All MIBs › AC-LAG-MIB › acDot3adAggPortActorAdminState
acDot3adAggPortActorAdminState
Module: AC-LAG-MIB
OID (symbolic): AC-LAG-MIB::acDot3adAggPortActorAdminState
OID (numeric): 1.3.6.1.4.1.2785.2.3.8.1.2.1.1.22
Node type: OBJECT-TYPE
Type: LacpState
Access: read-write
Description: A string of 8 bits, corresponding to the administrative values of Actor_State (43.4.2) as transmitted by the Actor in LACPDUs. The first bit corresponds to bit 0 of Actor_State (LACP_Activity), the second bit corresponds to bit 1 (LACP_Timeout), the third bit corresponds to bit 2 (Aggregation), the fourth bit corresponds to bit 3 (Synchronization), the fifth bit corresponds to bit 4 (Collecting), the sixth bit corresponds to bit 5 (Distributing), the seventh bit corresponds to bit 6 (Defaulted), and the eighth bit corresponds to bit 7 (Expired). These values allow administrative control over the values of LACP_Activity, LACP_Timeout and Aggregation. This attribute value is read-write.
What is acDot3adAggPortActorAdminState?
This OID holds an 8-bit flag controlling the administrative state of an aggregation port's LACP protocol settings, determining activity mode, timeout behavior, and synchronization requirements. A network engineer uses this to manually configure link aggregation parameters like whether the port should be active or passive in LACP negotiation. Example: setting bit 0 to 1 enables LACP activity, meaning the port actively sends LACP frames rather than waiting passively.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2785.2.3.8.1.2.1.1.22 snmpwalk -v2c -c public <target> AC-LAG-MIB::acDot3adAggPortActorAdminState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2785.2.3.8.1.2.1.1.22.1 snmpget -v2c -c public <target> AC-LAG-MIB::acDot3adAggPortActorAdminState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2785.2.3.8.1.2.1.1.22.1 s <value>
Start monitoring Appian Communications access platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AC-LAG-MIB::acDot3adAggPortActorAdminState OID value, configure state conditions and alerts, and monitor any Appian Communications access platforms from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2785 | appian | APPIAN-SMI-MIB |
| 1.3.6.1.4.1.2785.2 | acOsap | APPIAN-SMI-MIB |
| 1.3.6.1.4.1.2785.2.3 | acPport | APPIAN-SMI-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2785.2.3.8 | acLagMIB | AC-LAG-MIB |
| 1.3.6.1.4.1.2785.2.3.8.1 | lagMIBObjects | AC-LAG-MIB |
| 1.3.6.1.4.1.2785.2.3.8.1.2 | acDot3adAggPort | AC-LAG-MIB |
| 1.3.6.1.4.1.2785.2.3.8.1.2.1 | acDot3adAggPortTable | AC-LAG-MIB |
| 1.3.6.1.4.1.2785.2.3.8.1.2.1.1 | acDot3adAggPortEntry | AC-LAG-MIB |
| 1.3.6.1.4.1.2785.2.3.8.1.2.1.1.22 | acDot3adAggPortActorAdminState | AC-LAG-MIB |