.3.6.1.4.1.664.5.53.2.2.8.1.46	Counter32	read-only	The minimum value in the set of negative round-trip inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvNegRtNum	1.3.6.1.4.1.664.5.53.2.2.8.1.50	Counter32	read-only	The number of negative round-trip inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvNegRtSum	1.3.6.1.4.1.664.5.53.2.2.8.1.48	Counter32	read-only	The sum of negative round-trip inter-packet delay variation measurements.
C64 adGenAOSnmICMPTSIpvNegRtSum2	1.3.6.1.4.1.664.5.53.2.2.8.1.49	Counter64	read-only	The sum of the squares of negative round-trip inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvPosInMax	1.3.6.1.4.1.664.5.53.2.2.8.1.22	Counter32	read-only	The maximum value in the set of positive inbound inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvPosInMin	1.3.6.1.4.1.664.5.53.2.2.8.1.21	Counter32	read-only	The minimum value in the set of positive inbound inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvPosInNum	1.3.6.1.4.1.664.5.53.2.2.8.1.25	Counter32	read-only	The number of positive inbound inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvPosInSum	1.3.6.1.4.1.664.5.53.2.2.8.1.23	Counter32	read-only	The sum of positive inbound inter-packet delay variation measurements.
C64 adGenAOSnmICMPTSIpvPosInSum2	1.3.6.1.4.1.664.5.53.2.2.8.1.24	Counter64	read-only	The sum of the squares of positive inbound inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvPosOutMax	1.3.6.1.4.1.664.5.53.2.2.8.1.27	Counter32	read-only	The maximum value in the set of positive outbound inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvPosOutMin	1.3.6.1.4.1.664.5.53.2.2.8.1.26	Counter32	read-only	The minimum value in the set of positive outbound inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvPosOutNum	1.3.6.1.4.1.664.5.53.2.2.8.1.30	Counter32	read-only	The number of positive outbound inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvPosOutSum	1.3.6.1.4.1.664.5.53.2.2.8.1.28	Counter32	read-only	The sum of positive outbound inter-packet delay variation measurements.
C64 adGenAOSnmICMPTSIpvPosOutSum2	1.3.6.1.4.1.664.5.53.2.2.8.1.29	Counter64	read-only	The sum of the squares of positive outbound inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvPosRtMax	1.3.6.1.4.1.664.5.53.2.2.8.1.32	Counter32	read-only	The maximum value in the set of positive round-trip inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvPosRtMin	1.3.6.1.4.1.664.5.53.2.2.8.1.31	Counter32	read-only	The minimum value in the set of positive round-trip inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvPosRtNum	1.3.6.1.4.1.664.5.53.2.2.8.1.35	Counter32	read-only	The number of positive round-trip inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSIpvPosRtSum	1.3.6.1.4.1.664.5.53.2.2.8.1.33	Counter32	read-only	The sum of positive round-trip inter-packet delay variation measurements.
C64 adGenAOSnmICMPTSIpvPosRtSum2	1.3.6.1.4.1.664.5.53.2.2.8.1.34	Counter64	read-only	The sum of the squares of positive round-trip inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSLossRoundTrip	1.3.6.1.4.1.664.5.53.2.2.8.1.11	Counter32	read-only	The round-trip packet loss.
INT adGenAOSnmICMPTSPaddingFormat	1.3.6.1.4.1.664.5.53.2.2.7.1.6	INTEGER	read-write	Specifies the format of the padding pattern.
INT adGenAOSnmICMPTSPaddingLen	1.3.6.1.4.1.664.5.53.2.2.7.1.5	INTEGER	read-write	Size of ICMP padding length.
OCT adGenAOSnmICMPTSPaddingPattern	1.3.6.1.4.1.664.5.53.2.2.7.1.7	OCTET STRING	read-write	Specifies data pattern to pad the packet. This can be an ascii or hexadecimal pattern and must match the type set in adGenAOSnmICMPTSPktFormat. In addition, adGenAOSnmICMPTSDataPadType must be set to 'custom'.
INT adGenAOSnmICMPTSPktRtLossFail	1.3.6.1.4.1.664.5.53.2.2.7.1.48	INTEGER	read-write	Specifies the round-trip packet-loss threshold in milliseconds that will cause the probe operation to fail.
INT adGenAOSnmICMPTSPktRtLossPass	1.3.6.1.4.1.664.5.53.2.2.7.1.49	INTEGER	read-write	Specifies the round-trip packet-loss threshold in milliseconds that will allow the probe operation to change to the pass state.
INT adGenAOSnmICMPTSPktSendCnt	1.3.6.1.4.1.664.5.53.2.2.7.1.9	INTEGER	read-write	Specifies the number of packets to send and receive for one probe operation. More than one is required for inter-packet delay variation measurements.
C32 adGenAOSnmICMPTSPktSentCount	1.3.6.1.4.1.664.5.53.2.2.8.1.66	Counter32	read-only	The number of packets sent.
INT adGenAOSnmICMPTSResponder	1.3.6.1.4.1.664.5.53.2.2.9	INTEGER	read-write	Specifies ability to enable or disable the ICMP Timstamp responder to respond to ICMP timestamp requests.
adGenAOSnmICMPTSResponderGroup	1.3.6.1.4.1.664.5.53.99.7.1.9			Object designed to assist in changing the state of the ICMP timestamp responder.
C32 adGenAOSnmICMPTSResponderPacketsReceived	1.3.6.1.4.1.664.5.53.2.2.11.1.2	Counter32	read-only	Number of packets received by the responder.
C32 adGenAOSnmICMPTSResponderPacketsSent	1.3.6.1.4.1.664.5.53.2.2.11.1.3	Counter32	read-only	Number of packets sent by the responder.
adGenAOSnmICMPTSResponderStatsEntry	1.3.6.1.4.1.664.5.53.2.2.11.1		not-accessible	The read-only statistics of the network monitor ICMP timestamp responder.
adGenAOSnmICMPTSResponderStatsGroup	1.3.6.1.4.1.664.5.53.99.7.1.11			Objects designed to assist in retrieving the statistics of the ICMP timestamp responder.
U32 adGenAOSnmICMPTSResponderStatsIndex	1.3.6.1.4.1.664.5.53.2.2.11.1.1	Unsigned32	read-only	Uniquely identifies a row in the adGenAOSnmICMPTSResponderStatsTable.
adGenAOSnmICMPTSResponderStatsTable	1.3.6.1.4.1.664.5.53.2.2.11		not-accessible	Operation history for a network monitor ICMP timestamp probe.
INT adGenAOSnmICMPTSSendScheduleType	1.3.6.1.4.1.664.5.53.2.2.7.1.10	INTEGER	read-write	Specifies in milliseconds the time between test packets during a single probe operation.
INT adGenAOSnmICMPTSSendScheduleValue	1.3.6.1.4.1.664.5.53.2.2.7.1.11	INTEGER	read-write	Specifies in milliseconds the time between start of each packet send operation.
I32 adGenAOSnmICMPTSSeqNum	1.3.6.1.4.1.664.5.53.2.2.8.1.1	Integer32	read-only	Along with adGenAOSnmICMPTSHistoryName, uniquely identifies a row in the adGenAOSnmICMPTSHistoryTable. A sequence number of '1' signifies the current history entry.
IP adGenAOSnmICMPTSSrcIP	1.3.6.1.4.1.664.5.53.2.2.7.1.3	IpAddress	read-write	Specifies the source IPv4 address.
STR adGenAOSnmICMPTSStartTime	1.3.6.1.4.1.664.5.53.2.2.8.1.3	DisplayString	read-only	The date and time the probe operation started.
STR adGenAOSnmIEDestHostname	1.3.6.1.4.1.664.5.53.2.2.13.1.2	DisplayString	read-write	Specifies the destination hostname or IP address as a string in dotted decimal format.
INT adGenAOSnmIEPacketLength	1.3.6.1.4.1.664.5.53.2.2.13.1.4	INTEGER	read-write	Length of the ICMP packet.
OCT adGenAOSnmIEPacketPattern	1.3.6.1.4.1.664.5.53.2.2.13.1.5	OCTET STRING	read-write	Specifies the hexadecimal pattern for the ICMP packet.
IP adGenAOSnmIESrcIP	1.3.6.1.4.1.664.5.53.2.2.13.1.3	IpAddress	read-write	Specifies the source IPv4 address.
I32 adGenAOSnmIndex	1.3.6.1.4.1.664.5.53.2.2.2.1.1	Integer32	read-only	Uniquely identifies a row in the adGenAOSnmProbeTable. This is the index chosen by the management station for row creation. If the adGenAOSnmIndex is already in use when attempting to create a new row with a set operation, then an error will be returned.
OCT adGenAOSnmName	1.3.6.1.4.1.664.5.53.2.2.2.1.2	OCTET STRING	read-create	Unique string to identify probe.
adGenAOSnmNotificationGroup	1.3.6.1.4.1.664.5.53.99.7.1.15			Traps which may be used to enhance event driven management of Network Monitoring traps.
INT adGenAOSnmPassTolerance	1.3.6.1.4.1.664.5.53.2.2.3.1.7	INTEGER	read-write	Specifies how many probe operations must fail before the probe state transitions to the fail state.
I32 adGenAOSnmPollPeriod	1.3.6.1.4.1.664.5.53.2.2.3.1.3	Integer32	read-write	Specifies the poll period, in seconds, of the probe.
adGenAOSnmProbeEntry	1.3.6.1.4.1.664.5.53.2.2.2.1		not-accessible	The parameters for a particular network monitor probe.
adGenAOSnmProbeGroup	1.3.6.1.4.1.664.5.53.99.7.1.2			The objects necessary to create the network monitor probe.
adGenAOSnmProbeStatusEntry	1.3.6.1.4.1.664.5.53.2.2.4.1		not-accessible	The parameters used to view the status of a particular network monitor probe.
adGenAOSnmProbeStatusGroup	1.3.6.1.4.1.664.5.53.99.7.1.4			Objects designed to assist in retrieving the statistics of the probes.
adGenAOSnmProbeStatusTable	1.3.6.1.4.1.664.5.53.2.2.4		not-accessible	View the status of a network monitor probe.
adGenAOSnmProbeTable	1.3.6.1.4.1.664.5.53.2.2.2		not-accessible	Create a network monitor probe.
I32 adGenAOSnmProbeTableNextIndex	1.3.6.1.4.1.664.5.53.2.2.1	Integer32	read-only	This object contains an unused value for adGenAOSnmIndex in the adGenAOSnmProbeTable, or a zero to indicate that none exist.
adGenAOSnmProbeTableNextIndexGroup	1.3.6.1.4.1.664.5.53.99.7.1.1			The object necessary to get the next index for creation of the network monitor probe.
adGenAOSnmReadOnlyCompliance	1.3.6.1.4.1.664.5.53.99.7.2.2			The compliance statement for SNMP entities which implement version 2 of the adGenAOSNetMon MIB. When this MIB is implemented without support for read-create (i.e. in read-only mode), then such an implementation can claim read-only compliance. A network monitor probe can then be monitored but cannot be configured with this MIB.
ROW adGenAOSnmRowStatus	1.3.6.1.4.1.664.5.53.2.2.2.1.4	RowStatus	read-create	SNMP Version 2 Row Status Variable. The status of the conceptual row. In order for this object to become active, the following row objects MUST be defined: adGenAOSnmName and adGenAOSnmType. The control row objects adGenAOSnmName and adGenAOSnmType cannot be modified once this conceptual row has been created. The value 'notInService' and 'createAndWait' will not be supported. This object can be set to 'destroy' from any value at any time.
C32 adGenAOSnmStatsToleranceTestSize	1.3.6.1.4.1.664.5.53.2.2.4.1.5	Counter32	read-only	Specifies the test size.
C32 adGenAOSnmStatsToleranceTestValue	1.3.6.1.4.1.664.5.53.2.2.4.1.6	Counter32	read-only	Specifies number of tests that passed or failed. Check 'adGenAOSnmTestStatus' for test state.
OCT adGenAOSnmStatusName	1.3.6.1.4.1.664.5.53.2.2.4.1.1	OCTET STRING	read-only	The name of the corresponding probe entry. The probe identified by a particular value of this index is the same probe as identified by the same value as a adGenAOSnmName object instance.
C32 adGenAOSnmTestsFailed	1.3.6.1.4.1.664.5.53.2.2.4.1.4	Counter32	read-only	Number of test that failed.
C32 adGenAOSnmTestsRunEx	1.3.6.1.4.1.664.5.53.2.2.4.1.3	Counter32	read-only	Number of test run on the probe.
INT adGenAOSnmTestStatus	1.3.6.1.4.1.664.5.53.2.2.4.1.2	INTEGER	read-only	Current test state of the probe.
U32 adGenAOSnmTimeoutPeriod	1.3.6.1.4.1.664.5.53.2.2.3.1.4	Unsigned32	read-write	Time to wait for a response after which a packet is considered lost.
TIK adGenAOSnmTimeSinceLastStatusChange	1.3.6.1.4.1.664.5.53.2.2.4.1.7	TimeTicks	read-only	Time since last status change.
INT adGenAOSnmToleranceMode	1.3.6.1.4.1.664.5.53.2.2.3.1.5	INTEGER	read-write	Specifies the tolerance mode of the probe.
INT adGenAOSnmToleranceTestSize	1.3.6.1.4.1.664.5.53.2.2.3.1.8	INTEGER	read-write	Specifies test size for rate calculations when the tolerance mode is set to 'rate'.
adGenAOSnmTrackEntry	1.3.6.1.4.1.664.5.53.2.2.14.1		not-accessible	Network monitor Track entry.
adGenAOSnmTrackGroup	1.3.6.1.4.1.664.5.53.99.7.1.14			Objects designed to assist in retrieving track information.
I32 adGenAOSnmTrackIndex	1.3.6.1.4.1.664.5.53.2.2.14.1.1	Integer32	read-only	Uniquely identifies a row in the adGenAOSnmTrackTable.
OCT adGenAOSnmTrackName	1.3.6.1.4.1.664.5.53.2.2.14.1.2	OCTET STRING	read-only	The name of the corresponding Track entry.
NTF adGenAOSnmTrackStateChgFail	1.3.6.1.4.1.664.5.53.2.2.0.1			A stateChangeFail trap indicates that the specified track has changed states from Pass to Fail.
NTF adGenAOSnmTrackStateChgPass	1.3.6.1.4.1.664.5.53.2.2.0.2			A stateChangePass trap indicates that the specified track has changed states from Fail to Pass.
adGenAOSnmTrackTable	1.3.6.1.4.1.664.5.53.2.2.14		not-accessible	Network monitor Track.
adGenAOSnmTrackTraps	1.3.6.1.4.1.664.5.53.2.2.0
adGenAOSnmTwampHistoryEntry	1.3.6.1.4.1.664.5.53.2.2.6.1		not-accessible	The read-only history of a particular network monitor TWAMP probe.
adGenAOSnmTwampHistoryGroup	1.3.6.1.4.1.664.5.53.99.7.1.6			Objects designed to assist in retrieving the statistics of the TWAMP probe.
adGenAOSnmTwampHistoryTable	1.3.6.1.4.1.664.5.53.2.2.6		not-accessible	Operation history for a network monitor TWAMP probe.
INT adGenAOSnmTWAMPResponder	1.3.6.1.4.1.664.5.53.2.2.10	INTEGER	read-write	Specifies ability to enable or disable the TWAMP responder to respond to ICMP timestamp requests.
adGenAOSnmTWAMPResponderGroup	1.3.6.1.4.1.664.5.53.99.7.1.10			Object designed to assist in changing the state of the TWAMP responder.
C32 adGenAOSnmTwampResponderPacketsReceived	1.3.6.1.4.1.664.5.53.2.2.12.1.2	Counter32	read-only	Number of packets received by the responder.
C32 adGenAOSnmTwampResponderPacketsSent	1.3.6.1.4.1.664.5.53.2.2.12.1.3	Counter32	read-only	Number of packets sent by the responder.
C32 adGenAOSnmTwampResponderSessionClosed	1.3.6.1.4.1.664.5.53.2.2.12.1.4	Counter32	read-only	Number of responder sessions closed.
C32 adGenAOSnmTwampResponderSessionOpened	1.3.6.1.4.1.664.5.53.2.2.12.1.5	Counter32	read-only	Number of responder sessions opened.
C32 adGenAOSnmTwampResponderSessionRejected	1.3.6.1.4.1.664.5.53.2.2.12.1.6	Counter32	read-only	Number of responder sessions closed.
adGenAOSnmTwampResponderStatsEntry	1.3.6.1.4.1.664.5.53.2.2.12.1		not-accessible	The read-only statistics of the network monitor TWAMP responder.
adGenAOSnmTwampResponderStatsGroup	1.3.6.1.4.1.664.5.53.99.7.1.12			Objects designed to assist in retrieving the statistics of the TWAMP responder.
U32 adGenAOSnmTwampResponderStatsIndex	1.3.6.1.4.1.664.5.53.2.2.12.1.1	Unsigned32	read-only	Uniquely identifies a row in the adGenAOSnmTwampResponderStatsTable.
adGenAOSnmTwampResponderStatsTable	1.3.6.1.4.1.664.5.53.2.2.12		not-accessible	Operation history for a network monitor TWAMP probe.
INT adGenAOSnmTwDataPadType	1.3.6.1.4.1.664.5.53.2.2.5.1.10	INTEGER	read-write	Specifies how the TWAMP padding payload is filled.
I32 adGenAOSnmTwDelayInAvgFail	1.3.6.1.4.1.664.5.53.2.2.5.1.33	Integer32	read-write	Specifies the average inbound delay threshold in milliseconds that will cause the probe operation to fail.
I32 adGenAOSnmTwDelayInAvgPass	1.3.6.1.4.1.664.5.53.2.2.5.1.36	Integer32	read-write	Specifies the threshold in milliseconds for average inbound delay that will allow the probe operation to pass.
I32 adGenAOSnmTwDelayInMax	1.3.6.1.4.1.664.5.53.2.2.6.1.10	Integer32	read-only	The inbound maximum delay in milliseconds.
I32 adGenAOSnmTwDelayInMaxFail	1.3.6.1.4.1.664.5.53.2.2.5.1.34	Integer32	read-write	Specifies the maximum inbound delay threshold in milliseconds that will cause the probe operation to fail.
I32 adGenAOSnmTwDelayInMaxPass	1.3.6.1.4.1.664.5.53.2.2.5.1.37	Integer32	read-write	Specifies the threshold in milliseconds for maximum inbound delay that will allow the probe operation to pass.
I32 adGenAOSnmTwDelayInMin	1.3.6.1.4.1.664.5.53.2.2.6.1.9	Integer32	read-only	The inbound minimum delay in milliseconds.
I32 adGenAOSnmTwDelayInMinFail	1.3.6.1.4.1.664.5.53.2.2.5.1.32	Integer32	read-write	Specifies the minimum inbound delay threshold in milliseconds that will cause the probe operation to fail.
I32 adGenAOSnmTwDelayInMinPass	1.3.6.1.4.1.664.5.53.2.2.5.1.35	Integer32	read-write	Specifies the threshold in milliseconds for minimum inbound delay that will allow the probe operation to pass.
C32 adGenAOSnmTwDelayInNum	1.3.6.1.4.1.664.5.53.2.2.6.1.21	Counter32	read-only	The number of individual inbound delay samples.
I32 adGenAOSnmTwDelayInSum	1.3.6.1.4.1.664.5.53.2.2.6.1.19	Integer32	read-only	The sum of inbound delay in milliseconds.
C64 adGenAOSnmTwDelayInSum2	1.3.6.1.4.1.664.5.53.2.2.6.1.20	Counter64	read-only	The sum of the squares of inbound delay in milliseconds.
I32 adGenAOSnmTwDelayOutAvgFail	1.3.6.1.4.1.664.5.53.2.2.5.1.39	Integer32	read-write	Specifies the average outbound delay threshold in milliseconds that will cause the probe operation to fail.
I32 adGenAOSnmTwDelayOutAvgPass	1.3.6.1.4.1.664.5.53.2.2.5.1.42	Integer32	read-write	Specifies the threshold in milliseconds for average outbound delay that will allow the probe operation to pass.
I32 adGenAOSnmTwDelayOutMax	1.3.6.1.4.1.664.5.53.2.2.6.1.12	Integer32	read-only	The outbound maximum delay in milliseconds.
I32 adGenAOSnmTwDelayOutMaxFail	1.3.6.1.4.1.664.5.53.2.2.5.1.40	Integer32	read-write	Specifies the maximum outbound delay threshold in milliseconds that will cause the probe operation to fail.
I32 adGenAOSnmTwDelayOutMaxPass	1.3.6.1.4.1.664.5.53.2.2.5.1.43	Integer32	read-write	Specifies the threshold in milliseconds for maximum outbound delay that will allow the probe operation to pass.
I32 adGenAOSnmTwDelayOutMin	1.3.6.1.4.1.664.5.53.2.2.6.1.11	Integer32	read-only	The outbound minimum delay in milliseconds.
I32 adGenAOSnmTwDelayOutMinFail	1.3.6.1.4.1.664.5.53.2.2.5.1.38	Integer32	read-write	Specifies the minimum outbound delay threshold in milliseconds that will cause the probe operation to fail.
I32 adGenAOSnmTwDelayOutMinPass	1.3.6.1.4.1.664.5.53.2.2.5.1.41	Integer32	read-write	Specifies the threshold in milliseconds for minimum outbound delay that will allow the probe operation to pass.
C32 adGenAOSnmTwDelayOutNum	1.3.6.1.4.1.664.5.53.2.2.6.1.18	Counter32	read-only	The number of individual outbound delay samples.
I32 adGenAOSnmTwDelayOutSum	1.3.6.1.4.1.664.5.53.2.2.6.1.16	Integer32	read-only	The sum of outbound delay in milliseconds.
C64 adGenAOSnmTwDelayOutSum2	1.3.6.1.4.1.664.5.53.2.2.6.1.17	Counter64	read-only	The sum of the squares of outbound delay in milliseconds.
I32 adGenAOSnmTwDelayRtAvgFail	1.3.6.1.4.1.664.5.53.2.2.5.1.45	Integer32	read-write	Specifies the average round-trip delay threshold in milliseconds that will cause the probe operation to fail.
I32 adGenAOSnmTwDelayRtAvgPass	1.3.6.1.4.1.664.5.53.2.2.5.1.48	Integer32	read-write	Specifies the threshold in milliseconds for average round-trip delay that will allow the probe operation to pass.
I32 adGenAOSnmTwDelayRtMax	1.3.6.1.4.1.664.5.53.2.2.6.1.14	Integer32	read-only	The round-trip maximum delay in milliseconds.
I32 adGenAOSnmTwDelayRtMaxFail	1.3.6.1.4.1.664.5.53.2.2.5.1.46	Integer32	read-write	Specifies the maximum round-trip delay threshold in milliseconds that will cause the probe operation to fail.
I32 adGenAOSnmTwDelayRtMaxPass	1.3.6.1.4.1.664.5.53.2.2.5.1.49	Integer32	read-write	Specifies the threshold in milliseconds for maximum round-trip delay that will allow the probe operation to pass.
I32 adGenAOSnmTwDelayRtMin	1.3.6.1.4.1.664.5.53.2.2.6.1.13	Integer32	read-only	The round-trip minimum delay in milliseconds.
I32 adGenAOSnmTwDelayRtMinFail	1.3.6.1.4.1.664.5.53.2.2.5.1.44	Integer32	read-write	Specifies the minimum round-trip delay threshold in milliseconds that will cause the probe operation to fail.
I32 adGenAOSnmTwDelayRtMinPass	1.3.6.1.4.1.664.5.53.2.2.5.1.47	Integer32	read-write	Specifies the threshold in milliseconds for minimum round-trip delay that will allow the probe operation to pass.
C32 adGenAOSnmTwDelayRtNum	1.3.6.1.4.1.664.5.53.2.2.6.1.24	Counter32	read-only	The number of individual round-trip delay samples.
I32 adGenAOSnmTwDelayRtSum	1.3.6.1.4.1.664.5.53.2.2.6.1.22	Integer32	read-only	The sum of round-trip delay in milliseconds.
C64 adGenAOSnmTwDelayRtSum2	1.3.6.1.4.1.664.5.53.2.2.6.1.23	Counter64	read-only	The sum of the squares of round-trip delay in milliseconds.
STR adGenAOSnmTwDestHostname	1.3.6.1.4.1.664.5.53.2.2.5.1.2	DisplayString	read-write	Specifies the destination hostname or IP address as a string in dotted decimal format.
INT adGenAOSnmTwDestPort	1.3.6.1.4.1.664.5.53.2.2.5.1.3	INTEGER	read-write	Specifies the destination port. If zero then the actual destination port will be dynamically negotiated with the responder.
INT adGenAOSnmTwDscp	1.3.6.1.4.1.664.5.53.2.2.5.1.6	INTEGER	read-write	Specifies the DiffServ Code Point value that will be used on packets sent and will be negotiated with the responder.
STR adGenAOSnmTwEndTime	1.3.6.1.4.1.664.5.53.2.2.6.1.4	DisplayString	read-only	Date and time the probe operation ended.
INT adGenAOSnmTwHistoryDepth	1.3.6.1.4.1.664.5.53.2.2.5.1.52	INTEGER	read-write	Specifies the number of probe operation statistic results to keep.
OCT adGenAOSnmTwHistoryName	1.3.6.1.4.1.664.5.53.2.2.6.1.2	OCTET STRING	read-only	The name of the corresponding TWAMP probe entry. The probe identified by a particular value of this object is the same probe as identified by the same value as a adGenAOSnmName object instance.
U32 adGenAOSnmTwIpdvAbsInAvgFail	1.3.6.1.4.1.664.5.53.2.2.5.1.15	Unsigned32	read-write	Specifies the average inbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
U32 adGenAOSnmTwIpdvAbsInAvgPass	1.3.6.1.4.1.664.5.53.2.2.5.1.18	Unsigned32	read-write	Specifies the threshold in milliseconds for average inbound absolute-value inter-packet delay variation that will allow the probe operation to pass.
U32 adGenAOSnmTwIpdvAbsInMaxFail	1.3.6.1.4.1.664.5.53.2.2.5.1.16	Unsigned32	read-write	Specifies the maximum inbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
U32 adGenAOSnmTwIpdvAbsInMaxPass	1.3.6.1.4.1.664.5.53.2.2.5.1.19	Unsigned32	read-write	Specifies the threshold in milliseconds for maximum inbound absolute-value inter-packet delay variation that will allow the probe operation to pass.
U32 adGenAOSnmTwIpdvAbsInMinFail	1.3.6.1.4.1.664.5.53.2.2.5.1.14	Unsigned32	read-write	Specifies the minimum inbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
U32 adGenAOSnmTwIpdvAbsInMinPass	1.3.6.1.4.1.664.5.53.2.2.5.1.17	Unsigned32	read-write	Specifies the threshold in milliseconds for minimum inbound absolute-value inter-packet delay variation that will allow the probe operation to pass.
U32 adGenAOSnmTwIpdvAbsOutAvgFail	1.3.6.1.4.1.664.5.53.2.2.5.1.21	Unsigned32	read-write	Specifies the average outbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
U32 adGenAOSnmTwIpdvAbsOutAvgPass	1.3.6.1.4.1.664.5.53.2.2.5.1.24	Unsigned32	read-write	Specifies the threshold in milliseconds for average outbound absolute-value inter-packet delay variation that will allow the probe operation to pass.
U32 adGenAOSnmTwIpdvAbsOutMaxFail	1.3.6.1.4.1.664.5.53.2.2.5.1.22	Unsigned32	read-write	Specifies the maximum outbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
U32 adGenAOSnmTwIpdvAbsOutMaxPass	1.3.6.1.4.1.664.5.53.2.2.5.1.25	Unsigned32	read-write	Specifies the threshold in milliseconds for maximum outbound absolute-value inter-packet delay variation that will allow the probe operation to pass.
U32 adGenAOSnmTwIpdvAbsOutMinFail	1.3.6.1.4.1.664.5.53.2.2.5.1.20	Unsigned32	read-write	Specifies the minimum outbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
U32 adGenAOSnmTwIpdvAbsOutMinPass	1.3.6.1.4.1.664.5.53.2.2.5.1.23	Unsigned32	read-write	Specifies the threshold in milliseconds for minimum outbound absolute-value inter-packet delay variation that will allow the probe operation to pass.
U32 adGenAOSnmTwIpdvAbsRtAvgFail	1.3.6.1.4.1.664.5.53.2.2.5.1.27	Unsigned32	read-write	Specifies the average round-trip absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
U32 adGenAOSnmTwIpdvAbsRtAvgPass	1.3.6.1.4.1.664.5.53.2.2.5.1.30	Unsigned32	read-write	Specifies the threshold in milliseconds for average round-trip absolute-value inter-packet delay variation that will allow the probe operation to pass.
U32 adGenAOSnmTwIpdvAbsRtMaxFail	1.3.6.1.4.1.664.5.53.2.2.5.1.28	Unsigned32	read-write	Specifies the maximum round-trip absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
U32 adGenAOSnmTwIpdvAbsRtMaxPass	1.3.6.1.4.1.664.5.53.2.2.5.1.31	Unsigned32	read-write	Specifies the threshold in milliseconds for maximum round-trip absolute-value inter-packet delay variation that will allow the probe operation to pass.
U32 adGenAOSnmTwIpdvAbsRtMinFail	1.3.6.1.4.1.664.5.53.2.2.5.1.26	Unsigned32	read-write	Specifies the minimum round-trip absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
U32 adGenAOSnmTwIpdvAbsRtMinPass	1.3.6.1.4.1.664.5.53.2.2.5.1.29	Unsigned32	read-write	Specifies the threshold in milliseconds for minimum round-trip absolute-value inter-packet delay variation that will allow the probe operation to pass.
C32 adGenAOSnmTwIpvAbsInMax	1.3.6.1.4.1.664.5.53.2.2.6.1.56	Counter32	read-only	The maximum value in the set of absolute inbound inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvAbsInMin	1.3.6.1.4.1.664.5.53.2.2.6.1.55	Counter32	read-only	The minimum value in the set of absolute inbound inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvAbsInNum	1.3.6.1.4.1.664.5.53.2.2.6.1.59	Counter32	read-only	The number of absolute inbound inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvAbsInSum	1.3.6.1.4.1.664.5.53.2.2.6.1.57	Counter32	read-only	The sum of absolute inbound inter-packet delay variation measurements.
C64 adGenAOSnmTwIpvAbsInSum2	1.3.6.1.4.1.664.5.53.2.2.6.1.58	Counter64	read-only	The sum of the squares of absolute inbound inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvAbsOutMax	1.3.6.1.4.1.664.5.53.2.2.6.1.61	Counter32	read-only	The maximum value in the set of absolute outbound inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvAbsOutMin	1.3.6.1.4.1.664.5.53.2.2.6.1.60	Counter32	read-only	The minimum value in the set of absolute outbound inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvAbsOutNum	1.3.6.1.4.1.664.5.53.2.2.6.1.64	Counter32	read-only	The number of absolute outbound inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvAbsOutSum	1.3.6.1.4.1.664.5.53.2.2.6.1.62	Counter32	read-only	The sum of absolute outbound inter-packet delay variation measurements.
C64 adGenAOSnmTwIpvAbsOutSum2	1.3.6.1.4.1.664.5.53.2.2.6.1.63	Counter64	read-only	The sum of the squares of absolute outbound inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvAbsRtMax	1.3.6.1.4.1.664.5.53.2.2.6.1.66	Counter32	read-only	The maximum value in the set of absolute round-trip inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvAbsRtMin	1.3.6.1.4.1.664.5.53.2.2.6.1.65	Counter32	read-only	The minimum value in the set of absolute round-trip inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvAbsRtNum	1.3.6.1.4.1.664.5.53.2.2.6.1.69	Counter32	read-only	The number of absolute round-trip inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvAbsRtSum	1.3.6.1.4.1.664.5.53.2.2.6.1.67	Counter32	read-only	The sum of absolute round-trip inter-packet delay variation measurements.
C64 adGenAOSnmTwIpvAbsRtSum2	1.3.6.1.4.1.664.5.53.2.2.6.1.68	Counter64	read-only	The sum of the squares of absolute round-trip inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvNegInMax	1.3.6.1.4.1.664.5.53.2.2.6.1.41	Counter32	read-only	The maximum value in the set of negative inbound inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvNegInMin	1.3.6.1.4.1.664.5.53.2.2.6.1.40	Counter32	read-only	The minimum value in the set of negative inbound inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvNegInNum	1.3.6.1.4.1.664.5.53.2.2.6.1.44	Counter32	read-only	The number of negative inbound inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvNegInSum	1.3.6.1.4.1.664.5.53.2.2.6.1.42	Counter32	read-only	The sum of negative inbound inter-packet delay variation measurements.
C64 adGenAOSnmTwIpvNegInSum2	1.3.6.1.4.1.664.5.53.2.2.6.1.43	Counter64	read-only	The sum of the squares of negative inbound inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvNegOutMax	1.3.6.1.4.1.664.5.53.2.2.6.1.46	Counter32	read-only	The maximum value in the set of negative outbound inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvNegOutMin	1.3.6.1.4.1.664.5.53.2.2.6.1.45	Counter32	read-only	The minimum value in the set of negative outbound inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvNegOutNum	1.3.6.1.4.1.664.5.53.2.2.6.1.49	Counter32	read-only	The number of negative outbound inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvNegOutSum	1.3.6.1.4.1.664.5.53.2.2.6.1.47	Counter32	read-only	The sum of negative outbound inter-packet delay variation measurements.
C64 adGenAOSnmTwIpvNegOutSum2	1.3.6.1.4.1.664.5.53.2.2.6.1.48	Counter64	read-only	The sum of the squares of negative outbound inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvNegRtMax	1.3.6.1.4.1.664.5.53.2.2.6.1.51	Counter32	read-only	The maximum value in the set of negative round-trip inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvNegRtMin	1.3.6.1.4.1.664.5.53.2.2.6.1.50	Counter32	read-only	The minimum value in the set of negative round-trip inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvNegRtNum	1.3.6.1.4.1.664.5.53.2.2.6.1.54	Counter32	read-only	The number of negative round-trip inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvNegRtSum	1.3.6.1.4.1.664.5.53.2.2.6.1.52	Counter32	read-only	The sum of negative round-trip inter-packet delay variation measurements.
C64 adGenAOSnmTwIpvNegRtSum2	1.3.6.1.4.1.664.5.53.2.2.6.1.53	Counter64	read-only	The sum of the squares of negative round-trip inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvPosInMax	1.3.6.1.4.1.664.5.53.2.2.6.1.26	Counter32	read-only	The maximum value in the set of positive inbound inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvPosInMin	1.3.6.1.4.1.664.5.53.2.2.6.1.25	Counter32	read-only	The minimum value in the set of positive inbound inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvPosInNum	1.3.6.1.4.1.664.5.53.2.2.6.1.29	Counter32	read-only	The number of positive inbound inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvPosInSum	1.3.6.1.4.1.664.5.53.2.2.6.1.27	Counter32	read-only	The sum of positive inbound inter-packet delay variation measurements.
C64 adGenAOSnmTwIpvPosInSum2	1.3.6.1.4.1.664.5.53.2.2.6.1.28	Counter64	read-only	The sum of the squares of positive inbound inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvPosOutMax	1.3.6.1.4.1.664.5.53.2.2.6.1.31	Counter32	read-only	The maximum value in the set of positive outbound inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvPosOutMin	1.3.6.1.4.1.664.5.53.2.2.6.1.30	Counter32	read-only	The minimum value in the set of positive outbound inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvPosOutNum	1.3.6.1.4.1.664.5.53.2.2.6.1.34	Counter32	read-only	The number of positive outbound inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvPosOutSum	1.3.6.1.4.1.664.5.53.2.2.6.1.32	Counter32	read-only	The sum of positive outbound inter-packet delay variation measurements.
C64 adGenAOSnmTwIpvPosOutSum2	1.3.6.1.4.1.664.5.53.2.2.6.1.33	Counter64	read-only	The sum of the squares of positive outbound inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvPosRtMax	1.3.6.1.4.1.664.5.53.2.2.6.1.36	Counter32	read-only	The maximum value in the set of positive round-trip inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvPosRtMin	1.3.6.1.4.1.664.5.53.2.2.6.1.35	Counter32	read-only	The minimum value in the set of positive round-trip inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvPosRtNum	1.3.6.1.4.1.664.5.53.2.2.6.1.39	Counter32	read-only	The number of positive round-trip inter-packet delay variation measurements.
C32 adGenAOSnmTwIpvPosRtSum	1.3.6.1.4.1.664.5.53.2.2.6.1.37	Counter32	read-only	The sum of positive round-trip inter-packet delay variation measurements.
C64 adGenAOSnmTwIpvPosRtSum2	1.3.6.1.4.1.664.5.53.2.2.6.1.38	Counter64	read-only	The sum of the squares of of positive round-trip inter-packet delay variation measurements.
C64 adGenAOSnmTwLocalClkErr	1.3.6.1.4.1.664.5.53.2.2.6.1.6	Counter64	read-only	Local clock error estimate in nanoseconds.
T/F adGenAOSnmTwLocalSyncState	1.3.6.1.4.1.664.5.53.2.2.6.1.5	TruthValue	read-only	If return value is true, local clock is in sync.
C32 adGenAOSnmTwLossRoundTrip	1.3.6.1.4.1.664.5.53.2.2.6.1.15	Counter32	read-only	The round-trip packet loss.
INT adGenAOSnmTwPaddingFormat	1.3.6.1.4.1.664.5.53.2.2.5.1.8	INTEGER	read-write	Specifies the format of the padding pattern.
INT adGenAOSnmTwPaddingLen	1.3.6.1.4.1.664.5.53.2.2.5.1.7	INTEGER	read-write	Size of TWAMP padding length.
OCT adGenAOSnmTwPaddingPattern	1.3.6.1.4.1.664.5.53.2.2.5.1.9	OCTET STRING	read-write	Specifies data pattern to pad the packet. This can be an ascii or hexadecimal pattern and must match the type set in adGenAOSnmTwPktFormat. In addition, adGenAOSnmTwDataPadType must be set to 'custom'.
INT adGenAOSnmTwPktRtLossFail	1.3.6.1.4.1.664.5.53.2.2.5.1.50	INTEGER	read-write	Specifies the round-trip packet-loss threshold in milliseconds that will cause the probe operation to fail.
INT adGenAOSnmTwPktRtLossPass	1.3.6.1.4.1.664.5.53.2.2.5.1.51	INTEGER	read-write	Specifies the round-trip packet-loss threshold in milliseconds that will allow the probe operation to change to the pass state.
INT adGenAOSnmTwPktSendCnt	1.3.6.1.4.1.664.5.53.2.2.5.1.11	INTEGER	read-write	Specifies the number of packets to send and receive for one probe operation. More than one is required for inter-packet delay variation measurements.
C32 adGenAOSnmTwPktSentCount	1.3.6.1.4.1.664.5.53.2.2.6.1.70	Counter32	read-only	The number of packets sent.
C64 adGenAOSnmTwRemoteClkErr	1.3.6.1.4.1.664.5.53.2.2.6.1.8	Counter64	read-only	Remote clock error estimate in nanoseconds.
T/F adGenAOSnmTwRemoteSyncState	1.3.6.1.4.1.664.5.53.2.2.6.1.7	TruthValue	read-only	If return value is true, remote clock is in sync.
INT adGenAOSnmTwSendScheduleType	1.3.6.1.4.1.664.5.53.2.2.5.1.12	INTEGER	read-write	Specifies in milliseconds the time between test packets during a single probe operation.
INT adGenAOSnmTwSendScheduleValue	1.3.6.1.4.1.664.5.53.2.2.5.1.13	INTEGER	read-write	Specifies in milliseconds the time between start of each packet send operation.
I32 adGenAOSnmTwSeqNum	1.3.6.1.4.1.664.5.53.2.2.6.1.1	Integer32	read-only	Along with adGenAOSnmTwHistoryName, uniquely identifies a row in the adGenAOSTwampHistoryTable. A sequence number of '1' signifies the current history entry.
IP adGenAOSnmTwSrcIP	1.3.6.1.4.1.664.5.53.2.2.5.1.4	IpAddress	read-write	Specifies the source IPv4 address.
INT adGenAOSnmTwSrcPort	1.3.6.1.4.1.664.5.53.2.2.5.1.5	INTEGER	read-write	Specifies the source port. If zero then the actual source port will be dynamically assigned ever probe operation.
STR adGenAOSnmTwStartTime	1.3.6.1.4.1.664.5.53.2.2.6.1.3	DisplayString	read-only	Date and time the probe operation started.
INT adGenAOSnmType	1.3.6.1.4.1.664.5.53.2.2.2.1.3	INTEGER	read-create	Specifies the type of probe.

RFC description

Network monitoring for ADTRAN routers including ICMP, TWAMP, and service tracking.

Start monitoring ADTRAN NetVanta/SDG-series AOS devices with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ADTRAN-AOS-NETWORKMONITOR