ZXR10-L2VPN-OBJECT-MIB

All MIBs › ZXR10-L2VPN-OBJECT-MIB

Organization: Multiprotocol Label Switching (mpls) Working Group

Last Updated: 2001-08-16

Category: ZTE ZXR10 L2VPN and L3VPN

Description: Specifies ZTE ZXR10 L2VPN object definitions for pseudowire endpoints, attachment circuits, and service instances.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-L2VPN-OBJECT-MIB?

ZXR10-L2VPN-OBJECT-MIB is a ZTE proprietary SNMP module for the ZXR10 platform that defines object-level detail for MPLS Layer 2 VPN services, covering pseudowire endpoints, attachment circuits, and service instances. It exposes both configuration data (object type, name) and operational counters related to MAC address learning limits within each L2VPN service instance. This MIB is used to monitor the software/service status of L2VPN instances on the device, particularly MAC-learning behavior — how many static and learned MAC addresses exist versus configured maximums, and what action is taken when a learning-limit is exceeded — which helps detect MAC-table exhaustion or flooding issues within a given service. It builds directly on the IETF MPLS Layer 2 VPN framework referenced in its description and likely complements other ZXR10 MPLS/pseudowire MIBs. It is deployed on ZTE ZXR10 routers used as PE devices delivering Ethernet-based L2VPN/pseudowire services in carrier networks. Engineers can download the ZXR10-L2VPN-OBJECT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-L2VPN-OBJECT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXR10 router (MPLS PE device)

Monitoring Examples

An operator polls the zxr10L2vpnObjectTable/zxr10L2vpnObjectEntry, keyed by zxr10L2vpnObjectType and zxr10L2vpnObjectName, to read zxr10L2vpnObjectCounterMacsMaximum, zxr10L2vpnObjectCounterStaticMacs, and zxr10L2vpnObjectLimitCounterLearnedMacsMaximum. If zxr10L2vpnObjectCounterStaticMacs approaches zxr10L2vpnObjectLimitCounterStaticMacsMaximum, or zxr10L2vpnObjectLimitCounterLearnedMacsAction shows a drop/shutdown action triggered, it indicates the L2VPN instance is experiencing MAC-table pressure or a MAC-flooding event on the attachment circuit.

What Can Be Monitored

L2VPN service instance state
static MAC address count
learned MAC address count
MAC learning limit and action
MAC learning rate limit

Imported Objects

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE
enterprises

OIDs

OID symbolic	OID numeric	Type	Access	Description
zte	1.3.6.1.4.1.3902
zxr10	1.3.6.1.4.1.3902.3
zxr10L2vpn	1.3.6.1.4.1.3902.3.104
l2vpnObjectMIB	1.3.6.1.4.1.3902.3.104.10			This MIB contains managed object definitions for the 'MPLS Layer 2 Virtual Private Networks ' document.
zxr10L2vpnObjectTable	1.3.6.1.4.1.3902.3.104.10.7		not-accessible	L2vpn Object Table. This table contains one entry per object table.
zxr10L2vpnObjectEntry	1.3.6.1.4.1.3902.3.104.10.7.1		not-accessible	The parameter of an object entity containing statistics information about a particular vpls.
INT zxr10L2vpnObjectType	1.3.6.1.4.1.3902.3.104.10.7.1.1	INTEGER	read-only	The type of object.There are several types of object:(1)Virtual Private LAN Service(VPLS),and (2)Service Attachment Circuit(Sac) ,and(3)Service Distribution Unit(Sdu),and (4)Pseudowires(PW).
OCT zxr10L2vpnObjectName	1.3.6.1.4.1.3902.3.104.10.7.1.2	OCTET STRING	read-only	The name of the object.
INT zxr10L2vpnObjectNamePostfix	1.3.6.1.4.1.3902.3.104.10.7.1.3	INTEGER	read-only	The postfix of the object's name.
INT zxr10L2vpnObjectCounterMacsMaximum	1.3.6.1.4.1.3902.3.104.10.7.1.4	INTEGER	read-only	Couter macs maximum specified for each configured L2vpn.
INT zxr10L2vpnObjectCounterStaticMacs	1.3.6.1.4.1.3902.3.104.10.7.1.5	INTEGER	read-only	Couter static macs specified for each configured L2vpn.
INT zxr10L2vpnObjectLimitCounterStaticMacsMaximum	1.3.6.1.4.1.3902.3.104.10.7.1.6	INTEGER	read-only	Couter static macs maximum limit specified for each configured L2vpn.
INT zxr10L2vpnObjectLimitCounterLearnedMacsMaximum	1.3.6.1.4.1.3902.3.104.10.7.1.7	INTEGER	read-only	Couter learned macs maximum limit specified for each configured L2vpn.
INT zxr10L2vpnObjectLimitCounterLearnedMacsAction	1.3.6.1.4.1.3902.3.104.10.7.1.8	INTEGER	read-only	Couter Learned Macs action limit specified for each configured L2vpn.
INT zxr10L2vpnObjectLimitRateMacLearningMaximum	1.3.6.1.4.1.3902.3.104.10.7.1.9	INTEGER	read-only	Mac learning limit rate specified for each configured L2vpn.
INT zxr10L2vpnObjectLimitRateMacLearningAction	1.3.6.1.4.1.3902.3.104.10.7.1.10	INTEGER	read-only	Mac learning action limit rate specified for each configured L2vpn.
INT zxr10L2vpnObjectLimitRateMacLearningHoldingTime	1.3.6.1.4.1.3902.3.104.10.7.1.11	INTEGER	read-only	Mac learning holding time limit rate specified for each configured L2vpn.
INT zxr10L2vpnObjectLimitRateMacMovingMaximum	1.3.6.1.4.1.3902.3.104.10.7.1.12	INTEGER	read-only	Mac moving maximum limit rate specified for each configured L2vpn.
INT zxr10L2vpnObjectLimitRateMacMovingAction	1.3.6.1.4.1.3902.3.104.10.7.1.13	INTEGER	read-only	Mac moving action limit rate specified for each configured L2vpn.
INT zxr10L2vpnObjectLimitRateMacMovingHoldingTime	1.3.6.1.4.1.3902.3.104.10.7.1.14	INTEGER	read-only	Mac moving holding time limit rate specified for each configured L2vpn.
INT zxr10L2vpnObjectLimitRateBroadcastMaximum	1.3.6.1.4.1.3902.3.104.10.7.1.15	INTEGER	read-only	Mac broadcast maximum limit rate specified for each configured L2vpn.
INT zxr10L2vpnObjectLimitRateBroadcastAction	1.3.6.1.4.1.3902.3.104.10.7.1.16	INTEGER	read-only	Mac broadcast action limit rate specified for each configured L2vpn.
INT zxr10L2vpnObjectLimitRateBroadcastHoldingTime	1.3.6.1.4.1.3902.3.104.10.7.1.17	INTEGER	read-only	Mac broadcast holding time limit rate specified for each configured L2vpn.
INT zxr10L2vpnObjectLimitRateMulticastMaximum	1.3.6.1.4.1.3902.3.104.10.7.1.18	INTEGER	read-only	Mac multicast maximum limit rate specified for each configured L2vpn.
INT zxr10L2vpnObjectLimitRateMulticastAction	1.3.6.1.4.1.3902.3.104.10.7.1.19	INTEGER	read-only	Mac multicast action limit rate specified for each configured L2vpn.
INT zxr10L2vpnObjectLimitRateMulticastHoldingTime	1.3.6.1.4.1.3902.3.104.10.7.1.20	INTEGER	read-only	Mac multicast holding time limit rate specified for each configured L2vpn.
INT zxr10L2vpnObjectLimitRateUnknownUnicastMaximum	1.3.6.1.4.1.3902.3.104.10.7.1.21	INTEGER	read-only	Mac unknown unicast maximum limit rate specified for each configured L2vpn.
INT zxr10L2vpnObjectLimitRateUnknownUnicastAction	1.3.6.1.4.1.3902.3.104.10.7.1.22	INTEGER	read-only	Mac unknown unicast action limit rate specified for each configured L2vpn.
INT zxr10L2vpnObjectLimitRateUnknownUnicastHoldingTime	1.3.6.1.4.1.3902.3.104.10.7.1.23	INTEGER	read-only	Mac unknown unicast holding time limit rate specified for each configured L2vpn.
INT zxr10L2vpnObjectTrackSessionName	1.3.6.1.4.1.3902.3.104.10.7.1.24	INTEGER	read-only	The track session name of the object.
INT zxr10L2vpnObjectSwitchMacLearning	1.3.6.1.4.1.3902.3.104.10.7.1.25	INTEGER	read-only	The switch of mac learnint to the object.
INT zxr10L2vpnObjectSwitchMacMoving	1.3.6.1.4.1.3902.3.104.10.7.1.26	INTEGER	read-only	The switch of mac moving to the object.
INT zxr10L2vpnObjectStatCounterDynamicMacs	1.3.6.1.4.1.3902.3.104.10.7.1.27	INTEGER	read-only	The stat counter of dynamic macs to the object.
INT zxr10L2vpnObjectStatForwardStatus	1.3.6.1.4.1.3902.3.104.10.7.1.28	INTEGER	read-only	The stat of forward status to the object.

RFC description

Layer 2 Virtual Private Networks (L2VPN) objects including VPLS statistics, MAC learning, and MPLS configuration.

Start monitoring ZTE ZXR10 router (MPLS PE device) (L2VPN-instance MAC-learning-limit status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-L2VPN-OBJECT-MIB

What Is ZXR10-L2VPN-OBJECT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description