-- ***************************************************************** -- ZXR10_L2VPN_MIB.mib -- MPLS Layer 2 Virtual Private Networks MIB Definitions -- yaojie10102482 -- 2010-05-12 -- -- Copyright (c) 1985-2010 by ZTE Corp. -- All rights reserved. -- ***************************************************************** -- ZXR10-L2VPN-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE,MODULE-IDENTITY, Integer32,Counter32,Unsigned32,enterprises, IpAddress FROM SNMPv2-SMI DisplayString,TEXTUAL-CONVENTION FROM SNMPv2-TC; zte MODULE-IDENTITY LAST-UPDATED "201005170000Z" ORGANIZATION "ZTE Corporation" CONTACT-INFO "ZTE Corporation Nanjing Institute of ZTE Corporation No.68 Zijinghua Rd. Yuhuatai District, Nanjing, China Tel: +86-25-52870000" DESCRIPTION "This MIB contains managed object definitions for the ZXROSng L2vpn" ::= { enterprises 3902 } zxr10 OBJECT IDENTIFIER ::= { zte 3} zxr10l2vpn OBJECT IDENTIFIER ::= { zxr10 104} zxr10l2vpnObjects OBJECT IDENTIFIER ::= { zxr10l2vpn 10} zxr10l2vpnGlobalPara OBJECT IDENTIFIER ::= { zxr10l2vpnObjects 10} L2vpnPWType ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "L2vpn PW Type. Assigned values are specified in 'IANA Allocations for Pseudowire Edge to Edge Emulation (PWE3)" SYNTAX INTEGER { unknown(0), fr-dlci-martini(1), aal5-sdu(2), atm-cell(3), vlan(4), ethernet(5), hdlc(6), ppp(7), sdh-cesom(8), atm-vccn(9), atm-vpcn(10), ip(11), atm-vcc1(12), atm-vpc1(13), aal5-pdu(14), fr-port(15), sdh-ceop(16), e1(17), t1-ds1(18), e3(19), t3-ds3(20), cesopsn(21), tdm-aal1(22), tdm-with-cas(23), tdm-aal2(24), fr-dlct(25) } L2vpnVplsPolicy ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "L2vpn Vpls Policy." SYNTAX INTEGER { tunnelling(1), discarding(2), terminating(3), tunnellingMonitor(4) } --******************************************** --definition of tables:: --******************************************** --*************zxr10L2vpnGlobalPwPara*************** zxr10L2vpnGlobalPWCapatity OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION " The summary information about max_num of PWs'configuration." ::= { zxr10l2vpnGlobalPara 1 } zxr10L2vpnGlobalPWUsed OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The summary information about current_num of PWs'configuration." ::= { zxr10l2vpnGlobalPara 2 } --*************zxr10L2vpnEnable*************** zxr10L2vpnEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable L2VPN service." ::= { zxr10l2vpnObjects 20 } --*************zxr10L2vpnSduTable*************** zxr10L2vpnSduTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10L2vpnSduEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Sdu Table. This table contains one entry per sdu table." ::= { zxr10l2vpnObjects 1 } zxr10L2vpnSduEntry OBJECT-TYPE SYNTAX Zxr10L2vpnSduEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The parameter of a Sdu entity containing " INDEX { zxr10L2vpnSduServiceName, zxr10L2vpnSduName } ::= { zxr10L2vpnSduTable 1 } Zxr10L2vpnSduEntry ::= SEQUENCE { zxr10L2vpnSduServiceName DisplayString, zxr10L2vpnSduName DisplayString, zxr10L2vpnSduServiceType INTEGER, zxr10L2vpnSduRedandancyMgrName DisplayString, zxr10L2vpnSduRedundancyPrimaryPwPeer IpAddress, zxr10L2vpnSduRedundancyPrimaryPwVcid Unsigned32, zxr10L2vpnSduRedundancyPrimaryPwVcType L2vpnPWType, zxr10L2vpnSduRedundancyBackupPwPeer IpAddress, zxr10L2vpnSduRedundancyBackupPwVcid Unsigned32, zxr10L2vpnSduRedundancyBackupPwVcType L2vpnPWType } zxr10L2vpnSduServiceName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the service instance.It consists of 'Forwarder' modules connected by pseudowires and Attach Circuit." ::= { zxr10L2vpnSduEntry 1 } zxr10L2vpnSduName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of Service Distribution Unit (SDU)." ::= { zxr10L2vpnSduEntry 2 } zxr10L2vpnSduServiceType OBJECT-TYPE SYNTAX INTEGER { unknown(0), vpls(1), vpws(2), mspw(3), enhanced-vpws(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of service instance.There are several types of L2VPNs:(1)Virtual Private LAN Service(VPLS), and (2)Ethernet over PW,and (3)Multi-segment Pseudowire(MSPW), and (4)Enhanced-Ethernet over Pseudowire" ::= { zxr10L2vpnSduEntry 3 } zxr10L2vpnSduRedandancyMgrName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of Redundency-manager." ::= { zxr10L2vpnSduEntry 4 } zxr10L2vpnSduRedundancyPrimaryPwPeer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The PW's remote endpoint address." ::= { zxr10L2vpnSduEntry 5 } zxr10L2vpnSduRedundancyPrimaryPwVcid OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "A non-zero 32-bit connection ID that, together with the PW type, identifies a particular PW. Note that the PW ID and the PW type MUST be the same at both endpoints." ::= { zxr10L2vpnSduEntry 6 } zxr10L2vpnSduRedundancyPrimaryPwVcType OBJECT-TYPE SYNTAX L2vpnPWType MAX-ACCESS read-only STATUS current DESCRIPTION "A 15-bit quantity containing a value that represents the type of PW. Assigned values are specified in 'IANA Allocations for Pseudowire Edge to Edge Emulation (PWE3)'." ::= { zxr10L2vpnSduEntry 7 } zxr10L2vpnSduRedundancyBackupPwPeer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The PW's remote endpoint address." ::= { zxr10L2vpnSduEntry 8 } zxr10L2vpnSduRedundancyBackupPwVcid OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "A non-zero 32-bit connection ID that, together with the PW type, identifies a particular PW. Note that the PW ID and the PW type MUST be the same at both endpoints." ::= { zxr10L2vpnSduEntry 9 } zxr10L2vpnSduRedundancyBackupPwVcType OBJECT-TYPE SYNTAX L2vpnPWType MAX-ACCESS read-only STATUS current DESCRIPTION "A 15-bit quantity containing a value that represents the type of PW. Assigned values are specified in 'IANA Allocations for Pseudowire Edge to Edge Emulation (PWE3)'." ::= { zxr10L2vpnSduEntry 10 } --*************zxr10L2vpnSacTable*************** zxr10L2vpnSacTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10L2vpnSacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Sac Table. This table contains one entry per Sac table." ::= { zxr10l2vpnObjects 2 } zxr10L2vpnSacEntry OBJECT-TYPE SYNTAX Zxr10L2vpnSacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The parameter of a Sac entity containing " INDEX { zxr10L2vpnSacServiceName, zxr10L2vpnSacName } ::= { zxr10L2vpnSacTable 1 } Zxr10L2vpnSacEntry ::= SEQUENCE { zxr10L2vpnSacServiceName DisplayString, zxr10L2vpnSacName DisplayString, zxr10L2vpnSacServiceType INTEGER, zxr10L2vpnSacServiceDefine INTEGER, zxr10L2vpnSacEthSwitchSplitHorizone INTEGER, zxr10L2vpnSacEthIngressAdjustType INTEGER, zxr10L2vpnSacEthPushedTag Integer32, zxr10L2vpnSacEthRewriteTargetTag Integer32, zxr10L2vpnSacTdmJitterBuffer Integer32, zxr10L2vpnSacTdmDistributePeriod Integer32, zxr10L2vpnSacTdmTimeslots Unsigned32, zxr10L2vpnSacTdmStructureType INTEGER, zxr10L2vpnSacEthSwitchGroupID Integer32, zxr10L2vpnSacInterworking INTEGER, zxr10L2vpnSacInterworkingIpLocalCeMac DisplayString } zxr10L2vpnSacServiceName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the service instance.It consists of 'Forwarder' modules connected by pseudowires and Attach Circuit." ::= { zxr10L2vpnSacEntry 1 } zxr10L2vpnSacName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of Service Attachment Circuit(SAC)." ::= { zxr10L2vpnSacEntry 2 } zxr10L2vpnSacServiceType OBJECT-TYPE SYNTAX INTEGER { unknown(0), vpls(1), vpws(2), vlss(4), enhanced-vpws(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of service instance.There are several types of L2VPNs:(1)Virtual Private LAN Service(VPLS), and (2)Virtual Private Wire Service(VPWS),and (3)Virtual Local Switching Service(VLSS),and (4)Enhanced-Virtual Private Wire Service(Enhanced-VPWS) ;" ::= { zxr10L2vpnSacEntry 3 } zxr10L2vpnSacServiceDefine OBJECT-TYPE SYNTAX INTEGER { ethernt(1), tdm(2), ppp(3), hdlc(4), fr(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The parameter of service accesse.There are several parameters of service accesse:(1)ethernt,(2)tdm, (3)ppp,(4)hdlc,(5)fr." ::= { zxr10L2vpnSacEntry 4 } zxr10L2vpnSacEthSwitchSplitHorizone OBJECT-TYPE SYNTAX INTEGER { null(0), on(1), off(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Split-horizon attribute which used in E-tree service includes two types client/server " ::= { zxr10L2vpnSacEntry 5 } zxr10L2vpnSacEthIngressAdjustType OBJECT-TYPE SYNTAX INTEGER { unknown(0), needless(1), push(2), pop-outermost(3), rewrite(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Type of VLAN tag ingress-adjustment.It consists of (1)needless,(2)push,(3)pop-outermost,(4)rewrite" ::= { zxr10L2vpnSacEntry 20 } zxr10L2vpnSacEthPushedTag OBJECT-TYPE SYNTAX Integer32(0..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "A service-delimiting tag which pushed onto the incoming packets." ::= { zxr10L2vpnSacEntry 21 } zxr10L2vpnSacEthRewriteTargetTag OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "A VLAN tag which rewirted to replace the service-delimiting tags." ::= { zxr10L2vpnSacEntry 22 } zxr10L2vpnSacTdmJitterBuffer OBJECT-TYPE SYNTAX Integer32(2..64) MAX-ACCESS read-only STATUS current DESCRIPTION "The jitter-buffer size of TDM emulation." ::= { zxr10L2vpnSacEntry 23 } zxr10L2vpnSacTdmDistributePeriod OBJECT-TYPE SYNTAX Integer32(1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "Tthe period of distributing TDM packets to remote end-point." ::= { zxr10L2vpnSacEntry 24 } zxr10L2vpnSacTdmTimeslots OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The time of TDM slots." ::= { zxr10L2vpnSacEntry 25 } zxr10L2vpnSacTdmStructureType OBJECT-TYPE SYNTAX INTEGER { aware(1), agnostic(2), aware-with-cas(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The structure type of TDM emulation." ::= { zxr10L2vpnSacEntry 26 } zxr10L2vpnSacEthSwitchGroupID OBJECT-TYPE SYNTAX Integer32(0..64) MAX-ACCESS read-only STATUS current DESCRIPTION "Split-horizon-Group attribute. " ::= { zxr10L2vpnSacEntry 27 } zxr10L2vpnSacInterworking OBJECT-TYPE SYNTAX INTEGER{ none(0), ip(1), ethernet(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The name of SacInterworking." ::= { zxr10L2vpnSacEntry 28 } zxr10L2vpnSacInterworkingIpLocalCeMac OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The LocalCeMac of SacInterworking." ::= { zxr10L2vpnSacEntry 29 } --*************zxr10L2vpnRedundancyTable*************** zxr10L2vpnRedundancyTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10L2vpnRedundancyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Redundancy Table. This table contains one entry per Redundancy table." ::= { zxr10l2vpnObjects 3 } zxr10L2vpnRedundancyEntry OBJECT-TYPE SYNTAX Zxr10L2vpnRedundancyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The parameter of a Redundancy entity containing " INDEX { zxr10L2vpnRedundancyName } ::= { zxr10L2vpnRedundancyTable 1 } Zxr10L2vpnRedundancyEntry ::= SEQUENCE { zxr10L2vpnRedundancyName DisplayString, zxr10L2vpnRedundancySduName DisplayString, zxr10L2vpnRedundancyProtectMode INTEGER, zxr10L2vpnRedundancyPfsNegoMode INTEGER, zxr10L2vpnRedundancyProtectPolicy INTEGER, zxr10L2vpnRedundancyProtectDelayTime Integer32, zxr10L2vpnRedundancyRevertPolicy INTEGER, zxr10L2vpnRedundancyRevertDelayTime Integer32, zxr10L2vpnRedundancyActivePWs INTEGER, zxr10L2vpnRedundancyStandbyPWs INTEGER, zxr10L2vpnRedundancyInvalidPWs INTEGER, zxr10L2vpnRedundancyProtectionCount Counter32, zxr10L2vpnRedundancyLastProtectionTime Unsigned32 } zxr10L2vpnRedundancyName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of redundency-management." ::= { zxr10L2vpnRedundancyEntry 1 } zxr10L2vpnRedundancySduName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of Service Distribution Unit (SDU) belongs to the exact redundency-management instance." ::= { zxr10L2vpnRedundancyEntry 2 } zxr10L2vpnRedundancyProtectMode OBJECT-TYPE SYNTAX INTEGER { oneByOne(1), onePlusOne(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The protectmode of redundency-management instance. There are two modes: (1)oneByOne, (2)onePlusOne" ::= { zxr10L2vpnRedundancyEntry 3 } zxr10L2vpnRedundancyPfsNegoMode OBJECT-TYPE SYNTAX INTEGER { unsupported(1), independent(2), master(3), slave(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Configure the negotiation mode which include four modes :(1) unsupported, (2)independent, (3)master, (4)slave." ::= { zxr10L2vpnRedundancyEntry 4 } zxr10L2vpnRedundancyProtectPolicy OBJECT-TYPE SYNTAX INTEGER { immediately(1), delayed(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The protect-policy of transforming primary-pw into backup-pw.There are two policies:(1)immediately, (2)delayed." ::= { zxr10L2vpnRedundancyEntry 5 } zxr10L2vpnRedundancyProtectDelayTime OBJECT-TYPE SYNTAX Integer32(10..180) MAX-ACCESS read-only STATUS current DESCRIPTION "The time of transforming primary-pw into backup-pw." ::= { zxr10L2vpnRedundancyEntry 6 } zxr10L2vpnRedundancyRevertPolicy OBJECT-TYPE SYNTAX INTEGER { immediately(1), delayed(2), never(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The protectpolicy of transforming primary-pw from backup-pw. There are two policies:(1)immediately, (2)delayed." ::= { zxr10L2vpnRedundancyEntry 7 } zxr10L2vpnRedundancyRevertDelayTime OBJECT-TYPE SYNTAX Integer32(10..180) MAX-ACCESS read-only STATUS current DESCRIPTION "The time of transforming primary-pw from backup-pw." ::= { zxr10L2vpnRedundancyEntry 8 } zxr10L2vpnRedundancyActivePWs OBJECT-TYPE SYNTAX INTEGER { primary(1), backup(2), none(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The statues of current active-pws.There are three statues:(1)primary,(2)backup,(3)none." ::= { zxr10L2vpnRedundancyEntry 9 } zxr10L2vpnRedundancyStandbyPWs OBJECT-TYPE SYNTAX INTEGER { primary(1), backup(2), none(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The statues of current standby-pws.There are three statues:(1)primary,(2)backup,(3)none." ::= { zxr10L2vpnRedundancyEntry 10 } zxr10L2vpnRedundancyInvalidPWs OBJECT-TYPE SYNTAX INTEGER { primary(1), backup(2), none(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The statues of current invalid-pws.There are three statues:(1)primary,(2)backup,(3)none." ::= { zxr10L2vpnRedundancyEntry 11 } zxr10L2vpnRedundancyProtectionCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of the pws switchover. Transforming primary-pw into backup-pw or transforming primary-pw from backup-pw means one." ::= { zxr10L2vpnRedundancyEntry 12 } zxr10L2vpnRedundancyLastProtectionTime OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The time of the last switchover, which ransform primary-pw into backup-pw or transform primary-pw from backup-pw." ::= { zxr10L2vpnRedundancyEntry 13 } --*************zxr10L2vpnPwTable*************** zxr10L2vpnPwTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10L2vpnPwEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Pw Table. This table contains one entry per pw table." ::= { zxr10l2vpnObjects 4 } zxr10L2vpnPwEntry OBJECT-TYPE SYNTAX Zxr10L2vpnPwEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The parameter of a pw entity containing statistics information about a particular PW." INDEX { zxr10L2vpnPwPeer, zxr10L2vpnPwVcid, zxr10L2vpnPwVcType } ::= { zxr10L2vpnPwTable 1 } Zxr10L2vpnPwEntry ::= SEQUENCE { zxr10L2vpnPwPeer IpAddress, zxr10L2vpnPwVcid Unsigned32, zxr10L2vpnPwVcType L2vpnPWType, zxr10L2vpnPwSduName DisplayString, zxr10L2vpnPwServiceName DisplayString, zxr10L2vpnPwServiceType INTEGER, zxr10L2vpnPwIsMspwSegment INTEGER, zxr10L2vpnPwLocalLabel Integer32, zxr10L2vpnPwRemoteLabel Integer32, zxr10L2vpnPwSignalType INTEGER, zxr10L2vpnPwLocalGroupId Integer32, zxr10L2vpnPwLocalCbit INTEGER, zxr10L2vpnPwLocalMTU Integer32, zxr10L2vpnPwLocalDescription DisplayString, zxr10L2vpnPwLocalStatusWord Unsigned32, zxr10L2vpnPwLocalStatusSignalAbility INTEGER, zxr10L2vpnPwRemoteGroupId Integer32, zxr10L2vpnPwRemoteCbit INTEGER, zxr10L2vpnPwRemoteMTU Integer32, zxr10L2vpnPwRemoteDescription DisplayString, zxr10L2vpnPwRemoteStatusWord Unsigned32, zxr10L2vpnPwRemoteStatusSignalAbility INTEGER, zxr10L2vpnPwNegoedCbit INTEGER, zxr10L2vpnPwNegoedMTU Integer32, zxr10L2vpnPwNegoedStatusSignalAbility INTEGER, zxr10L2vpnPwSignalState INTEGER, zxr10L2vpnPwVccvLocalParas Unsigned32, zxr10L2vpnPwVccvRemoteParas Unsigned32, zxr10L2vpnPwVccvNegoedParas Unsigned32, zxr10L2vpnPwPsnOutLabelDepth Integer32, zxr10L2vpnPwPsnOutLabel1 Integer32, zxr10L2vpnPwPsnOutLabel2 Integer32, zxr10L2vpnPwPsnOutLabel3 Integer32, zxr10L2vpnPwPsnTunnelType INTEGER, zxr10L2vpnPwPsnTunnelId Integer32, zxr10L2vpnPwSwitchMacWithdraw INTEGER, zxr10L2vpnPwServiceState INTEGER, zxr10L2vpnPwWorkState INTEGER, zxr10L2vpnPwSwitchSplitHorizone INTEGER, zxr10L3vpnPwSwitchGroupID Integer32 } zxr10L2vpnPwPeer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The PW's remote endpoint address." ::= { zxr10L2vpnPwEntry 1 } zxr10L2vpnPwVcid OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "A non-zero 32-bit connection ID that, together with the PW type, identifies a particular PW. Note that the PW ID and the PW type MUST be the same at both endpoints." ::= { zxr10L2vpnPwEntry 2 } zxr10L2vpnPwVcType OBJECT-TYPE SYNTAX L2vpnPWType MAX-ACCESS read-only STATUS current DESCRIPTION "A 15-bit quantity containing a value that represents the type of PW. Assigned values are specified in 'IANA Allocations for Pseudowire Edge to Edge Emulation (PWE3)'." ::= { zxr10L2vpnPwEntry 3 } zxr10L2vpnPwSduName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of Service Distribution Unit (SDU)." ::= { zxr10L2vpnPwEntry 4 } zxr10L2vpnPwServiceName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the service instance.It consists of 'Forwarder' modules connected by pseudowires and Attach Circuit." ::= { zxr10L2vpnPwEntry 5 } zxr10L2vpnPwServiceType OBJECT-TYPE SYNTAX INTEGER{ unknown(0), vpls(1), vpws(2), mspw(3), vlss(4), enhanced-vpws(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of service instance.There are several types of L2VPNs:(1)Virtual Private LAN Service(VPLS), and (2)Ethernet over PW,and (3)Multi-segment Pseudowire(MSPW), and (4)Virtual Local Switching Service(VLSS),and (5)Enhanced-Ethernet over Pseudowire" ::= { zxr10L2vpnPwEntry 6 } zxr10L2vpnPwIsMspwSegment OBJECT-TYPE SYNTAX INTEGER{ first(1), second(2), none(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The MSPW's ability weather the PW is MSPW's member." ::= { zxr10L2vpnPwEntry 7 } zxr10L2vpnPwLocalLabel OBJECT-TYPE SYNTAX Integer32(16..1048575) MAX-ACCESS read-only STATUS current DESCRIPTION "The PW's local label.When egress LER receives a packet over a pseudowire,the PW's local label must be able to determine that the packet was in fact received over a pseudowire associate with a particular pseudowire, and disposites the packet.In an MPLS-enabled IP network, a PW local label is an MPLS label used to identify packet with a PW that belongs to a particular Virtual Private Network." ::= { zxr10L2vpnPwEntry 8 } zxr10L2vpnPwRemoteLabel OBJECT-TYPE SYNTAX Integer32(16..1048575) MAX-ACCESS read-only STATUS current DESCRIPTION "The PW's remote label.When ingress LER sends a Layer 2 PDU to remote egress LER,it creates an MPLS packets by adding the PW's remote label to the packet,thus creating the first entry of the label stack.The PW's remote label is not visible again until the MPLS packet reaches the egress LER." ::= { zxr10L2vpnPwEntry 9 } zxr10L2vpnPwSignalType OBJECT-TYPE SYNTAX INTEGER { static(1), fec128(2), fec129(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of signaling,including (1)static PW,and (2) the Pwid FEC Element(FEC type 128),and the Generlized Pwid FEC Element(FEC type 129)." ::= { zxr10L2vpnPwEntry 10 } zxr10L2vpnPwLocalGroupId OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The PW's local GroupId value.It is an arbitrary 32-bit value that represents a group of PWs that is used to create groups in the PW space.The group ID is intended to be used as a port index, or a virtual tunnel index.To simplify configuration, a particular PW ID at ingress could be part of the virtual tunnel for transport to the egress router The Group ID is very useful for sending wild card label withdrawals, or PW wild card status notification messages to remote PEs upon physical port failure." ::= { zxr10L2vpnPwEntry 11 } zxr10L2vpnPwLocalCbit OBJECT-TYPE SYNTAX INTEGER{ off(0), on(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The PW's local ability weather it is supporting CBit. The bit (C) is used to flag the presence of a control word as follows:C = 1 Control word present on this PW. C = 0 No control word present on this PW." ::= { zxr10L2vpnPwEntry 12 } zxr10L2vpnPwLocalMTU OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The PW's local MTU value.This is the Maximum Transmission Unit, excluding encapsulation overhead, of the egresspacket interface that will be transmitting the decapsulated PDUthat is received from the MPLS-enabled network. This parameter is applicable only to PWs transporting packets and is REQUIRED for these PW types. If this parameter does not match in both directions of a specific PW, that PW MUST NOT be enabled." ::= { zxr10L2vpnPwEntry 13 } zxr10L2vpnPwLocalDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The PW's local descripton. This arbitrary, and OPTIONAL, interface description string is used to send a human-readable administrative string describing the interface to the remote. This parameter is OPTIONAL and is applicable to all PW types. The interface description parameter string length is variable and can be from 0 to 80 octets. Human-readable text MUST be provided in the UTF-8 charset using the Default Language." ::= { zxr10L2vpnPwEntry 14 } zxr10L2vpnPwLocalStatusWord OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The PW's local status value. Each bit in the status code field can be used to indicate a single failure or an event. When a PW is first set up, the PEs MUST attempt to negotiate the usage of the PW status TLV." ::= { zxr10L2vpnPwEntry 15 } zxr10L2vpnPwLocalStatusSignalAbility OBJECT-TYPE SYNTAX INTEGER{ osbits(1), pfsbit(2), rssbit(3), none(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The PW's local status signal ability. Osbits represents support pw operational status notification, PFSbit represents support preferred forwarding status notification, RSSbit represents support requested switchover status notification, None represents do not support any pw status notification." ::= { zxr10L2vpnPwEntry 16 } zxr10L2vpnPwRemoteGroupId OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The PW's remote GroupId value.It is an arbitrary 32-bit value that represents a group of PWs that is used to create groups in the PW space.The group ID is intended to be used as a port index, or a virtual tunnel index.To simplify configuration, a particular PW ID at ingress could be part of the virtual tunnel for transport to the egress router The Group ID is very useful for sending wild card label withdrawals, or PW wild card status notification messages to remote PEs upon physical port failure." ::= { zxr10L2vpnPwEntry 17 } zxr10L2vpnPwRemoteCbit OBJECT-TYPE SYNTAX INTEGER { off(0), on(1)} MAX-ACCESS read-only STATUS current DESCRIPTION "The PW's remote ability weather it is supporting CBit. The bit (C) is used to flag the presence of a control word as follows:C = 1 Control word present on this PW. C = 0 No control word present on this PW." ::= { zxr10L2vpnPwEntry 18 } zxr10L2vpnPwRemoteMTU OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The PW's remote MTU value.This is the Maximum Transmission Unit, excluding encapsulation overhead, of the egresspacket interface that will be transmitting the decapsulated PDUthat is received from the MPLS-enabled network. This parameter is applicable only to PWs transporting packets and is REQUIRED for these PW types. If this parameter does not match in both directions of a specific PW, that PW MUST NOT be enabled." ::= { zxr10L2vpnPwEntry 19 } zxr10L2vpnPwRemoteDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The PW's remote descripton. This arbitrary, and OPTIONAL, interface description string is used to send a human-readable administrative string describing the interface to the remote. This parameter is OPTIONAL and is applicable to all PW types. The interface description parameter string length is variable and can be from 0 to 80 octets. Human-readable text MUST be provided in the UTF-8 charset using the Default Language." ::= { zxr10L2vpnPwEntry 20 } zxr10L2vpnPwRemoteStatusWord OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The PW's remote status value. Each bit in the status code field can be used to indicate a single failure or an event. When a PW is first set up, the PEs MUST attempt to negotiate the usage of the PW status TLV." ::= { zxr10L2vpnPwEntry 21 } zxr10L2vpnPwRemoteStatusSignalAbility OBJECT-TYPE SYNTAX INTEGER{ osbits(1), pfsbit(2), rssbit(3), none(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The PW's remote status signal ability. Osbits represents support pw operational status notification, PFSbit represents support preferred forwarding status notification, RSSbit represents support requested switchover status notification, None represents do not support any pw status notification." ::= { zxr10L2vpnPwEntry 22 } zxr10L2vpnPwNegoedCbit OBJECT-TYPE SYNTAX INTEGER{ off(0), on(1)} MAX-ACCESS read-only STATUS current DESCRIPTION "The PW's negotiated ability weather it is supporting CBit. The bit (C) is used to flag the presence of a control word as follows:C = 1 Control word present on this PW. C = 0 No control word present on this PW." ::= { zxr10L2vpnPwEntry 23 } zxr10L2vpnPwNegoedMTU OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The PW's negotiated MTU value.This is the Maximum Transmission Unit, excluding encapsulation overhead, of the egresspacket interface that will be transmitting the decapsulated PDUthat is received from the MPLS-enabled network. This parameter is applicable only to PWs transporting packets and is REQUIRED for these PW types. If this parameter does not match in both directions of a specific PW, that PW MUST NOT be enabled." ::= { zxr10L2vpnPwEntry 24 } zxr10L2vpnPwNegoedStatusSignalAbility OBJECT-TYPE SYNTAX INTEGER{ osbits(1), pfsbit(2), rssbit(3), none(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The PW's negotiated status signal ability. Osbits represents support pw operational status notification, PFSbit represents support preferred forwarding status notification, RSSbit represents support requested switchover status notification, None represents do not support any pw status notification." ::= { zxr10L2vpnPwEntry 25 } zxr10L2vpnPwSignalState OBJECT-TYPE SYNTAX INTEGER{ down(0), up(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The PW's signal state on protocol level." ::= { zxr10L2vpnPwEntry 26 } zxr10L2vpnPwVccvLocalParas OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The PW's local VCCV value. This VCCV capability information indicates to the receiving PE which combinations of Control Channel (CC) andConnectivity Verification (CV) Types it is capable of receiving. Ifthe receiving PE agrees to establish the PW, it will return its capabilities in the subsequent signaling message to indicate which CC and CV Types it is capable of processing." ::= { zxr10L2vpnPwEntry 27 } zxr10L2vpnPwVccvRemoteParas OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The PW's remote VCCV value. This VCCV capability information indicates to the receiving PE which combinations of Control Channel (CC) andConnectivity Verification (CV) Types it is capable of receiving. Ifthe receiving PE agrees to establish the PW, it will return its capabilities in the subsequent signaling message to indicate which CC and CV Types it is capable of processing." ::= { zxr10L2vpnPwEntry 28 } zxr10L2vpnPwVccvNegoedParas OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The PW's negotiated VCCV value. This VCCV capability information indicates to the receiving PE which combinations of Control Channel (CC) andConnectivity Verification (CV) Types it is capable of receiving. Ifthe receiving PE agrees to establish the PW, it will return its capabilities in the subsequent signaling message to indicate which CC and CV Types it is capable of processing." ::= { zxr10L2vpnPwEntry 29 } zxr10L2vpnPwPsnOutLabelDepth OBJECT-TYPE SYNTAX Integer32(0..3) MAX-ACCESS read-only STATUS current DESCRIPTION "The layer of MPLS label in the packet when it crosses Core Network." ::= { zxr10L2vpnPwEntry 30 } zxr10L2vpnPwPsnOutLabel1 OBJECT-TYPE SYNTAX Integer32(0..1048575) MAX-ACCESS read-only STATUS current DESCRIPTION "A 20-bit quantity containing a value that represents the botton of MPLS label stack.In L2VPN network, this label means the VC label." ::= { zxr10L2vpnPwEntry 31 } zxr10L2vpnPwPsnOutLabel2 OBJECT-TYPE SYNTAX Integer32(0..1048575) MAX-ACCESS read-only STATUS current DESCRIPTION "A 20-bit quantity containing a value that represents the second layer of MPLS label stack from the bottom of MPLS label." ::= { zxr10L2vpnPwEntry 32 } zxr10L2vpnPwPsnOutLabel3 OBJECT-TYPE SYNTAX Integer32(0..1048575) MAX-ACCESS read-only STATUS current DESCRIPTION "A 20-bit quantity containing a value that represents the third layer of MPLS label stack from the bottom of MPLS label." ::= { zxr10L2vpnPwEntry 33 } zxr10L2vpnPwPsnTunnelType OBJECT-TYPE SYNTAX INTEGER{ ldp(1), te(2), bgp(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The tunnel type of Core Network,including (1)LDP label (2)TE label,and (3)BGP label." ::= { zxr10L2vpnPwEntry 34 } zxr10L2vpnPwPsnTunnelId OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The tunnel ID number of Core Network." ::= { zxr10L2vpnPwEntry 35 } zxr10L2vpnPwSwitchMacWithdraw OBJECT-TYPE SYNTAX INTEGER{ on(1), off(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "The PW's local ability,whether the PW can send Mac-withdraw message.The bit is used to flag the presence as follows:Switch = 1 can send mac-withdraw message on this PW. Switch = 0 can't sent mac-withdraw message on this PW." ::= { zxr10L2vpnPwEntry 36 } zxr10L2vpnPwServiceState OBJECT-TYPE SYNTAX INTEGER{ unknown(0), down(1), up(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The service-state of PW ,including (1)down, and (2) up,and (3)unknown." ::= { zxr10L2vpnPwEntry 37 } zxr10L2vpnPwWorkState OBJECT-TYPE SYNTAX INTEGER{ unknown(0), active(1), standby(2), down(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The work-state of PW ,including (1)down, and (2) active,and (3)standby,and (4)unknown." ::= { zxr10L2vpnPwEntry 38 } zxr10L2vpnPwSwitchSplitHorizone OBJECT-TYPE SYNTAX INTEGER{ null(0), on(1), off(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Split-horizon attribute which used in E-tree service includes two types on/off " ::= { zxr10L2vpnPwEntry 39 } zxr10L3vpnPwSwitchGroupID OBJECT-TYPE SYNTAX Integer32(0..64) MAX-ACCESS read-only STATUS current DESCRIPTION "Split-horizon-Group attribute ." ::= { zxr10L2vpnPwEntry 40 } --*************zxr10L2vpnServiceTable*************** zxr10L2vpnServiceTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10L2vpnServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Service Table. This table contains one entry per Service table." ::= { zxr10l2vpnObjects 5 } zxr10L2vpnServiceEntry OBJECT-TYPE SYNTAX Zxr10L2vpnServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The parameter of a Service entity containing " INDEX { zxr10L2vpnServiceName,zxr10L2vpnServiceType } ::= { zxr10L2vpnServiceTable 1 } Zxr10L2vpnServiceEntry ::= SEQUENCE { zxr10L2vpnServiceName DisplayString, zxr10L2vpnServiceType INTEGER, zxr10L2vpnServiceSac1Name DisplayString, zxr10L2vpnServiceSac2Name DisplayString, zxr10L2vpnServiceSdu1Name DisplayString, zxr10L2vpnServiceSdu2Name DisplayString, zxr10L2vpnServiceMTU Integer32, zxr10L2vpnServiceMspwFirstPwPeer IpAddress, zxr10L2vpnServiceMspwFirstPwVcid Unsigned32, zxr10L2vpnServiceMspwFirstPWVcType L2vpnPWType, zxr10L2vpnServiceMspwSecondPwPeer IpAddress, zxr10L2vpnServiceMspwSecondPwVcid Unsigned32, zxr10L2vpnServiceMspwSecondPwVcType L2vpnPWType } zxr10L2vpnServiceName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the service instance.It consists of 'Forwarder' modules connected by pseudowires and Attach Circuit." ::= { zxr10L2vpnServiceEntry 1 } zxr10L2vpnServiceType OBJECT-TYPE SYNTAX INTEGER { unknown(0), vpls(1), vpws(2), mspw(3), vlss(4), enhanced-vpws(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of service instance.There are several types of L2VPNs:(1)Virtual Private LAN Service(VPLS), and (2)Virtual Private Wire Service(VPWS) (3)Multi-segment Pseudowire(MSPW),and (4)Virtual Local Switching Service(VLSS),and (5)Enhanced-Virtual Private Wire Service(Enhanced-VPWS) " ::= { zxr10L2vpnServiceEntry 2 } zxr10L2vpnServiceSac1Name OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The first name of Service Attachment Circuit(SAC)." ::= { zxr10L2vpnServiceEntry 3 } zxr10L2vpnServiceSac2Name OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The second name of Service Attachment Circuit(SAC)." ::= { zxr10L2vpnServiceEntry 4 } zxr10L2vpnServiceSdu1Name OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The first name of Service Distribution Unit (SDU)." ::= { zxr10L2vpnServiceEntry 5 } zxr10L2vpnServiceSdu2Name OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The second name of Service Distribution Unit (SDU)." ::= { zxr10L2vpnServiceEntry 6 } zxr10L2vpnServiceMTU OBJECT-TYPE SYNTAX Integer32(68..9216) MAX-ACCESS read-only STATUS current DESCRIPTION "The VPLS's MTU value.This is the Maximum Transmission Unit,excluding encapsulation overhead, of the egresspacket interface that will be transmitting the decapsulated PDUthat is received from the MPLS-enabled network. This parameter is applicable only to PWs transporting packets and is REQUIRED for these PW types.If this parameter does not match in both directions of a specific PW, that PW MUST NOT be enabled." ::= { zxr10L2vpnServiceEntry 7 } zxr10L2vpnServiceMspwFirstPwPeer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The PW's remote endpoint address." ::= { zxr10L2vpnServiceEntry 8 } zxr10L2vpnServiceMspwFirstPwVcid OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "A non-zero 32-bit connection ID that, together with the PW type, identifies a particular PW. Note that the PW ID and the PW type MUST be the same at both endpoints." ::= { zxr10L2vpnServiceEntry 9 } zxr10L2vpnServiceMspwFirstPWVcType OBJECT-TYPE SYNTAX L2vpnPWType MAX-ACCESS read-only STATUS current DESCRIPTION "A 15-bit quantity containing a value that represents the type of PW. Assigned values are specified in 'IANA Allocations for Pseudowire Edge to Edge Emulation (PWE3)'." ::= { zxr10L2vpnServiceEntry 10 } zxr10L2vpnServiceMspwSecondPwPeer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The PW's remote endpoint address." ::= { zxr10L2vpnServiceEntry 11 } zxr10L2vpnServiceMspwSecondPwVcid OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "A non-zero 32-bit connection ID that, together with the PW type, identifies a particular PW. Note that the PW ID and the PW type MUST be the same at both endpoints." ::= { zxr10L2vpnServiceEntry 12 } zxr10L2vpnServiceMspwSecondPwVcType OBJECT-TYPE SYNTAX L2vpnPWType MAX-ACCESS read-only STATUS current DESCRIPTION "A 15-bit quantity containing a value that represents the type of PW. Assigned values are specified in 'IANA Allocations for Pseudowire Edge to Edge Emulation (PWE3)'." ::= { zxr10L2vpnServiceEntry 13 } --*************zxr10L2vpnVplsTable*************** zxr10L2vpnVplsTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10L2vpnVplsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Vpls Table. This table contains one entry per Vpls table." ::= { zxr10l2vpnObjects 6 } zxr10L2vpnVplsEntry OBJECT-TYPE SYNTAX Zxr10L2vpnVplsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The parameter of a Vpls entity containing " INDEX { zxr10L2vpnVplsName } ::= { zxr10L2vpnVplsTable 1 } Zxr10L2vpnVplsEntry ::= SEQUENCE { zxr10L2vpnVplsName DisplayString, zxr10L2vpnVplsApplication INTEGER, zxr10L2vpnVplsModelType INTEGER, zxr10L2vpnVplsServiceMTU Integer32, zxr10L2vpnVplsSwitchMacLearning INTEGER, zxr10L2vpnVplsSwitchMacAging INTEGER, zxr10L2vpnVplsSwitchStatistics INTEGER, zxr10L2vpnVplsSwitchMacWithdraw INTEGER, zxr10L2vpnVplsTimerMacAging Integer32, zxr10L2vpnVplsAntimovePolicy INTEGER, zxr10L2vpnVplsL2ptPolicyLACP L2vpnVplsPolicy, zxr10L2vpnVplsL2ptPolicyDot1X L2vpnVplsPolicy, zxr10L2vpnVplsL2ptPolicyGARP L2vpnVplsPolicy, zxr10L2vpnVplsL2ptPolicySTP L2vpnVplsPolicy, zxr10L2vpnVplsL2ptPolicyLLDP L2vpnVplsPolicy, zxr10L2vpnVplsL2ptPolicyDot3X L2vpnVplsPolicy, zxr10L2vpnVplsL2ptPolicyALL L2vpnVplsPolicy, zxr10L2vpnVplsL2ptPolicyAllBridgeMulticast L2vpnVplsPolicy, zxr10L2vpnVplsL2ptPolicyZDPZTP L2vpnVplsPolicy } zxr10L2vpnVplsName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of VPLS instance." ::= { zxr10L2vpnVplsEntry 1 } zxr10L2vpnVplsApplication OBJECT-TYPE SYNTAX INTEGER { unknown(0), vpls(1), enhanced-vpls(5), enhanced-vpws(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of service instance.There are several types of L2VPNs:(1)Virtual Private LAN Service(VPLS), and (2)Enhanced-Virtual Private LAN Service(Enhanced-VPLS), and (3)Enhanced-Virtual Private Wire Service(Enhanced-VPWS) " ::= { zxr10L2vpnVplsEntry 2 } zxr10L2vpnVplsModelType OBJECT-TYPE SYNTAX INTEGER { rfc4664model2(0), rfc4664model3(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The model of the instance.It consists of (1)rfc4447model2(0) and (2)rfc4447model3(1)." ::= { zxr10L2vpnVplsEntry 3 } zxr10L2vpnVplsServiceMTU OBJECT-TYPE SYNTAX Integer32(68..9216) MAX-ACCESS read-only STATUS current DESCRIPTION "The VPLS's MTU value.This is the Maximum Transmission Unit,excluding encapsulation overhead, of the egresspacket interface that will be transmitting the decapsulated PDUthat is received from the MPLS-enabled network. This parameter is applicable only to PWs transporting packets and is REQUIRED for these PW types.If this parameter does not match in both directions of a specific PW, that PW MUST NOT be enabled." ::= { zxr10L2vpnVplsEntry 4 } zxr10L2vpnVplsSwitchMacLearning OBJECT-TYPE SYNTAX INTEGER { on(1), off(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "L2vpn VPLS MAC learning switch." ::= { zxr10L2vpnVplsEntry 5 } zxr10L2vpnVplsSwitchMacAging OBJECT-TYPE SYNTAX INTEGER { on(1), off(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "L2vpn VPLS MAC aging time switch." ::= { zxr10L2vpnVplsEntry 6 } zxr10L2vpnVplsSwitchStatistics OBJECT-TYPE SYNTAX INTEGER { on(1), off(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "L2vpn VPLS MAC statistics time switch." ::= { zxr10L2vpnVplsEntry 7 } zxr10L2vpnVplsSwitchMacWithdraw OBJECT-TYPE SYNTAX INTEGER { on(1), off(0) } MAX-ACCESS read-only STATUS current DESCRIPTION "L2vpn VPLS MAC withdraw time switch." ::= { zxr10L2vpnVplsEntry 8 } zxr10L2vpnVplsTimerMacAging OBJECT-TYPE SYNTAX Integer32(60..630) MAX-ACCESS read-only STATUS current DESCRIPTION "L2vpn VPLS MAC aging timer." ::= { zxr10L2vpnVplsEntry 9 } zxr10L2vpnVplsAntimovePolicy OBJECT-TYPE SYNTAX INTEGER { unfixed(0), local-fixed(1), remote-fixed(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "L2vpn VPLS anitmove policy." DEFVAL { 0 } ::= { zxr10L2vpnVplsEntry 10 } zxr10L2vpnVplsL2ptPolicyLACP OBJECT-TYPE SYNTAX L2vpnVplsPolicy MAX-ACCESS read-only STATUS current DESCRIPTION "L2vpn VPLS L2pt policy for LACP." ::= { zxr10L2vpnVplsEntry 11 } zxr10L2vpnVplsL2ptPolicyDot1X OBJECT-TYPE SYNTAX L2vpnVplsPolicy MAX-ACCESS read-only STATUS current DESCRIPTION "L2vpn VPLS L2pt policy for Dot1x." ::= { zxr10L2vpnVplsEntry 12 } zxr10L2vpnVplsL2ptPolicyGARP OBJECT-TYPE SYNTAX L2vpnVplsPolicy MAX-ACCESS read-only STATUS current DESCRIPTION "L2vpn VPLS L2pt policy for GARP." ::= { zxr10L2vpnVplsEntry 13 } zxr10L2vpnVplsL2ptPolicySTP OBJECT-TYPE SYNTAX L2vpnVplsPolicy MAX-ACCESS read-only STATUS current DESCRIPTION "L2vpn VPLS L2pt policy for STP." ::= { zxr10L2vpnVplsEntry 14 } zxr10L2vpnVplsL2ptPolicyLLDP OBJECT-TYPE SYNTAX L2vpnVplsPolicy MAX-ACCESS read-only STATUS current DESCRIPTION "L2vpn VPLS L2pt policy for LLDP." ::= { zxr10L2vpnVplsEntry 15 } zxr10L2vpnVplsL2ptPolicyDot3X OBJECT-TYPE SYNTAX L2vpnVplsPolicy MAX-ACCESS read-only STATUS current DESCRIPTION "L2vpn VPLS L2pt policy for Dot3X." ::= { zxr10L2vpnVplsEntry 16 } zxr10L2vpnVplsL2ptPolicyALL OBJECT-TYPE SYNTAX L2vpnVplsPolicy MAX-ACCESS read-only STATUS current DESCRIPTION "L2vpn VPLS L2pt policy for ALL." ::= { zxr10L2vpnVplsEntry 17 } zxr10L2vpnVplsL2ptPolicyAllBridgeMulticast OBJECT-TYPE SYNTAX L2vpnVplsPolicy MAX-ACCESS read-only STATUS current DESCRIPTION "L2vpn VPLS L2pt policy for AllBridgeMulticast." ::= { zxr10L2vpnVplsEntry 18 } zxr10L2vpnVplsL2ptPolicyZDPZTP OBJECT-TYPE SYNTAX L2vpnVplsPolicy MAX-ACCESS read-only STATUS current DESCRIPTION "L2vpn VPLS L2pt policy for ZDPZTP." ::= { zxr10L2vpnVplsEntry 19 } END