DESCH-PSC3-BASE-MIB

All MIBs › DESCH-PSC3-BASE-MIB

Organization: Delta Energy Systems (Switzerland) AG

Last Updated: 2009--0-9-

Category: Device Management

Description: Manages base configuration and status for DESCH PSC3 network equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DESCH-PSC3-BASE-MIB?

DESCH-PSC3-BASE-MIB is a Delta Energy Systems (Switzerland) AG proprietary MIB (built on DESCH-GLOBAL-REG) for managing a PSC 3 DC power system. Its objects cover site/system name, system date/time, software version, urgent/non-urgent alarm counts and identifiers/names/values, a mains-failure alarm, system voltage, load/battery current, battery temperature, charge state, current limit, rectifier current, system power, and rectifier count (total, failed, okay). As a status/performance MIB it lets an administrator watch DC power-system voltage/current and rectifier health, and get alerted on urgent alarms, on a Delta DC power system. It is deployed on Delta Energy Systems (Switzerland) AG DC power systems (PSC 3). Engineers can download the DESCH-PSC3-BASE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DESCH-PSC3-BASE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Delta Energy Systems (Switzerland) AG DC power systems (PSC 3)

Monitoring Examples

An administrator checks dcNumberRectifiersFailure and dcMainsFailureAlarm to catch a failing rectifier or mains-power loss on a Delta PSC 3 DC power system.

What Can Be Monitored

DC power-system voltage/current, rectifier health, and alarms

Imported Objects

From DESCH-GLOBAL-REG

deschModules	OBJECT-IDENTITY
deschPsc3	OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString

How to Use in IPNetwork Monitor

Example using dcNumberUrgentAlarms OID:

Select a Delta Energy Systems (Switzerland) AG DC power system (PSC 3) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type dcNumberUrgentAlarms into the Find box to locate it in the OID tree, then select it and click OK. It reports the number of currently active urgent alarm sources. A zero value indicates that urgent alarm is not active. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Gauge32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
dcAlarmEntry	1.3.6.1.4.1.20246.2.3.1.1.1.2.2.2.1		not-accessible	A particular active alarm source entry.
INT dcAlarmEventCategory	1.3.6.1.4.1.20246.2.3.1.1.1.2.2.2.1.2	INTEGER	read-only	Specifies the type of alarm source.
G32 dcAlarmEventIdentifier	1.3.6.1.4.1.20246.2.3.1.1.1.2.2.2.1.4	Gauge32	read-only	Unique alarm event identifier.
STR dcAlarmEventName	1.3.6.1.4.1.20246.2.3.1.1.1.2.2.2.1.3	DisplayString	read-only	Name of a particular alarm source entry.
INT dcAlarmEventValue	1.3.6.1.4.1.20246.2.3.1.1.1.2.2.2.1.5	INTEGER	read-only	Event status that corresponds to alarm event identifier.
I32 dcAlarmIndex	1.3.6.1.4.1.20246.2.3.1.1.1.2.2.2.1.1	Integer32	not-accessible	Table index.
dcAlarmTable	1.3.6.1.4.1.20246.2.3.1.1.1.2.2.2		not-accessible	Table that shows all currently active alarm sources causing urgent or non-urgent alarm(s).
dcBattery	1.3.6.1.4.1.20246.2.3.1.1.1.2.5
I32 dcBatteryCurrent	1.3.6.1.4.1.20246.2.3.1.1.1.2.3.3	Integer32	read-only	The measured battery current. The max. value 2147483647 is used to indicate an invalid value.
dcBatteryParameter	1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3
I32 dcBatteryTemperature	1.3.6.1.4.1.20246.2.3.1.1.1.2.3.4	Integer32	read-only	The measured battery temperature. The max. value 2147483647 is used to indicate an invalid value.
dcBatteryTest	1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2
INT dcBatteryTestControl	1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.3	INTEGER	read-write	Start/stop of battery test. This special charge mode is used to check the capacity of a battery. Please not that a battery test can be started even if the battery is not fully charged. In this case the test result is ambiguous and the set failure event will become active.
INT dcBatteryTestFailureEvent	1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.5	INTEGER	read-write	Reset battery test failure event.
dcBatteryTestParameter	1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1
dcBatteryTestResult	1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.2
INT dcBatteryTestStatus	1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.4	INTEGER	read-only	Current status of battery test.
dcBoostCharge	1.3.6.1.4.1.20246.2.3.1.1.1.2.5.5
INT dcBoostChargeControl	1.3.6.1.4.1.20246.2.3.1.1.1.2.5.5.1	INTEGER	read-write	Start/stop of boost charge which is a special charge mode that applies a higher voltage to the batteries than the float charge. This mode is started after a discharge phase to recharge the batteries faster.
INT dcBoostChargeStatus	1.3.6.1.4.1.20246.2.3.1.1.1.2.5.5.2	INTEGER	read-only	Current status of boost charge.
INT dcChargeState	1.3.6.1.4.1.20246.2.3.1.1.1.2.3.5	INTEGER	read-only	Battery charge state.
dcControlEventEntry	1.3.6.1.4.1.20246.2.3.1.1.1.2.6.1.1		not-accessible	A particular generic output entry.
G32 dcControlEventIdentifier	1.3.6.1.4.1.20246.2.3.1.1.1.2.6.1.1.3	Gauge32	read-only	Unique numeric identifier of the assigned control event. Zero if not configured.
I32 dcControlEventIndex	1.3.6.1.4.1.20246.2.3.1.1.1.2.6.1.1.1	Integer32	not-accessible	Table index.
STR dcControlEventName	1.3.6.1.4.1.20246.2.3.1.1.1.2.6.1.1.2	DisplayString	read-only	Plain text name of the assigned control event. Empty if not configure.
dcControlEventTable	1.3.6.1.4.1.20246.2.3.1.1.1.2.6.1		not-accessible	Table that shows ten output event assignments that can be configured via WEB interface.
INT dcControlEventValue	1.3.6.1.4.1.20246.2.3.1.1.1.2.6.1.1.4	INTEGER	read-write	Current value of the assigned control event. Value is false if not configured.
INT dcCurrentLimit	1.3.6.1.4.1.20246.2.3.1.1.1.2.3.6	INTEGER	read-only	Battery current limit.
I32 dcDischargeCurrent	1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.4	Integer32	read-only	Battery discharge current. The maximum value 2147483647 is used to indicate an invalid value.
G32 dcDuration	1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.2	Gauge32	read-only	Battery test duration. Zero indicates that this value is not set.
dcEqualize	1.3.6.1.4.1.20246.2.3.1.1.1.2.5.4
INT dcEqualizeControl	1.3.6.1.4.1.20246.2.3.1.1.1.2.5.4.1	INTEGER	read-write	Start/stop of battery equalize which is a special charge mode that applies a higher voltage to the batteries than the float charge. This ensures that the cells are all equally charged.
INT dcEqualizeStatus	1.3.6.1.4.1.20246.2.3.1.1.1.2.5.4.2	INTEGER	read-only	Current status of battery equalize.
dcEventHistoryEntry	1.3.6.1.4.1.20246.2.3.1.1.1.2.2.1.1		not-accessible	A particular Event History entry.
I32 dcEventHistoryIndex	1.3.6.1.4.1.20246.2.3.1.1.1.2.2.1.1.1	Integer32	not-accessible	Table index.
STR dcEventHistoryMessage	1.3.6.1.4.1.20246.2.3.1.1.1.2.2.1.1.3	DisplayString	read-only	Event message of a particular entry.
dcEventHistoryTable	1.3.6.1.4.1.20246.2.3.1.1.1.2.2.1		not-accessible	Controller's event history table that shows the content of the default log file.
STR dcEventHistoryTimestamp	1.3.6.1.4.1.20246.2.3.1.1.1.2.2.1.1.2	DisplayString	read-only	ISO8601 timestamp representation of a particular entry in the form YYYY-MM-DDThh:mm:ss.
INT dcFileProcessingStatus	1.3.6.1.4.1.20246.2.3.1.1.1.2.7.2	INTEGER	read-only	File processing status for software and setup up/downloads.
dcFloatCharge	1.3.6.1.4.1.20246.2.3.1.1.1.2.5.1
dcGenericAlarmEntry	1.3.6.1.4.1.20246.2.3.1.1.1.2.2.12.1		not-accessible	A particular generic alarm entry.
G32 dcGenericAlarmEventIdentifier	1.3.6.1.4.1.20246.2.3.1.1.1.2.2.12.1.3	Gauge32	read-only	Unique numeric identifier of the assigned alarm event. Zero if not configured.
STR dcGenericAlarmEventName	1.3.6.1.4.1.20246.2.3.1.1.1.2.2.12.1.2	DisplayString	read-only	Plain text name of the assigned alarm event. Empty if not configured.
INT dcGenericAlarmEventValue	1.3.6.1.4.1.20246.2.3.1.1.1.2.2.12.1.4	INTEGER	read-only	Current value of the assigned alarm event. Value is false if not configured.
I32 dcGenericAlarmIndex	1.3.6.1.4.1.20246.2.3.1.1.1.2.2.12.1.1	Integer32	not-accessible	Table index.
dcGenericAlarmTable	1.3.6.1.4.1.20246.2.3.1.1.1.2.2.12		not-accessible	Table that shows ten alarm event assignments that can be configured via WEB interface.
dcInputOutput	1.3.6.1.4.1.20246.2.3.1.1.1.2.6
G32 dcInterval	1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.3	Gauge32	read-only	Minimal time between programmed battery tests. Zero indicates that this value is not set.
I32 dcLoadCurrent	1.3.6.1.4.1.20246.2.3.1.1.1.2.3.2	Integer32	read-only	The measured load current. The max. value 2147483647 is used to indicate an invalid value.
INT dcMainsFailureAlarm	1.3.6.1.4.1.20246.2.3.1.1.1.2.2.5	INTEGER	read-only	Mains failure alarm.
dcMisc	1.3.6.1.4.1.20246.2.3.1.1.1.2.7
G32 dcNonUrgentAlarmIdentifier	1.3.6.1.4.1.20246.2.3.1.1.1.2.2.8	Gauge32	read-only	Current unique non urgent alarm event identifier. A zero value indicates that non urgent alarm is not active.
STR dcNonUrgentAlarmName	1.3.6.1.4.1.20246.2.3.1.1.1.2.2.11	DisplayString	read-only	Current alarm name for active non urgent alarm that corresponds to non urgent alarm identifier.
INT dcNonUrgentAlarmValue	1.3.6.1.4.1.20246.2.3.1.1.1.2.2.9	INTEGER	read-only	Current non urgent alarm event status that corresponds to non urgent alarm identifier. If the non urgent alarm identifier is zero then the alarm value is false.
G32 dcNumberNonUrgentAlarms	1.3.6.1.4.1.20246.2.3.1.1.1.2.2.4	Gauge32	read-only	Number of currently active non urgent alarm sources. A zero value indicates that non urgent alarm is not active.
G32 dcNumberRectifiers	1.3.6.1.4.1.20246.2.3.1.1.1.2.4.1	Gauge32	read-only	The configured number of rectifiers plugged into the system. The maximum number of rectifiers is 128.
G32 dcNumberRectifiersFailure	1.3.6.1.4.1.20246.2.3.1.1.1.2.4.2	Gauge32	read-only	Number of rectifiers that are not properly working.
G32 dcNumberRectifiersOkay	1.3.6.1.4.1.20246.2.3.1.1.1.2.4.3	Gauge32	read-only	Number of rectifiers that are properly working.
G32 dcNumberUrgentAlarmsEx	1.3.6.1.4.1.20246.2.3.1.1.1.2.2.3	Gauge32	read-only	Number of currently active urgent alarm sources. A zero value indicates that urgent alarm is not active.
dcRectifier	1.3.6.1.4.1.20246.2.3.1.1.1.2.4
I32 dcRectifierCurrent	1.3.6.1.4.1.20246.2.3.1.1.1.2.3.7	Integer32	read-only	Total current of all working rectifier modules. The maximum value 2147483647 is used to indicate an invalid value.
dcRectifierEntry	1.3.6.1.4.1.20246.2.3.1.1.1.2.4.4.1		not-accessible	A particular rectifier entry.
STR dcRectifierIdentifier	1.3.6.1.4.1.20246.2.3.1.1.1.2.4.4.1.2	DisplayString	read-only	Unique rectifier identifier. If positioning active the position number scheme is used otherwise the rectifier instance is used to identify a rectifier.
I32 dcRectifierIndex	1.3.6.1.4.1.20246.2.3.1.1.1.2.4.4.1.1	Integer32	not-accessible	Table index.
INT dcRectifierStatus	1.3.6.1.4.1.20246.2.3.1.1.1.2.4.4.1.3	INTEGER	read-only	Specifies status of rectifiers.
dcRectifierTable	1.3.6.1.4.1.20246.2.3.1.1.1.2.4.4		not-accessible	Table that shows all currently active rectifier modules.
INT dcSetupConfiguration	1.3.6.1.4.1.20246.2.3.1.1.1.2.7.3	INTEGER	read-write	Save current setup configuration to non-volatile memory.
STR dcSiteName	1.3.6.1.4.1.20246.2.3.1.1.1.2.1.1	DisplayString	read-only	An administratively-assigned site name for this DC-power system.
STR dcSoftwareVersion	1.3.6.1.4.1.20246.2.3.1.1.1.2.1.4	DisplayString	read-only	The controller's software version e.g V2.50Build1.
dcSystemAlarms	1.3.6.1.4.1.20246.2.3.1.1.1.2.2
STR dcSystemDateTime	1.3.6.1.4.1.20246.2.3.1.1.1.2.1.3	DisplayString	read-write	ISO 8601 representation of controller's local date/time. The value is in the format YYYY-MM-DDThh:mm:ss. An example of a valid string is: '2004-10-04T13:45:00'.
dcSystemInfo	1.3.6.1.4.1.20246.2.3.1.1.1.2.1
dcSystemMonitor	1.3.6.1.4.1.20246.2.3.1.1.1.2.3
STR dcSystemName	1.3.6.1.4.1.20246.2.3.1.1.1.2.1.2	DisplayString	read-only	An administratively-assigned system name for this DC-power system.
G32 dcSystemPower	1.3.6.1.4.1.20246.2.3.1.1.1.2.3.8	Gauge32	read-only	Calculated system power. The maximum value 4294967295 is used to indicate an invalid value.
I32 dcSystemVoltage	1.3.6.1.4.1.20246.2.3.1.1.1.2.3.1	Integer32	read-only	The measured system voltage. The max. value 2147483647 is used to indicate an invalid value.
I32 dcTcHigh	1.3.6.1.4.1.20246.2.3.1.1.1.2.5.1.4	Integer32	read-only	High limit for the area in which the temperature compensation is active. The maximum value 2147483647 is used to indicate an invalid value.
I32 dcTcLow	1.3.6.1.4.1.20246.2.3.1.1.1.2.5.1.3	Integer32	read-only	Low limit for the area in which the temperature compensation is active. The maximum value 2147483647 is used to indicate an invalid value.
I32 dcTcoeff	1.3.6.1.4.1.20246.2.3.1.1.1.2.5.1.2	Integer32	read-only	Temperature compensation coefficient for system voltage. The maximum value 2147483647 is used to indicate an invalid value.
STR dcTestDateTime	1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.2.1	DisplayString	read-only	ISO 8601 representation of the last performed battery test. The value is in the format YYYY-MM-DDThh:mm:ss. This parameter is valid only if there is a test result available.
I32 dcTestEndVoltage	1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.2.3	Integer32	read-only	System voltage at the end of the last performed battery test. The maximum value 2147483647 is used to indicate an invalid value.
INT dcTestResult	1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.2.2	INTEGER	read-only	Result of last performed battery test.
G32 dcTotalBatteryCapacity	1.3.6.1.4.1.20246.2.3.1.1.1.2.5.3.1	Gauge32	read-only	Total battery capacity for all available batteries.
dcTrapDestinationEntry	1.3.6.1.4.1.20246.2.3.1.1.1.2.7.1.1		not-accessible	A particular trap destination entry.
I32 dcTrapDestinationIndex	1.3.6.1.4.1.20246.2.3.1.1.1.2.7.1.1.1	Integer32	not-accessible	Table index.
IP dcTrapDestinationIp	1.3.6.1.4.1.20246.2.3.1.1.1.2.7.1.1.2	IpAddress	read-write	IP address of the trap destination. Value is 0.0.0.0 if IP address is not configured.
G32 dcTrapDestinationPort	1.3.6.1.4.1.20246.2.3.1.1.1.2.7.1.1.3	Gauge32	read-write	Port number of the trap destination. By default port 162 is used.
dcTrapDestinationTable	1.3.6.1.4.1.20246.2.3.1.1.1.2.7.1		not-accessible	Trap table that shows all configured trap destinations.
G32 dcUrgentAlarmIdentifier	1.3.6.1.4.1.20246.2.3.1.1.1.2.2.6	Gauge32	read-only	Current unique urgent alarm event identifier. A zero value indicates that urgent alarm is not active.
STR dcUrgentAlarmName	1.3.6.1.4.1.20246.2.3.1.1.1.2.2.10	DisplayString	read-only	Current alarm name for urgent alarm that corresponds to urgent alarm identifier.
INT dcUrgentAlarmValue	1.3.6.1.4.1.20246.2.3.1.1.1.2.2.7	INTEGER	read-only	Current urgent alarm event status that corresponds to the urgent alarm identifier. If the urgent alarm identifier is zero then the alarm value is false.
I32 dcUsupport	1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.1	Integer32	read-only	Support charge voltage for the battery. The maximum value 2147483647 is used to indicate an invalid value.
I32 dcUsys20	1.3.6.1.4.1.20246.2.3.1.1.1.2.5.1.1	Integer32	read-only	Voltage to regulate to at 20oC. If temperature compensation is used, this voltage will vary. The maximum value 2147483647 is used to indicate an invalid value.
deschAlarmTableGroup	1.3.6.1.4.1.20246.2.3.1.1.1.1.1.6			The collection of alarm table objects.
deschBatteryGroup	1.3.6.1.4.1.20246.2.3.1.1.1.1.1.10			The collection of battery scalar objects.
deschControlEventTableGroup	1.3.6.1.4.1.20246.2.3.1.1.1.1.1.11			Assignment of control events to table entries.
deschControllerBasicCompl	1.3.6.1.4.1.20246.2.3.1.1.1.1.2.1			The basic implementation requirements for the controller MIB.
deschControllerCompl	1.3.6.1.4.1.20246.2.3.1.1.1.1.2
deschControllerConfs	1.3.6.1.4.1.20246.2.3.1.1.1.1
deschControllerEventObjects	1.3.6.1.4.1.20246.2.3.1.1.1.3.1
deschControllerEvents	1.3.6.1.4.1.20246.2.3.1.1.1.3
deschControllerEventsV2	1.3.6.1.4.1.20246.2.3.1.1.1.3.1.0
deschControllerGroups	1.3.6.1.4.1.20246.2.3.1.1.1.1.1
deschControllerObjects	1.3.6.1.4.1.20246.2.3.1.1.1.2
deschEventHistoryTableGroup	1.3.6.1.4.1.20246.2.3.1.1.1.1.1.5			The collection of event history table objects.
deschGenericAlarmTableGroup	1.3.6.1.4.1.20246.2.3.1.1.1.1.1.9			Assignment of events to alarm table entries.
deschMiscGroup	1.3.6.1.4.1.20246.2.3.1.1.1.1.1.13			The collection of miscellaneous objects.
deschNotificationsGroup	1.3.6.1.4.1.20246.2.3.1.1.1.1.1.8			The group of all controller notifications.
deschPsc3BaseMib	1.3.6.1.4.1.20246.2.3.1.1.1
deschPsc3BaseMibModule	1.3.6.1.4.1.20246.2.1.1.2			MIB for managing a DC power system with PSC 3.
deschRectifiersGroup	1.3.6.1.4.1.20246.2.3.1.1.1.1.1.4			The collection of rectifier scalar objects.
deschRectifierTableGroup	1.3.6.1.4.1.20246.2.3.1.1.1.1.1.7			The collection of rectifier table objects.
deschSystemAlarmGroup	1.3.6.1.4.1.20246.2.3.1.1.1.1.1.2			The collection of system alarm scalar objects.
deschSystemInfoGroup	1.3.6.1.4.1.20246.2.3.1.1.1.1.1.1			The collection of system info scalar objects.
deschSystemMonitorGroup	1.3.6.1.4.1.20246.2.3.1.1.1.1.1.3			The collection of system monitor scalar objects.
deschTrapDestinationTableGroup	1.3.6.1.4.1.20246.2.3.1.1.1.1.1.12			Trap destionation table.
NTF systemNonUrgentAlarm	1.3.6.1.4.1.20246.2.3.1.1.1.3.1.0.1			The controller reports that one or more elements have changed into none urgent alarm state.
NTF systemUrgentAlarm	1.3.6.1.4.1.20246.2.3.1.1.1.3.1.0.2			The controller reports that one or more elements have changed into urgent alarm state.

RFC description

Delta Electronics DC power system management MIB for PSC3 controller hardware, providing monitoring and control of rectifier modules, battery operations, system measurements, and SNMP trap destinations.

Start monitoring Delta Energy Systems (Switzerland) AG DC power system (PSC 3) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DESCH-PSC3-BASE-MIB